I'd like to see a 1024x768 @ 75Hz option added in the generic monitor section
when you configure x on the install. there is presently only 1024x768 @70 Hz.
Then I wouldn't have to manually set my monitor, and it would stop asking me
to select 75Hz everytome I boot up.
Robert Crawford
On 2003-06-27(Fri) 17:27:03 -0400, Charles A Edwards wrote:
Yes, the stock libtool 1.5 has just partially fixed the DESTDIR issue.
Now at least stuff can build successfully even if no preinstalled
libraries were present, but if you have preinstalled older libraries,
then these old
francesco.melo [EMAIL PROTECTED] writes:
[EMAIL PROTECTED] vete]# userdrake
Can't call method set_active on an undefined value at /usr/sbin/userdrake
line 81.
[EMAIL PROTECTED] vete]#
Could you test with userdrake-0.92-2mdk ?
Q: Ever considered putting the Mandrake RPM Howto (and other policy
documents) on the wiki?
In http://qa.mandrakesoft.com/twiki/bin/view/Main/PackagingTask there is
a section where policy updates are being collected. Why not add /
merge those into the policy right away, with a special comment
On 2003-06-28(Sat) 16:20:50 +0800, R.I.P. Deaddog wrote:
The problem occurs when there is gettext 0.11.x preinstalled. You can
run into trouble (the resulting gettext 0.12.1 requires gettext 0.11.x
libraries). That's the result I got with the stock libtool 1.5.
If words are not clear enough,
http://qa.mandrakesoft.com/show_bug.cgi?id=4121
--- Additional Comments From [EMAIL PROTECTED] 2003-28-06 14:24 ---
It's perhaps a bug related to devfsd-1.3.25-28mdk.
Since I've upgraded to kernel-2.4.21-0.0.1mdk-1-1mdk and devfsd-1.3.25-28mdk,
/dev/fd0 and /dev/scd* are not created
Ainsi parlait Stefan van der Eijk :
Q: Ever considered putting the Mandrake RPM Howto (and other policy
documents) on the wiki?
In http://qa.mandrakesoft.com/twiki/bin/view/Main/PackagingTask there is
a section where policy updates are being collected. Why not add /
merge those into the
Alle 10:26, sabato 28 giugno 2003, Daouda LO ha scritto:
francesco.melo [EMAIL PROTECTED] writes:
[EMAIL PROTECTED] vete]# userdrake
Can't call method set_active on an undefined value at
/usr/sbin/userdrake line 81.
[EMAIL PROTECTED] vete]#
Could you test with userdrake-0.92-2mdk ?
i
I guess everybody in this thread was trying to boot the kernel on an AMD
based machine. Is this correct?
Have people been able to boot this kernel? On which CPU?
Stefan
This (enterprise-) kernel doesn't want to boot on my box (Asus
NForce2, AMD althonXP, 1.5Gb). It panics before init message
On Saturday 28 June 2003 00:54, Dave Cotton wrote:
On Sat, 2003-06-28 at 00:25, John van Spaandonk wrote:
I can print .pdf files from the
command line both using lp and lpr.
Then I commented
Just the same, but how did we end up with lp -d printer_name and lpr -P
printer_name,
Have people been able to boot this kernel? On which CPU?
Yes, I use this new kernel with a AMD XP 1800+ and a ECS K7S5A motherboard.
On 2003-06-28(Sat) 13:28:14 +0200, Stefan van der Eijk wrote:
I guess everybody in this thread was trying to boot the kernel on an AMD
based machine. Is this correct?
Have people been able to boot this kernel? On which CPU?
I've got the same error too, on a Pentium 3 mobile.
Abel
Stefan
lördagen den 28 juni 2003 13.28 skrev Stefan van der Eijk:
I guess everybody in this thread was trying to boot the kernel on an AMD
based machine. Is this correct?
Have people been able to boot this kernel? On which CPU?
Oops, I forgot to say..., I have a
AMD Athlon(tm) XP 1700+ on a Epox
On Saturday 28 June 2003 09:39, Stefan van der Eijk wrote:
Q: Ever considered putting the Mandrake RPM Howto (and other policy
documents) on the wiki?
In http://qa.mandrakesoft.com/twiki/bin/view/Main/PackagingTask there
is a section where policy updates are being collected. Why not add
/
Stefan van der Eijk wrote:
I guess everybody in this thread was trying to boot the kernel on an AMD
based machine. Is this correct?
My Asus notebook (on which the kernel panics) has an Intel Pentium III
(mobile) processor.
Till
On Thu, 2003-06-26 at 07:12, Quel Qun wrote:
On Wed, 2003-06-25 at 13:49, Stefan van der Eijk wrote:
This (enterprise-) kernel doesn't want to boot on my box (Asus NForce2,
AMD althonXP, 1.5Gb). It panics before init message is shown on the screen.
Anybody else?
Ordinary kernel.
On Sat, 28 Jun 2003 17:35:54 +0800
R.I.P. Deaddog [EMAIL PROTECTED] wrote:
If words are not clear enough, let's see command output under
buildroot:
That,s not the output I get.
You might want build libtool-1.5 using the patches from the rh
libtool-1.5-3.src.rpm
[EMAIL PROTECTED] charles]$
Hi, there,
I am trying to setup postfix smtp auth (PLAIN and CRAM-MD5)
with cyrus-sasl. My sytem is a mandrake 9.1 with postfix 2.0.12
from cooker, and the stock cyrus-sasl 2.1.12.
The result is:
sasl2-sample-server and sasl2-sample-client works ok with
auxprop in
This problem is not due to the kernel.
Reinstall the previous version of devfsd (-27mdk) and all will be fine.
Get the spec file from the cvs.
Austin
http://pingus.seul.org/~grumbel/tmp/robovasion/webpage/welcome.html
RoboVasion is a Real Time Strategie game along the lines of
other popular Real Time Strategie games. It will be based on
the GPLed Stratagus Engine (formaly known as Freecraft) and
feature around five
http://qa.mandrakesoft.com/show_bug.cgi?id=4121
--- Additional Comments From [EMAIL PROTECTED] 2003-28-06 19:29 ---
It's not the kernel. I upgraded only devfs, and now I have the same problem,
including the NV driver problem.
Austin
--
Configure bugmail:
Xiong Jiang [EMAIL PROTECTED] writes:
Hi, there,
I am trying to setup postfix smtp auth (PLAIN and CRAM-MD5)
with cyrus-sasl. My sytem is a mandrake 9.1 with postfix 2.0.12
from cooker, and the stock cyrus-sasl 2.1.12.
Mixing packages from different distributions is not supported
(e.g.
http://qa.mandrakesoft.com/show_bug.cgi?id=4095
--- Additional Comments From [EMAIL PROTECTED] 2003-28-06 19:38 ---
I am having similar problems wiht vanila 2.4.21-0.13mdk and 2.4.21-0.18mdk
using gcc (GCC) 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk) - which I think is
latest update of
http://qa.mandrakesoft.com/show_bug.cgi?id=1751
--- Additional Comments From [EMAIL PROTECTED] 2003-28-06 19:54 ---
seems to be working fine now, no forced installed needed
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
--- You are receiving this mail
http://qa.mandrakesoft.com/show_bug.cgi?id=4122
Product: kdevelop
Component: packaging
Summary: kdevelop dependencies complaints
Product: kdevelop
Version: 2.1.5-6mdk
Platform: PC
OS/Version: All
Status:
http://qa.mandrakesoft.com/show_bug.cgi?id=4121
--- Additional Comments From [EMAIL PROTECTED] 2003-28-06 20:18 ---
confirmed once more - I've not updated the kernel (new one sounds like a
disaster area) and nvidia doesn't start on boot.
--
Configure bugmail:
El s?, 28-06-2003 a las 03:41, Bernard Varaine escribi:
get this error after upgrading as of cooker last night
Can't call method signal_connect on an undefined value at
/usr/lib/libDrakX/ugtk2.pm line 1282.
BErnard
This probrelm is solved in new cooker package.
M. Ignacio Monge Garca
Stefan van der Eijk [EMAIL PROTECTED] said:
Q: Ever considered putting the Mandrake RPM Howto (and other policy documents)
on the wiki?
In http://qa.mandrakesoft.com/twiki/bin/view/Main/PackagingTask there is a
section where policy updates are being collected. Why not add / merge those
into
Perhaps that would explain the other problem I've seen lately. It appears
that mkinitrd no longer works because the loopback device is not present.
I'm not expert enough to say that is the reason, but it seems likely, since
even earlier versions of the kernel suddenly lack a loopback device
After finially getting a copy (dl) of 9.1 i started poking around and
found the TV Drake ap.
Good that an ap is there bad that it does not see my Ati Radeon All In
Wonder 7500.
Does anybody know of documentation for how to get My tv tuner working ?
(modules.conf lines and what rpms i need)
http://qa.mandrakesoft.com/show_bug.cgi?id=2872
--- Additional Comments From [EMAIL PROTECTED] 2003-28-06 22:01 ---
207 identical posts !!??
Anyway, will there be a drakxtools update for LM 9.1 ? Cooker seems already
geared for LM 9.2.
--
Configure bugmail:
francesco.melo [EMAIL PROTECTED] writes:
Alle 10:26, sabato 28 giugno 2003, Daouda LO ha scritto:
francesco.melo [EMAIL PROTECTED] writes:
[EMAIL PROTECTED] vete]# userdrake
Can't call method set_active on an undefined value at
/usr/sbin/userdrake line 81.
[EMAIL PROTECTED] vete]#
Q: Ever considered putting the Mandrake RPM Howto (and other policy documents)
on the wiki?
In http://qa.mandrakesoft.com/twiki/bin/view/Main/PackagingTask there is a
section where policy updates are being collected. Why not add / merge those
into the policy right away, with a special comment
Michael Scherer wrote:
On Saturday 28 June 2003 09:39, Stefan van der Eijk wrote:
Q: Ever considered putting the Mandrake RPM Howto (and other policy
documents) on the wiki?
In http://qa.mandrakesoft.com/twiki/bin/view/Main/PackagingTask there
is a section where policy updates are being
Robert L Martin wrote:
After finially getting a copy (dl) of 9.1 i started poking around and
found the TV Drake ap.
Good that an ap is there bad that it does not see my Ati Radeon All In
Wonder 7500.
Does anybody know of documentation for how to get My tv tuner working ?
(modules.conf lines
On 2003-06-28(Sat) 09:42:48 -0400, Charles A Edwards wrote:
That,s not the output I get.
You might want build libtool-1.5 using the patches from the rh
libtool-1.5-3.src.rpm
( gc, do you have time to upgrade gettext and libtool packages? )
Charles, why don't you tell me earlier :)
I have
Does anybody know of documentation for how to get My tv tuner working ?
(modules.conf lines and what rpms i need)
You need ati.2 and avview from 9.1 contrib
Spence
---
And how about a few
Robert L Martin wrote:
Does anybody know of documentation for how to get My tv tuner working ?
(modules.conf lines and what rpms i need)
You need ati.2 and avview from 9.1 contrib
Spence
---
http://qa.mandrakesoft.com/show_bug.cgi?id=4123
--- Additional Comments From [EMAIL PROTECTED] 2003-29-06 00:15 ---
Created an attachment (id=524)
-- (http://qa.mandrakesoft.com/attachment.cgi?id=524action=view)
fixes Makefile Config.in
--
Configure bugmail:
Am Samstag, 28. Juni 2003, 13:28:14 Uhr MET, schrieb Stefan van der Eijk:
I guess everybody in this thread was trying to boot the kernel on an AMD
based machine. Is this correct?
No, it also doesn't run on my P4 with an i845PE chipset. I have
ordinary ext3 partitions.
--
What difference does
Le Vendredi 27 Juin 2003 19:58, andre a écrit :
On Friday 27 June 2003 15:04, Michael Scherer wrote:
I suggest another way : the clever trash ! (not yet patented ;-)
The trash already does exist. My idea is to improve it.
- Add a configuration file for the trash with :
a max size
http://qa.mandrakesoft.com/show_bug.cgi?id=4123
Product: kernel
Component: packaging
Summary: exaudio is not built since the move to
3rdparty(Makefile, Config.in mismatch)
Product: kernel
Version: 2.4.21-1mdk
http://qa.mandrakesoft.com/show_bug.cgi?id=4124
Product: aumix
Component: packaging
Summary: errors in menu file for aumix
Product: aumix
Version: 2.8-1mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
http://qa.mandrakesoft.com/show_bug.cgi?id=4123
--- Additional Comments From [EMAIL PROTECTED] 2003-29-06 00:28 ---
Created an attachment (id=525)
-- (http://qa.mandrakesoft.com/attachment.cgi?id=525action=view)
updated tar to exaudio-0.51
--
Configure bugmail:
Stefan van der Eijk wrote:
I guess everybody in this thread was trying to boot the kernel on an
AMD based machine. Is this correct?
Have people been able to boot this kernel? On which CPU?
I guess it's not the CPU. Perhaps the filesystem?
I'm on ext3 (/boot and /)
Stefan
Stefan
This
http://qa.mandrakesoft.com/show_bug.cgi?id=4125
Product: kernel
Component: kernel
Summary: several fixes from lkml
Product: kernel
Version: 2.4.21-1mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
http://qa.mandrakesoft.com/show_bug.cgi?id=4125
--- Additional Comments From [EMAIL PROTECTED] 2003-29-06 00:36 ---
Created an attachment (id=526)
-- (http://qa.mandrakesoft.com/attachment.cgi?id=526action=view)
changes the include path to the acpi code
--
Configure bugmail:
http://qa.mandrakesoft.com/show_bug.cgi?id=4125
--- Additional Comments From [EMAIL PROTECTED] 2003-29-06 00:37 ---
Created an attachment (id=527)
-- (http://qa.mandrakesoft.com/attachment.cgi?id=527action=view)
fixes sim710 build
--
Configure bugmail:
http://qa.mandrakesoft.com/show_bug.cgi?id=4125
--- Additional Comments From [EMAIL PROTECTED] 2003-29-06 00:37 ---
Created an attachment (id=528)
-- (http://qa.mandrakesoft.com/attachment.cgi?id=528action=view)
gcc3.3_fixes
--
Configure bugmail:
http://qa.mandrakesoft.com/show_bug.cgi?id=4125
--- Additional Comments From [EMAIL PROTECTED] 2003-29-06 00:38 ---
Created an attachment (id=529)
-- (http://qa.mandrakesoft.com/attachment.cgi?id=529action=view)
make raid5 quite with xfs
--
Configure bugmail:
http://qa.mandrakesoft.com/show_bug.cgi?id=4124
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
On Sat, Jun 28, 2003 at 08:50:14AM -0400, [EMAIL PROTECTED] wrote:
I see where you are going with this, but I don't understand why the wake
up sequence would not complete (that is my PCMCIA slot doesn't beep, and
the network interface doesn't come up). I would think that if XFree had
indeed
52 matches
Mail list logo