2008/12/30 john dowd jdowds...@gmail.com:
The Neo registers (using linphone) with the PBX and I can see the
registration happening but then there is a REQUEST NOTIFY coming
from the PBX to linphone. Linphone responds with a 481: Subscription
does not exist. I've attached this interaction in
On Tuesday 30 December 2008, john dowd wrote:
I'm wondering if someone could verify the following SIP interaction
between linphone and the s/w PBX that I'm running.
This would be better directed to the linphone list as it's unlikely to be
openmoko-specific. It might help to say which PBX it is
True but you never know where knowledge is waiting to be revealed!
I have also posted the question on the PBX
On Tue, Dec 30, 2008 at 1:26 PM, Al Johnson
openm...@mazikeen.demon.co.uk wrote:
On Tuesday 30 December 2008, john dowd wrote:
I'm wondering if someone could verify the following SIP
Sorry, my finger slipped and I posted before I was finished typing...
I have also posted the question on the PBX site (Asterisk). Since SIP
is a standard and Linphone isn't, I didn't really want so much of a
linphone slanted answer but a SIP application answer.
Cheers!!
On Tue, Dec 30, 2008 at
I have a Neo freerunner running the 2008.9 load. I have it configured
to connect using Wifi to my access point using WPA2 encryption. I do
NOT have a SIMM card in my phone.
I have managed to make a connection to the PBX sitting on the other
side of the Access Point. However, the audio that I'm
On Friday 19 December 2008, john dowd wrote:
I have a Neo freerunner running the 2008.9 load. I have it configured
to connect using Wifi to my access point using WPA2 encryption. I do
NOT have a SIMM card in my phone.
I have managed to make a connection to the PBX sitting on the other
side
I'll have to look through the community mails then. I have seen people
referring to optimization problems. Perhaps I'm running into some
questionable s/w. For now, my requirements were to only show a mobile
phone registering with the s/w PBX. Voice was not part of the initial
requirements.
john dowd wrote:
I have a Neo freerunner running the 2008.9 load. I have it configured
to connect using Wifi to my access point using WPA2 encryption. I do
NOT have a SIMM card in my phone.
I have managed to make a connection to the PBX sitting on the other
side of the Access Point.
8 matches
Mail list logo