Borsenkow Andrej [EMAIL PROTECTED] writes:
these nodes are created automatically when lircd modules are
loaded. You have to modify devfsd configuration (/etc/modules.devfs)
to let devfsd load needed modules on access to /dev/lirc*
i would prefer lirc package to come with
Aleksander Adamowski [EMAIL PROTECTED] writes:
RC1 has serious problems with drakconf (those GTK errors),
those serious problems were just warnings generated by gdk-pixbuf
initialization.
David Walser [EMAIL PROTECTED] writes:
It won't let you use a BuildArch line in a specific
package's section in the spec file?
no. very, very old problem...
John Johnson [EMAIL PROTECTED] writes:
Upgraded to dev-3.3.1-10mdk and MAKEDEV-3.3.1-10mdk. Now at bootup,
the system complains that the mount point /dev/pts does not
exist. Running mdk_makedev doesn't correct the problem. What is
required to create /dev/pts.
/dev/{shm,pts} 're created in
Gary Lawrence Murphy [EMAIL PROTECTED] writes:
An interesting problem with es1371 in RC1: If I use sndconfig,
it correctly identifies and activates the sound, but the
initscripts do not automatically enable the sound system.
T send the output of the commands lspcidrake -v, fgrep
Danny Tholen [EMAIL PROTECTED] writes:
Seems that Thierry screwed up:)
He did not package the new versions of wine-config.pl and
wine-launcher.sh.
i used what you give me
Thierry, if you do not have my original files anymore, I attached
above files + a spec with some small fixes I had to
Combelles, Christophe (MED, ALTEN) [EMAIL PROTECTED] writes:
There is also a typo availlable in this file.
just fixed both
Chris Picton [EMAIL PROTECTED] writes:
Does harddrake2 pick up ISA pnp devices?
no
Stéphane Teletchéa [EMAIL PROTECTED] writes:
alias char-major-81 bttv
pre-install bttv modprobe -k tuner ; modprobe -k msp3400
options i2c verbose=1 scan=1 i2c_debug=0
options bttv card=1
options tuner debug=0 type=3
you can configure your tv card while installing mandrake in summary
huug [EMAIL PROTECTED] writes:
I got wine.tar.bz2 as an attachment. (?)
The old beta of Gnus titi was using had some problems with mime
handling.
yep :-(
Alan Shoemaker [EMAIL PROTECTED] writes:
No etherape package in MDK9.0 anymore?
still there in contribs ...
Henrik Nordhus [EMAIL PROTECTED] writes:
I patched /etc/rc.d/init.d/sound to run emu10k1-ctl if the file
exists. Probably you'd only want to run if the emu10k1 module was
loaded, but I assumed theonly reason you'd install this package is
if you actually ahd this card.
hum, this patch
Combelles, Christophe (MED, ALTEN) [EMAIL PROTECTED] writes:
succesfully -- successfully
just comitted.
thanks
Reinhard Katzmann [EMAIL PROTECTED] writes:
When I try to configure them using harddrake it says
unknown module:
unknown : Philips Semiconductors|SAA7134 [MULTIMEDIA_OTHER] (vendor:1131
device:7134 subv:153b subd:1142)
unknown : Philips Semiconductors|SAA7146
Brad Felmey [EMAIL PROTECTED] writes:
I'd like to start sending the output of lspcidrake -v for each
system I have that has [unknown] hardware so that it can be entered
in the proper place (ldetect-lst?). To whom shall I send them?
be careful. there's different kind of unknown hw:
- know
Danny Tholen [EMAIL PROTECTED] writes:
In fact, the installer has a bug. It does not let you choose your
sound
That is a missing feature, not a bug. Before draksound there was not
the ability to switch. now there is, maybe next installer will have
it 2.
well, i can alter (once we
Stefan Hußfeldt [EMAIL PROTECTED] writes:
the ISA soundcard Creative ViBRA16C PnP hasn't been detected,
we don't probe for isa pnp cards since it has freeze some boxes in the
past.
isapnptools not installed.
urpmi isapnptools
Alan Shoemaker [EMAIL PROTECTED] writes:
mandrakeexpert incident 31551 forwarded to cooker.
quoted text below
lsilv104 : 11/09 01:25 : Incident created
I have installed the rc2 realize of mandrake 9.0, everething looks
ok but my video cam doesn't work, the hardrake detect's but as
huug [EMAIL PROTECTED] writes:
upgrade to mkbootdisk-1.4.5-3mdk and syslinux-1.76-2mdk and see
the bootdisk creation problem fixed.
#8[rpms :0]# mcc
Subroutine _ redefined at /usr/sbin/drakfloppy line 44.
Name main::in used only once: possible typo at /usr/sbin/drakfloppy line 60.
Alan Shoemaker [EMAIL PROTECTED] writes:
mandrakeexpert incident 31501 forwarded to cooker.
quoted text below
knekos : 10/09 12:58 : Incident created
RC2: I noticed some notice that MDK 9.0 will autodetect and
automount new devices automatickly. This feature doesn't work for
USB
Florent BERANGER [EMAIL PROTECTED] writes:
PS : part of lspcidrake -v output about speedtouch usb modem
unknown : Alcatel|USB ADSL Modem (Speed Touch)
[]
no class ?
(vendor:06b9 device:4061)
rpm -qa 'ldetect*' ?
Reinhard Katzmann [EMAIL PROTECTED] writes:
dvb would be the correct one:
ok, they're in latest ldetect-lst
Brent Hasty [EMAIL PROTECTED] writes:
In MDK controll center, under hardware, There are a few things not
detected fully or properly on my system
under bridges:
amd-768 pci to pci bridge
vendor-amd
bus-pci
bus identification-1022:7448
location on the
Stefan Hußfeldt [EMAIL PROTECTED] writes:
we don't probe for isa pnp cards since it has freeze some boxes in
the past.
Hmm, i can't confirm that. We've used Mandrake with a lot of
different hardware since 1999 and no freezes with pnp
hardwaredetection.
it does on *some* boxes
if some
Florent BERANGER [EMAIL PROTECTED] writes:
no class ?
It was visible in previous version (it was cool to see all
peripherals).
of lspcidrake ?
if output has changed, could you send us the output with both old and
new lspcidrake ?
Tibor Pittich [EMAIL PROTECTED] writes:
if i click at Console icon in System menu it exec xterm and
after cca. 2 secs crash this xterm window, and drakconf going into
freeze..
rpm -qa 'drakconf rxvt' ?
cat ~/.i18n ?
SpamKill [EMAIL PROTECTED] writes:
/sbin/service: line 148: 3140 Terminated $debug
$servicedir/$service $options
and doesn't allow a restart
i'll fix
Florent BERANGER [EMAIL PROTECTED] writes:
I didn't saw WinTV USB WinTV USB PVR cards in usbtable
(ldetect-lst).
Is anyone who have one can send the output of lspcidrake
-v command to this ml ?
the usbtable don't have to list all devices the same way pcitables
does since for most devices,
Alastair Scott [EMAIL PROTECTED] writes:
When the Report Bug menu item in harddrake2 is selected, a file ./1
(zero bytes, permissions 644) is written if harddrake2 is invoked
from the command line (harddrakeui-1.1.9-50mdk).
this is a drakbug bug (:-) )
i can reproduct it... i'll look at it
Thierry Vignaud [EMAIL PROTECTED] writes:
When the Report Bug menu item in harddrake2 is selected, a file ./1
(zero bytes, permissions 644) is written if harddrake2 is invoked
from the command line (harddrakeui-1.1.9-50mdk).
this is a drakbug bug (:-) )
i can reproduct it... i'll look
John Allen [EMAIL PROTECTED] writes:
The file contains
#\!/bin/sh\nexec /usr/bin/mcc
And is also now executable
thanks, fixed (sh needs passing -e to echo unlike full bash)
Stéphane Teletchéa [EMAIL PROTECTED] writes:
Seen in /var/log/messages :devfsd[1238] unknown group :video;
defaulting to GID=0
just a warning (that should have not made up of course), pam'll put
right permissions on login
David Walser [EMAIL PROTECTED] writes:
thanks, fixed (sh needs passing -e to echo unlike full bash)
?
[djw9202@mccarthy djw9202]$ sh
[djw9202@mccarthy djw9202]$ echo \n
\n
[djw9202@mccarthy djw9202]$ echo -e \n
[djw9202@mccarthy djw9202]$ exit
[djw9202@mccarthy djw9202]$ bash
Felix Miata [EMAIL PROTECTED] writes:
the boot disk creation failure problem that began with the first
beta I tried and lasted into even RC3.
if that happens if you've a tv card, gc fixed that bug last week (was
my fault :-( ), it was a very weird side effect of a use standalone
in
David Walser [EMAIL PROTECTED] writes:
I'm still not seeing a difference between sh and bash.
well, i'm right in theory whereas you're right in practive :
sysv sh does expand backslash-escaped characters by default (aka
without -e) which simplified bash (aka /bin/sh) should have follow.
but
Bill Codington [EMAIL PROTECTED] writes:
Tried: Run config tool, selected both Microtek 636 and X6EL. Neither
would work. XSane gave a no devices available error. Kooka
simply showed no scanner selection.
scannerdrake does now detect scsi scanners but don't configure them
since it don't
Brian Craft [EMAIL PROTECTED] writes:
H...when I run draksound (as root) it shows the snd-cs46xx
driver as the one in use, but the drop down list doesn't give me the
choice to pick the cs46xx.
uh ? what's in the menu then ? you wouldn't have a menu if there were
nothing but an error
birrachiara [EMAIL PROTECTED] writes:
As of man-1.5k-2mdk, makewathis creates his indexes into
/var/cache/man/$LANG, but apropos (and whatis) searchs only into
/var/cache/man ...
yes, this is the new makewhatis behaviour. i wanted this for cron
entries. eg:
tv@vador ~ $ cat
Ben Reser [EMAIL PROTECTED] writes:
soundconfig is redhat's configuration tool and isn't really
supported by Mandrake. Use draksound.
it's useless to answer such mails if there's no author emails since
the odds're high such people don't read cooker.
too sad.
Sandeep Khanna [EMAIL PROTECTED] writes:
[root@sandeepk sandeepk]# mcc
gdk-pixbuf library is not available at /usr/lib/libDrakX/ugtk.pm line 762.
[root@sandeepk sandeepk]
libgdk-pixbuf2-0.18.0-3mdk
libgdk_pixbuf2.0_0-2.0.6-8mdk
he meant you should install libgdk-pixbuf2 though
Damon Lynch [EMAIL PROTECTED] writes:
Do you see the pattern as above? drakfont is dying on the 3rd font
it tries to process hopefully that kind of info will give them a
head start to solving the bug..
it isn't dead, it's just stucked in a blocking syscall.
the question now is why
Berg M. van den [EMAIL PROTECTED] writes:
If soundconfig isn't really supported by Mandrake, than remove it
from the distribution.
it's yet useful for plain old isa sound cards which happylly disapear
one per one from the earth
Bill Codington [EMAIL PROTECTED] writes:
sane-find-scanner gives:
sane-find-scanner: found SCSI scanner scanner 636EL 1.50 at device
/dev/sg0
If I try to configure the scanner for drakconf-hardware it apears to
work but doesn't. I still get no devices available from Xsane.
just use
Felix Miata [EMAIL PROTECTED] writes:
What is draksound for? Why isn't the mandrake installer referring to
it instead of sndconfig?
because draksound and sndconfig have different goals :
- draksound only offer to switch between alsa and oss for pci and usb
sound cards
- sndconfig is usefull
Ben Reser [EMAIL PROTECTED] writes:
Yes and no. It's possible these people will search a cooker archive
for the issue. Or that other people will search the archive and not
ask the same question. So while it may not help the particular
person asking the question right away. It may help
Alan Shoemaker [EMAIL PROTECTED] writes:
the audio card (model es1868) doesn't work and doesn't appear in the
control panel.There was no problem with previous versions (7.x and
8.x).
the ensonique 1868 (as well as the 1869 one and the 1879 one) is an
isa sound card.
neither drakx nor
Oden Eriksson [EMAIL PROTECTED] writes:
I hope this is a mistake...
rpm -Uvh --force \
ftp://ftp.sunet.se/pub/os/Linux/distributions/mandrake/9.0/i586/Mandrake/RPMS/mandrake-release-9.0-0.3mdk.i586.rpm
the iso have mandrake-release-9.0-1mdk :-)
Gary Lawrence Murphy [EMAIL PROTECTED] writes:
- A 'gripe' button that will compose a message to send
to cooker-bugs while also capturing essential system
information (kind of like the old windows dr watson.
drakbug let you post a bug report to bugzilla
Gerard Patel [EMAIL PROTECTED] writes:
I got the impression that some developers were reluctant to use the
mailing list; for example, I posted a message about net_monitor, got
invited to post code, did it, got absolutely no answer, reposted in
case the code had been lost, in vain, gave up,
Buchan Milne [EMAIL PROTECTED] writes:
And, there also need to be people who use the software in question
daily. As an example (not to dis Fred), I don't think Fred Crozat
uses Mozilla mail, but he is the packager. I do use mozilla-mail
daily (and have about 30 people, increasing daily,
[EMAIL PROTECTED] (Robert Fox) writes:
Could someone officially state when Cooker gets out of freeze.
we'll begin by taking a few holydays days.
then we'll debrief what has been better or worse in the 9.0 than for
the 8.2 and how to improve for the next release.
only then cooker will be
[EMAIL PROTECTED] (Robert Fox) writes:
only then cooker will be re-opened.
Not a problem - just wanted to request that someone from Mandrake
inform this list officially when it IS re-opened!
well, that will depend of how fast (or slow) can our brain compare
mdk8.2 to mdk9.0 :-)
Frederic Crozat [EMAIL PROTECTED] writes:
Problem is I (and some other Mdk people) use our internal news2ml
gateway to access all MandrakeSoft mailing list. Therefore, if
people cc me, I'll see the message in both my newsreader and my
mailreader..
add on
hance the beauty of the integration
Mario Vazquez [EMAIL PROTECTED] writes:
I now contribs are unsupported and more if they come from beta
software:
better ask [EMAIL PROTECTED]
Yura Gusev [EMAIL PROTECTED] writes:
Mandrake people did a very good job. Each one in MandrakeSoft
deserves big ice-cream ;-)
you're welcome in paris then :-)
Reinout van Schouwen [EMAIL PROTECTED] writes:
From a translator perspective, I'd like to comment that the
continuing string changes in the Mandrake tools sometimes are
driving me up the wall. Up until this weekend there have been string
changes without the translators even being notified in
Frederic Crozat [EMAIL PROTECTED] writes:
Well, Ben Reser confirmed there was no problem with 2.4.19-3mdk
kernel, so this is a ALSA bug..
Titi ? :))
install alsamixergui and swich off every item until your noise
disappear
Daouda LO [EMAIL PROTECTED] writes:
It was slovenian locale and i answer that it was not reproductible
on my machine using locale-sl with localedrake (same with nl
locale). It seems that the bug shows when install is done with
these locales (will test as soon as i find a new fan for my test
Yura Gusev [EMAIL PROTECTED] writes:
after that only two errors left. Maybe Drakconf author can fix this
when he will have some time?
all're fixed in cvs.
thanks
Ben Reser [EMAIL PROTECTED] writes:
Actually 3mdk was fine. 5mdk was not. So I think 4mdk was where the
bug was introduced. But I don't have 4mdk here so I can't test it.
this means alsa rc3 introduced the bug.
via686 driver has changed much since in cvs (i asked alsa team to
merge it with
Wim Horst [EMAIL PROTECTED] writes:
1) drakconf did not start, it complaint about line 423 in
/usr/sbin/drakconf, i removed this line and it worked, think its a
localisation problem, because english install doesnt have this
problem.
this patch fix that bug:
Index: control-center
Michal Bukovjan [EMAIL PROTECTED] writes:
Maybe. But initscripts report (when loading alsa drivers) version
0.9rc2 and:
because libs tools are rc2
Adam Williamson [EMAIL PROTECTED] writes:
Do we have rc3 drivers and rc2 libs?
exactely
Florent BERANGER[EMAIL PROTECTED] writes:
My videocard bus is listed as PCI.
I know that the Linux kernel display AGP cards as PCI but I have see
on many configs that AGP cards name contains AGP word - must be
listed as AGP.
must ? very cosmetic afaic
maybe
I don't see infos about the
Jason [EMAIL PROTECTED] writes:
[root@diggy jason]# fgrep sound /etc/modules.conf
alias sound-slot-0 ymfpci
[root@diggy jason]#
Hope this helps!! Any ideas?
lsmod |fgrep ymf
aumix -q
/sbin/fuser -v /dev/dsp
H. Narfi Stefansson [EMAIL PROTECTED] writes:
Wed Oct 2 21:40:41 2002 Gtk-LOG **: file gtkstatusbar.c: line 233
(gtk_statusbar_pop): assertion `context_id 0' failed. at
/usr/lib/libDrakX/harddrake/ui.pm line 223.
and that was the only response I received.
you can safely ignore that
Victor [EMAIL PROTECTED] writes:
I solved the problem by copying my fonts to a folder on a fat32
partition. Drakfont ran fine after that.
but kernel's ntfs.o remains buggy :-(
I started tweaking the gnome2 font settings and now I can't even
start gnome anymore. I changed the font defaults
brent sirna [EMAIL PROTECTED] writes:
Hi all,
On the weekend I just tried switching from my motherboard's
audio(ac97) to my sound blaster live value card. And it would seem
that on power up Mandrake isn't auto detecting any new hardware. Is
this correct ?
it only offer to reconfigure
David Walser [EMAIL PROTECTED] writes:
Cool. Does this mean Cooker is unfrozen now?
yep
J.A. Magallon [EMAIL PROTECTED] writes:
At the end of the tread, you will find this patch for top.c, I
posted it there and WorksForMe(TM) (while awating the author
includes a fix in next package)
applied but i'm considering switching to the debian procps instead
Biagio Lucini [EMAIL PROTECTED] writes:
Seriously, you have given a partial view of what ext3 is. There are
serious reasons to choose it in my view, among which:
a) back compatibility with ext2 (conversion to and fro on the fly and
possibility of mounting clean ext3 partitions as ext2)
b)
Per ?yvind Karlsen [EMAIL PROTECTED] writes:
ReiserFS is still not to be trusted..
reiserfs can write up to 30 seconds after a program do some writing,
so if something happens before the end of these 30 seconds (power
outrage, hard lock, disk disconnection, reset, ...), all the
metadata'll be
Aleksander Adamowski [EMAIL PROTECTED] writes:
ReiserFS people have an excellent vision of next-gen plugin-based
filesystem, but it turns out it's not quite ready yet.*
a reiserfs4 snapshot is expected soon for linux-2.5.x.
as for production usage, you can wait ...
When (if) it becomes
Han Boetes [EMAIL PROTECTED] writes:
% ls /usr/bin/env
ls: /usr/bin/env: No such file or directory
% urpmf /usr/bin/env
fixed in 2mdk
Vox [EMAIL PROTECTED] writes:
[root@isis bin]# ls -l env
lrwxrwxrwx1 root root 13 Oct 11 17:20 env - ../../bin/env
[root@isis bin]# cd ../../bin
[root@isis bin]# ls -l env
ls: env: No such file or directory
already fixed in 2mdk
gabor [EMAIL PROTECTED] writes:
i'm sure install -s worked a week before
will be fixed in 3mdk
Allen H. Ibara [EMAIL PROTECTED] writes:
The man-pages-1.53-1mdk SRPM doesn't build because
it depends on '~/bin/makewhatis' which doesn't exist.
thanks. just fixed
J.A. Magallon [EMAIL PROTECTED] writes:
See reasons here:
http://marc.theaimsgroup.com/?l=linux-kernelm=103373399704425w=2
nptl only works with kernel-2.5.x where x 3x (and second release
need at last 2.5.4x)
Wesley J Landaker [EMAIL PROTECTED] writes:
Just noticed, env is missing from *all* of my cooker machines.
alread fixed in 2mdk
Florent BERANGER [EMAIL PROTECTED] writes:
In 9.0 betas, we can see an other category (with speedtouch modem, for
exemple).
This category isn't displayed in final, is there a way to see again all
hardware in harddrake ?
it still there. as any other category, it's only displayed if
Levi Ramsey [EMAIL PROTECTED] writes:
(btw RH's i386 compiled kernels won't run on a real i386 ... only i486
hum IIRC they are made for 386-DX (with a math coprocessor), did
yours have one? if you run a 386-SX you don't have one.
pedantic mode on:
the 386DX did not have a math
Charles A Edwards [EMAIL PROTECTED] writes:
39:pw
##
/var/tmp/rpm-tmp.68107: line 3: a: command not found
error: execution of %postun scriptlet from pw-3.5.2-2mdk failed, exit
status 127
???.
will be fixed in 2mdk
Leon Brooks [EMAIL PROTECTED] writes:
tune2fs -j /dev/hdaX
i would do this only in single mode after having fully checked the fs
with fsck to be sure to rely on journal protection for new operations
whereas some errors were still there in the fs.
David Walser [EMAIL PROTECTED] writes:
- fix midi playing (Sylvain Vignaud)
What exactly did you have to change?
--- timidity.cfg.old2002-10-12 22:59:09.0 +0200
+++ timidity.cfg2002-10-12 22:57:48.0 +0200
@@ -67,7 +67,7 @@
# Note that midia.cfg sources
J.A. Magallon [EMAIL PROTECTED] writes:
Oh, I know, I'm not worried about NPTL, I just thougth if the bug
fixes were of general interest...
you've to lobby-fye gwenole then
Charles A Edwards [EMAIL PROTECTED] writes:
[charles@localhost sylpheed-claws]$ su
bash: /bin/su: No such file or directory
[charles@localhost sylpheed-claws]$ /usr/bin/su
Password:
[root@localhost sylpheed-claws]#
fixed in next release
Blindauer Emmanuel [EMAIL PROTECTED] writes:
I'm missing a lot of entries in the menu, like help or other
entries. is it related to libforms1 rc ?
i don't lack any entry with either mdk9.0 or current cooker
Leon Brooks [EMAIL PROTECTED] writes:
also, the 486sx (at least the first ones) did has a
coprocessor; it was disabled but was still there (though i
don't rember if it was missing pins or some silicon hack).
actually, it was a bad bit of circuit if I remember correctly,
the
Leon Brooks [EMAIL PROTECTED] writes:
The command adds the journal to the filesystem as a hidden file
without bringing it on line. I've done this on countless systems
live without problems.
the point is that if you enable journaling on a journal that *may*
have already errors, since you will
Han Boetes [EMAIL PROTECTED] writes:
[charles@localhost charles]$ su
bash: /usr//bin/su: No such file or directory
[charles@localhost charles]$ /bin/su
Password:
[root@localhost charles]#
Why don't you have /bin in your $PATH? Or do I miss something?
he updated coreutils during that
Aaron Peromsik [EMAIL PROTECTED] writes:
I'll start with one issue meanwhile: it was around RC3 when I noticed
that secure IMAP didn't work with Gnus enymore. Yesterday I finally
tracked it down: secure IMAP requires ssl.el, which is part of the
emacs-w3 package. It seems that emacs-w3 and
Charles A Edwards [EMAIL PROTECTED] writes:
3:shorewall
##
/var/tmp/rpm-tmp.63400: line 1: /usr/sbin/shorewall: No such file or
directory
already fixed
Charles A Edwards [EMAIL PROTECTED] writes:
Still a problem.
[charles@localhost charles]$ su
bash: /usr//bin/su: No such file or directory
[charles@localhost charles]$ /bin/su
Password:
[root@localhost charles]#
you've no root password or other weird thing
tv@vador ~ $ rpm -q
Charles A Edwards [EMAIL PROTECTED] writes:
On Tue, 15 Oct 2002 14:33:49 +0200
Thierry Vignaud [EMAIL PROTECTED] wrote:
already fixed
Not in -2
you see the error message from desinstallation of *1*mdk package ...
Philip Webb [EMAIL PROTECTED] writes:
i happily use pstree for a quick check of processes
it resides in /usr/bin (upgrade 8.2 - 9.0rc1),
but i can't find psmisc via MCC Software Packages Install/Remove:
psutils has a number of 'ps-' utilities, but doesn't include pstree
. is psmisc
Franco Silvestro [EMAIL PROTECTED] writes:
may be U know thatonly for info.
during current cooker urpmi -v --auto-select
[...]
45:pw ##
/var/tmp/rpm-tmp.23602: line 3: a: command not found
error: execution of
gabor [EMAIL PROTECTED] writes:
the newest version on alsa-project.org is rc4
which is buggy so the cvs is already rc5 that should go out soon
do i have to simply compile the cooker sources, or i have to rebuild
the whole kernel?
whole kernel
i just have access to a machine with ida and was able to fix devfsd
for ida devices (compaq smart array).
i would like to provide devfs support for cciss devices too.
does someone has such pet ?
Han Boetes [EMAIL PROTECTED] writes:
So I rebooted single user and then su - han and:
14:53Han| /etc/init.d/mandrake_consmap:17: perminsion denied: /proc/567/fd/0
14:54Han| that file is chmod 644
14:57Han| check
Yup. A chmod 744 /etc/init.d/mandrake_consmap fixed
Lonnie Borntreger [EMAIL PROTECTED] writes:
Does anyone know why I see all sorts of special ESC characters on my
screen when trying to view a manpage?
-man cvs
ESC[1mNAMEESC[0m
cvs - Concurrent Versions System
ESC[1mSYNOPSISESC[0m
ESC[1mcvs ESC[22m[ ESC[4mcvs_optionsESC[24m
1 - 100 of 1362 matches
Mail list logo
