reopen 328480
forwarded 328480 axiom-developer@nongnu.org
thanks
Greetings, and thanks so much for your feedback!
Colin Turner [EMAIL PROTECTED] writes:
Hi Camm,
Camm Maguire wrote:
Greetings!
OK, just double checked with the latest 20050901-7, and I cannot
reproduce. I think this
On Nov 01, Roland Stigge [EMAIL PROTECTED] wrote:
attached you will find a patch that modifies update-inetd to use debconf
for interaction (and therefore non-interaction if non-interactive, with
reasonable defaults).
This patch changes the semantic of the program, which currently asks the
user
Hello Brendan,
On Wed, Nov 01, 2006 at 10:17:51PM +1100, Brendan O'Dea wrote:
I am embarrassed to report that there was an earlier German translation
from Sven Joachim languishing in the BTS for debsums that I had not got
around to applying.
Uups, I must have missed it, usually I check the BTS
Package: guile-pg
Version: 0.16-3
Severity: normal
This package has a build dependency on the obsolete package postgresql-dev.
Please change that to libpq-dev.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Greg Norris wrote:
I just checked this using version 1:4.3p2-5.1 from sid, and it appears
to be working as expected.
[EMAIL PROTECTED] tail -2 /etc/hosts.deny
ALL EXCEPT sshd: PARANOID
sshd: 127.0.0.1
[EMAIL PROTECTED] ssh
Hi Peter,
Versions of packages snmpd depends on:
ii adduser 3.87 Add and remove users and groups
This could be Bug#372599 again. Could you upgrade adduser first and retry the
upgrade?
Thanks,
Jochen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
On Wed, Oct 25, 2006 at 08:55:45AM +0200, Stefano Melchior wrote:
tags 395020 + pending
thanks
Dear all,
you can find the suggested modification to the manual page in the svn
alioth repos.
SteX
--
Stefano Melchior, GPG key = D52DF829 - [EMAIL PROTECTED]
http://www.openlabs.it/~stex--
package pwc-source
found 350061 10.0.12-rc1+final-1
thanks
Hi,
the pwc.ko module is installed in /lib/modules/(`uname
-r`)/kernel/drivers/usb/media/pwc.ko again and therefore the upstream
kernel module will be loaded instead.
Cheers, Mario
--
.''`. Mario Joußen [EMAIL PROTECTED]
: :' :
Package: libdbi-drivers
Version: 0.7.1-3.1
Severity: normal
This package has a build dependency on the obsolete package postgresql-dev.
Please change that to libpq-dev.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
tags 298048 moreinfo unreproducible
thanks
hi,
using kweather 2.1.0 (KDE 3.5.5), i have added kweather applet and opened
configuration dialog. Then, i selected kweatherservice and added my stations.
If you have selected multiple stations, in the configuration dialog-Display,
choose the one
On Wed, Nov 01, 2006 at 03:21:20PM +0100, KELEMEN Peter wrote:
* Radovan Garabik ([EMAIL PROTECTED]) [20061101 15:06]:
Could you run these commands and send me the output?
% stat -f /afs
File: /afs
ID: 631234 Namelen: 256 Type: UNKNOWN (0x0)
Block size: 4117466368
Package: libnet-xwhois-perl
Version: 0.90-1
Severity: normal
The man page refers to example programs such as a whois client, but
these don't seem to be in the package. Please include them.
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.4.27-2-686
Locale:
Package: libnss-pgsql
Version: 1.3.1
Severity: normal
This package has a build dependency on the obsolete package postgresql-dev.
Please change that to libpq-dev.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello,
2006 m. spalis 27 d., penktadienis 12:05, Daniel Huhardeaux rašė:
- open a text file with konqueror and print it with kdeprint: it's ok
- open a pdf file and print it with kdeprint: it's ok
- open an OpenOffice odt file and print it: it's ok
- open an OpenOffice *odg* file and print
Package: guichan
Version: 0.4.0-4.1
Severity: normal
Tags: patch
Attached is the diff for the 0.4.0-4.1 NMU I uploaded.
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable'), (50, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to
On Wednesday 01 November 2006 11:05 am, Sam Hocevar wrote:
Both the missing X and GL dependencies were bugs in libsdl1.2-dev
that are now fixed in 1.2.11-7.
That should fix at least 90% of the build failures, and the remaining corner
cases (e.g. not Build-Depending on libasound2-dev, as in
Package: beaglefs
Version: 1.0.3-1
Severity: normal
Tags: patch
Hello,
I wrote a man page for beaglefs (actually, most of the documentation was
already written in the readme files ;)
It should solve lintian's beaglefs binary: binary-without-manpage
Franklin
-- System Information:
Debian
Hey penny,
Our office is willing to negotiate.
www.basiter.com/16r
Get in touch with my company for a 2.72% reduction.
Best Regards,
Willard Wayne
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
At Wed, 1 Nov 2006 02:17:11 -0800,
Steve Langasek wrote:
I have the same problem: cups does not work any longer with my Epson C82
USB printer. Here is what I see in /var/log/cups/error_log:
Er, how can you claim you have the same problem when your logs are totally
different?
E
Package: backupninja
Version: 0.9.4-3
Severity: grave
Info: starting action 15.pgsql (because of --now)
Debug: yes
Info: Using vserver 'db'.
Debug: Examining vserver 'db'.
Debug: chown 0
1
2
3
4
5
6
7
8
9
10
11
12
14
25
27
32
33
42
90
99
1000
Package: udev
Version: 0.100-2.2
Severity: wishlist
Tags: patch l10n
Please find the file attached.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Hello Christian,
on request by Jens (sorry, only in german) I took over the
translation. It has been reviewed on the german translator list.
Greetings
Helge
On Sun, Oct 29, 2006 at 11:39:27PM +0100, Jens Nachtigall wrote:
hat jemand lust, das paket für mich zu übernehmen?
On Wednesday 01 November 2006 09:40, Braun Gabor wrote:
Package: katomic
Version: 4:3.5.5-1
Severity: normal
*** Please type your report below this line ***
After an upgrade, the following happened:
1) High score table cleared.
2) While solving a level katomic is supposed to show two
Package: libmm14
Version: 1.4.0-1
Severity: wishlist
The current stable upstream release of libmm is 1.4.2. The changes since
1.4.0 shouldn't have any notable implications for the Debian package,
AFAIK.
-Neil
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
A last problem with this bug remains:
When /etc/init.d/libnss-ldap is executed (i.e. started) the
root-filesystem is still mounted read-only.
Thus, the 'touch' command fails. We have solved this issue by adding:
mount -n -o remount,rw /
before the 'touch' and
mount -n -o remount,ro /
Package: mdadm
Version: 2.5.4-1
Severity: important
Owner: [EMAIL PROTECTED]
Tags: patch
- Forwarded message from Dan Pascu [EMAIL PROTECTED] -
[...]
The second patch fixes a more serious problem. If the system boots with a
degraded array, it locks in the booting process forever. I
severity 396527 important
thanks
Bumping severity on this; it doesn't make msmtp unusable for everyone, but
it does for me. I use msmtp to send mail over TLS for a work address, and
exim4 to send and receive local mail. Removing one or the other is not
workable for me.
--
Daniel Jacobowitz
Hi,
md wrote:
attached you will find a patch that modifies update-inetd to use debconf
for interaction (and therefore non-interaction if non-interactive, with
reasonable defaults).
This patch changes the semantic of the program, which currently asks the
user every time there is a conflict.
Package: libgcj-common
Version: 1:4.1.1-19
Severity: minor
libgcj-common installs a symlink from /usr/share/doc/libgcj-common to
/usr/share/doc/gcj-4.1-base, which makes checksums mismatch:
# aptitude reinstall libgcj-common
[...]
# debsums -s
debsums: checksum mismatch gcj-4.1-base file
Hello,
On Tue, Oct 31, 2006 at 05:45:34PM +0100, martin f krafft wrote:
Package: unison
Version: 2.13.16-5
Severity: wishlist
If I use -auto but at the prompt say
n No: go through selections again
I think it would make sense to then prompt for each item
Package: libgphoto2-2
Version: 2.2.1-9
Severity: wishlist
Tags: patch
A friend of mine bought a Canon EOS 400D (after selling me his old
350D), and was surprised to see it not supported by libgphoto2. I
googled for the USB ids, and came up with the following patch.
Apparently the 400D doesn't
Package: dctrl-tools
Version: 2.9.2
Severity: wishlist
Tags: l10n, patch
Russian program translation is attached.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel:
On Wednesday 18 October 2006 11:43, Loïc Minier wrote:
On Wed, Oct 18, 2006, Frederik Dannemare wrote:
Sorry for not being very active over the course of the summer (new
job and everything). I am, however, prepared to pick up speed again
and I was wondering if it would be okay to upload
Christian, this answers both of your questions below: No, my file should
not override Claus'. I was not aware that Claus had submitted an update.
Regards,
Morten
Christian Perrier [EMAIL PROTECTED] wrote:
Quoting Morten Bo Johansen ([EMAIL PROTECTED]):
An updated da.po for Aptitude is
Here's the backtrace of trying to do the same tulip action within an
xnest environment.
Program received signal SIGSEGV, Segmentation fault.
0x08157738 in _mesa_shareContext ()
(gdb) bt
#0 0x08157738 in _mesa_shareContext ()
#1 0x0810995a in GlxInitVisuals ()
#2 0x081089c4 in GlxInitVisuals ()
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
By the by, these are production systems. Just install X from sid is
not really a viable option. :)
- --
Rob Munsch
Solutions For Progress IT
www.solutionsforprogress.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Using
Josip Rodin wrote:
I think he needs a card that actually works with the new drivers :-) We're
really not sure what to do, given the decision by ATI to drop 8500 support.
Damn. Well, I might have a go at it standalone if no one else is willing,
if there is a modicum of documentationabout the
Hum ... this problem is due to the exclusion of the mysql DBD driver
(http://apache.webthing.com/svn/apache/apr/apr_dbd_mysql.c) from
the aprutil library because of licensing issue. (Cf INSTALL.MySQL
in the source package ...)
Maybe this bug should be forwarded to the libapr team ...
--
OK then, if you have tested it feel free to NMU.
--
ciao,
Marco
signature.asc
Description: Digital signature
Modestas Vainius a écrit :
Hello,
2006 m. spalis 27 d., penktadienis 12:05, Daniel Huhardeaux rašė:
- open a text file with konqueror and print it with kdeprint: it's ok
- open a pdf file and print it with kdeprint: it's ok
- open an OpenOffice odt file and print it: it's ok
- open an
tags 395915 -unreproducible
tags 395915 +patch
Martin Dickopp [EMAIL PROTECTED] wrote:
When I tried to build the package in a pbuilder (sid) environment on my
amd64 machine, I noticed that the build scripts attempted to run the
swig command. Adding swig to the Build-Depends and rebuilding
The cause of the segfault was that some .desktop file were corrupted;
reinstalled the packages and now all is ok.
The program should not segfault in first place ;-) however it would be helful
to print to screen the file it is working on (with tve -v flag, maybe) and
that causes problems: to
Package: libgengameng-dev
Version: 4.1-7
Severity: grave
/usr/lib/libgengameng.la references the following libraries:
/usr/lib/libSDL.la
/usr/lib/libasound.la
/usr/lib/libartsc.la
/usr/lib/libgmodule-2.0.la
-ldl
/usr/lib/libgthread-2.0.la
Randall Donald a écrit :
On Mon, 2006-10-30 at 16:19 -0500, Philippe Cloutier wrote:
Sure.
This bug should normally be closed, as nvidia-graphics-modules-i386 is
no longer in testing and therefore nvidia-graphics-modules-i386 can't
FTBFS in testing anymore. However, when
tags 396558 pending
thanks
Quoting Damyan Ivanov ([EMAIL PROTECTED]):
Package: exim4
Version: 4.63-8
Severity: wishlist
Tags: patch l10n
Hi,
Please find attached a patch to exim4_debian_po_bg.po that completes the
Bulgarian translation.
Commitov
signature.asc
Description: Digital
Package: phpmyadmin
Version: 4:2.9.0.2-1
Severity: important
see topic
-- System Information:
Debian Release: testing/unstable
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages
Le mercredi 01 novembre 2006 14:33, [EMAIL PROTECTED] a écrit :
Package: libaudacious-dev
Version: 1.1.2-2
Severity: normal
pkg-config needs audacious.pc for most of the plugins. I think this
package is the right place for it.
Off course it is. Sorry for the mistake.
Thanks for packaging
Package: apt
Version: 0.6.46.2
Followup-For: Bug #317186
hi
after I discussed bug http://bugs.debian.org/396346
I decided to prepare a FAQ on using pinning for mplayer;
but I found that the preferences
v
Package: mplayer
Pin: release o=Unofficial Multimedia Packages
Pin-Priority:
Hi Brandon, Jean,
I will sponsor libmtp. Brandon's package seems a good beginning.
Jean, are you still interested in the package? and in co-maintain it?
Ana
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: mediawiki1.7
Version: 1.7.1-3
Severity: important
I installed mediawiki1.7 via apt-get install.
When continuing with administration via browser frontend i got the following
error message:
(http://127.0.0.1/mediawiki/config/index.php)
[..]
# Environment checked. You can install
I applied the patch in:
http://projetos.ossystems.com.br/debpartial-mirror/changeset/754
Could you check if that's the solution that you proposed?
Yes that's it, but perhaps 1 level too much indentation?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
user [EMAIL PROTECTED]
usertag 392230 + intend-to-nmu
usertag 395216 + intend-to-nmu
usertag 395218 + intend-to-nmu
usertag 393554 + intend-to-nmu
thanks
hey,
As these bugs have been open with a patch for over a week without a
rejection from the maintainer (and etch is quickly approaching), I
Package: apt-rpm
Severity: wishlist
Version: 0.5.15lorg3.2-1
Hi,
I'm packaging mach, a tool to create chroots of RPM based
distributions. It has two modes of operation, APT and Yum. APT is the
preferred mode, and Yum support is currently not fully possible for
other reasons.
Package: konqueror
Version: 4:3.5.5a-2
Severity: normal
The following two sites rendered correctly with KDE 3.5.4, but with 3.5.5
they render the body of the site in a frame that is the correct width, but
far too short at the top of the page:
www.bankofannarbor.com
www.nbc.com
Reported
Hi,
I had no problem with bacula 1.38.11-1 and 5.0.24a since 2 weeks.
If I sum up :
Works correctly during 2 weeks :
- bacula 1.38.11-1 and mysql 5.0.22-4
- bacula 1.38.11-1 and mysql 5.0.24a
Fails after few days :
- bacula 1.38.11-5 and mysql 5.0.22-4
- bacula 1.38.11-5 and mysql 5.0.24a
On Sun, Oct 01, 2006 at 06:24:18PM +0200, Falk Hueffner wrote:
Package: quodlibet-plugins
Version: 20060823-1
Severity: normal
I sometimes see stuff like:
[...]
Sending song: Art Brut - Formed a Band
Submission status: OK
Plugin re-enabled - accepting new songs.
Sending song: Art Brut
Hi Pawel, Daniel,
Haven't seen an upload for giflib 3 yet ... would you two mind if I went
ahead and uploaded the proposed 3.0-12.1 NMU? Or should I wait a bit
longer?
best regards,
--
Kevin B. McCarty [EMAIL PROTECTED] Physics Department
WWW: http://www.princeton.edu/~kmccarty/
John Halton [EMAIL PROTECTED] writes:
Package: celestia
Version: 1.3.2-4
Severity: grave
Celestia crashes on start-up. This applies whether I start from the
Gnome menus or from command line, and whether I use celestia,
celestia-gnome or celestia-glut as the command.
Sorry, I can't
On Wed, Nov 01, 2006 at 11:32:28AM +0100, Robert Millan wrote:
Package: linux-2.6
Severity: wishlist
Tags: patch
Please could you include BadRAM patch ? I missed it *a lot* when my RAM blew
up and I couldn't boot the system from disk or d-i CD because they all hang.
:)
Package: openssh-server
Followup-For: Bug #395535
I've tried reproducing this with two versions (p2-3 and p2-5) of the
openssh-server package,
and the example provided by Greg Morris works fine with both versions.
However, the original poster reported this not working (i.e. the connection was
Package: exim4
Version: N/A
Severity: wishlist
Tags: l10n patch
Please find attached a gzipped .po file containing updates to the Bosnian
templates translation of the exim4 package.
exim4_debian_po_bs.po.gz
Description: application/gzip
Hi,
This is a followup for Debian bug http://bugs.debian.org/359161.
On Mon, Mar 27, 2006, Taco IJsselmuiden wrote:
When trying to install a rpm-database in some dir using rpm --root, the
wrong dbpath is used for locking the transaction, which of course makes
the whole transaction
Package: tuxguitar
Version: 0.8-2
tuxguitar should not directly depend upon libswt-gtk-3.2-jni, since it
depends on libswt-gtk-3.2-java, which depends on a specific version of
libswt-gtk-3.2-jni.
Cheers,
Shaun
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Package: wodim
Version: 5:1.0~pre4-1.1
Severity: normal
...aptitude upgrade snip:
(Reading database ... 94838 files and directories currently installed.)
Unpacking wodim (from .../wodim_5%3a1.0~pre4-1.1_i386.deb) ...
dpkg: error processing /var/cache/apt/archives/wodim_5%3a1.0~pre4-1.1_i386.deb
Package: cgiirc
Version: 0.5.9
Severity: normal
Working on a non-debian installation (aavso), entering /away always triggers
the response You are no longer set as away, including the first time.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
On Wed, 2006-11-01 at 10:30 +0100, Bart Martens wrote:
Could you evaluate the flashplugin-nonfree package in experimental
regarding bug 387263 please? Feel free to post your comments on the bug
report.
The package in experimental looks much better in this regard, thanks for
all your work. :)
Package: hostname
Version: 2.92
Severity: minor
Just installed the package and saw it reports the wrong version number.
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.18.1
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of
And now add user-mode-linux also.
[EMAIL PROTECTED]:~ $ dpkg -l | grep sysvinit
ii sysvinit 2.86.ds1-34
System-V-like init utilities
ii sysvinit-utils2.86.ds1-34
System-V-like utilities
23:17:15
Aurélien GÉRÔME wrote:
A new upstream release of subtitleeditor is out [1]. Please consider
packaging it. Thanks.
Yes, I have already done so, but:
Date: Sun, 29 Oct 2006 11:33:28 -0800
From: Debian Installer [EMAIL PROTECTED]
To: Amaya Rodrigo Sastre [EMAIL PROTECTED]
Package: daemontools-installer
Version:
Tags: l10n, patch
Severity: wishlist
Portuguese (pt) translation for daemontools-installer's debconf messages
by Rui Branco ruipb _at_ debianpt.org.
Feel free to use it.
For translation updated please contact Rui Branco and CC the Portuguese
translation
Package: apache2-common
Version: 2.0.55-4.1
Severity: normal
Can't upgrade to apache2.2
Stopping apache 2.0 web server... failed!
invoke-rc.d: initscript apache2, action stop failed.
dpkg: error processing apache2-common (--remove):
subprocess pre-removal script returned error exit status 1
密?要保存好。 bsp
http://koso.co.kr pw5
密?：ok dbf
http://koso.co.kr/dhcp y69
Hello Luk,
you are right.
Luk Claes a écrit :
Your package recommends wims-extra which is unavailable in unstable.
Please Raphael, may you sponsor the package ? it is described at
http://debian.ofset.org/dists/etch/main/source/wims-extra_3.58-1.dsc
Best regards, Georges.
Package: hostname
Version: 2.92
Severity: important
It seems hostname -i ignores the order bind,hosts line in
/etc/host.conf and returns always the IP on /etc/hosts if there is one.
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.18.1
Locale: [EMAIL
package: util-vserver
version: 0.30.211-1
Hi,
vserver-build.fai included in util-vserver only works with a development
branch of fai, but not with the fai from trunk or the one in debian.
I know it's an upstream issue but it should at least be documented.
regards,
Holger
On
Kevin B. McCarty wrote:
Haven't seen an upload for giflib 3 yet ... would you two mind if I went
ahead and uploaded the proposed 3.0-12.1 NMU? Or should I wait a bit
longer?
Well, since giflib 3.x does not have any depends, I'll replace it with
giflib 4.x (but I needed to get confirmation
Package: gnat-4.1
Version: 4.1.1-16
Severity: important
(Unfortunately, the program on which the error occurs can not be
published)
I'm getting the following error message:
$ gnatlink /path/to/file.ali
Exception name: CONSTRAINT_ERROR
Message: gnatlink.adb:1731 range check failed
gnatlink:
Alternatively, you could read the logs from the Apache conf files directly.
--
Olaf van der Spek
http://xccu.sf.net/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I had to edit apache2-common.prerm by hand and change:
invoke-rc.d apache2 stop || exit $?
to
invoke-rc.d apache2 stop
Actually, I had to comment the whole file.
--
GNU/Linux registered user #224950
Proud Egyptian GNU/Linux User Group www.eglug.org Member.
Life powered by Debian, Homepage:
Package: gtk2-engines-gtk-qt
Version: 1:0.7-1
Severity: wishlist
Hi,
Currently a user can save desktop space by utilizing the Mac OS X like
menu bar as a panel for many application buttons/applets. This way a user
can use a single bar for both, application buttons/applets and application
menus.
On Sun, Oct 22, 2006 at 01:11:34PM +0200, Mau wrote:
Package: irda-utils
Version: 0.9.18-3
Severity: important
As you can see in the following 'Debconf information' for my smsc-ircc2
the ali-ircc module is chosen: this results in a
/etc/modprobe.d/irda-utils like this:
[snip]
options
package:gaim
severity:normal
right now gaim and gaim-dev use a == dependency on gaim-data.
because gaim and gaim-dev are arch any while gaim-data is arch all when a new
version of gaim is uploaded gaim becomes temporally uninstallable on most
architectures. This causes a LOT of buildd
Package: wnpp
Severity: wishlist
Owner: Loic Minier [EMAIL PROTECTED]
* Package name: mach
Version : 0.9.0.2
Upstream Authors : Thomas Vander Stichele,
Ville Skyttä,
Jeff Pitman,
Rudi Chiarito,
Package: xserver-xorg
Version: 1:7.1.0-5
Severity: normal
The package xserver-xorg has a circular dependency with
xserver-xorg-core. The package does nothing for me and will only do
something once anyway (generate an X config). Would you consider moving
the only file in this package to
Package: wnpp
Severity: normal
This program is no longer maintained upstream; it has been abandoned and
replaced by HDCaml[1]. I'm no longer interested in maintaining a package for
confluence, so this is up for adoption. I will probably orphan this if
nobody adopts it within a few months.
[1] I
Package: wnpp
Severity: wishlist
Owner: Jan Wagner [EMAIL PROTECTED]
* Package name: dns-flood-detector
Version : 1.12
Upstream Author : Dennis Opacki [EMAIL PROTECTED]
* URL : http://www.adotout.com/
* License : GPL 2
Programming Lang: C
Description :
Package: bash
Version: 2.05b-26
Severity: normal
bash 2.05b-26 does not document the 'SHELL' environment variable that is
automatically set by bash.
I went through the man page and the docs in bash-doc and could find no
references to this environment variable.
It appears to be automatically set
Max Alekseyev wrote:
retitle 388794 upstream version 8.30.3 is available
thanks
You should have opened a different bug. Please do not retitle bugs you
don't own.
Apart from that, thanks for the heads up.
--
Ciao, Flavio
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Package: emacs21
Version: 21.4a+1-1
Severity: normal
After the last upgrade of emacs21 in testing, and as on several
previous occasions, I couldn't quit my running Emacs because of an
invalid bytecode error. I presume there's some generic underlying
problem here (bytecode file versioning?) which
It is packaged at mentors.debian.org and is pending for upload
Thanks,
Ilya
On Wed, 2006-11-01 at 19:22 +0100, Michael Ablassmeier wrote:
Package: ysm
Severity: grave
Version: 2.9.8-1.1
hi,
as it stands ysm is useless due to protocol changes. Upstream has fixed
this issue with 2.9.9:
Package: webalizer-stonesteps
Version: 2.4.1.2-1
Severity: wishlist
Hi Tamas,
I'm forwarding your request to the BTS: I likely lack the time
to deal with it properly the near future. This way, at least
it won't get lost.
I've snipped a comment from your mail. This does _not_ mean I don't
Hi mike monroe,
Improved Ejaculations
Greater Orgasms
Greater Fertility
www.primjemagic.com
Try it right now
Thanks Alot,
Nigel Jefferson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: webcalendar
Version: 1.0.4-1.2
Severity: wishlist
Tags: patch l10n
Please find the file attached.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to
Here is a small patch for metablog
Oliver Ripka
patches@@bockcay.de
For Programm: gnome-blog
For Version: 0.9.1-3 with debian patches
Debian-Url: http://packages.debian.org/unstable/gnome/gnome-blog
Url: http://www.gnome.org/~seth/gnome-blog/
Original Author: Seth Nickell
This adds category
On Tuesday 31 October 2006 14:28, Michael Biebl wrote:
Arnout Boelens wrote:
Or wrote down the wrong filename ;-). Actually, when I do a suspend to disk
/var/log/suspend2disk.log is not even created. Also, neither suspend to ram
nor
disk is working with kpowersave. Maybe there is
On Sunday 29 October 2006 18:51, Tim Cutts wrote:
On 28 Oct 2006, at 10:59 pm, Ulrich Eckhardt wrote:
Package: am-utils
Version: 6.1.5-2
Severity: wishlist
Greetings!
I'm currently looking for something that mounts CDs automatically
and came
across the am-utils package. I
Hi Ritesh,
I think what you ask for is a KDK-apps specific feature and
gtk-qt-engines can't influence the position of the menubar directly. As
far as I know it only translates the drawing commands of gtk into qt's
native widgets.
But I've forwarded your wish to the upstream maintainer, just in
merge 396600 385450
thanks
Hi,
On Wed, 2006-11-01 at 13:37 -0500, Norbert Veber wrote:
Package: spamassassin
Version: 3.1.4-1
Severity: wishlist
http://www.nabble.com/ANNOUNCE%3A-Apache-SpamAssassin-3.1.7-available!-tf2415849.html
Already reported as #385450; merging.
Regards,
Adam
--
Package: wnpp
Severity: normal
I rarely, if ever, use this program anymore, and I have had little
motivation to work on it lately, being busy with other free software
projects. I am probably not the best maintainer for it at this point.
If anyone is interested, this is up for adoption.
-- System
tags 393554 + patch
thanks
On Wed, Nov 01, 2006 at 03:23:59PM -0500, Eric Dorland wrote:
You may have tagged it patch, but I don't see a patch anywhere.
oops! Sorry Eric - here it is:
--- openct-0.6.9/src/ifd/utils.c~ 2006-09-12 17:23:07.0 -0600
+++ openct-0.6.9/src/ifd/utils.c
701 - 800 of 934 matches
Mail list logo
