On Fri, 2002-09-06 at 23:27, Florent BERANGER wrote:
Bayonne is the telephony server of the GNU project. Based
...
http://www.gnu.org/directory/bayonne.html
--
bayonne-0.8.0-1mdk.i586.rpm
in contrib
=o=
kk1
I am just a French native, so please allow my lack of knowledge about
all you said before ;) I really did not think it would generate such a
traffic.
However, I carefully looked at my Harrap's and I cannot find to full
anywhere. I wish one could grep these things...
I tried the on-line
On Sat, 2002-09-07 at 10:30, Pixel wrote:
David Walluck [EMAIL PROTECTED] writes:
I use XFS for my root filesystem.
After the installation, mkinitrd fails, so that obviously the kernel fails to
mount the XFS root filesystem. Unfortunately I can't find any errors being
reported by
On Wed, 2002-09-11 at 09:56, Bjarne Thomsen wrote:
append=devfs=nomount in lilo.conf
stops the boot proces for ML9.0RC2.
Is this a bug, or are we not allowed
to use this option anymore?
It works with
append=devfs=mount
but it hangs on
append=failsafe devfs=nomount
Where does it
On Thu, 2002-09-12 at 15:48, Todd Lyons wrote:
Alan Shoemaker wrote on Thu, Sep 12, 2002 at 03:29:00PM -0700 :
mandrakeexpert incident 31636 forwarded to cooker.
Joel_Kraft : 11/09 08:21 : Incident created In Mandrake
Linux 8.2 my Num Lock key would turn on after boot.
In the 9.0
On Thu, 2002-09-12 at 16:46, Todd Lyons wrote:
Alan Shoemaker wrote on Thu, Sep 12, 2002 at 04:08:12PM -0700 :
mandrakeexpert incident 31717 forwarded to cooker.
hjndk : 12/09 02:56 : Incident created When I try to
burn the CD for installing the beta versions, it will burn
with no
On Thu, 2002-09-12 at 16:04, Alan Shoemaker wrote:
mandrakeexpert incident 31703 forwarded to cooker.
when replying, please cc this email address:
[EMAIL PROTECTED]
quoted text below
taupter : 12/09 12:00 : Incident created When I try to
open a mpeg movie with noatun,
On Thu, 2002-09-12 at 13:47, Alan Shoemaker wrote:
Todd Lyons wrote:
Daouda LO wrote on Thu, Sep 12, 2002 at 12:21:49PM +0200 :
Could you repost in english please ?
Daouda, that's the way it appears in the MandrakeExpert
site. Alan just copied and pasted it into the Cooker
On Thu, 2002-09-12 at 07:12, David Walser wrote:
Fresh installation.
You get green OKs during the boot, but then it's not
working, and service ypbind status shows:
ypbind dead but pid file exists
but if you just do service ypbind start
it works from then on out.
The only thing I can
On Thu, 2002-09-12 at 08:29, Stéphane Teletchéa wrote:
As i started a minimal system, my boot isn't configured to boot with the
wonderfull Mdk boot.
I checked in mcc, and select the Mdk theme or Ayo, but nothing changed.
Any packages missing ?
bootsplash and bootsplash-themes?
Apparently
please.
I promise it's the last time I try.
-o-
kk1
On Mon, 2002-09-16 at 21:12, David Walluck wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
John Rebecca wrote:
| Hello all.
|
| At the urging of Alan, I have subscribed to the cooker mailing list to
report
| bugs. So here goes... :)
|
| I have a problem with the mouse testing
--- Original Message ---
From: David Walser [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: Re: [Cooker] ypbind fails on boot
Has anyone looked into this? I did a bit...looking at
messages after booting, I see:
Sep 17 08:45:15 mccarthy ypbind: ypbind startup
succeeded
--- Original Message ---
From: Adrien Guichard [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] drakconf-9.0-2mdk and sandisk ...
Pixel [EMAIL PROTECTED] writes:
Adrien Guichard [EMAIL PROTECTED] writes:
[ . . . ]
The problem is that:
- there is no /dev/scd* device
Hi,
At boot time in no quiet mode, harddrake (I think this is this
service) blacks out the screen, then the service [OK] lines resume.
Using a suitable font, I could previously see on my screen the
whole boot process, now I have to pay attention to what happens
because the begining is wiped out
On Tue, 2002-09-17 at 15:42, Bill Shirley wrote:
However, on one of two systems I have running 9.0 rc2 linuxconf says:
Missing configuration file /etc/devsfsd.config for service devfsd.
The file is actually
/etc/devfsd.conf. Where can I fix this?
The path of the config files is set
On Mon, 2002-09-16 at 22:34, Ben Reser wrote:
On Tue, Sep 17, 2002 at 07:24:44AM +0200, Oden Eriksson wrote:
Hi.
I still see this:
[root@cooker RPMS]# rpm -Uvh kernel-2.4.19.12mdk-1-1mdk.i586.rpm
Preparing...### [100%]
--- Original Message ---
From: SillyZ [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Cooker] Missing RPMS
tetex-latex
tetex-1.0.7
Both of them are here, v1.0.7-60mdk
=-=
kk1
Hi,
At the begining of %prep, there are two 'cd /usr/src/RPM/BUILD'
=-=
kk1
On Sat, 2002-09-21 at 02:01, Henk Elbers wrote:
Hello,
gmumeric of 9.0rc3 crahses when you try to make it fullscreen. If not it
seems to ber working fine.
Maximizes fine here: 1600x1200, I can see up to W:55.
Using current cooker:
gnumeric-1.0.9-1mdk
kernel-2.4.19-16mdk
=o=
kk1
Well, the subject says it all, the machine freezes completely when I
turn my Lexmark Z51 USB printer on.
No mouse, no keyboard (both PS2), no remote access, nothing, the machine
is completely dead. This is new to me, I have done this several times
and never had any problem.
I cannot find
On Sat, 2002-09-21 at 15:33, Quel Qun wrote:
Well, the subject says it all, the machine freezes completely when I
turn my Lexmark Z51 USB printer on.
No mouse, no keyboard (both PS2), no remote access, nothing, the machine
is completely dead. This is new to me, I have done this several
On Sat, 2002-09-21 at 16:26, Quel Qun wrote:
On Sat, 2002-09-21 at 15:33, Quel Qun wrote:
Well, the subject says it all, the machine freezes completely when I
turn my Lexmark Z51 USB printer on.
No mouse, no keyboard (both PS2), no remote access, nothing, the machine
is completely
On Sun, 2002-09-22 at 07:47, Sandeep Khanna wrote:
Hi,
[root@sandeepk sandeepk]# mcc
gdk-pixbuf library is not available at /usr/lib/libDrakX/ugtk.pm line 762.
[root@sandeepk sandeepk]
libgdk-pixbuf2-0.18.0-3mdk
libgdk_pixbuf2.0_0-2.0.6-8mdk
2. rpmdrake
[root@sandeepk sandeepk]#
First of all, congratulations for this new release.
One thing I really appreciated was the smooth roll in of Gnome2. Really
impressive!
* improved bugzilla to have a easy mail interaction system, and a more
friendly interface. And to have a last known problems page.
I think the mailing
Hi,
The last three in the chapter 1 documentation are broken, namely
security_database.php, config_administration_tool.php and
config_catalog.php
Any idea where I could find them?
=o=
kk1
signature.asc
Description: This is a digitally signed message part
Hi,
everybuddy segfaults as soon as I try to add a new account.
Step to reproduce:
1. rm -f ~/.everybuddy
2. start everybuddy, it brings the account dialog.
3. add an account and click ok
4. segmentation fault.
In fact the account file only contains something like:
ACCOUNT Yahoo
/ACCOUNT
On Sun, 2002-09-29 at 22:49, Oden Eriksson wrote:
On måndagen den 30 september 2002 04.39 Quel Qun wrote:
Hi,
The last three in the chapter 1 documentation are broken, namely
security_database.php, config_administration_tool.php and
config_catalog.php
Any idea where I could find
On Sun, 2002-09-29 at 21:44, Forest C. Adcock wrote:
For some reason I can't change my default window manager under 9.0. In 8.2
all I had to do was edit my .xinitrc file to point to blackbox, but in 9.0 it
won't work. Any ideas? a bug maybe? or am I just overlooking something?
Looking
On Mon, 2002-09-30 at 15:02, Ben Reser wrote:
On Sun, Sep 29, 2002 at 07:54:42PM -0700, Quel Qun wrote:
everybuddy segfaults as soon as I try to add a new account.
Step to reproduce:
1. rm -f ~/.everybuddy
2. start everybuddy, it brings the account dialog.
3. add an account
to fix the problem before they
can use that nice little extra. (Of course, Ford has a bigger market share
than Mandrake, so the stink raised would be quite a bit larger.)
On Monday 30 September 2002 15:02, Ben Reser wrote:
On Sun, Sep 29, 2002 at 07:54:42PM -0700, Quel Qun wrote:
everybuddy
--- Original Message ---
From: Tim Stoop [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Cooker] Cervisia removed from 9.0?
Hi people,
I just did an update of my system (from 8.2 to 9.0, report is
being made), but
I noticed that Cervisia isn't in the install list? Why was it
removed from
On Thu, 2002-10-10 at 16:46, Maks Orlovich wrote:
On Thursday 10 October 2002 07:00 pm, Charles A Edwards wrote:
On Fri, 11 Oct 2002 00:45:39 +0200
Pierre [EMAIL PROTECTED] wrote:
What is the reason for this ?
They all have to be rebuilt for kde 3.1-0beta.
If that's neccessary,
Hi,
I tried to rebuild kdevelop to get rid of its dependency on
libkjava.so.1, but the build failed on:
grep: /usr/lib/libart_lgpl_2.la: No such file or directory
sed: can't read /usr/lib/libart_lgpl_2.la: No such file or directory
This file is in libart_lgpl2-devel, so this package ought to
On Sun, 2002-10-13 at 16:59, Damon Lynch wrote:
On Mon, 2002-10-14 at 12:46, Florent BERANGER wrote:
bash-2.05b$ gramps
Traceback (most recent call last):
File /usr/share/gramps/gramps.py, line 34, in ?
import gnome.ui
ImportError: No module named gnome.ui
$ sudo rpm -Uvh arts-1.1.0-0.beta2.3mdk.i586.rpm
libarts-1.1.0-0.beta2.3mdk.i586.rpm
error: failed dependencies:
libmad.so.0 is needed by arts-1.1.0-0.beta2.3mdk
libmad.so.0 is needed by libarts-1.1.0-0.beta2.3mdk
=o=
kk1
=-=
kk1
--- Original Message ---
From: Charles A Edwards [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] arts failed deps.
On Mon, 14 Oct 2002 14:27:27 -0500
Quel Qun [EMAIL PROTECTED] wrote:
error: failed dependencies:
libmad.so.0 is needed by arts-1.1.0-0.beta2.3mdk
--- Original Message ---
From: Brian J. Murrell [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Cooker] AA fonts in Galeon (Gecko) - how?
I upgraded my girlfriend's computer from 8.2 to 9.0 and noticed that
somehow or another, the text in her Galeon pages (i.e www.google.com
search results)
The list archives used to be accessible at
http://www.mandrake.com/en/archives/cooker/
However, the October page has not been created, and the messages
stop on the 10/10 on the September page.
Is this experience over? It was nice to have a nearly real-time
archiving.
=-=
kk1
Hi,
I am trying to add a menu enrty, but the Open in terminal is
always checked. I can uncheck it, but it always come back if I
save the menus.
=-=
kk1
Got apparently lost.
-Forwarded Message-
From: Quel Qun [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: [Cooker] missing BuildRequires in kdevelop
Date: 12 Oct 2002 17:51:06 -0700
On Fri, 2002-10-11 at 10:43, Quel Qun wrote:
Hi,
I tried
--- Original Message ---
From: Vincent Danen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] cooker archives on mandrake.com
On Monday, October 14, 2002, at 04:20 PM, Quel Qun wrote:
The list archives used to be accessible at
http://www.mandrake.com/en/archives/cooker
Hi,
Trying to install libgtk+-x11-2.0_0-devel:
$ rpmU libgtk+-x11-2.0_0-devel-2.0.6-8mdk.i586.rpm
error: failed dependencies:
libgdk_pixbuf2.0_0-devel = 2.0.6 is needed by
libgtk+-x11-2.0_0-devel-2.0.6-8mdk
libatk1.0-devel = 1.0.1 is needed by
libgtk+-x11-2.0_0-devel-2.0.6-8mdk
MySQL source is available here:
http://www.mysql.com/downloads/download.php?file=Downloads/MySQL-3.23/mysql-3.23.53.tar.gz
The rpm builds with the current spec file minus the 3rd patch.
I did not try anything with proftpd, but it is available here:
$ rpm -qa | grep libwmf
libwmf-fonts-0.2.5-3mdk
libwmf-0.2.7-1mdk
libwmf0.2_5-0.2.5-3mdk
libwmf0.2_7-0.2.7-1mdk
# rpm -e libwmf0.2_5
error: removing these packages would break dependencies:
libwmflite-0.2.so.5 is needed by libwmf0.2_7-0.2.7-1mdk
libwmflite-0.2.so.5 is needed
On Sun, 2002-10-20 at 16:02, Han Boetes wrote:
Quel Qun ([EMAIL PROTECTED]) wrote:
error: failed dependencies:
perl-base = 5.800 is needed by perl-Net-IRC-0.73-1kk1
perl five dot eight hundred. May take some time before that version is
released. Sam thing happened on other perl things
On Sun, 2002-10-20 at 20:18, Austin Acton wrote:
On Sun, 2002-10-20 at 23:02, Oden Eriksson wrote:
Hmm..., could you please try the new driver at D-Link, it addresses known Tx
timed out issues. in version 1.05c as of 2002/10/14 for DFE-580TX (the
sundance driver).
--- Original Message ---
From: rcc [EMAIL PROTECTED]
To: Cooker [EMAIL PROTECTED]
Subject: [Cooker] kernel 17mdk NVidia
the driver builds but when first used the whole machine crashes
and it crashes hard: no response at all, black screen, network
is dead,
no magic keys, all logs only contain
Hi,
I used to be able to shut the system down using the logout button on the
panel.
For about a week now, this only goes back to level 3 (I use startx to
start the gnome session).
=o=
kk1
signature.asc
Description: This is a digitally signed message part
On Thu, 2002-10-17 at 13:57, Nathan . wrote:
Hello All,
I'm not sure if this is the right place for me to post my problem. If not
then apologies and please direct me to appropriate mailing list. Ok now the
problem.
It is not, this list is for cooker, to prepare the next Mandrake
version,
On Thu, 2002-10-17 at 01:57, Warly wrote:
Quel Qun [EMAIL PROTECTED] writes:
MySQL source is available here:
http://www.mysql.com/downloads/download.php?file=Downloads/MySQL-3.23/mysql-3.23.53.tar.gz
The rpm builds with the current spec file minus the 3rd patch.
I will update
On Fri, 2002-10-25 at 13:27, Adam Williamson wrote:
On Fri, 2002-10-25 at 22:01, Quel Qun wrote:
Two different machines:
1. A Dell dimension with a TNT2. The machine boots but crashes as
above when I try to start X. Booting with the pci=noacpi option,
the machine runs fine.
2
On Fri, 2002-10-25 at 17:33, Gary Lawrence Murphy wrote:
Just to follow this, /boot/initrd-2.4.19-16mdk.img did exist with
the symlink to it.
After the kernel-2.4.19.17 update, /boot is only half-installed:
-rw-r--r--1 root root 512 Apr 13 2001 boot.0300
lrwxrwxrwx
$ rpm -q sendmail
sendmail-8.12.6-1mdk
$ sudo /etc/init.d/sendmail start
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
$ sudo /etc/init.d/sendmail stop
Shutting down sendmail:
$ rpm -q sendmail
sendmail-8.12.6-1mdk
$ sudo /etc/init.d/sendmail start
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
$ sudo /etc/init.d/sendmail stop
Shutting down sendmail:
On Tue, 2002-10-29 at 11:10, Mario Vazquez wrote:
When creating a simple C project from KDevelop Project -- New... I got
this error:
configure.in:101: error: m4_popdef: undefined macro: AC_Dest
autoconf/status.m4:844: AC_CONFIG_FILES is expanded from...
configure.in:101: the top level
On Tue, 2002-10-29 at 13:14, Juan Quintela wrote:
quel == Quel Qun [EMAIL PROTECTED] writes:
quel --- Original Message ---
quel From: rcc [EMAIL PROTECTED]
quel To: Cooker [EMAIL PROTECTED]
quel Subject: [Cooker] kernel 17mdk NVidia
...
quel It looks like the whole acpi thing
Hi,
The cooker version is one year old at 1.5.2. Here is a spec file
patch for the new version. I commented out the changed lines
instead of removing them, so the spec file could be cleaned up
after the mods are checked.
Description :
Xerces-C is a validating XML parser written in a portable
Hi,
Noticed there was a new version.
The main spec file modification is I left the utilities in their
original directory instead of moving them to %_bindir. Their path
is hard coded within the main application.
Just thinking now that a -2mdk could link them in %_bindir since
they are also
New version.
I left the spec file modified lines commented out so Warly can
see what I changed.
=-=
kk1
On Fri, 2002-11-01 at 07:44, Michal Bukovjan wrote:
Götz Waschk wrote:
Am Freitag, 1. November 2002, 07:32:08 Uhr MET, schrieb Charles A Edwards:
I can only give a half answer. Running enlightenment w/gnome-panel
the 'moon' button will close the gnome-panel. Won't log me out since
I'm
Hi,
I cannot create, forward nor reply to any message:
Could not create composer window: Unable to activate HTML editor
component. The error from the activation system is: Nothing
matched the requirements.
gtkhtml-1.1.5-1mdk, libgtkhtml1.1_3-1.1.5-1mdk
Rgds,
=o=
kk1
signature.asc
On Wed, 2002-11-06 at 08:22, Kim Schulz wrote:
hi
I havent used scp for a while but today I tried it and it just gave me
the following error:
scp: error in loading shared libraries: libcrypto.so.0.9.6: cannot open
shared object file: No such file or directory
lost connection
ssh works
Entered KDE bug #50318:
Version: 2.1.7 (using KDE Devel)
Installed from: Compiled sources
Compiler: surely gcc-3.2
OS: Linux
kdegames-3.1-0.rc2.2mdk, libqt3-3.1.0-0.beta2.3mdk, cooker version
After playing for few minutes, kmines segfaults when it is closed.
Backtrace:
0x41298699 in wait4 ()
Hi,
Just reporting it in case anyone uses IMAP. It does not work with
the new evolution-1.1.90-1mdk:
Error while 'Scanning folders in IMAP server my.imap.server':
Unexpected response from IMAP server: A1 BAD LSUB command
received in invalid state.
reporting it at Ximian too.
=o=
kk1
=-=
kk1
--- Original Message ---
From: Lonnie Borntreger [EMAIL PROTECTED]
To: Cooker List [EMAIL PROTECTED]
Subject: Re: [Cooker] evolution RC1 breaks IMAP
On Thu, 2002-11-07 at 12:29, Quel Qun wrote:
Error while 'Scanning folders in IMAP server my.imap.server':
Unexpected response from IMAP server
--- Original Message ---
From: Kim Schulz [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] scp gives error about not being able to
find libcrypto.so.9.6
[snip]
This is the cooker list, not the mdk9.0 list. No one can help
you here
since we: 1. don't know the version of your
--- Original Message ---
From: Pierrot Rey [EMAIL PROTECTED]
To: cooker [EMAIL PROTECTED]
Subject: Re: [Cooker] Open APM failed
...
I have checking with the kernel command line pci=3Dnoacpi and
it's good
now!!! Wat's the difference betwen APM and ACPI?
The FAQ on Intel's site gives some
libmpeg2.so.0 is needed by ImageMagick but the rpm containing it
(libmpeg2dec0) is not in Cooker.
If it is in contrib and necessary, it should be brought in.
=-=
kk1
Hi,
The gnome menu should be changed. It apparently tries to start
/usr/bin/gnome-theme-properties, when the new tool is
gnome-theme-manager.
Also, shouldn't there be an entry for it in the gnome-control-center?
=-=
kk1
On Wed, 2002-11-20 at 19:43, Han Boetes wrote:
Han Boetes ([EMAIL PROTECTED]) wrote:
zip
Yes that's a sort -f; I tested this rpm with ``kelk1'' on #mandrake and
he discovered that in his sort everything was sorted case-insensitive
while on my pc and mdk build-host everything was sorted
--- Original Message ---
From: Warly [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Cooker] Re: [Bug 555] Bugzilla mail will be forwarded
to cooker
Warly [EMAIL PROTECTED] writes:
[Bug 555] [EMAIL PROTECTED] writes:
https://qa.mandrakesoft.com/show_bug.cgi?id=555
--- Additional
--- Original Message ---
From: Buchan Milne [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] Problem with evolution
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
daniel beck wrote:
I have got a problem with evolution. I have full
cooker on my pc, and evolution 1.2.0-3 mdk.
I
/alternatives/| grep cp
cpp - /usr/bin/cpp-3.2*
lib_cpp - /usr/bin/cpp-3.2*
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
, Archive Generator, Floppy Format,
Hexadecimal Editor.
^^
Hmm, I don't think so. ghex is only in contrib.
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
about is yet. Keep Ben's rpm on plf and let the
guys who are getting their steak from their work decide what is safe for
themselves.
Even the US Feds failed to rein the beast, so please...
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
Somehow, this rpm got lost. Only libbonoboui-2.1.0-1mdk.i586.rpm is
available.
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
This package is missing from the main distribution.
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
It just does not start. The process hangs somewhere and has to be
terminated manually.
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
:(
I managed until now to avoid anything dealing with nautilus, but here I
am stuck.
I realize these are only libs, but is this dependency really needed?
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
On Sun, 2002-12-01 at 05:55, Götz Waschk wrote:
Am Freitag, 29. November 2002, 17:23:40 Uhr MET, schrieb Quel Qun:
I managed until now to avoid anything dealing with nautilus, but here I
am stuck.
I realize these are only libs, but is this dependency really needed?
Galeon 1.3.0 again
the person who closed it was wrong...
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
do it anymore. There is surely somewhere a
file permission that has changed. I still can use X by starting gdm as
root and login as a user from there.
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
On Mon, 2002-12-02 at 00:49, Frederic Crozat wrote:
On Sun, 01 Dec 2002 17:36:38 +, Quel Qun wrote:
On Sun, 2002-12-01 at 05:55, G=F6tz Waschk wrote:
Am Freitag, 29. November 2002, 17:23:40 Uhr MET, schrieb Quel Qun:
I managed until now to avoid anything dealing with nautilus
Hi,
This may not be specific to Mandrake, but after using
gnome-terminal for a while, I cannot navigate in vi with the
arrow keys anymore.
This morning for example I modified my crontab with crontab -e
and several hours later, I only get a bell if I try using the
arrow keys doing the same.
Same
--- Original Message ---
From: Brian J. Murrell [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Cooker] Re: vi in gnome-term loses arrow keys
On Mon, Dec 02, 2002 at 02:59:48PM -0500, Quel Qun wrote:
Hi,
This may not be specific to Mandrake, but after using
gnome-terminal for a while, I
Finally, I am not sure, as I say, that it is a Mandrake bug. I am
even quite sure it is a gnome-terminal problem, so the report has
nothing to do in Mandrake's database.
Here you go:
http://bugzilla.gnome.org/show_bug.cgi?id=96364
So just turn num-lock off to get the arrow keys back. That
On Mon, 2002-12-02 at 01:48, Quel Qun wrote:
On Mon, 2002-12-02 at 00:52, Frederic Crozat wrote:
On Sat, 30 Nov 2002 21:03:25 +, John Johnson wrote:
After upgrading to the latest cooker version of gnome2 (as of 1700 EST),
Gnome no longer starts. Using startx, X starts
are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--
Steve
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
and it is a bad idea to mix the two!!
The problem is, I know the module is compiled by GCC 3.2, because I did
it myself!?!?
how can i fix this?
Same problem with the aureal sound driver(s).
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
Version 2.1.0 was released on Aug 26, 2002. Any good reason not
to use it?
=-=
kk1
--- Original Message ---
From: Rolf Pedersen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] Re: modutils
Buchan Milne wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Juan Quintela wrote:
marcel == Marcel Pol [EMAIL PROTECTED] writes:
marcel Hello,
marcel I uploaded
Hi,
This is a more recent version than the alpha5 currently in contrib.
Group : System/Libraries Source RPM: (none)
Size: 542818 License: BSD
URL : http://www.hpl.hp.com/personal/Hans_Boehm/gc/
Summary : Conservative garbage
that no screen found too.
Somehow, I cannot use 1600x1200 with a color depth of 24 as before. It
says that the 32 megs of memory aren't enough. I had to lower the depth
to 16 to be able to use that resolution.
It was working fine with the previous version.
GeForce2 Integrated GPU
--
Quel Qun
On Thu, 2002-12-12 at 20:54, Leon Brooks wrote:
On Friday 13 December 2002 08:56 am, Quel Qun wrote:
Somehow, I cannot use 1600x1200 with a color depth of 24 as before. It
says that the 32 megs of memory aren't enough. I had to lower the depth
to 16 to be able to use that resolution
for maximum performance, and
an interpeter. It can also be used to run programs from the .NET
Framework.
Description :
Gtk# is a C# language binding for the gtk+ toolkit.
I guess everything should be broken in libs and such, but it's a start.
--
Quel Qun [EMAIL PROTECTED]
signature.asc
libgnomedb-0.9.0-1mdk.src.rpm transfer was aborted. Please use
libgnomedb-0.9.0-1mdk.src.rpm.valid
Thanks,
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
* Sat Dec 14 2002 Quel Qun [EMAIL PROTECTED] 1.1.3-1mdk
- New version.
- Removed Patch0: merged upstream.
- Regenerated Patch1.
Thanks,
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
is
---
gnome-panel: relocation error /usr/lib/libgen_util_applet-2.so:
undefined symbol: wnck_tasklist_set_icon_loader
---
which appears several times.
libwnck-2.1.5-1mdk ?
--
Quel Qun [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
On Sun, 2002-12-15 at 10:28, Thorsten Hirsch wrote:
Quel Qun schrieb:
libwnck-2.1.5-1mdk ?
Yeah, the panel is working now! Seems like I've updated the libwnck-1_4,
but forgot to install version 2.1!
Thanx!
You should really follow dependencies:
$ rpm -q --requires libwnck-1_4 | grep
1 - 100 of 851 matches
Mail list logo
