Hello Dean,
Not sure you need to add an additional backing plate unless you are
putting the winch somewhere that there wasn't one before. There is a thick
solid plywood core where the primary winches are mounted on my 1981
C and they don't put a backing plate under it in the factory. I
replaced
Make your own ‘glass backing sheets
http://cncwindstar.blogspot.com/2015/12/making-fibreglass-parts.html?m=1
Dave - ex 33-2. Windstar
On Fri, Mar 22, 2024 at 8:26 PM Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:
> Don’t use plywood. Aluminum or G10.
>
> Joel
>
>
>
> On Fri, Mar
Don’t use plywood. Aluminum or G10.
Joel
On Fri, Mar 22, 2024 at 8:24 PM Dean McNeill via CnC-List <
cnc-list@cnc-list.com> wrote:
> I'm about to finally replace my old 2 speed Barient 25 primary winches on
> my C 34, with Harken 46 Self tailing winches.
> Anyone have experience doing a
I'm about to finally replace my old 2 speed Barient 25 primary winches on my
C 34, with Harken 46 Self tailing winches.
Anyone have experience doing a similar swap? I fully expect I’ll need to fill
old holes and drill new ones. And probably glass in aluminum or plywood backing
plates.
Any
