During Starting up the partitioner..
Scanning disks...
I get the message
Warning!
Device /dev/scsi/host2/bus0/target0/lun0/disc has logical sector size
of 2048. Not all parts of GNU parted support this at the moment, and
the working code is highly experimental.
That message
reassign 420382 partman-base
thanks
On Sunday 22 April 2007 08:14, Christian Perrier wrote:
During Starting up the partitioner..
Scanning disks...
I get the message
Warning!
Device /dev/scsi/host2/bus0/target0/lun0/disc has logical sector
size of 2048. Not all parts of GNU
Processing commands for [EMAIL PROTECTED]:
reassign 420382 partman-base
Bug#420382: installation-reports: Install hangs when 30GB ipod connected via USB
Bug reassigned from package `installation-reports' to `partman-base'.
thanks
Stopping processing here.
Please contact me if you need
I've attached the syslog after adding set -x to
/lib/partman/definitions.sh, as requested.
The reason I suggest adding it to the workarounds is because it is not
obvious that it is the ipod that is causing the hang. It took me a
few hours to figure out that /dev/scsi/host2 was actually my ipod,
this time I've actually attached it.
-Andrew
On 4/22/07, Andrew Chant [EMAIL PROTECTED] wrote:
I've attached the syslog after adding set -x to
/lib/partman/definitions.sh, as requested.
The reason I suggest adding it to the workarounds is because it is not
obvious that it is the ipod that is
Package: installation-reports
Boot method: CD
Image version:
http://ftp.sunet.se/pub/Linux/distributions/debian-cd/3.1_r5/sparc/iso-cd/debian-31r5-sparc-netinst.iso
Date: 21-22.4.2007
Machine: Sun SparcStation 20
Processor: SuperSparc
Memory: 128M
Partitions: part1 ext2, part2 linux swap
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.10.1
tags 420254 moreinfo
Bug#420254: Partman does not show partition table
There were no tags set.
Bug#420255: Partman does not use free space to create partition
Tags added: moreinfo
On Sunday 22 April 2007 11:07, Baron of Hell wrote:
Image version:
http://ftp.sunet.se/pub/Linux/distributions/debian-cd/3.1_r5/sparc/iso-
cd/debian-31r5-sparc-netinst.iso
Comments/Problems:
Problems:
Machine hanging some loop when it try start installer.
I get only blank screen and text
On Sunday 22 April 2007 09:18, Andrew Chant wrote:
I've attached the syslog after adding set -x to
/lib/partman/definitions.sh, as requested.
Thank you for the log. It shows the warning being displayed, but not what
happens after that.
I've done some testing of my own, simulating the error
reopen 420162
reassign preseed
thanks mate
fyi type=warning
this posting contains many shoulds
/fyi
Op 20-04-2007 om 20:51 schreef Debian Bug Tracking System:
preseed/run runs a shell command. If you want to wget a shell script,
chmod +x it, and run it, you have to write shell commands to do
Processing commands for [EMAIL PROTECTED]:
reopen 420162
Bug#420162: debian-installer don't load preseed/run script
Bug reopened, originator not changed.
reassign preseed
Unknown command or malformed arguments to command.
thanks mate
Unknown command or malformed arguments to command.
fyi
Op 21-04-2007 om 12:56 schreef Petter Reinholdtsen:
During installation, and afterwards, there are a few things that could
be improved regarding hardware detection. Here are some ideas I have
on the topic.
This comment is only on one idea.
Third, some hardware is supported by kernel
Processing commands for [EMAIL PROTECTED]:
# Op 22-04-2007 om 09:57 schreef Debian Bug Tracking System:
# Processing commands for [EMAIL PROTECTED]:
#
# reopen 420162
# Bug#420162: debian-installer don't load preseed/run script
# Bug reopened, originator not changed.
#
# reassign
Your message dated Sun, 22 Apr 2007 18:47:35 +0200
with message-id [EMAIL PROTECTED]
and subject line Bug#420162 done: d-i does load and run preseed/run script
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not
package: installation-reports
version: 4.0r0
I'm trying to install Etch and everything goes fine until it tries to
configure taskselduring installation of the base system. It gets
to configuring tasksel and never finishes. This happens with
the net-install, the business-card installer and the
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.10.3
reopen 420162
Bug#420162: debian-installer don't load preseed/run script
Bug reopened, originator not changed.
End of message, stopping processing here.
Please contact me if you
I've attached the new log. I think you found the problem -
close_dialog is not returning.
BTW the file was /lib/partman/ not /var/lib/partman/..., I hope..
What happens is after I get the previously-described message, I can
click continue or go back from that message. Regardless of which
I
[Geert Stappers]
That automatic build of driver source into kernel module,
how automatic will that be?
What will the effect on the boot time?
Not sure. I see two options, to make sure the kernel modules are
still available:
- compile the source with the new kernel when the new kernel is
Op 16-04-2007 om 21:52 schreef Michael S Peek:
Stephen Frazier wrote:
It would appear that Michael Peek works in an environment like mine.
Both windows and Debian machines on the same network. The DHCP server
belongs to the windows support people and they don't know how to set
it up for
Hello! Thanks for subscribing.
Here's information about
that was given by the list owner:
Private Policy:
You might want to save this email for future reference.
You can unsubscribe anytime from by following this link:
Op 20-04-2007 om 13:04 schreef Michael S. Peek:
The organization where I work, a college campus, has a DHCP server that
will assign all unknown hosts a 10.x.x.x address and route all traffic
from a 10.x.x.x address to their machine registration page. This is a
convenience for students and
Unsubscription from list:
is successful.
If you would like to subscribe to
in the future, just click this link:
http://www.vivicatania.net/cgi-bin/lista/mojo.cgi?f=nl=%7cid%7c[EMAIL
PROTECTED]p=8238
-
--
Il messaggio e' stato analizzato alla ricerca di virus o
Package: installation-reports
Boot method: CD
Image version: JIGDO
http://cdimage.debian.org/debian-cd/4.0_r0/i386/jigdo-cd/debian-40r0-i386-CD-1.jigdo
Date: 22 APR 2007, 2200
Machine: Dell Inspiron E1505
Processor: Intel Centrio Core Duo, 1.8ghz
Memory: 1GB
Partitions: /dev/sda4 ext3
I used the Debian Etch CD 1 from the CD set.
I have also tried with the netinstall-CD using
the mirror ftp.fi.debian.org and another
mirror in Finland but the result is same.
I also tried the main Debian server and
the result is same. It only retrieves a
smaller number of packages and when it
24 matches
Mail list logo
