Looks excellent! Can't seem to get suspend to work though. Is it because
it's missing 'apm' or something? Also, would it be hard to port this to
2009.9? Is it more than a change of edje files?
-Nick
Marco Trevisan (Treviño) wrote:
In the enlightenment archives there's a new Rasterman image:
On Thu, 02 Oct 2008 17:00:53 +1000 nickd [EMAIL PROTECTED] babbled:
Looks excellent! Can't seem to get suspend to work though. Is it because
it's missing 'apm' or something? Also, would it be hard to port this to
2009.9? Is it more than a change of edje files?
its got it - thew FSO x builds
playing around with resize2fs worked, thanks.
On Wed, Oct 1, 2008 at 11:52 PM, arne anka [EMAIL PROTECTED] wrote:
A consistency check with fdisk yielded that the size of the partition and
the size of the filesystem do not match, and advised me to run e2fsck.
e2fsck said there are no
On Thu, Oct 2, 2008 at 05:57, The Rasterman Carsten Haitzler
[EMAIL PROTECTED] wrote:
[...]
you will know its not
there when its not offered as a correction in the short or long list. you
get
to delete what u typed and type again carefully. you only need to do this
once.
then it goes into
raster the list I sent you was from the British National Corpus, but
should be a good start.
Carsten Haitzler (The Rasterman) wrote:
On Wed, 1 Oct 2008 21:05:53 -0600 Ori Pessach [EMAIL PROTECTED] babbled:
I understand what it's doing. It's not doing it well. I tried it for shell
i
Sarton O'Brien a écrit :
The 'leave it overnight' scenario is the best one I encounter for a dead
battery ;) ... I think you'll be right.
Sarton
A good one is :
- Hold down the aux key.
- Put battery in.
- Put usb in.
- Hold down the power key.
- Release aux key.
- Wait for menu.
Hi,
I'm trying to compile MPlayer with Glamo support following this site:
http://unadventure.wordpress.com/2008/06/08/accelerating-in-my-pocket/
But error occurs when compile it as follows:
libaf/af.o:(.rodata+0x3c): undefined reference to `af_info_lavcac3enc'
On 01/10/2008, at 2:07 AM, Matthias Apitz wrote:
Any hint about the name of a larger font that could be used with
'xterm -fn ...'? I'm as well missing 'xlsfonts' in FR :-(
xterm -fn -*-fixed-medium-*-*-*-20-*-*-*-*-*-*-*
?
Here's the xlsfonts binary from Debian. It's probably binary
i'll try! then if it works i'll add to the wiki.
answers below:
On Wed, Oct 1, 2008 at 11:37 PM, Atilla Filiz [EMAIL PROTECTED]wrote:
My eperience with the headset: If you plug it all the way in, you hear from
one side. You pull it out a bit, you hear from teh other side. There is a
sweet
On 1 Oct 2008, at 12:28, Nishit Dave wrote:
All this discussion does not help if you realize that even after
placing the FR *next* to the blooming router, you get reported a
signal strength of 65%. What does the hardware expect, building the
router *inside* the FR?
Nishit,
The
Hi,
in these days i'm going to install debian.
Do you have any hints before starting to have a nice installation?
thanks!
d
ps: i read about the fso kernel suspending problem, so is it better for me
to use om kernel?
thanks
___
Openmoko community
El día Thursday, October 02, 2008 a las 06:45:59PM +1000, Alex Osborne escribió:
On 01/10/2008, at 2:07 AM, Matthias Apitz wrote:
Any hint about the name of a larger font that could be used with
'xterm -fn ...'? I'm as well missing 'xlsfonts' in FR :-(
xterm -fn
Quoting Joel Newkirk [EMAIL PROTECTED]:
On Wed, 1 Oct 2008 20:32:34 -0600, Ori Pessach [EMAIL PROTECTED]
wrote:
I have a question about the predictive keyboard shown in one of those
movies
snip
--Ori Pessach
Intended, you just have to understand what it's doing.
Unlike T9 and
On Thu, 2 Oct 2008 05:12:44 -0400 Ian Stephen [EMAIL PROTECTED] babbled:
Quoting Joel Newkirk [EMAIL PROTECTED]:
On Wed, 1 Oct 2008 20:32:34 -0600, Ori Pessach [EMAIL PROTECTED]
wrote:
I have a question about the predictive keyboard shown in one of those
movies
snip
Dear all:
Here is the google analytic records of September:
http://wiki.openmoko.org/wiki/Wiki_statistic_numbers#September, 2008
Feel free to let me know , if I missed anything you want to know.
Brenda
___
Openmoko community mailing list
David Samblas wrote:
Hi there on of our colleges[1] of the spanish list has provided us with
an gsmhanset state file that solves low volume on call reciver , I
have barelly tested it alone with a phone en each ear :). I will test it
further along the day and post the results, any one else
On Thu, 02 Oct 2008 00:59:20 -0700 Steve Mosher [EMAIL PROTECTED] babbled:
aha! a decent frequency corpus (a few thousand words). i'll merge this with
the default us dict (and remove the small one as now that's useless).
Hey raster, How's it going.
I promised you some frequency data a while
It's out!
http://qtextended.org/modules/mydownloads/
On Thu, Oct 2, 2008 at 02:51, Marco Trevisan (Treviño) [EMAIL
PROTECTED]wrote:
Lorn Potter wrote:
Marco Trevisan (Treviño) wrote:
Cool... Btw I've seen that there are also some commercial (premium)
modules that could be integrated
Stability and battery life are my primary concernn. If it is stable enough
to be a primary phone and survive for 60+ hours, i'm definitely going for
it.
On Thu, Oct 2, 2008 at 12:11 PM, Tobias Kündig [EMAIL PROTECTED]wrote:
It's out!
http://qtextended.org/modules/mydownloads/
On Thu, Oct
TL Mieszkowski [EMAIL PROTECTED] writes:
asterisk will make an excellent voip backend for the neo
Asterisk is dead. Long live freeswitch.
Didn't you get the memo?;)
--
Esben Stien is [EMAIL PROTECTED] s a
http://www. s tn m
irc://irc. b -
what the link to a kernel image for it?
2008/10/2 Atilla Filiz [EMAIL PROTECTED]
Stability and battery life are my primary concernn. If it is stable enough
to be a primary phone and survive for 60+ hours, i'm definitely going for
it.
On Thu, Oct 2, 2008 at 12:11 PM, Tobias Kündig [EMAIL
El jue, 02-10-2008 a las 03:18 +0200, Marco Trevisan (Treviño)
escribió:
In the enlightenment archives there's a new Rasterman image:
- openmoko-illume-image-glibc-ipk--20080929-om-gta02.rootfs.jffs2 [1]
It looks so cool with the new illume theme [2] [3] [4] [5] [6], but
practically it has no
Al Johnson wrote:
On Friday 19 September 2008, Michael Shiloh wrote:
Denis Galvão wrote:
On 18/09/2008, at 01:56, Adam Bogacki wrote:
I like the concept and would like to volunteer to test a prototype in
New Zealand conditions.
For sure Adam.
Like Michael said, we should start something in
Davide Scaini wrote:
Do you have any hints before starting to have a nice installation?
Sorry for the delay, but better late than never!
go here - https://wiki.openmoko.org/wiki/Flashing_the_Neo_Freerunner
And update u-boot by going to the section marked Flashing the boot loader
to the
On Thu, Oct 2, 2008 at 13:03, Russell Hay [EMAIL PROTECTED] wrote:
what the link to a kernel image for it?
On Thu, Oct 2, 2008 at 12:11 PM, Tobias Kündig [EMAIL PROTECTED]wrote:
It's out!
http://qtextended.org/modules/mydownloads/
And how can we keep our data ? Can we keep current
Ekiga? did you tryed that on [EMAIL PROTECTED]
so curious!
d
On Thu, Oct 2, 2008 at 2:56 PM, Esben Stien [EMAIL PROTECTED] wrote:
TL Mieszkowski [EMAIL PROTECTED] writes:
asterisk will make an excellent voip backend for the neo
Asterisk is dead. Long live freeswitch.
Didn't you get the
Any way to doing this inverted? from a already build 2008.9 stack add
this beautifull front end?
i'm interested in this last option... ;-)
Rasterman illume us!
d
On Thu, Oct 2, 2008 at 1:11 PM, David Samblas [EMAIL PROTECTED]
wrote:
El jue, 02-10-2008 a las 03:18 +0200, Marco Trevisan
ok i tought it was even bigger! I was thinking to buy a 8gb sd card, but
maybe 4gb are enough! Thanks
and what about the boot speed-up script: is that useful?
thanks for your hints!
d
On Thu, Oct 2, 2008 at 1:04 PM, Neil Jerram [EMAIL PROTECTED]wrote:
2008/10/2 Davide Scaini [EMAIL PROTECTED]:
Just use the one from 4.3.3-snapshot:
http://qtextended.org/modules/mydownloads/visit.php?lid=82
Russell Hay wrote:
what the link to a kernel image for it?
2008/10/2 Atilla Filiz [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
Stability and battery life are my primary concernn. If it is
calm down,
its a fact, that freerunners wlan is far away from optimum.
try a wget shortly after doing ifup eth0 - everything works
try wget some minutes later (no suspend/resume in between) from same server
- no download, even if ping still works
ifdown eth0, ifup eth0 - wget works again
same
I'm trying to build qt-extended myself, but build process fails, anyone may
help?
This is what i did:
cd /opt
wget http://qtextended.org/downloads/neo/arm920t-eabi-ficgta01-toolchain.tgz
tar xzvfC arm920t-eabi-ficgta01-toolchain.tgz /
wget
On 2008.10.01.13.05, Vince M. Clark wrote:
| I've tried multiple times with no success.
How about removing all SD and SIM cards, does that help?
--Brock
___
Openmoko community mailing list
community@lists.openmoko.org
OpenSSL support . no
Is the SSL support activated in the released image on qtextended.org ?
I guess it is still needed for ie. encrypted IMAP ?
___
Openmoko community mailing list
community@lists.openmoko.org
Joel Newkirk wrote:
On Wed, 01 Oct 2008 14:39:08 +0100, Arigead [EMAIL PROTECTED]
wrote:
Sorry Yes I would like to use the Icon on the top of the illume bar. I
was thinking interfacing this to my daemon so regardless of app you can
see the wifi status the same as you can see the GSM
Carsten Haitzler (The Rasterman) wrote:
On Wed, 1 Oct 2008 11:20:23 -0400 Joel Newkirk [EMAIL PROTECTED] babbled:
On Wed, 01 Oct 2008 14:39:08 +0100, Arigead [EMAIL PROTECTED]
wrote:
i'm baffled. that bar wt the top is always visible - it's not part of your app
(and it only is
Actually - I used the one from the flash image; *Version:* 4.3.2 [image:
Submitted Date] 2008/8/29
2008/10/2 Tobias Kündig [EMAIL PROTECTED]
Just use the one from 4.3.3-snapshot:
http://qtextended.org/modules/mydownloads/visit.php?lid=82
Russell Hay wrote:
what the link to a kernel
OK now you guys are just messing with me ;-)
Nothing is working. I've taken everything out, tried all different combinations
based on suggestions from the community.
I'm sure at this point I have a totally dead battery and old u-boot. I'll get
it jump started and update u-boot.
-
Hi, I need to rotate the screen from the shell with a command. Anybody knows
how to do that?
Thanks in advance
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
El día Thursday, October 02, 2008 a las 06:19:30AM -0700, vale escribió:
calm down,
its a fact, that freerunners wlan is far away from optimum.
try a wget shortly after doing ifup eth0 - everything works
try wget some minutes later (no suspend/resume in between) from same server
- no
2008/9/27 rhn [EMAIL PROTECTED]
Hi
I've just tried to flash my freerunner with the newest FDOM and ran into a
problem with dfu-util.
Long story short, here's the console output:
I'm having this problem just now with qtopia, the first time i tried as
normal user i got error 71, the second i
add a sleep 500 to your loop ;)
which image / kernel are you using?
thx
vale
Matthias Apitz wrote:
El día Thursday, October 02, 2008 a las 06:19:30AM -0700, vale escribió:
calm down,
its a fact, that freerunners wlan is far away from optimum.
try a wget shortly after doing
http://git.openmoko.org/?p=kernel.git;a=shortlog;h=stableMeng Sun ha
scritto:
Hi,
I'm trying to compile MPlayer with Glamo support following this site:
http://unadventure.wordpress.com/2008/06/08/accelerating-in-my-pocket/
But error occurs when compile it as follows:
[CUT]
I
El día Thursday, October 02, 2008 a las 07:35:23AM -0700, vale escribió:
add a sleep 500 to your loop ;)
will do later at home and post the results;
which image / kernel are you using?
Om2008.9-gta02-20080916.rootfs.jffs2
Om2008.9-gta02-20080916.uImage.bin
matthias
--
Cédric Berger wrote:
And how can we keep our data ? Can we keep current /home, or just qtopia
database, or do we have to migrate it manually ?
Well this is quite important for me too. Is there a migration needed or
simply the data is saved in the same format?
Since until today I always shared
On Thu, 2 Oct 2008 16:01:32 +0200, Thomas Bertani [EMAIL PROTECTED]
wrote:
Hi, I need to rotate the screen from the shell with a command. Anybody
knows
how to do that?
Thanks in advance
Google 'x11 rotate' or 'linux screen rotate' and you'll quickly find the
command 'xrandr'. Resolution
Hi guys.
After some time trying to install Debian on my SDCard, Im able to boot
it up.
When zhone show up, I only see the four icons and the date bar, but
the top bar with signal, battery things does not appeared.
Is there a way to correct that?
Thanks,
--
Denis
Brazil
Carsten Haitzler (The Rasterman) wrote:
On Wed, 1 Oct 2008 21:05:53 -0600 Ori Pessach [EMAIL PROTECTED] babbled:
I understand what it's doing. It's not doing it well. I tried it for shell
i disagree. it works like a charm for me - as per my previous mail - i can use
it while walking down
On 02.10.2008 at 17:01:37, Joel Newkirk wrote:
Google 'x11 rotate' or 'linux screen rotate' and you'll quickly find the
command 'xrandr'. Resolution and Rotation controls.
xrandr -o 0 - 'normal'
xrandr -o 1 - 'right'
xrandr -o 2 - 'inverted'
xrandr -o 3 - 'left'
-o for 'orientation',
You don't need google to read the object: [qtopia].
Qtopia uses framebuffer and not x11...
2008/10/2 Joel Newkirk [EMAIL PROTECTED]
On Thu, 2 Oct 2008 16:01:32 +0200, Thomas Bertani [EMAIL PROTECTED]
wrote:
Hi, I need to rotate the screen from the shell with a command. Anybody
knows
how
On Thu, 02 Oct 2008 17:10:27 +0200 Marco Trevisan (Treviño) [EMAIL
PROTECTED]
babbled:
Carsten Haitzler (The Rasterman) wrote:
On Wed, 1 Oct 2008 21:05:53 -0600 Ori Pessach [EMAIL PROTECTED]
babbled:
I understand what it's doing. It's not doing it well. I tried it for shell
i
FSO3 in debian doesn't have the top bar anymore in zhone. You can use
the openmoko-panel-plugin floating around in this mailing list. This
xfce plugin shows the status of gsm, battery and some other usefull
stuff. :)
Ciao,
Rainer
Denis Galvão wrote:
Hi guys.
After some time trying to
vale wrote:
add a sleep 500 to your loop ;)
which image / kernel are you using?
You should perhaps ask what AP he's using, or whether he has the power
management enabled on the wifi. Some APs apparently get upset by power
managed devices, and the Freerunner enables power management of the
My Freerunner is here!
:-)
Must go play!
--
No army can withstand the strength of an idea
whose time has come.
-Victor Hugo
http://www.nlpagan.net
Running on Mandriva Linux 2008 and Ubuntu 8.04
___
Openmoko community mailing list
On Thu, 2 Oct 2008 19:11:00 +0200, Fabian Henze [EMAIL PROTECTED] wrote:
On 02.10.2008 at 17:01:37, Joel Newkirk wrote:
Google 'x11 rotate' or 'linux screen rotate' and you'll quickly find the
command 'xrandr'. Resolution and Rotation controls.
xrandr -o 0 - 'normal'
xrandr -o 1 - 'right'
I downloaded the rootfs image for qt extended and flashed it to the rootfs
partition. I previously had FDOM installed so basically this must have
overwritten it. The kernel image was not available so i guess im still using
the image i flashed from FDOM.
It works but is somewhat flaky. No USB
On Thu, Oct 02, 2008 at 05:46:22PM +0200, Paul wrote:
My Freerunner is here!
:-)
Must go play!
And don't forget to fix bugs as much as possible ;)
Alex
___
Openmoko community mailing list
community@lists.openmoko.org
2008/10/2 Kishore [EMAIL PROTECTED]
I downloaded the rootfs image for qt extended and flashed it to the rootfs
partition. I previously had FDOM installed so basically this must have
overwritten it. The kernel image was not available so i guess im still
using
the image i flashed from FDOM.
Sebastian Ohl
[EMAIL PROTECTED] writes:
Im having difficulty getting this working. Version 0.3 worked briefly.
Any chance of a new deb?
Hi gents,
some words of what this is(as it produced some confusion last time:
The openmoko-panel-plugin is a gtk based plugin that draws the
powerstate of
Lists of US names. first and last
http://www.census.gov/genealogy/names/names_files.html
Cédric Berger wrote:
On Thu, Oct 2, 2008 at 05:57, The Rasterman Carsten Haitzler
[EMAIL PROTECTED] wrote:
[...]
you will know its not
there when its not offered as a correction in the short or long
On Thursday 02 Oct 2008 9:40:59 pm Nicola Mfb wrote:
2008/10/2 Kishore [EMAIL PROTECTED]
I downloaded the rootfs image for qt extended and flashed it to the rootfs
partition. I previously had FDOM installed so basically this must have
overwritten it. The kernel image was not available so i
Joachim Breitner [EMAIL PROTECTED]
writes:
Could be. What version of fso-frameworkd do you have installed (dpkg -l
fso-frameworkd)?
ii fso-frameworkd 0.2.0-git20080 freemsmartphone.org Framework Daemon
Greetings,
Joachim
--
Joakim Verona
___
I previously posted a note that the actual 0.4 package misses quite some
icons. So to get it to work you just have to put the missing icons back
to /usr/share/pixmaps/openmoko-panel-plugins.
You can get the icons from
http://www.ohli.de/download/openmoko-panel-plugin_0.4.orig.tar.gz
It misses the
I can't see covers from the media player. the is a format or something
standard to follow to view them? because I have always no-cover image...
on qtopia 4.4
Thanks in advance and sorry for my bad english :P
___
Openmoko community mailing list
Cédric Berger wrote:
What I really miss is having what I really typed be immediatly available
as an option (ie not having to pop up a list).
Personnaly I would even prefer by far (but might be an option) that what
I type is what is selected by default, and a computed word is shown in
the box
I used to have a bunch of them when I was doing a NLG ( natural Language
generation) pet project. I sent you a link to US names as well. from the
US census.
For personal dictionaries, people could just run a simple word frequency
analysis on their archived email,( there are GPL programs that
On Thu, Oct 2, 2008 at 9:19 AM, vale [EMAIL PROTECTED] wrote:
its a fact, that freerunners wlan is far away from optimum.
[...]
- wlan drivers not working well
i think this should also be a high priority aspect to work on for Openmoko.
I definitely agree.
I was recently at a
And don't forget to fix bugs as much as possible ;)
LOL!! First bug is already there: I powered down the phone (Power Down
GSM Antenna).
Now... Power-up GSM Antenna does not bring my phone back up...
How do I do that? (FR is still charging)
Do I need to power down and boot up again?
On Thu, Oct 2, 2008 at 9:54 PM, Kishore [EMAIL PROTECTED] wrote:
On Thursday 02 Oct 2008 9:40:59 pm Nicola Mfb wrote:
2008/10/2 Kishore [EMAIL PROTECTED]
I downloaded the rootfs image for qt extended and flashed it to the rootfs
partition. I previously had FDOM installed so basically this
As much as I love my FR, I must admit that the whole experience had
me thinking lustful thoughts about my wife's iPhone...
I would say just get an iPhone. I did. Its much more fun to develop
for a *platform* rather than a constant dogs-breakfast of disaster.
Until someone in the
I tried four times to install debian on a 2GB SD. I installed once a working
fine debian but I've broken the SD card. Now I get always this error:
P: Configuring helper cdebootstrap-helper-apt
E: Internal error: install
Exists something i could do?
On Thu, 02 Oct 2008 09:37:58 -0700, Steve Mosher [EMAIL PROTECTED]
wrote:
I used to have a bunch of them when I was doing a NLG ( natural Language
generation) pet project. I sent you a link to US names as well. from the
US census.
For personal dictionaries, people could just run a simple word
El día Thursday, October 02, 2008 a las 04:39:01PM +0100, Alastair Johnson
escribió:
vale wrote:
add a sleep 500 to your loop ;)
I run this script for an hour or so:
[EMAIL PROTECTED]:~# cat wifi.sh
#!/bin/sh
cd /tmp
while true; do
rm 1M
wget http://www.unixarea.de/1M
date ;
On Thu, 2 Oct 2008 21:54:15 +0530
Kishore [EMAIL PROTECTED]
(K) wrote:
On Thursday 02 Oct 2008 9:40:59 pm Nicola Mfb wrote:
2008/10/2 Kishore
[EMAIL PROTECTED] I
downloaded the rootfs image for qt extended and flashed it to the
rootfs partition. I previously had FDOM installed so basically
Hello,
How can I use cetain services the GSM offers, like
- hiding caller ID ever/never/next-call
- re-direct incoming calls to mobile voicebox on busy/no-answer/any
Sorry, if this is a FAQ, but I don't see it on the Wiki;
thx
matthias
--
Matthias Apitz
Manager Technical Support -
I ran down to Batteries Plus and picked up a Rayovac replacement that fits. It
doesn't come charged but has enough charge to at least jump start my fr. I put
in the new battery, plugged in the usb cable, and was able to boot.
Then I took out the Rayovac battery and put the original battery
Is this u-boot safe for any gta02? What is the v5_and_up for?
http://downloads.openmoko.org/daily/gta02v5_and_up-u-boot.bin
Vince Clark
[EMAIL PROTECTED]
(303) 493-6723
___
Openmoko community mailing list
community@lists.openmoko.org
I tried it.
Very nice raster! Good work. Alarm is fantastic :)
Now we need only a dialer, contacts and messages compatible with FSO :)
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On Thu, 2 Oct 2008 19:43:23 +0200
Petr Vanek [EMAIL PROTECTED] wrote:
No problem here. I reflashed previous QT snapshot 4.3 so i presume if
you use kernel from 4.3 you are ready to go.
unless...I was also looking at the services screen or what it's
called in QT4.4 so i might have
I'm using the latest FDOM, I believe it's based on 2008.09. My question is
what is the fundamental difference between pressing the power button to
cause the phone to suspend, pressing the aux button to make the phone lock
the screen and not pressing any buttons and letting the software timeout.
On Thu, Oct 2, 2008 at 12:04 PM, Vince M. Clark [EMAIL PROTECTED]wrote:
I ran down to Batteries Plus and picked up a Rayovac replacement that fits.
It doesn't come charged but has enough charge to at least jump start my fr.
I put in the new battery, plugged in the usb cable, and was able to
Frederic Leroy [EMAIL PROTECTED] writes:
Le Thu, 25 Sep 2008 13:05:53 +0200,
[EMAIL PROTECTED] a écrit :
Michele Renda [EMAIL PROTECTED]
writes:
I am currently using epdf and it work well too
The nice thing IMHO with Evince is that it supports many formats:
- djvu
- pdf
- cbz
No it is definitely the power button (the round one below the usb plug) staying
lit red. I'm running the FSO image.
- Original Message -
From: Angus Ainslie [EMAIL PROTECTED]
To: List for Openmoko community discussion community@lists.openmoko.org
Sent: Thursday, October 2, 2008
On Thursday 02 Oct 2008 11:53:46 pm Franky Van Liedekerke wrote:
On Thu, 2 Oct 2008 19:43:23 +0200
Petr Vanek [EMAIL PROTECTED] wrote:
No problem here. I reflashed previous QT snapshot 4.3 so i presume if
you use kernel from 4.3 you are ready to go.
unless...I was also looking at the
On Thu, Oct 2, 2008 at 8:44 AM, Davide Scaini
[EMAIL PROTECTED] wrote:
Ekiga? did you tryed that on [EMAIL PROTECTED]
so curious!
I haven't, but I see no reason why it wouldn't work. It doesn't do IAX
though, only SIP. And sip is problematic behind a NAT firewall.
On Thu, Oct 2, 2008 at 2:56
Hi Rainer, thanks to point me a direction.
Running OM2008.8 I cant start an xterm session, how could I do it?
I just installed xfce4, it is runnig well, but slowly...
How could I start OM2008.8 with zhone and the openmoko-panel-plugin at
start up?
Thanks,
--
Denis
Brazil
On 02/10/2008, at
thats cool ... wish it would work here too,
but my experience is different. doesn't matter if i try @university @home
@public places or @highly secured wlans with project partners.
wlan gets stuck after a few minutes of inactivity. i don't know why.
how can i stop this power thing over wlan?
Yes.
v5 is the design revision of the first retail Freerunners, earlier versions
of GTA02 were never manufactured in significant quantities.
j
On Thu, 2 Oct 2008 12:12:48 -0600 (MDT), Vince M. Clark
[EMAIL PROTECTED] wrote:
Is this u-boot safe for any gta02? What is the v5_and_up for?
Carsten Haitzler (The Rasterman) wrote:
it does have concept of frequency orf words. i just dont have any DATA for
that. the dict format handles is:
word1
word2
word3
OR
word1 20
word2 434
word3 1
I was thinking to a way to automatize this a while ago, but I wrote
something just now...
Exists something i could do?
you probably need to fiddle with the sd clock. search the archives and the
wiki, there should be a few postings/entries how to do that either in
u-boot-menu or in sysfs.
___
Openmoko community mailing list
Running OM2008.8 I cant start an xterm session, how could I do it?
2008.8 != debian/fso
I just installed xfce4, it is runnig well, but slowly...
How could I start OM2008.8 with zhone and the openmoko-panel-plugin at
start up?
not at all afaik.
2008.8 is one distribution for freerunner,
vale,
i think this should also be a high priority aspect to work on for
Openmoko.
It is, and for Atheros too.
We are working on improving the driver (there are several driver
variants actually), we are working on getting all of this into
mainline kernel.org, we are working with Atheros
a few questions:
- to move an installation from sd card to flash: is it sensible/sufficient
to delete everything from flash and copy from sd card?
creating a jffs image and flash it to the fr seems rather long-winded.
- to those havin debian in flash: what do you have in flash what on sd? my
Jason Cawood wrote:
I'm using the latest FDOM, I believe it's based on 2008.09. My question is
what is the fundamental difference between pressing the power button to
cause the phone to suspend, pressing the aux button to make the phone lock
the screen and not pressing any buttons and letting
Thanks Arne.
I got the point. (At least I think i got it)
But why you refer to Debian/FSO? Is the arm repo mainteined by the FSO
team?
OM does not use FSO?
Im kind lost on all terminology...
Thanks,
--
Denis
On 02/10/2008, at 16:04, arne anka wrote:
Running OM2008.8 I cant start an
BTW What I wanna mean is if it is possible to have the openmoko-panel-
plugin running on the zhone-session, the default one for Debian on
freerunner.
Thanks,
--
Denis
On 02/10/2008, at 16:04, arne anka wrote:
Running OM2008.8 I cant start an xterm session, how could I do it?
2008.8 !=
Hi,
Am Donnerstag, den 02.10.2008, 17:30 + schrieb Matthias Camenzind:
I tried four times to install debian on a 2GB SD. I installed once a working
fine debian but I've broken the SD card. Now I get always this error:
P: Configuring helper cdebootstrap-helper-apt
E: Internal error:
But why you refer to Debian/FSO? Is the arm repo mainteined by the FSO
team?
no.
but fso has it's own life independent of debian -- otoh debian on fr makes
only sense when using fso.
OM does not use FSO?
not yet.
it is supposed to be the next step (internally) -- but afaik the 200X.Y
BTW What I wanna mean is if it is possible to have the openmoko-panel-
plugin running on the zhone-session, the default one for Debian on
freerunner.
if you have _only_ zhone running (ie no xfce or what desktop/window
manager ever), the answer is no.
if you use xfce and start zhone as
On Fri, 3 Oct 2008 00:08:55 +0530
Kishore [EMAIL PROTECTED] wrote:
On Thursday 02 Oct 2008 11:53:46 pm Franky Van Liedekerke wrote:
On Thu, 2 Oct 2008 19:43:23 +0200
Petr Vanek [EMAIL PROTECTED] wrote:
No problem here. I reflashed previous QT snapshot 4.3 so i
presume if you use
On 02/10/2008, at 16:53, arne anka wrote:
no.
but fso has it's own life independent of debian -- otoh debian on fr
makes
only sense when using fso.
So, the FSO are a bunch o deb packages for Debian to communicate with
the Dbus. Right?
well, it _is_ a bit confusing, but the wiki has at
1 - 100 of 128 matches
Mail list logo