Good hint about the oil. It makes sense. Thanks!
Glenn Henderson
On Thu, Feb 15, 2024 at 4:38 PM Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> I just went through all that myself in the last couple of years. Kind of
> like filling your car tires. At first, I borrowed one of my
I just went through all that myself in the last couple of years. Kind of
like filling your car tires. At first, I borrowed one of my crewmates
nitrogen tank and regulator, as he had one for his airplane landing gear. I
think it only went to 500 lb. Plus it was a little constraining with the
Didn you recondition a boom vang? If so, where did you get the nitrogen
recharge accomplished?
Glenn Henderson
WeGo
C 41
On Thu, Feb 15, 2024 at 12:10 PM Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:
> Glad it worked for you. You're welcome.
>
> Dennis C.
> Touche' 35-1 #83
>
Glad it worked for you. You're welcome.
Dennis C.
Touche' 35-1 #83
Mandevile, LA
On Wed, Feb 14, 2024, 7:15 AM Tom A via CnC-List
wrote:
> Shout out to Dennis for helping me replace the end seals on my Navtec,
>
> Tom A
>
>
> Please show your appreciation for this list and the Photo Album
Shout out to Dennis for helping me replace the end seals on my Navtec,
Tom A
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
p.m. (GMT-05:00) To: Stus-List
, CnClist Cc: cenel...@aol.com
Subject: Stus-List Re: Navtec hydraulic backstay - amateur rebuild
Great detailed write-up Dennis! If I had known it was coming, I might have done
the equivalent rebuild of my 28 year old Navtec/Sailtec unit myself. Alas, I
just
Great detailed write-up Dennis!
If I had known it was coming, I might have done the equivalent rebuild of my 28
year old Navtec/Sailtec unit myself. Alas, I just picked it up from my local
hydraulic shop after a complete rebuild including the internal seals, etc.
about 3 weeks ago!
Initially
Dennis, this is super description complete with part numbers. Thanks!
Interested to hear any updates on your diy assembly.
The Navtec on my 37 doesn’t leak fluid, but may be low or time to change.
Recovery after each pump is slow.
Peter McMinn
_/)
On Sun, Jan 7,
Thank you for sharing this. I will keep it as reference.
C 33-2
Bruno Lachance
Le 7 janv. 2024 à 15:45, Dennis C. via CnC-List a écrit
:
A fellow boater had a Navtec integral hydraulic backstay adjuster that blew the
top seal. As many of you know, this is probably the most common failure
Very cool write-up and project. Thanks for sharing.
From: Dennis C. via CnC-List
Sent: Sunday, January 7, 2024 3:44 PM
To: CnClist
Cc: Dennis C.
Subject: Stus-List Navtec hydraulic backstay - amateur rebuild
A fellow boater had a Navtec integral hydraulic backstay adjuster that blew the
top
10 matches
Mail list logo