the low level programming for us.
Greets from Germany
Michael Tansella
Matthias Breuel
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Am Donnerstag, 29. Oktober 2009 23:16:53 schrieb Robin Paulson:
2009/10/30 Neil Jerram neiljer...@googlemail.com:
I'd expect the x and y values to be much smaller than the z values
(compared to the ratios here) because of the z value including
gravity. Am I misunderstanding what the data
Hi,
are there any news about Project B?
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Am Mittwoch, 2. September 2009 22:23:08 schrieb Paul Fertser:
Michael Tansella michael-tanse...@gmx.de writes:
How can I establish a communication connection (I want to transfer Text)
from
You can consider using miredo techonology. That way you don't have
to maintain a special publically
Hi,
How can I establish a communication connection (I want to transfer Text) from
A:
Freerunner
GPRS Vodafone Germany Connection (IP behind NAT)
Qt program that sends for example coordinates
to
B:
Linux Notebook
GPRS Vodafone Germany Connection (IP behind NAT)
Qt program that processes the
Thank you all!!!
I see there are many possibilities. I'll try it with an OpenVPN Server where
the 2 Clients connect to. I Hope latency will be small enough.
All the best
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
Hi,
Same problem here,
can you please post your frameworkd.conf for quick and dirty fix?
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Am Sonntag, 16. August 2009 00:23:31 schrieb Boris Wong:
ssh -l root -X -v 192.168.5.202 midori
That does the trick
Thanks
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Check your DISPLAY
Hans
and how???
On the freerunner env says
DISPLAY=localhost:0
do have to do any:
DISPLAY=:??? dillo
The following doesn't work:
$ DISPLAY=:192.168.178.22:0 dillo
paths: Cannot open file '/home/root/.dillo/dillorc'
paths: Using /etc/dillo/dillorc
paths: Cannot open file
Am Samstag, 15. August 2009 12:33:02 schrieb arne anka:
DISPLAY=:1 foo
... doesn't work for me
simarill...@simarillion-laptop:~$ ssh -X r...@192.168.5.202
r...@om-gta02 ~ $ DISPLAY=:1 dillo
paths: Cannot open file '/home/root/.dillo/dillorc'
paths: Using /etc/dillo/dillorc
paths: Cannot open
Hi,
I want to start midori in the freerunner and forward the GUI tt my Linux Host
(Kubuntu)
I tried it the following way, but it starts on the freerunner instead of the
host, any idea?:
simarill...@simarillion-laptop:~$ ssh -l root -X -v 192.168.5.202
OpenSSH_5.1p1 Debian-5ubuntu1, OpenSSL
Am Mittwoch, 12. August 2009 10:46:03 schrieb Aapo Rantalainen:
I got mail from ad...@projects.openmoko.org when I registered my project:
Thanks ;-)
___
Openmoko community mailing list
community@lists.openmoko.org
Looks really nice.
Perhaps a stupid question. Does it use FSO middleware ?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Am Samstag, 1. August 2009 10:23:05 schrieb Christian Adams:
moinmoin,
Am 31.07.2009 um 11:16 schrieb Michael Tansella:
OK I just deleted the mailing list - I don't need it
Greets
Michael
dumb question: how? maybe i'm to blind to find where/how ..
.. lack of sleep maybe ..
you go
OK I just deleted the mailing list - I don't need it
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
HI,
I'm the developer of openmokoder project:
http://projects.openmoko.org/projects/openmokoder/
Since 3 days I get mails with subject Openmokoder-commits moderator
request(s) waiting but unfortunately I'm unable to log in at
Am Donnerstag, 30. Juli 2009 10:45:08 schrieb arne anka:
Additionally I get Mails from that list with subject:
� VIAGRA � Official Site
openmokoder-commits-ow...@projects.openmoko.org
to what address do you get that spam?
faking the from-header is widely used -- i get a lot of spam sent
I use it the following way
[Desktop Entry]
Name=Take Screenshot
Comment=Save a screenshot or upload it to http://handhelds.org/scap
Exec=sleep 5 gpe-scap
Terminal=0
Type=Application
Icon=gpe-scap.png
Categories=Application
StartupNotify=False
So I push the icon and have 5 seconds to switch to
On Wednesday 10 June 2009 11:57:51 Yorick Moko wrote:
could you give a link to that video again please?
http://www.youtube.com/watch?v=UFuwhPXYxxI
at 18:37
greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
On Friday 22 May 2009 20:10:23 arne anka wrote:
that's maybe rather ot, but since i need it to program _with_ qt _for_ the
freerunner ...
short'n'sweet: has anybody a clear and usable tutorial howto write dbus
apps with qt, notably registering an app to dbus and recieve dbus
signals/events?
On Wednesday 20 May 2009 13:35:42 joa...@verona.se wrote:
I'm trying to solder together a dumb battery with higher capacity for
the FreeRunner. It doesnt work too well, since the power management cant
read the current charge, and decides to shutdown the device. How do I
prevent this?
Remove
Now it should run, but I think it's not
working. There are still some errors with dbus (I think they come with
bluez)
Any progress on this issue?
___
Openmoko community mailing list
community@lists.openmoko.org
So, the fact that when idle the accelerometers report a positive Z value
implies that the Z axe is actually upward.
Agree ?
Yes I think that's right. If you hold the Freerunner that any arrow of an axis
points to the earth middlepoint then the sown value must be negative.
Michael
On Tuesday 07 April 2009 00:24:34 Steve Mosher wrote:
production is not stopping. Sean said explicitly in his Bern address
that there is ample inventory and I'll add that the production
continues. In fact, one of the consequences of suspending GTA03 is that
we can focus
on two things (
On Friday 03 April 2009 11:58:57 Tony Berth wrote:
Dear Group,
just tried the latest SHR unstable (both kernel and jffs) and found
following problems:
- when in the boot screen the device gets listed in my debian server as a
usb one but after booting it dissapears from the list! So can't
On Tuesday 07 April 2009 00:45:05 Cedric Cellier wrote:
I tried to edit the wiki page about the accelerometer in order to document
this change :
http://wiki.openmoko.org/wiki/Accelerometer_data_retrieval
Please someone review it !
Thanks
___
http://derstandard.at/?url=/?id=1237229080902
well, that's more or less what i understood so far.
Die Entwicklung der Mobiltelefone wird eingestellt
Development of mobile phones stopped
big topic (many people don't read more)
Openmoko gibt freie Handy-Entwicklung auf
Openmoko stopps
Hi,
has anybody tried the new toolchain with new Ubuntu (9.04)? Is it compatible?
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
doesnt. Can anyone confirm this or tell a way to make the accelerometer
work again?
CONFIRMED ! Don't know how to make them work.
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
How do they not work? Probably you just use applications that nobody
cares to update to handle the proper way of reporting accelerometer
events that was announced about 2 months ago?
I used the python script from the wiki and it delivered only zeros.
#!/usr/bin/python
import struct
from
Hi,
I have written a tool in C++/Qt and if it connects to DBUS and enables the
GYPSY, frameworkd is using permanently 50% of CPU which seems very high to me.
Is this normal? Due to python? Or am I doing something wrong. I'm using SHR
testing but with FSO it's the same.
Code Snippets:
///
Thank you very much for the sample code. I've just read that Andy has left
Openmoko, so I wonder what will happen to the Andy-tracking Kernel. I hope
that the changes to the ABS sync events will go into the stable Kernel. When
that happens I'll add your Code to the Wiki if you agree.
All the
In the latest andy-tracking it reports the more correct 'ABS' events.
So now it does report zeros. However it doesn't report an axis if there
has been no change.
Is it correct that there are now two changes for developers. The first one is
that the EVENT type has changed from EV_REL (0x02)
Hi,
With the following Kernel the Accs work great for me.
http://downloads.openmoko.org/distro/unstable/NeoFreerunner/uImage-2.6.28-
stable+gitr0+f19f259d3c1afde8eae53983fd19f61831927413-r2-om-gta02.bin
greets
Michael
___
Openmoko community mailing
Hi,
I did the patch, restart and executed the script. Then I get the following
error. Can this be because it sends send (ATD*99#^M) but my provider
Vodafone Germany expexts *99***1# ? Where can I change this?
Greets
Michael
Feb 13 11:27:37 om-gta02 local2.info chat[2103]: send
On Sunday 08 February 2009 10:03:00 Christoph Pulster wrote:
Hi,
I want to support the Openmoko user meeting in Karlruhe/Germany with
free pouches/headsets and other accesories for each user who is there.
Nice to hear,
you are welcome to join our meeting.
Regards
Michael
QI
Make sure you have the rw in there, and the /boot/append-GTA02 is in
the partition with the rootfs. Try adding a space before the rw in case
I mangled it with recent changes.
It's a bug I think if the rootfs does not remount root rw.
the same failed to set owner root for
If you come up in NOR U-Boot it doesn't seem to impact NAND environment,
no idea why but nothing can be done about it now.
So if that's the case try whatever dance of death needed to get a
console on NAND U-Boot and do the same there.
After using the devirginator the same procedure worked.
I'm just adding some patches and doing some cleaning on it, I'll update
the moredrivers kernels at http://people.openmoko.org/andy when I
checked we didn't break the threshold stuff.
Thanks, in the moredrivers kernel the accs are working now. But now I have the
following problems.
When I use
This is reminding me of a problem we have with level interrupts on
pcf50633 new driver, we also get twice the same interrupt there although
the density of interrupts is so low and logically it cannot get confused
so it doesn't make trouble.
We also changed lis302dl to use level interrupts so
Send a bug report in Trac about it.
There is a quick workaround for this that can be done I believe.
-Andy
Thank You very much
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Very nice
thanks
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
There is a quick workaround for this that can be done I believe.
Any hint where I can find this workaround, then I'll post it to the wiki?
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
Very nice I'm from Karlsruhe, too
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
are you sure this isn't just the synchronization events?
For me the problem looks like this.
|type| |code| |-value-|
0006 - Seperator time 1
0006 0002 0048 - Value X1
0006 0002 0001 0024 - Value Y1
0006 0002 0002 0396 -
Could you test to set the threshold value to something low, e.g., 18 or
so? Also check the threshold file afterward you've set it so that it's
not zero, values which are too low to be represented by the threshold
code get rounded down.
HI,
I made a mistake. I do not really get two different
Am Freitag, 16. Januar 2009 14:28:22 schrieb Michael 'Mickey' Lauer:
Am Friday 16 January 2009 10:04:22 schrieb Michael Tansella:
Hi,
Is there any howto for using FSO for SSH networking via Bluetooth. I know
I have to use
mdbus -s org.freesmartphone.ousaged
/org/freesmartphone
Hi,
I'm using the latest FSO unstable build. If I've connected my Freerunner to my
PC for developing I always use a cheap Battery and not the original Openmoko
Battery. But because the cheap Battery is not recognised correctly FSO
believes my Battery is empty and shuts the phone down after
Remove the shutdown on low battery rule
from /etc/freesmartphone/oevents/rules.yaml and restart.
Thank you very much.
Best regards
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
Hi,
Is there any howto for using FSO for SSH networking via Bluetooth. I know I
have to use
mdbus -s org.freesmartphone.ousaged
/org/freesmartphone/Device/PowerControl/Bluetooth
org.freesmartphone.Device.PowerControl.SetPower 1
to Power it on and
mdbus -s org.freesmartphone.ousaged
Am Sonntag, 28. Dezember 2008 01:12:48 schrieb Fox Mulder:
export LANG=de_DE and spd-say -l de '%s' works for me to let navit
speak german. Don't know anymore why it didn't work at that time.
Thanks,
I was missing the package
locale-base-de-de
which is not installed by default in FSO,
now it
Hi,
does anybody know how to configure speech dispatcher.
I use it the following way:
spd-say -l de '%s'
The only problem I have is that it cannot say the german letter ß
it always pronounces it EsZett instead of s
In Navit that's a big problem because the german word for street is Straße
Any
I've got the same problem.
Does anybody have an answer?
Am Montag, 18. August 2008 13:38:15 schrieb Fox Mulder:
Hi everybody,
i want to change the default language in which navit speaks to german
but i don't find the necessary config for this. I use rev 1255 with map
move speed patch and
Am Freitag, 19. Dezember 2008 00:51:55 schrieb Michael 'Mickey' Lauer:
Beep-commands only work on terminals that support this feature.
Ok then I don't need to play around with my audio settings.
Then I will let DBUS do the work for me.
Thanks.
Michael
Am Mittwoch, 17. Dezember 2008 16:27:43 schrieb Sargun Dhillon:
Please don't send HTML e-mail to list.
I'm sorry it's default at kmail. I hope it's turned off now.
Just add a sound with an
annoying enough beep and use the proper FSO calls to play it.
I think it's too much to create a dbus
Hi,
how can I make a simple beep in C++/Qt?
neither the
Ascii commands printf(\a) or cout \a
nor the
Qt command QApplication::beep ()
seem to work.
Do I have to change the volume settings for that?
Greets
Michael
___
Openmoko community mailing list
install libqtcore4
Reinstalling libqtcore4 (4.4.3-r1.1) on root...
Downloading http://www.angstrom-
distribution.org/feeds/2008/ipk/glibc/armv4t/base/libqtcore4_4.4.3-
r1.1_armv4t.ipk
Configuring libqtcore4
(offline root mode: not running libqtcore4.postinst)
[EMAIL
Hi,
my qt4 Libs are not installed correctly in toolchain since the update of the
angström Repository, when I try to reinstall them I get the following error
[EMAIL PROTECTED]:/usr/local/openmoko/arm/bin# opkg-target -force-reinstall
install
libqtcore4
Reinstalling libqtcore4 (4.4.3-r1.1) on
On Wednesday 29 October 2008 03:13:25 Previdi Roberto wrote:
Is there a plan to access also the accelerometers through dbus?
+1
This would be very nice.
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
I've read http://wiki.openmoko.org/wiki/Opkg seems ok enough, but id like
to make them aviable to everyone, how?
Hi,
You can publish theom on
http://www.opkg.org/
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
Are you extracting the data out of the
struct with the operators
Thank you again for that hint:
For interested the way I implemented it:
Greets Michael
struct GPSSatellite{
int ID;
bool InUse;
unsigned int Elevation;
unsigned
On Wednesday 22 October 2008 22:36:51 Michael 'Mickey' Lauer wrote:
How exactly does it not work? Are you extracting the data out of the
struct with the operators as described in
http://doc.trolltech.com/4.2/qdbusargument.html ?
Thank you very much,
I didn't notice the Class qdbusargument
Ok now I got it:
I can call simple methodes (see below)
But one problem I still have. i don't know what type
Gypsy.Position.GetPosition returns.
When I call it with mdbus it returns:
#mdbus -s org.freedesktop.Gypsy /org/freedesktop/Gypsy
org.freedesktop.Gypsy.Position.GetPosition
::isConnected() always returns FALSE.
Can you tell me if I'm on the right way or what I'm doing wrong??
Thanks
Michael Tansella
void MokoNav::ConnectGPS()
{
QDBusConnection* dbus = new QDBusConnection(dbus);
QDBusConnection dbusconn =
dbus-connectToBus(QDBusConnection::SessionBus, dbus);
Service
On Friday 17 October 2008 14:27:51 Michael Tansella wrote:
QDBusConnection dbusconn =
dbus-connectToBus(QDBusConnection::SessionBus, dbus);
Service = org.freedesktop;
I found 1 error, it must be SystemBus instead of SessionBus. But unfortunately
I still cannot establish a connection.
As soon
I created an unlinked wiki page at
http://wiki.openmoko.org/wiki/Developing_with_C++_and_Qt , this is only an
initial attempt, please fix, rename, change, restructure, and correct my
bad english :)
Nicola
Thank you very much
Greets
Michael
Hello community lists !
This may be virtualbox images.. Nothing fancy, just ubuntu with
toolchain, maybe even a ready eclipse version. Publish this by
torrents, Maybe even with good to go software used during development.
I spent lots of time before i got a working environment to
On Friday 26 September 2008 00:05:12 Nicola Mfb wrote:
On Thu, Sep 25, 2008 at 7:48 PM, Michael 'Mickey' Lauer
[EMAIL PROTECTED]
wrote:
Am Donnerstag, den 25.09.2008, 18:44 +0200 schrieb Michael Tansella:
We are 2 Students and are doing a research project with the Freerunner.
Now
Hi,
We are 2 Students and are doing a research project with the Freerunner. Now we
need to develop a tool with C++ QT. Because of the nice possibilities with
dbus we want to do this with FSO. But we dont't know how to do that.
Are there QT libs for OM available yet?
Does the Metatoolchain
Thank you for your fast answers,
I found the libs here:
http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv4t/base/
Now I try to add them to the toolchain.
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
HI,
What is the best way to turn on GPS in FSO?
Is it the same like in ASU ( ..default/gpsd to ttySAC1)
Or is there another way. Is gypsy implemented yet?
I didnt't find any information about that.
Greets
Michael
___
Openmoko community mailing list
Hi,
I installed FSO milestone 2, then I removed all .conf files in /etc/opkg/ and
added a selfmade one with the following content:
src/gz bearstech-fso-testing-all http://shr.bearstech.com/fso-testing/ipk/all
src/gz bearstech-fso-testing-armv4t
http://shr.bearstech.com/fso-testing/ipk/armv4t
OK it was my fault - I used an old uboot version. Now I bought a 4 GB sd card
updated uboot and tried again - now it works perfectly.
Thx
Michael
On Friday 15 August 2008 23:25:35 Michael Tansella wrote:
That looks good. Please start NAND uboot and select Boot, then you
should be able
The installation works without any problems, but i get the following error
when I try to use the skript (http://wiki.debian.org/DebianOnFreeRunner) for
adjusting the uboot environment:
Dumping current uboot environment
dfu-util - (C) 2007 by OpenMoko Inc.
This program is Free Software and has
On Friday 15 August 2008 22:02:09 Joachim Breitner wrote:
Sorry, that should be added to the wiki (wanna do that? :-)
It’s in the fso-utils packages that is provided by the pkg-fso feed
mentioned on the wiki page (or the ./envedit.pl script in the
devirginator sources, if that’s easier to find
On Friday 15 August 2008 22:31:11 arne anka wrote:
the tools are to be used on your host computer, i think.
Thanx that was it.
But at the end I wasn't successful anyway.
Now when I reboot I see first the Openmoko splash then a white screen then a
short vibration and the Openmoko splash again
That looks good. Please start NAND uboot and select Boot, then you
should be able to read an error message that might help us here,
although you have to read fast.
OK it's a little bit too fast I'll try to record it with my webcam...
___
Openmoko
On Friday 08 August 2008 13:03:32 William Lai wrote:
Dear Community,
We are proud to announce the release of Om 2008.8 for public reviewing.
It represents our current state of development over the last 6 months.
We came a long way before achieving this milestone.
Here is what you can expect:
could you connect to your freerunner over usb?
Yes but only after a reboot of the Freerunner.
The strange thing is at the devel list Carsten Haitzler wrote:
whatever you are seeing is not ASU - not what OM is developing it is some
derivation that is different. i can tell you that simply by the
On Thursday 07 August 2008 05:45:11 Michael Shiloh wrote:
Please someone create a wiki page for Freerunner biking enthusiasts.
There seem to be quite a few of you and it would be great to consolidate
all this information in one place.
I don't bike much. My motive is to have a great example to
80 matches
Mail list logo
