El día Friday, March 06, 2009 a las 08:54:49AM +0100, Ed Kapitein escribió:
On Fri, 2009-03-06 at 07:52 +0100, Matthias Apitz wrote:
Hi,
The question is seriously, so please don't respond with 'use the right
finger': How can I generate the X11 event ButtonPress/ButtonRelease for
Ed Kapitein e...@kapitein.org writes:
The way i work arround this is by having an xmessage with three buttons.
xmodmap did not work for me with Xglamo, are you using Xorg?
___
Openmoko community mailing list
community@lists.openmoko.org
On Fri, 2009-03-06 at 09:04 +0100, Matthias Apitz wrote:
El día Friday, March 06, 2009 a las 08:54:49AM +0100, Ed Kapitein escribió:
On Fri, 2009-03-06 at 07:52 +0100, Matthias Apitz wrote:
Hi,
The question is seriously, so please don't respond with 'use the right
finger': How
El día Friday, March 06, 2009 a las 09:27:03AM +0100, Ed Kapitein escribió:
Sure, it is at http://www.kapitein.org/openmoko/mod_mouse
But be aware, i run this script on the host where i connect to, not on
the freerunner itself.
i use kde, so i added a symlink to the script in
Matthias Apitz ha scritto:
Hi,
The question is seriously, so please don't respond with 'use the right
finger': How can I generate the X11 event ButtonPress/ButtonRelease for
button 3, i.e. the right button of the mouse, with the touchpad of the
FR? Thx
Sorry for that, I was in funny
Andy Green wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| I have suggested a refinement on the second approach: short the small
| capacitors. Add big caps outside the shielded unit - there are places
| with room. But don't put wires from
Esben Stien wrote:
Stefan Monnier monn...@iro.umontreal.ca writes:
(if I could use it as an MP3 player, I'd carry it with me that much
more often
Until a fix, you can plug in a USB headset;).
Won't that rule out simultanous charging with the usb car charger?
Anyway, some setup will be
Carlo Minucci wrote:
* delete freespace check and progress bar
* now work with tangogps default config file
* work in SHR too (i hope :) )
* change icon with a picture taken during my holiday in Vespa :)
It works on SHR testing indeed. Nice icon! :-)
Helge Hafting
Hi all,
for those of you who didn't see the blog on Openmoko-Planet or read the SHR
Mailinglist... We did publish new testing images.
Get them at http://build.shr-project.org/shr-testing/ but read the announcement
first: http://blog.shr-project.org/2009/03/time-for-testing.html
We hope you
Have you tried tweaking the alsa profiles and set Bass Filter to
either 100Hz @ 8kHz (== 600Hz @ 48kHz) or 200Hz @ 8kHz (== 1200Hz @
48kHz) and Bass Boost to 15? I find the quality just fine for eg.
any chance somebody translates that audiophile gibberish into alsa state
file gibberish?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| There are a couple of 1K resistors to 0V that will then connect directly
| ~ to the amp outputs all the time before the new DC blocking caps you
| will add back in. But thanks to some recent patches by
On Thu, Mar 5, 2009 at 6:49 PM, Petr Vanek van...@penguin.cz wrote:
On Thu, 5 Mar 2009 17:58:11 +0100
Tony Berth tonybe...@googlemail.com (TB) wrote:
it seems that there is no log generated!
I'm using the latest package on the latest SHR unstable image!
Thanks
Tony
You have to
Klaus 'mrmoku' Kurzmann wrote:
Hi all,
for those of you who didn't see the blog on Openmoko-Planet or read the SHR
Mailinglist... We did publish new testing images.
Time for re-install by image or is opkg upgrade safe?
--
Imagination is more important than knowledge.
Albert Einstein
Michael 'Mickey' Lauer wrote:
Mikko, thanks for this posting. I almost agree with everything. Although
in the age of Android it's kind of tough to motivate people working on
a truly free GNU/Linux stack, I'm sure we (as in freesmartphone.org and
Openmoko Inc.) are doing the right thing.
My
Hi all,
I have for now disabled the opkg.org repo on my FreeRunner. It kept
disturbing opkg update and opkg upgrade. It also offers packages like
cellhunter which are not hosted on opkg.org, are identical in files, but
result in segmentation fault of opkg.
So back to normal and explicit opkg
Al Johnson wrote:
On Thursday 05 March 2009, Helge Hafting wrote:
Fixing this in advance is a better approach - but I'd rather spend time
on a much better fix using libcurl. That would speed yaouh up further
also. But this have to wait until someone ports pycurl to the freerunner.
No
If I submit data, when is it available on the online database and
OSM/Google maps?
Tony Berth wrote:
On Thu, Mar 5, 2009 at 6:49 PM, Petr Vanek van...@penguin.cz
mailto:van...@penguin.cz wrote:
On Thu, 5 Mar 2009 17:58:11 +0100
Tony Berth tonybe...@googlemail.com
Am Freitag 06 März 2009 10:47:20 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Hi all,
for those of you who didn't see the blog on Openmoko-Planet or read the
SHR Mailinglist... We did publish new testing images.
Time for re-install by image or is opkg upgrade safe?
See the
Anyway, some setup will be necessary, right? A usb headset headset will
be a completely new sound device. Can the phone detect it when it gets
plugged in, and then do all the configuration? So the sound player will
just work Or will we have to go into the settings and change between
host and
Hi,
this teasing blog post[0] inspired the following idea. If have no idea
what this thing on the picture will really be but it could be a
mainboard that fits into the case of a freerunner.
The Samsung CPU in the Freerunner is for ARM what a 386 is for x86
architecture. Even the old N770 had a
think I can 'borrow' one from Debian;
well, why don't you borrow xorg-xserver-input-tslib as well? or at least
libgtkstylus.so?
2008.9 uses xorg, right?
___
Openmoko community mailing list
community@lists.openmoko.org
Tony Berth wrote:
On Thu, Mar 5, 2009 at 4:19 PM, Helge Hafting helge.haft...@hist.no
mailto:helge.haft...@hist.no wrote:
Tony Berth wrote:
after installing the latest SHR-unstable immage and tried to edit the
tangoGPS config parameters, when saving the application crashes!
Daniel Benoy wrote:
I'm working on a script that will detect which network interfaces are
connected and mess with the routing accordingly, but I'm having trouble
detecting whether my USB ethernet gadget connection is up or down.
ethtool when it's up:
lisa:~# ethtool usb0
Settings
It works very well and is lots of fun. Maybe a little too sensitive?
But many thanks for that one!
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 10:47:20 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Hi all,
for those of you who didn't see the blog on Openmoko-Planet or read the
SHR Mailinglist... We did publish new testing images.
Time for re-install by image or is
HouYu Li wrote(a):
Now, the image, binary and details is here:
http://dashi-x02.karadog.net/~lihouyu/qtextended/4.4.3/
Great, i will gladly test it.
Now that we have last release from Nokia would it be possible
to setup public repository with patches from comunity?
I would like to
Hi all,
What is the webbrowser to use in testing? Dillo is a bit old and the new
dillo will not install due to missing packages. How to solve this or
what alternatives exist?
Regards,
Pander
___
Openmoko community mailing list
Pander wrote:
Hi all,
What is the webbrowser to use in testing? Dillo is a bit old and the new
dillo will not install due to missing packages. How to solve this or
what alternatives exist?
opkg install dillo work fine in SHR testing, if you have the opkg.org
repository configured. Or just
Am Freitag 06 März 2009 11:13:41 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 10:47:20 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Hi all,
for those of you who didn't see the blog on Openmoko-Planet or read the
SHR Mailinglist... We did
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 11:13:41 schrieb Tilman Baumann:
Or should I just go testing anyway because unstable is really not
intended for real use?
Well... if you need it as a phone you should switch to testing. We intend to
do
some big changes that most
alternatives: midori or minino
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
2008.9 uses xorg, right?
No:
yes, it does.
xorg as opposed to framebuffer (like, qtopia).
i am not sure, though, how good tslib works with (your current) xglamo --
and libgtkstylus.so does gtk-apps only, iirc.
___
Openmoko community mailing list
Richy wrote (ao):
alternatives: midori or minino
Minimo is replaced by Fennec:
http://en.wikipedia.org/wiki/Minimo
This project has been replaced by Mozilla Fennec
--
Humilis IT Services and Solutions
http://www.humilis.net
___
Openmoko
Try links-x11. It's fast, it has working ssl.
Netsurf is also interesing.
Leonti
On Fri, Mar 6, 2009 at 11:48 AM, Sander openm...@humilis.net wrote:
Richy wrote (ao):
alternatives: midori or minino
Minimo is replaced by Fennec:
http://en.wikipedia.org/wiki/Minimo
This project has been
On Fri, 6 Mar 2009 9:13:48 pm Radek Polak wrote:
Now that we have last release from Nokia would it be possible
to setup public repository with patches from comunity?
I'm in the process of setting up a repository on github for just that reason!
--
Chris Samuel : http://www.csamuel.org/ :
Hi!
http://www.google.com/gwt/n - here you can optimize webb pages for pda
use - very useful for expensive gprs connection.
Did not know about this before today, so just had to share in case
someone else finds it useful.
Leonti
___
Openmoko community
Chris Samuel wrote:
ublic repository with patches from comunity?
I'm in the process of setting up a repository on github for just that reason!
Great, let us know when you are done!
Radek
___
Openmoko community mailing list
Dear list:
Here comes the 13th community updates.
http://wiki.openmoko.org/wiki/Community_Updates/March_6%2C_2009
As usual I would like to thanks for everyone who contribute on this.
During these two weeks , there are many exciting news here. Openmoko has
announced Om 2009 release plan,
On Fri, 6 Mar 2009 10:24:54 pm Radek Polak wrote:
Great, let us know when you are done!
I'm doing a git push now, and it's going to take a long time to finish over
this ADSL link (it did 3% in about 10 minutes).
When it completes it's going to be here:
2009/3/6 arne anka openm...@ginguppin.de:
Have you tried tweaking the alsa profiles and set Bass Filter to
either 100Hz @ 8kHz (== 600Hz @ 48kHz) or 200Hz @ 8kHz (== 1200Hz @
48kHz) and Bass Boost to 15? I find the quality just fine for eg.
any chance somebody translates that audiophile
On Fri, 06 Mar 2009 11:04:40 +0100
Helge Hafting helge.haft...@hist.no wrote:
Daniel Benoy wrote:
I'm working on a script that will detect which network interfaces
are connected and mess with the routing accordingly, but I'm having
trouble detecting whether my USB ethernet gadget
OK, actually. I was talking with lpotter in IRC channel #qtopia at FreeNode
about the further improvement of QTextended. He will setup a git repository
based on the 4.4.3 release source by the end of this week. Just waiting for
a while. We are going to move QTextended to kernel 2.6.28.
On Fri,
On Fri, 6 Mar 2009 11:59:58 pm HouYu Li wrote:
OK, actually. I was talking with lpotter in IRC channel #qtopia at FreeNode
about the further improvement of QTextended. He will setup a git repository
based on the 4.4.3 release source by the end of this week. Just waiting for
a while. We are
Thanks, have added the site to my office blacklists - was letting me
access all sorts of blocked content through the innocuous looking
google.com ;-)
2009/3/6 Leonti Bielski prishe...@gmail.com:
Hi!
http://www.google.com/gwt/n - here you can optimize webb pages for pda
use - very useful for
On Thu, 2009-03-05 at 22:27 +0100, Francesco de Virgilio wrote:
It seems not work on SHR-testing :(
That's normal...you are using the gpsd bindings on your desktop
computer.
They permit you to talk to a gpsd compatible device
I tested it with fso-gpsd(python on my desktop with the gpsd
This may be intentional, because the usb0 interface continues to exist whether
it's connected or not. udev generally concerns itself with devices which
hotplug in and out of existence. In the case of g_ether, you can set the IP on
it and it'll just keep it forever.
Also if you want to make
I am having OM 2008.12 but it has only a few features when i checked the
/usr/share/dbus-1/ folder.
--- On Fri, 3/6/09, Timo Juhani Lindfors timo.lindf...@iki.fi wrote:
From: Timo Juhani Lindfors timo.lindf...@iki.fi
Subject: Re: How to install cli-framework on my Neo FreeRunner
To: List
Hey all,
I just ran an upgrade yesterday after seeing some issues resolved with
the frameworkd upgrade package and now my screen is empty. If I
switch to the slider icons, my applications are back, but I find that
interface too touchy and annoying to use, so I would like my icons
back.
Does
Dylan Reilly wrote:
Curse all these python 2.5 versus 2.6 issues! The mutagen package was
actually built for 2.5 and not 2.6 (my fault). I have fixed this and
uploaded a new version to opkg.org. Note that I changed the version
number.
I have also added a list of the dependencies and where
On Fri, Mar 6, 2009 at 10:58 AM, Helge Hafting helge.haft...@hist.nowrote:
Tony Berth wrote:
On Thu, Mar 5, 2009 at 4:19 PM, Helge Hafting helge.haft...@hist.no
mailto:helge.haft...@hist.no wrote:
Tony Berth wrote:
after installing the latest SHR-unstable immage and tried to
kimaidou: Thanks for this, it's nice!
Could you please check the ipk package, there are some information
missing that makes the installation fail in opkg.org repository, see
http://www.opkg.org/packages/Packages
- has voicenote listed but details are missing
r...@om-gta02:~# opkg install
Is this necessary?
Just set a higher metric on usb0, then routes thorough eth0 will be
preferred when available. The default route through usb0 will only be
used as a last resort when there is no other way.
Yes. Packets will route out that interface whether it's connected or not
because
for use cli-framework you need the framework :),
Actual Distros who have it , FSO, SHR, Debian and his derivates, ¿Gentoo?
2009/3/6 sandilya b san_dimi...@yahoo.com:
I am having OM 2008.12 but it has only a few features when i checked the
/usr/share/dbus-1/ folder.
--- On Fri, 3/6/09, Timo
On Friday 06 March 2009 16:01:18 Helge Hafting wrote:
Dylan Reilly wrote:
I have reflashed SHR testing.
Now I can't install mutagen_svn-4350-2_armv4t.ipk
opkg just ends in Terminated no matter how I try. :-(
I have the same problem. It seems opkg.org is truncating files, and almost
every
Can you run:
ar x [package name]
correctly? If not then the package is corrupt. The package I uploaded
to opgk.org is fine. If it got corrupted somewhere in the stream I
cannot be of too much help. You can do what I did to get mutagen in
the first place: install it to your desktop and then copy
On Friday 06 March 2009, Helge Hafting wrote:
Al Johnson wrote:
On Thursday 05 March 2009, Helge Hafting wrote:
Fixing this in advance is a better approach - but I'd rather spend time
on a much better fix using libcurl. That would speed yaouh up further
also. But this have to wait until
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 11:13:41 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 10:47:20 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Hi all,
for those of you who didn't see the blog on Openmoko-Planet or read the
SHR
Hi!
Yesterday I installed Cellhunter 0.4.2.
It works great except for not displaying neighbour cells - they are
all displayed as zeroes.
The main cell is displayed allright.
I'm using Shr-testing and latest framework.
Leonti
___
Openmoko community
Am Freitag 06 März 2009 16:43:47 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 11:13:41 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 10:47:20 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Hi all,
for those
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 16:43:47 schrieb Tilman Baumann:
Looks like the repository is broken.
you catched the moment while building with a new EFL_SRCREV :-) while
building
the packages already built are there, but the index not yet...
That might happen
Risto H. Kurppa wrote:
On Fri, Mar 6, 2009 at 5:16 PM, kimaidou kimai...@gmail.com wrote:
Hi all
Sorry for the delay, but I am really booked !
I have checked my control file. Will the following be enough ?
Package: voicenote
Priority: optional
Section: openmoko/PIM
Version: 0.3
I verify that with the new SHR testing and the same cellhunter version,
that cellhunter it is not reporting on neighbouring cells.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Am Freitag, den 06.03.2009, 17:45 +0100 schrieb Pander:
I verify that with the new SHR testing and the same cellhunter version,
that cellhunter it is not reporting on neighbouring cells.
Please take a look at fso/milestone5.5 branch, Jan added a patch that
makes it work again with the latest
Am Freitag 06 März 2009 17:14:41 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 16:43:47 schrieb Tilman Baumann:
Looks like the repository is broken.
you catched the moment while building with a new EFL_SRCREV :-) while
building the packages already built
I am sorry. I think I did not understand what you said. Ok let me explain what
I am doing. I am SSH'ing into my phone from my laptop and trying to run some
python codes which will let me access the dbus for some phone specific features
like IMEI number etc. However to get these values I was
Michael 'Mickey' Lauer wrote:
Am Freitag, den 06.03.2009, 17:45 +0100 schrieb Pander:
I verify that with the new SHR testing and the same cellhunter version,
that cellhunter it is not reporting on neighbouring cells.
Please take a look at fso/milestone5.5 branch, Jan added a patch that
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 17:14:41 schrieb Tilman Baumann:
Or maybe not, I just remember that our admin has enabled a transparent
proxy. That might give me the old index...
that would indeed be bad then :-)
Indeed. Luckily there was a alternative route which I
So the problem is in FSO?
Why then I get neighbouring cells in zhone and not in Cellhunter?
That kinda excludes problem in framework.
Leonti
On Fri, Mar 6, 2009 at 5:59 PM, Pander pan...@users.sourceforge.net wrote:
Michael 'Mickey' Lauer wrote:
Am Freitag, den 06.03.2009, 17:45 +0100 schrieb
your typical fun-spoiler always turns up.
;-)
De: community-boun...@lists.openmoko.org en nombre de Joseph Reeves
Enviado el: vie 06/03/2009 14:32
Para: List for Openmoko community discussion
Asunto: Re: Google web pages optimizer
Thanks, have added the
Tony Berth a écrit :
which command did you use for that symbolic link?
ln -s ...
(man ln for arguments)
--
Yoann.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
2008.12 uses elements of QtExtended to provide its phone functionality. You
can't simply install the freesmartphone.org framework on 2008.12 as the two
will compete over resources such as the GSM interface, probably breaking both
in the process.
If you want to use the freesmartphone.org
Thanks a lot for the reply. How can I use the dbus and get the values from the
fone. For example.
I want to write a python code that will give the the IMEI number and
manufacturer details of my fone. how can i do that. I understand that once i
have any of the FSO or SHR etc I can do that.
Hello, my goal is not just accessing the GPS device. I'm trying to run on
Openmoko a certain java application that uses librxtx to access the GPS, and
librxtx happens to be in the Openmoko-Jalimo repository. I'm not asking for the
moon
Anybody has used this librxtx?
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 16:43:47 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 11:13:41 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 10:47:20 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann
Am Freitag 06 März 2009 19:34:05 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 16:43:47 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009 11:13:41 schrieb Tilman Baumann:
Klaus 'mrmoku' Kurzmann wrote:
Am Freitag 06 März 2009
That's shr-unstable, so you will experience problems like that. If you
don't want, use shr-testing. Problem is known, you can wait and try to
upgrade every day ;)
___
Openmoko community mailing list
community@lists.openmoko.org
On Wed, 2009-03-04 at 20:34 -0800, c_c wrote:
Hi,
Hans Zimmerman wrote:
I do no longer seem to have a sound card in my FreeRunner as it is not
found. The freerunner is running fso milestone 5.1 with opkg update
opkg
upgrade.
Well, I have this problem too - and I really haven't
I have the same thing. What are these slider icons and how do I get them?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
If you don't know that, you really shouldn't use shr-unstable 8)
But in serious - that's in Illume config, at Launcher position.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Ahh, so I didn't know that one... I'm still learning. ;) Seriously, though,
it's not really worth knowing. That's the most obnoxious and annoying way to
start apps I've ever seen. :P
___
Openmoko community mailing list
community@lists.openmoko.org
At the moment it looks like that the opkg.org repository is very
unstable: packages keep breaking all the time more and more, now I
wasn't install sortdesk anymore. AFAIK nothing has changed in the
package itself.
Tobias: Could you release the scripts that manage the files for public
eye to check
Of course that you shouldn't was a joke, but for me -unstable is for
people, who was in every place available from GUI on his system :D
(like me ;))
___
Openmoko community mailing list
community@lists.openmoko.org
Oh, I was there once upon a time... But I forgot. :)
Meanwhile, the suspend and power off buttons are now greyed out and
unclickable... That's something of a massive problem. Any ideas? :P
___
Openmoko community mailing list
community@lists.openmoko.org
Hello!
I've just installed navit from it's repository.
I use SHR - testing distro.
Fisrt I start TangoGPS and wait for fix (with latest frameworkd it's
quite quick), than, after fix is got and I'm sure fso-gpsd is working
I start Navit.
But nothing indicates that it has found it's position. In
That's only new EFLSRC_REV. We're just switched to it, so it just have
to be polished ;)
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
No idea what ELFSRC_REV is, but if you switched to it, I assume it's better.
:P (I hope)
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Pander schrieb:
I verify that with the new SHR testing and the same cellhunter version,
that cellhunter it is not reporting on neighbouring cells.
mmh, i use shr testing without problems. did you upgrade (i did not)?
the latest fso version requires the patch from jan. i will integrate it
Hello,
I've been tracking OM unstable. Now that Paroli is starting at boot
with a full-screen I can't figure out how to start any other
applications outside of using ssh. Then once started the application
doesn't have the Illume top-bar available to do any of the functions it
provided such as
What does this patch do?
Why Zhone shows neighbouring cells ok, and Cellhunter doesn't?
Leonti
On Fri, Mar 6, 2009 at 11:54 PM, Sebastian Hammerl
list-openm...@omoco.de wrote:
Pander schrieb:
I verify that with the new SHR testing and the same cellhunter version,
that cellhunter it is not
i built gridpad for debian, it runs and i can draw -- but whatever i do,
no chars will ever appear in the terminal nor in leafpad.
i use xfce -- is this thing usable with the enlightment eco system only?
___
Openmoko community mailing list
Leonti Bielski schrieb:
What does this patch do?
Why Zhone shows neighbouring cells ok, and Cellhunter doesn't?
cellhunter uses the dbus fso debug command
zhone the dbus monitor feature
the debug command fails with the latest fso, so the path fetches the
information from the monitor
Hi,
I've been tracking OM unstable. Now that Paroli is starting at boot
with a full-screen I can't figure out how to start any other
applications outside of using ssh. Then once started the application
doesn't have the Illume top-bar available to do any of the functions it
provided such as
On Wednesday 04 March 2009 05:25:58 am arne anka wrote:
When the screen goes dim, a tap of the screen brings the backlight back
up,
but it won't register the taps on the icons or the keyboard, or the lock
screen.
The Xorg log shows:
(EE) PreInit returned NULL for Configured Touchscreen
93 matches
Mail list logo