Thanks! though downloads.freesmartphone.org redirects to www.f...org and
a beautiful 404 appears :-(
I'll keep trying these days, sigh.
Pablo
El dom, 23-11-2008 a las 00:43 +0100, Richy escribió:
echo 134.169.172.109 {,trac.,git.}freesmartphone.org /etc/hosts
I must admit I had just started the upgrade command and went off to do
different things...
What I recall seeing at the end was the mention of a problem making a
backup link to uImage.bin after which the upgrade exited with code 1.
The SSH session was still fine, the GUI on the FR itself had
Hello,
Today I've done some tests charging my FR from the Minty Boost:
- the two AA batteries are: 2700mAh NiMH 1.2V from Varta, they have been
fully charged and directly pulled out of the Varta charger;
- I've been waiting until battery.py showed the FR with 10% of left
capacity;
-
Hi,
Am Sonntag, den 23.11.2008, 11:38 +0100 schrieb Paul:
I must admit I had just started the upgrade command and went off to do
different things...
What I recall seeing at the end was the mention of a problem making a
backup link to uImage.bin after which the upgrade exited with code 1.
Less capable in which way? We just saw that you CAN use a stylus with
a capacitive screen
afaik, you can not. a capacitive screen requires fingers and does not work
with styli.
___
Openmoko community mailing list
community@lists.openmoko.org
Pablo Ruiz Múzquiz wrote:
Thanks! though downloads.freesmartphone.org redirects to www.f...org and
a beautiful 404 appears :-(
downloads.freesmartphone.org is on a different server (140.211.169.169).
-- Rod
___
Openmoko community mailing list
Michele Renda wrote:
It happent to me too, some months ago.
It is possible to solve the problem in different ways,
you can try to boot with a non debian image, download the install.sh
script, and do only
the stages: mount, kernel (in this way it reinstall only the kernel)
I don't know if
Hello, everybody!
I think i found a universal (not only GTK) and easy (without special
tslib drivers) solution that should work on any X-server.
I just added to my fbpanel two icons to launch xmodmap -e 'pointer = 1
2 3' and xmodmap -e 'pointer = 2 3 1' to switch ts to left-click and
to
Am So 23. November 2008 schrieb Matthias Apitz:
Hello,
Today I've done some tests charging my FR from the Minty Boost:
- the two AA batteries are: 2700mAh NiMH 1.2V from Varta, they have been
fully charged and directly pulled out of the Varta charger;
- I've been waiting until
2008/11/23 Paul Fertser [EMAIL PROTECTED]:
Hello, everybody!
I think i found a universal (not only GTK) and easy (without special
tslib drivers) solution that should work on any X-server.
I just added to my fbpanel two icons to launch xmodmap -e 'pointer = 1
2 3' and xmodmap -e 'pointer = 2
2008/11/23 Paul [EMAIL PROTECTED]:
I must admit I had just started the upgrade command and went off to do
different things...
I've seen this too. But in my case I was OK again after a reboot.
Neil
___
Openmoko community mailing list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
It happent to me too, some months ago.
It is possible to solve the problem in different ways,
you can try to boot with a non debian image, download the install.sh script,
and do only
the stages: mount, kernel (in this way it reinstall only the
Paul Fertser [EMAIL PROTECTED] writes:
I just added to my fbpanel two icons to launch xmodmap -e 'pointer = 1
2 3' and xmodmap -e 'pointer = 2 3 1' to switch ts to left-click and
to middle-click respectively. Right-click can be added as well.
Does this work for you with xserver-xglamo? It
Josh Thompson wrote:
Has anyone tried to find an armband for holding your Freerunner while
exercising?
The UMC-3 case logic armband matches quite well the Freerunner.
The case is very elastic and so the headset can be plugged too.
The lycra cover can be pulled back for permanently viewing
Sorry for my previous mail, the subeject was not correct.
Gilles Casse wrote:
Josh Thompson wrote:
Has anyone tried to find an armband for holding your Freerunner while
exercising?
The UMC-3 case logic armband matches quite well the Freerunner.
The case is very elastic and so the
jewgeni,
seems you experience the well known sd card issue.
wiki and/or archives should offer a lot of postings on the issue.
it boils down to setting sd_max_clk -- in your case in the nand boot
environment since your fr seems unable to boot from sd at all.
searching for sd_max_clk +openmoko
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Timo Juhani Lindfors ha scritto:
Does this work for you with xserver-xglamo? It doesn't here.
In xserver-xglamo i saw no way to make a right click!
Michele Renda
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG
2008/11/22 Anton Persson [EMAIL PROTECTED]:
He, actually you're right.. I withdraw that remark.. It's OK hardware,
but with an excellent aesthetic design, and an innovative UI. A UI that
would
not have been possible if the multi-touch hardware was not in place.
/Anton
On Sat, Nov 22,
Would someone know a nice way to get the FR running again?
am i right in assuming that you
a) are running debian from sd card and
b) have /boot as separate fat partition
?
if so, unmount /boot, run
apt-get -f install
this should fix any half installed packages
afterwards copy the files in /boot
Thanks, everyone, for the tips.
I'll look into changing the FAT partition to EXT2, as that seems to be
the big problem-maker.
Paul
--
Be a friend to thyself, and others will be so too.
-Thomas Fuller
http://www.nlpagan.net
Running on Mandriva Linux 2008 and Ubuntu 8.10
afaik you CAN indeed... follow this link:
http://www.tenonedesign.com/stylus.php
On Sun, Nov 23, 2008 at 1:52 PM, arne anka [EMAIL PROTECTED] wrote:
Less capable in which way? We just saw that you CAN use a stylus with
a capacitive screen
afaik, you can not. a capacitive screen requires
afaik you CAN indeed... follow this link:
http://www.tenonedesign.com/stylus.php
well, that's not what stylus means and nothing sensible (why using a
thing that effectively mimics a finger into the big fat top), but ok.
___
Openmoko community
On Sunday 23 November 2008 16:59:18 Anton Persson wrote:
afaik you CAN indeed... follow this link:
http://www.tenonedesign.com/stylus.php
On Sun, Nov 23, 2008 at 1:52 PM, arne anka [EMAIL PROTECTED] wrote:
Less capable in which way? We just saw that you CAN use a stylus with
a capacitive
Hi,
with this command i can send a sms but how can i activate the submit report of
the sms? I do not really understand how to give this
dictionary a{sv}:properties to the SendMessage. What is the key and
what is the value?
#mdbus -s org.freesmartphone.odeviced /org/freesmartphone/GSM/Device \
very nice...but what about the raster's keyboard? i cannot see it at all...
any hint? am i doing something wrong?
d
On Sun, Nov 23, 2008 at 1:03 AM, Jesus McCloud [EMAIL PROTECTED]wrote:
rocks!
compared to my xfce dekstop i now DO see what raster meant (desktops on
diet)
--
View this
Joel Newkirk wrote:
[...]
The short solution - 'opkg update' and 'opkg install dropbear' from
terminal, then 'opkg upgrade' via ssh. opkg is imperfect...
Actually I believe it's dropbear's fault.
Kind regards,
--
Lech Karol Pawłaszek ike
You will never see me fall from grace [KoRn]
On Fri, Nov 21, 2008 at 12:43 PM, drac2000 [EMAIL PROTECTED] wrote:
http://wiki.openmoko.org/wiki/Jokes http://wiki.openmoko.org/wiki/Jokes:-p
--
View this message in context:
http://n2.nabble.com/I-realy-like-them-tp1563210p1563210.html
Sent from the Openmoko Community mailing list archive
Hi,
(i posted the reply off-list by occasion, sorry)
Neil Jerram [EMAIL PROTECTED] writes:
I just added to my fbpanel two icons to launch xmodmap -e 'pointer = 1
2 3' and xmodmap -e 'pointer = 2 3 1' to switch ts to left-click and
to middle-click respectively. Right-click can be added as
top right (next to the hidden gadgets)... in illume ofcourse
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi,
Timo Juhani Lindfors [EMAIL PROTECTED] writes:
I just added to my fbpanel two icons to launch xmodmap -e 'pointer = 1
2 3' and xmodmap -e 'pointer = 2 3 1' to switch ts to left-click and
to middle-click respectively. Right-click can be added as well.
Does this work for you with
Works for me too (before I had no problems with sim card). However, I
noticed its take now little longer to register to the network.
--
hiciu
___
Openmoko community mailing list
community@lists.openmoko.org
Al Johnson wrote:
make a uBoot menu entry
to boot from partition 3 as described in the wiki. You could add extra
partitions for other distros too.
http://wiki.openmoko.org/wiki/Booting_from_SD
That works for me now
Thank you
Just want to share something, the partition number
seems you experience the well known sd card issue.
wiki and/or archives should offer a lot of postings on the issue.
it boils down to setting sd_max_clk -- in your case in the nand boot
environment since your fr seems
unable to boot from sd at all.
searching for sd_max_clk +openmoko should
like writing past memory available, I guess it's because broken
environment.
hardly. i'd rather think you try to flash the wrong partition.
what exactly did you do and what exactly did dfu-util or the fr report?
___
Openmoko community mailing list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| seems you experience the well known sd card issue.
| wiki and/or archives should offer a lot of postings on the issue.
| it boils down to setting sd_max_clk -- in your case in the nand boot
environment
i tried to install shr apps under debian (on fr)
well ipk install doens't work because the filetype differs, and (and
thats what made me give up) obviously the architecture in the control
file, so the only possibility to install apps was altering the
archives an scp the contents (of course of the
On Sun, 23 Nov 2008 17:55:06 +0100, Lech Karol Pawłaszek [EMAIL PROTECTED]
wrote:
Joel Newkirk wrote:
[...]
The short solution - 'opkg update' and 'opkg install dropbear' from
terminal, then 'opkg upgrade' via ssh. opkg is imperfect...
Actually I believe it's dropbear's fault.
Kind
2008/11/23 Andy Green [EMAIL PROTECTED]:
Recent kernels have a workaround in that starts the card at slower clock
until the first bulk transfer completed successfully when it is cranked
up to 16MHz, that seemed to make the previous problems with some cards
pretty much go away.
Presumably
On Nov 22, 2008, at 7:28 PM, William Kenworthy wrote:
Have a look at /etc/defaults/dropbear - does it lock ssh to usb0 only?
BillK
This is what is my /etc/defaults/dropbear says
DROPBEAR_PORT=`ip addr list usb0 | awk 'BEGIN { FS=[ /]+ } /inet /
{ print $3 }'`:22
PGP.sig
Description:
Is buzzing issue linked with speaker?
When my freerunner has removed case and I'm calling to someone I can
hear silent buzzing. But I am sure it comes from back of the phone
(near GPS antenna), not from speaker. It is really silent and I can
hardly hear it with case putted on. It is there even if
2008/11/14 Wolfgang Spraul [EMAIL PROTECTED]:
How does all this relate to GTA03?
Well, on one hand internally we work around the clock as if we are
trying to start mass production of GTA03 next month. Sean would
certainly love to mass produce improved hardware _ANY TIME_ :-) Sean
always
so i wanted to ask you if you know a better way to install shr apps
under debian
The correct thing is to create debian packages for software in question.
Debian New Maintainer Guide [1] documents how to do so.
[1] http://www.debian.org/doc/maint-guide/
On Sun, Nov 23, 2008 at 9:14 PM, Nikita V. Youshchenko [EMAIL PROTECTED]
wrote:
The correct thing is to create debian packages for software in question.
Nomeata is already working on that.
--
Julien Cassignol
http://www.ainulindale.net
___
2008/11/23 Paul Fertser [EMAIL PROTECTED]:
Here's an ugly hack to do what you suggest:
bash -c 'xmodmap -e pointer = 2 3 1; /root/bin/waitclick.sh; xmodmap
-e pointer = 1 2 3'
where /root/bin/waitclick.sh:
#!/bin/sh
input-events 1 21 | ( grep -q -m 1 released kill $$ )
I couldn't find a
drac2000 wrote:
http://wiki.openmoko.org/wiki/Jokes http://wiki.openmoko.org/wiki/Jokes :-p
Just for the record, these were contributed by various people here:
http://www.mail-archive.com/community@lists.openmoko.org/msg33921.html
___
Openmoko
From: arne anka [EMAIL PROTECTED]
like writing past memory available, I guess it's because broken
environment.
hardly. i'd rather think you try to flash the wrong partition.
what exactly did you do and what exactly did dfu-util or the fr report?
I already flashed Freerunner several times
Hello.
I am wondering if and how it is possible to change the keyboard layout of
the Qtopia predictive keyboard. I've tried to search around, but only find
info on the Matchbox and Rasters Illume keyboard. I'm running 2008.testing.
1) How can I change the keyboard layout of the Qtopia predictive
2008/11/23 Jesus McCloud [EMAIL PROTECTED]:
rocks!
compared to my xfce dekstop i now DO see what raster meant (desktops on
diet)
I'm liking it too, definitely has immediately become my default,
replacing trayer+openmoko-panel-plugin. I especially like
- the and buttons for switching apps
Neil Jerram schrieb:
2008/11/23 Jesus McCloud [EMAIL PROTECTED]:
rocks!
compared to my xfce dekstop i now DO see what raster meant (desktops on
diet)
I'm liking it too, definitely has immediately become my default,
replacing trayer+openmoko-panel-plugin. I especially like
- the and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| From: arne anka [EMAIL PROTECTED]
|
| like writing past memory available, I guess it's because broken
| environment.
| hardly. i'd rather think you try to flash the wrong partition.
| what exactly did you
2008/11/23 Bernd Prünster [EMAIL PROTECTED]:
do you really care about segv ? this si not a debian issue, e17 is still in
development, but the recovery option is flawless (just my experience, but
ALWAYS worked and it doesn't take more that a few seconds, so you can still
answer a call if this
Replace with DROPBEAR_PORT=*:22 to connect via wifi, usb etc.
BillK
On Sun, 2008-11-23 at 12:00 -0800, Rodney Myers wrote:
On Nov 22, 2008, at 7:28 PM, William Kenworthy wrote:
Have a look at /etc/defaults/dropbear - does it lock ssh to usb0 only?
BillK
This is what is my
Am Sunday 23 November 2008 22:24:18 schrieb macebre:
Does somebody know which type I have to use there or where I could find
more information about this?
Is there a command to find out which Qt type is send by a signal?
Please consult the Qt DBus documentation, e.g.
2008/11/24 Andy Green [EMAIL PROTECTED]:
| dfu-util -a u-boot -R -D uImage-XX.bin
Hum the -a u-boot or -a 1 tells it to put stuff in the U-Boot
partition, it's the wrong one: uImage-blah.bin is a kernel image.
To flash the kernel, you need to tell it -a kernel or -a 3.
Ah yes, missed
Neil Jerram [EMAIL PROTECTED] writes:
2008/11/23 Bernd Prünster [EMAIL PROTECTED]:
do you really care about segv ? this si not a debian issue, e17 is still in
development, but the recovery option is flawless (just my experience, but
ALWAYS worked and it doesn't take more that a few seconds,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| 2008/11/24 Andy Green [EMAIL PROTECTED]:
| | dfu-util -a u-boot -R -D uImage-XX.bin
|
| Hum the -a u-boot or -a 1 tells it to put stuff in the U-Boot
| partition, it's the wrong one: uImage-blah.bin is
Nikita V. Youshchenko schrieb:
so i wanted to ask you if you know a better way to install shr apps
under debian
The correct thing is to create debian packages for software in question.
blah! sry but ipk and deb just differ in filetype...
No.
Distributions do call packages
Nikita V. Youshchenko schrieb:
Nikita V. Youshchenko schrieb:
so i wanted to ask you if you know a better way to install shr apps
under debian
The correct thing is to create debian packages for software in question.
blah! sry but ipk and deb just differ
IceWM + custom theme?!!!
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Neil,
We could not have said it better. In my view the surveys serve a
good, albeit limited, purpose. They get ideas out in the open and expose
potential shortcoming of various design decisions. In the end, design
decisions are complex system dependent choices, choices made under
Justyn,
I do hope Openmoko are giving the connectivity of the phone the
weighting
it deserves. ... However, for an increasing portion of the market it
is becoming
expected in any new smart phone.
...
So this email is about making sure that it is known that there is a
market of people
I'm uncertain if this is the right list to post to, however, I came
across this in ccontext of Android, but since it seems that most of
the distros are using GIT then this may be of broader general
interest.
http://google-opensource.blogspot.com/2008/11/gerrit-and-repo-android-source.html
cheers
Am Mo 24. November 2008 schrieb hiciu:
Is buzzing issue linked with speaker?
When my freerunner has removed case and I'm calling to someone I can
hear silent buzzing. But I am sure it comes from back of the phone
(near GPS antenna), not from speaker. It is really silent and I can
hardly
Am Mo 24. November 2008 schrieb W.Kenworthy:
Are there any statistics available on how many phones have been sold and
where - I ask out of interest, but realise this may be something thats
is commercially sensitive so wont be released.
BillK
Yes, exactly ;-)
cheers
jOERG
signature.asc
On Sun, Nov 23, 2008 at 10:19:51PM +0100, Ivar Mossin wrote:
Hello.
I am wondering if and how it is possible to change the keyboard layout of
the Qtopia predictive keyboard. I've tried to search around, but only find
info on the Matchbox and Rasters Illume keyboard. I'm running 2008.testing.
2008/11/24 Andy Green [EMAIL PROTECTED]:
|DFU is absent, dfu-util -l finds no suitable device to work with,
| maybe because I damaged it when I changed environment in minicom
| console or I uploaded wrong image onto that. AUX+POW on the phone,
| menu appears, dfu-util -l on desktop, and no
If you hold down the AUX / corner key when you power up, you should
come up in NOR U-Boot with a menu on the LCM. If that's true, you
should have 30s to do the DFU you want to do before it times out.
Yes, I know that, but I'm unable to connect to the phone through
DFU protocol because
67 matches
Mail list logo
