Hi Mathias,
I even took it one step further.
I can not get it to work properly on channel 11, so i set my accesspoint to
channel 1.
And i changed the script a little:
Exec=xterm -e ifconfig eth0 down ; iwconfig eth0 txpower off channel 0 ;
while killall wpa_supplicant; do echo 'Killing
Hi all,
I upgraded to 2008.11 (daily image of 04 december 2008) and i lost my
illume keyboard.
All i have now is the useless predictive keyboard.
Is there a way to re-install the illume keyboard again?
I did uninstall and install illume again, to no avail.
I am also missing a possibility to see
Hi Andreas,
Thanks for the pointer!
It does give you the qwerty keyboard again, but the tradeoff is i get
*** glibc detected *** enlightenment: realloc(): invalid next size:
0x0044cb10 ***
quiet a lot.
But that seems to be another problem.
Kind regards,
Ed
SNIP
Actually this is already in
Hi Bill,
I get an
Forbidden
You don't have permission to access /freerunner/illume.edj on this
server.
If i try to download the edje file.
Kind regards,
Ed(je)
Apache Server at wdk.dyndns.org Port 80
On Thu, 2008-12-11
Hi KaZeR,
My provider also only allow http(s).
If you happen to have acces to an ADSL connected linux box at home, it
is quiet easy to run proxytunnel
http://proxytunnel.sourceforge.net/
And you tunnel ssh over http(s) and use that to build an ppp link to the
ADSL connected linux box.
All
On Wed, 2008-12-17 at 16:12 +0100, Helge Hafting wrote:
Evgeny Karyakin wrote:
Dunno... First link propose a case suggesting iPhone look, I think
we shouldn't follow everything Apple come out with, and I second to
pill case. When I first saw GTA02 look, I thought it's ugly, but that
Linus Gasser wrote:
Hi,
I have the same problem - did they put in a non-compatible kernel
version with regards to module? Does anybody have a working Om 2008.12
version?
I checked the md5sums and they seem to be OK.
- Is it necessary to flash more than the JFFS and the uImage?
- Do I
down
iwconfig eth0 txpower off
iwconfig eth0 channel 0
iwconfig eth0 essid off
before i make new settings for the wireless connection.
Good luck!
Kind regards,
Ed
On Mon, 2008-12-22 at 01:47 -0800, swap38 wrote:
swap38 wrote:
Ed Kapitein a écrit :
I ran into a similar problem
Hi Jan,
You could try to work on the low level first:
If you activated gps in the settings, try to do
cat /dev/ttySAC1
this should give you some output like this:
r...@freerunner:~# cat /dev/ttySAC1
NMEA unknown msg*58
$GPTXT,01,01,01,NMEA unknown msg*58
$GPTXT$GPRMC,,V,,N*53
this
Hi arne anka,
Just as a reference:
I use navit on OM2008.12 and for short route's (~ 10 Km) it works just
fine.
for longer routes (~ 100 Km ) CPU usage goes to 90% and it becomes
*very* unresponsive.
So please try with a short route first.
Kind regards,
Ed
Davide Scaini wrote:
might it be an
Marc Bantle wrote:
Anton Persson schrieb:
Hi,
I thought I would give the new 2008.12 release a good whirl for a few
days, but
I was stopped before I could start by this: I can't receive text sms
messages... :-(
Does anyone else have this problem? Is there a work-around?
Works
Hi Jan,
I had the same problem and found an even dirtier sollution ;-)
I found that sometimes gsm0710muxd will give an /dev/pts/X but you can
not use it, there is no response from the modem.
And sometimes even stopping gsm0710muxd and starting it again would not
help.
so in order to have it
Jan Henkins wrote:
SNIP
echo 1 /sys/devices/platform/neo1973-pm-gsm.0/power_on
Off-topic question: Is there something similar to this in order to get the
GPS to start up?
sure,
echo 1 /sys/bus/platform/drivers/neo1973-pm-gps/neo1973-pm-gps.0/pwron
for power on and
echo 0
did you try so set the glamo_mci.sd_max_clk, acording to:
http://docs.openmoko.org/trac/ticket/1743 ?
Kind regards,
Ed
On Tue, 2008-12-30 at 14:17 +, Ruben Leote Mendes wrote:
Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu:
I've been trying to boot 2008.12 from a microsd but it just
You might also consider a 12/220V converter. ( or 110V ofcourse)
You can than also plug in your shaver, ipod charger and the lot.
I did it last time when traveling and it worked for me.
just my 2 cts.
Kind regards,
Ed
Rui Miguel Silva Seabra wrote:
On Sat, Jan 03, 2009 at 11:57:19AM -0800,
Hi All,
I use IPV6 and minimo doesn't seem to support it.
Is there a way to get ipv6 working with it?
Kind regards,
Ed
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi Sargun,
IPv6 is not the problem, om2008.12 supports it. it is minimo that
refuses to show ipv6 only sites.
Kind regards,
Ed
On Thu, 2009-01-22 at 00:49 -0800, Sargun Dhillon wrote:
Installing debian would be one. I use Debian with v6 regularly.
On Thu, Jan 22, 2009 at 12:40 AM, Ed
Well i got it from:
http://wiki.openmoko.org/wiki/Minimo#Installing_Minimo_web_browser -
wget http://www.ginguppin.de/files/minimo.tar.bz2
So i guess it is build w/o ipv6 support.
I checked today and the version is still the same one i have already.
Kind regards,
Ed
On Thu, 2009-01-22 at 10:32
Hi Sander,
Your build is also not supporting ipv6. i narrowed it down to minimo not
resolving ipv6 addresses.
Using http://[2001:4860:0:1001::68] works.
Using http://ipv6.google.com does not work.
ping6 ipv6.google.com from the command line also works.
PING ipv6.google.com
Openmoko.com and openmoko.org do not seem to have SPF records in DNS.
( http://www.openspf.org )
Can someone please add these records? it would help stop spreading these
false mails.
Kind regards,
Ed
Christian Fredrik Kalager Schaller wrote:
I got the exact same email sent from 'myself' earlier
Christ,
You know that the packages are available at
http://download.navit-project.org/navit/openmoko/svn/ ?
Kind regards,
@
On Mon, 2009-01-26 at 16:07 +0100, Christ van Willegen wrote:
On Mon, Jan 26, 2009 at 3:46 PM, arne anka openm...@ginguppin.de wrote:
You mentioned navit in your
Hi,
Sounds like a great app!
any change of getting this to work on 2008.12 ?
Kind regards,
Ed
c_c wrote:
Hi,
Well, here's the new release of Guitar Tune
http://n2.nabble.com/file/n2254283/guitartune_0.20_arm.ipk (download) . Also
available on opkg.org and http://guitartune.googlecode.com/
On Wed, 2009-02-04 at 11:12 +0200, Margo Koppelmann wrote:
On Wed, Feb 4, 2009 at 10:55 AM, Thomas Otterbein th.otterb...@gmx.net
wrote:
To take part in the survey click here:
http://spreadsheets.google.com/viewform?key=p2ZQdcRSVg9XfYLwBVsZicg
I can't answer the question What band
Hi,
Nice app, but not really functional for me. it picks the wrong note for
the string, so when playing a G the tuner hears a A.
And that seems to happen to other strings as well.
That might have to do with the harmonics created by my guitar.
is it possible to select manually which string you
Hi,
Thanks for the reply.
I put my comments inline, so see below.
On Thu, 2009-02-05 at 05:11 -0800, c_c wrote:
Hi,
Ed Kapitein wrote:
... so when playing a G the tuner hears a A.
Well, I only own two accoustic guitars - and it seems to be quite accurate
for me
Thanks!
Perhaps you need to change 2009.12
http://wiki.openmoko.org/index.php?title=2009.12action=edit to 2008.12 ?
Kind regards,
Ed
Simon Kagstrom wrote:
On Sun, 08 Feb 2009 21:36:03 +0100
arne anka openm...@ginguppin.de wrote:
I just wanted to mention that after following Lothar
Hi Rikard,
Yes, take a look at www.opencellid.org.
This will give you your rough location and you can use that to get the
agps data for your area.
I have some scripts that will do that for you, so just let me know if
you are intressted.
Kind regards,
Ed
On Tue, 2009-02-17 at 09:24 +0100,
Well, i put a tarball together with my scripts and put it on my website.
http://www.kapitein.org/openmoko
Please read it carefully before installing.
All feedback is welcome ofcourse.
Kind regards,
Ed
On Tue, 2009-02-17 at 11:42 +0200, Risto H. Kurppa wrote:
On Tue, Feb 17, 2009 at 10:40 AM, Ed
Hi,
Why setting up your own database, while opencellid has
TotalCells:106120 acording to http://www.opencellid.org/cell/stats ?
I think using there database will concentrate the data in on place and
will give you a better coverage.
Kind regards,
@
On Fri, 2009-02-20 at 09:54 +0100, Onen wrote:
to contact them also. We have no answer so
far.
No license does mean: you cannot use it at all, because you do not have any
idea
of your rights over it.
Hope this answer your question.
Onen
Quoting Ed Kapitein e...@kapitein.org:
Hi,
Why setting up your own database, while opencellid
Hi Kimaidou,
I put some script on http://wiki.openmoko.org/wiki/User_talk:Kapiteined
and start and stop gps in those scripts.
And also clean the gps logs from data without a valid lat/long (thus
without having a fix).
Please feel free to browse trough the scripts and use whatever you like
about
Hi kimaidou,
on om 2008.12 do:
-1 in settings turn on gps hardware
-2 start gpsd (/etc/init.d/gpsd start)
-3 read the gps data (gpspipe -r)
To check if you have a fix, you might want to clean out the lines that
have no lat/long info like this:
gpspipe -r | grep GPGGA | grep -v ',,'
And to
Hi Kimaidou,
If you take a look at http://www.opencellid.org/cell/list and search for
France, you will see a lot of cells.
Kind regards,
Ed
On Fri, 2009-02-27 at 11:00 +0100, kimaidou wrote:
Hi all,
I read some emails on the list about cellhunter, opencellid and other
projects. Since it is
perhpas you can do:
which locale
and
opkg search `which locale`
That will list the packages that contains locale
Kind regards,
@
On Mon, 2009-03-02 at 19:39 +0800, Daniel.Li wrote:
On Mon, 2009-03-02 at 11:21 +0100, Matthias Apitz wrote:
El día Monday, March 02, 2009 a las 11:14:41AM
Ticket #2223 is also open and might apply to SHR-ustable as well.
Kind regards,
Ed
Al Johnson wrote:
If you suffer from #1024 and haven't disabled deep sleep you will probably
drop the connection on every reregistration. It may cause longer lasting
problems with some networks too -
On Fri, 2009-03-06 at 07:52 +0100, Matthias Apitz wrote:
Hi,
The question is seriously, so please don't respond with 'use the right
finger': How can I generate the X11 event ButtonPress/ButtonRelease for
button 3, i.e. the right button of the mouse, with the touchpad of the
FR? Thx
On Fri, 2009-03-06 at 09:04 +0100, Matthias Apitz wrote:
El día Friday, March 06, 2009 a las 08:54:49AM +0100, Ed Kapitein escribió:
On Fri, 2009-03-06 at 07:52 +0100, Matthias Apitz wrote:
Hi,
The question is seriously, so please don't respond with 'use the right
finger': How
Al Johnson wrote:
On Monday 09 March 2009, KaZeR wrote:
Hello list.
Last week i was in holidays, far away from home. And the Internet.
So i took my laptop, and setup a gprs connection using my Sony phone. Using
bluetooth it's done within a breath : setup a rfcomm channel to the
Just for trouble shooting purposes:
What happens if you connect an USB stick?
Kind regards,
Ed
Carsten Gerlach wrote:
Hello everybody,
next week i want to go skiing and track the piste for Openstreetmap. But I
don't want to use the Freerunner for that but the i-blue 747 from Transystem.
I
Hi Fernando,
On Thu, 2009-03-12 at 22:19 +0100, Fernando Martins wrote:
Hi,
1) I got the date reset to 1970 a few times. I was not paying attention
but I guess this happens when battery is removed, i.e., there's no
battery specific for the clock?
2) Several posts mentioned that GPS
Hi Risto,
I took the liberty to add an IPv6 test to the test cases.
Please remove it if you feel the number of tests is getting to much.
Kind regards,
Ed
Risto H. Kurppa wrote:
Hi!
Since the current state of web browsers for OM distributions is now
really bad, I was planning to write a
Risto H. Kurppa wrote:
On Sat, Mar 14, 2009 at 10:26 AM, Ed Kapitein e...@kapitein.org wrote:
Hi Risto,
I took the liberty to add an IPv6 test to the test cases.
Please remove it if you feel the number of tests is getting to much.
Kind regards,
Ed
I think it's a good to test
Hi Leonti,
Try installing font-adobe-75dpi
http://downloads.openmoko.org/repository/Om2008.8/all/font-adobe-75dpi_1.0.0-r0_all.opk
(opkg install font-adobe-75dpi
http://downloads.openmoko.org/repository/Om2008.8/all/font-adobe-75dpi_1.0.0-r0_all.opk
)
it works for me on om2008.12
Kind regards,
fonts.
Leonti
On Thu, Mar 19, 2009 at 1:42 PM, rakshat hooja raks...@gmail.com wrote:
Can someone put an Xboard package on opkg.org
Thanks in advance
Rakshat
On Thu, Mar 19, 2009 at 5:33 PM, Ed Kapitein e...@kapitein.org wrote:
Hi Leonti,
Try installing font-adobe-75dpi
http
Francesco de Virgilio wrote:
Ed Kapitein ha scritto:
Hi Leonti,
Try installing font-adobe-75dpi
http://downloads.openmoko.org/repository/Om2008.8/all/font-adobe-75dpi_1.0.0-r0_all.opk
(opkg install font-adobe-75dpi
http://downloads.openmoko.org/repository/Om2008.8/all/font-adobe
Tuan TRINH wrote:
Hi all,
Is there any guru success in making a data call (over CSD) with
QtExtended 4.4 ? I follow the sample code in qt-extended doc but no
success yet.
Thanks,
TAT
, Mike Montour m...@mmontour.net
mailto:m...@mmontour.net wrote:
Ed Kapitein wrote:
I am also looking for a way to make data calls, do you know of
any other
method of making a data call with the FR?
( direct AT commands to the modem etc)[...]
All pointers are welcome
to check but it reports no
error as:
AT+CEER
+CEER: 0,1,1,255,no error
With the first 4 ATs, I can make a voice call successfully.
Cordially,
Tuan
On Sun, Mar 22, 2009 at 6:23 PM, Ed Kapitein e...@kapitein.org
mailto:e...@kapitein.org wrote:
Tuan TRINH wrote:
Yes, my GSM carrier
after modem completes hand-shaking with far end
modem. Unfortunately, I still can not have hand-shaking done :-((
Cordially,
Tuan
On Sun, Mar 22, 2009 at 8:10 PM, Ed Kapitein e...@kapitein.org
mailto:e...@kapitein.org wrote:
Hi Tuan :-)
well, it seems like you are almost
On Mon, 2009-03-23 at 16:51 +0300, Paul Fertser wrote:
arne anka openm...@ginguppin.de writes:
And don't forget that the proposed rework doesn't fix wired headset
mic, it will still produce a lot of buzz.
how's that?
i lived under the impression that the buzz is basically one buzz and
Hi Tuan,
I was able to make a datacall to a landline modem :-)
So you can use your freerunner to dial in to an ISP if you like.
i wil paste the proof of my success below.
Now i just need to find a way to make it less expensive...
Kind regards,
Ed
MODEM=$(dbus-send --system --print-reply
do voice call normally.
Do you have any way to debug the status of data call while using AT
commands? I just know +CEER but it does not give much info.
Cordially,
Tuan
On Wed, Mar 25, 2009 at 3:33 AM, Ed Kapitein e...@kapitein.org wrote:
Hi Tuan,
I was able
data calls, so that is a
good thing too.
Good luck, and let us know your success/failures, we all can learn from
it.
Kind regards,
Ed
On Fri, 2009-03-27 at 13:11 +0700, Tuan TRINH wrote:
Hi Ed,
My answers are bellow.
On Thu, Mar 26, 2009 at 5:56 PM, Ed Kapitein e...@kapitein.org wrote
Hi Jospeh,
That is where i got my FR.
Good reseller, i would buy there again.
Kind regards,
Ed
Joseph Reeves wrote:
That would make sense...
After a bit of googling for belgium openmoko (a perfectly normal
search term, honest...) I found this reseller that I'd never seen
before:
Hi Radek,
I was looking for a GPS bluetooth mouse with solar pannels for longer
navigating.
It seems that it is hardly worth the effort, it will give you a few
precent longer uptime and time to full charge would be like days.
Just my 2 cents.
Kind regards,
Ed
On Thu, 2009-04-02 at 10:17
Angus Ainslie wrote:
Spring a time for new beginnings and we have a plan. An Om2009 release
plan that is.
For the remainder of March we are going to be integrating. We're going
put FSO milestone 5.5, the stable kernel, paroli and the new xorg-glamo
drivers together and make our most stable
Hi all,
First impressions:
wow, how do i get used to this?
it probably will take a while, but i'll get trough it.
If i open paroli ( or any other app for that matter ) how do i get back
to ilume?
I am killing it now from an ssh session, but there must be a better
way ;-)
i found out that you
François TOURDE wrote:
Le 14349ième jour après Epoch,
Ed Kapitein écrivait:
i found out that you can chage from silent to default profile by
pressing the aux button.
Is there an url with a tutorial on how to use the new image?
If it's for paroli, check at:
http://www.paroli
SNIP
PS: where should the stylus be inserted ?
on the left hand side there is a small hole, just above the speaker.
You can insert the stylus there, but it might take considerable force.
Kind regards,
Ed
In the empty beer bottle ?
___
On Thu, 2009-05-07 at 10:23 +0100, Tom Yates wrote:
On Tue, 5 May 2009, Petr Vanek wrote:
Hi Angus,
thank you for the info and hard work.
+1
SNIP
i also find this.
Bugs fixed
Power button does not shutdown device
not for me :)
ditto.
+1
i still have it on so i can
Vasco Névoa wrote:
Citando Helge Hafting helge.haft...@hist.no:
Ouch.
Having the framework _managing_ the gps (turn on/off, configure,...) is
fine. But why regenerate the data, what is wrong with pass-through? The
more cpu work, the more delays. And the gps may very well be used for
Hi Laszlo,
Don't forget to set your location in the navit.xmlfile too.
( navit center= )
Make sure you map covers the location entered there.
you also might need to remove the center.txt file.
In the gtk interface there should be a pulldown menu map in the top
bar, is that present?
That would
Hi all,
i need a script/program that will read a crontab line
( * * * * * some_action) and output the date and time the job will run.
Does anyone know of such a tool?
This way i can un-suspend the FR a few seconds prior to the start of
that cron job.
I already made a script that sort of works,
Alexey Feldgendler wrote:
On Fri, 29 May 2009 15:49:27 +0200, Ed Kapitein e...@kapitein.org wrote:
i need a script/program that will read a crontab line
( * * * * * some_action) and output the date and time the job will run.
Does anyone know of such a tool?
This way i can un-suspend
?
Thanks !
Kind regards,
Ed
On Sat, May 30, 2009 at 4:21 PM, Ed Kapitein e...@kapitein.org wrote:
Alexey Feldgendler wrote:
On Fri, 29 May 2009 15:49:27 +0200, Ed Kapitein e...@kapitein.org wrote:
i need a script/program that will read a crontab line
readable format
print scalar(localtime($nexttime)) . \t;
# the rest of the line from the crontab file
@command = $$e{'args'};
print $command[0][0];
print \n;
}
# END OF SCRIPT
On Sat, May 30, 2009 at 6:29 PM, Ed Kapitein e...@kapitein.org wrote:
Ben Wong wrote
SNIP
3-Can we have stream gprs from phone to pc by bluetooth by FR ?
I can't see why couldn't it be done, actually I think someone have
done it already.
Whould let me know who had done that ?any link ?where can be that work
be found ?
Perhaps you need to make a bit more clear what you
just another buzzer ?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On Wed, 2009-06-10 at 23:27 -0500, Mike wrote:
I am now trying 192.168.0.202 and have no response. In fact, I get:
ping -I usb0 192.168.0.202
PING 192.168.0.202 (192.168.0.202) from 192.168.0.200 usb0: 56(84) bytes of
data.
From 192.168.0.200 icmp_seq=1 Destination Host Unreachable
From
With the full body cover, can you still easily remove the back cover to
replace the uSD card/batery/SIM ?
Kind regards,
Ed
On Mon, 2009-06-15 at 00:31 -0700, Ben Wong wrote:
Does a particular model of invisibleSHIELD fit FR or you had to cut an
oversized one to shape?
There is an
And to reflect the openness of the FR it would be nice to have a
(semi) transparent (see trough) case.
Kind regards,
Ed
David Ford wrote:
to whomever does this, please put a small stylus into a recess in the
new case :)
On 06/18/09 20:18, Werner Almesberger wrote:
[ Let's give threads that
Hi all,
I would like to automatically record each call i receive.
I did try to run arecord, but that doesn't record any sound (neo side or
other side)
I allready took a look at dictator, but that seems to be toying with the
state files, if i read the source code corectly ( probably not...)
Is
Thanks Matthias,
Seems like a fine solution to me, what switches are set to what value?
I would like to record both the incomming voice and my own voice.
Implementing this in a script seems not to difficult too.
Kind regards,
Ed
On Fri, 2009-07-10 at 15:15 +0200, Matthias Felsche wrote:
Perhaps over the top, but how about a button/menu item, to send your gps
coordinates to your buddys?
(nice feature for the comming holidays ;-) )
http://www.openstreetmap.org/?mlat=51.980421667mlon=4.358515000zoom=17
Kind regards,
@
On Thu, 2009-07-16 at 09:48 -0700, Alex Teiche wrote:
Wow
Hi Enrique,
If you just need a phone, goto
http://wiki.openmoko.org/wiki/Flashing_the_Neo_FreeRunner
Use the latest om2009, flash kernel and rootfs, reboot twice and scream :-)
This will give you a basic phone you can use right away, and it will
give you the opertunity to toy when you have more
On Tue, 2009-07-21 at 11:20 +0200, Xavier Cremaschi wrote:
Hi folks,
I have been using tangogps since the beginning of my Openmoko life (july
08), and now I've got lots of openstreetmap tiles stored on my microSD
which cover useful areas for me.
Does anyone know how I can update my tiles
On Fri, 2009-07-24 at 22:25 +1200, Robin Paulson wrote:
2009/7/21 Ed Kapitein e...@kapitein.org:
for TILE in `find /path/to/tiles -type f`; do
echo ${TILE}
FILE=`basename ${TILE}`
L1=`dirname ${TILE} | gawk -F/ '{ print $NF}'`
L2=`dirname ${TILE} | gawk -F/ '{ print $(NF-1
Hi All,
A while ago i made some scripts to use menu's on the freerunnner.
I would like to share it, perhaps it will help someone to enjoy his
freerunner more.
I made a little demo video on: http://www.youtube.com/watch?v=ondozQyzRdk
And put some info and a link to the scripts on:
arne anka wrote:
a long time ago i was one time able to do some kind of route planning.
then, there was a way to select the country i am in.
but ever since then, this selection is not available anymore, navit
plainly assumes i am in denmark and there's no way, to tell it off.
since i use
jeremy jozwik wrote:
mornin list, ive got a crap memory. and i used to use a password
manager on my old blackberry that was, oddly enough, password
protected. so my question today is weather or not it is possible to
password protect a file on the openmoko so much so root cannot access
it
RANJAN wrote:
Cool, thanks to the hint of Johan Hedberg from BlueZ project i finally
got it fully working. [1] Enjoy, improve and share.
[1]
http://wiki.openmoko.org/wiki/Manually_using_Bluetooth#Information_about_bluez4_networking
Tried installing blueman but I got
Laszlo KREKACS wrote:
Hi!
Hi Laszlo,
I am an electronics engineer and would like to help you.
I have already bought 3 different usb chargers, and I can test them.
I also just ordered two additional chargers from ebay.
So I would like to know any details, how to make objective (neutral)
arne anka wrote:
DISPLAY=:1 foo
... doesn't work for me
DISPLAY=:0 foo
?
- do you have X running on your host for your host's user at all?
- has your ssh x-forwarding enabled?
___
Openmoko community mailing list
Hi Rainer,
Thanks for sharing your work with us.
Why did you put the capacitor on the right hand side and extended it
with the yellow wire?
The wire might pick up a signal and cause other trouble.
There seems to be room to fit the extra capacitor on the left hand side,
between the two black IC's.
On Mon, 2009-08-31 at 16:58 -0400, Cameron Frazier wrote:
Evening all,
I'll be heading to the EU for a little over 2 weeks in a week or so,
and am in need of some advice. I'd like to use my FR over there, and
as such need a prepaid SIM.
As for requirements;
1) I'd like to use the same
Rask Ingemann Lambertsen wrote:
On Sat, Sep 12, 2009 at 07:50:26PM +0200, Ivo van den Maagdenberg wrote:
The use case is as follows: take the openmoko and make it a cycleway shock
measuring platform, utilizing the accelerometers. So, direct reads from the
are going to be needed. The gps
\It seems like it is a file, not a directory, so cd into it will fail.
Just my 2 cents.
Kind regards,
Ed
jeremy jozwik wrote:
2009/9/19 Łukasz Pankowski lukp...@o2.pl:
You can change the color by setting ``color`` to ``red, blue,
green`` (numbers in range 0-255) in your
c_c wrote:
SNIP
Help needed
1. sample code for a service using c + dbus / e-dbus
2. How do I set an alarm that can wake up the phone from suspend?
Hi c_c,
I wrote a script a while ago that does just that:
Wake my freerunner in the morning from suspend and play some music to
wake me
Baruch Even wrote:
SNIP
I found this in the source of ogpsd on my Freerunner:
def initializeDevice( self ):
# Use high sensitivity mode
#self.send(CFG-RXM, 2, {gps_mode : 2, lp_mode : 0})
# Enable use of SBAS (even in testmode)
self.send(CFG-SBAS, 8, {mode : 1, usage :
Hi all,
We will be traveling trough the mid-west of the USA this summer for
about a month.
And i am looking for a way to have mobile internet on my freerunner
while doing so. (freerunner used as a modem for my laptop too)
What are the experiences with mobile data in that part of the US?
What is
Jens Seidel wrote:
Hi,
I always wondered how people use navit. I started it already a few times but
find it (in contrast to tangogps) completely unusable.
Once I start it I just get an empty background. Shouldn't it display a map?
I read http://wiki.openmoko.org/wiki/Navit and tried the
Hi all,
I would like to set a bigger font for shr-messages.
I am not using shr-unstable, but Gentoo with the matchbox window manager.
Any idea on how and where to set the font definition?
Kind regards,
Ed
___
Openmoko community mailing list
Hi Christian,
i am trying to use navit and dbus, but so far i haven't find out how to
do it.
I did download your source, but how do i build it?
( real noob here...)
Could you explain how to build it from source?
I am used to ./configure, make, make install
Can you give an example of dbus-send to
Hi Christian,
Thanks a lot for your explanation!
I think i had the same problem you had, i can't set a destination with
the current version of navit.
(Dbus is enabled)
So, i will ask the people from the navit team on how to use dbus with
the current version.
Thanks again and happy new year
if this is the correct way though - no reply on navit user ML yet...
Cheers,
Christian
[1]
http://navit.svn.sourceforge.net/viewvc/navit/trunk/navit/navit/binding/dbus/binding_dbus.c?view=markup
Am Mittwoch, 30. Dezember 2009 schrieb Ed Kapitein:
Hi Christian,
Thanks a lot for your
=markup
Am Mittwoch, 30. Dezember 2009 schrieb Ed Kapitein:
Hi Christian,
Thanks a lot for your explanation!
I think i had the same problem you had, i can't set a destination with
the current version of navit.
(Dbus is enabled)
So, i will ask the people from the navit team
Or try a diffrent hub/no hub at all.
My FR works fine with the same cable plugged into my desktop POC, but
when i plug the same cable in one of my hubs, it only charges and no
data connection is possible
Kind regrads,
Ed
On Thu, 2010-03-04 at 15:39 +0800, William Kenworthy wrote:
I'll
Hi Brolin,
If you are willing to sell, i am intrested in the 900Mhz one.
what would it cost me if you send one over to the netherlands?
Kind regards,
Ed
On Thu, 2010-03-04 at 11:22 -0800, Brolin Empey wrote:
Hello FreeRunners,
I just bought the following for 150 USD + UPS Ground shipping to
Hi Djdas,
Thanks for the new FR software.
I did try it just yet and ran into some problems.
Where am i supposed to put the software? SD card? Nand? doesn;t matter?
I put it on the Nand and flashed the kernel to Nand as well, but it
doesn't boot at all.
Having a choice is a good thing and if
Hi Carsten,
Thanks for all the time you take, answering questions about glamo in
this list, i really appreciate it.
I am sure i don't understand half of the technology bottle necks that
the glamo has, but if the limit is 512x512 for 3D and 2D, would it be
possible to just use 480x512 on the FR?
1 - 100 of 217 matches
Mail list logo
