Bug#949943: fuzzyocr depends on gifinter from libgif-tools, unavailable

2020-01-27 Thread Chris Bell
Package: fuzzyocr Version: 3.6.0-12 Severity: normal Tags: upstream Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? Causes spamassassin errors, crashes sa-exim on dedicated mail gateway * What exactly did you

Bug#781538: debian-boot: Total trash on reboot of RAID1 partitions

2015-03-30 Thread Chris Bell
Package: debian-boot Version: jessie rc1 Severity: critical Justification: breaks the whole system Dear Maintainer, * What led up to the situation? / was installed on first RAID1 pair of partitions, 2nd RAID1 pair not used at first, /srv on 3rd RAID1 pair. I had a problem during

Bug#745819: zoneminder experimental

2014-12-09 Thread Chris Bell
-- Chris Bell www.chrisbell.org.uk Date: Mon, 8 Dec 2014 17:54:13 + (GMT) From: Chris Bell chrisb...@chrisbell.org.uk Subject: zoneminder experimental To: vagr...@debian.org Cc: p...@northern-ridge.com.au I am not a competent programmer, but have been trying to figure out why

Bug#758096: Blends in D-I tasksel selection? (Was: Filed Bug#758096: tasksel: Allow to select specific packages during installation - just DE, Web server, Mail server is NOT enough)

2014-11-11 Thread Chris Bell
among the tasks listed by aptitude? -- Chris Bell www.chrisbell.org.uk Microsoft sells you Windows ... Linux gives you the whole house. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#740410: installation-reports

2014-03-01 Thread Chris Bell
. There used to be a frequent problem with hardware that could not use DMA. -- Chris Bell www.chrisbell.org.uk -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#596598: xorg: (Intel 82852/855GM) Total machine hang as x starts, leaving blank screen

2010-09-12 Thread Chris Bell
Package: xorg Version: 1:7.5+6 Severity: important This machine is normally updated frequently using aptitude. Machine has often hung after a regular kernel upgrade, but the usual temporary cure using a previous kernel did not work this time so I did a total re-installation. Still suffers a

Bug#587388: d-i: fails to install grub-2

2010-06-28 Thread Chris Bell
' failed. Full logs available if required. -- Chris Bell www.chrisbell.org.uk (was www.overview.demon.co.uk) Microsoft sells you Windows ... Linux gives you the whole house. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact

Bug#587388: d-i: fails to install grub-2

2010-06-28 Thread Chris Bell
On Mon 28 Jun, Colin Watson wrote: On Mon, Jun 28, 2010 at 08:12:58AM +, Chris Bell wrote: Installer used on 27/06/2010 to install squeeze, which failed to install grub-2, then failed to revert to grub-legacy, so I used dd to copy /dev/zero to the disc and started again, attempting

Bug#575309: user-setup: Should stop adding first user to device access groups

2010-03-25 Thread Chris Bell
starting from a higher UID with the same UIDs throughout the local network, finally deleting the initial user account. If it is easy to add new users from a list it is also easy to delete the first account when not required. -- Chris Bell www.chrisbell.org.uk (was www.overview.demon.co.uk

Bug#544106: xorg configuration missing from i386 gnome and kde

2009-08-30 Thread Chris Bell
/etc/X11/xorg.conf is created but is empty, and is not changed using dpkg-reconfigure xorg.conf The standard text console is configured to en-GB as requested. I tried /etc/X11/xorg,conf from another computer, but then X-windows did not start. -- Chris Bell -- To UNSUBSCRIBE, email

Bug#486168: Success, please close bug report.

2008-10-15 Thread Chris Bell
the (correct) 686 kernel was selected. The re-boot continued normally after removing the memory hole and re-installing with the 686 kernel using a recent daily installer. -- Chris Bell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#486168: Lenny Beta2 Kernel Panic - fails to re-boot on HP Netserver E60

2008-10-11 Thread Chris Bell
On Fri 13 Jun, Chris Bell wrote: Package: installation-reports Boot method: Lenny Beta2 Businesscard CD for i386 Image version: debian-LennyBeta2-i386-businesscard.iso Date: several attempts from 10.06.2008 Machine: HP NetServer E60 Processor: Dual Pentium II 400MHz Memory: 512MBytes

Bug#486168: Lenny Beta2 Kernel Panic - fails to re-boot on HP Netserver E60

2008-06-18 Thread Chris Bell
On Tuesday 17 June 2008 16:49, Frans Pop wrote: reassign 486168 linux-2.6 2.6.24-7 thanks On Friday 13 June 2008, Chris Bell wrote: Comments/Problems: On re-boot the A channel is identified, but kernel panic while checking the B channel. scsi 0 : adaptec AIC 7xxx EISA/VLB/PCI SCSI

Bug#486168: Lenny Beta2 Kernel Panic - fails to re-boot on HP Netserver E60

2008-06-18 Thread Chris Bell
On Tuesday 17 June 2008 16:49, Frans Pop wrote: reassign 486168 linux-2.6 2.6.24-7 thanks On Friday 13 June 2008, Chris Bell wrote: Comments/Problems: On re-boot the A channel is identified, but kernel panic while checking the B channel. scsi 0 : adaptec AIC 7xxx EISA/VLB/PCI SCSI

Bug#486168: Additional information from Knoppix 5.1.1

2008-06-17 Thread Chris Bell
]:~$ -- Chris Bell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#486168: Lenny Beta2 Kernel Panic - fails to re-boot on HP Netserver E60

2008-06-13 Thread Chris Bell
aic 7895 Ultra SCSI adapter aic 7895C: UltraWide Channel A, SCSI Id=7, 32/253 SCBs ACPI : PCI Interrpt :00:05.1 [B] - GSI 18 (level, low) - IRQ 17 Kernel Panic - not syncing: HOST_MSG_LOOP with invalid SCB ff Hangs Details copied to paper from screen display. -- Chris Bell

Bug#477988: Failed to detect ROM drive after starting installation

2008-04-26 Thread Chris Bell
installation proceedure? I have no further access to the laptop, this report was submitted afterwards. -- Chris Bell NEW alternative address: chrisbell at chrisbell.org.uk Microsoft sells you Windows ... Linux gives you the whole house. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject

Bug#476897: installation-report: apt-cdrom missing from i386 daily images

2008-04-25 Thread Chris Bell
of reports about CD-ROM not found, with a final note suggesting a re-boot using irqpoll. The next installation was started including irqpoll, and it went without a hitch. IBM ThinkPad i Series 1161-93G with Toshiba DVD-ROM SD-c2402, ATAPI CD/DVD-ROM drive -- Chris Bell NEW alternative address

Bug#465320: CD doesn't boot (Isolinux errors) on 486 with Adaptec SCSI

2008-02-11 Thread Chris Bell
. -- Chris Bell NEW alternative address: chrisbell at chrisbell.org.uk Microsoft sells you Windows ... Linux gives you the whole house. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#452388: Standard system is confusing

2007-11-25 Thread Chris Bell
line. Any suggestions as to which an accurate description would be? -- Robert Millan Standard system without desktop? -- Chris Bell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#441446: Swap partition problem with low memory expert floppy install

2007-10-02 Thread Chris Bell
On Tue 02 Oct, Jérémy Bobbio wrote: On Sun, Sep 09, 2007 at 09:05:36PM +, Chris Bell wrote: I then attempted to install a second system on hdb plus hdc, with swap plus a single RAID 1 partition on each disc. I tried several times with similar parameters, and each time the swap

Bug#442437: debian-installer: installer keeps probing for non-existent floppy

2007-09-16 Thread Chris Bell
yet, detecting that the system doesn't have a floppy and not probing at all. There is usually a BIOS setting for Floppy: NONE Microsoft sells you Windows ... Linux gives you the whole house. -- Chris Bell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe

Bug#440185: FW: new install won't boot completely

2007-08-31 Thread Chris Bell
to dpkg-reconfigure xserver-xorg -- Chris Bell

Bug#418341: turning DMA off

2007-04-14 Thread Chris Bell
On Fri 13 Apr, Geert Stappers wrote: Op 13-04-2007 om 18:27 schreef Chris Bell: I usually find that DMA has been turned on but the drive is unable to comply, so I turn DMA off for that drive. How? Please spend some more time on this bugreport. Example given: tell/explain how

Bug#418341: Reopen 418341

2007-04-13 Thread Chris Bell
On Fri 13 Apr, Renato S. Yamane wrote: Frans, I found more bugs about CD ROM / HD not recognized: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=418972 I usually find that DMA has been turned on but the drive is unable to comply, so I turn DMA off for that drive. -- Chris Bell

Bug#409217: Still problems, but have I found the answer?

2007-03-30 Thread Chris Bell
, with no other access allowed, instead of /var/cache/apt-proxy where it does have access permissions. It is therefore unable to provide these files. Not even aptitude running on the box that is also running apt-proxy is able to obtain these files from apt-proxy. -- Chris Bell -- To UNSUBSCRIBE, email

Bug#409217: Apt-proxy Release.gpg now working

2007-03-03 Thread Chris Bell
with apt-proxy. Please close the bug report. -- Chris Bell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#409217: Release.gpg problem

2007-02-20 Thread Chris Bell
-proxy but the etch boxes complain about Release.gpg and give a red warning about an untrusted source when trying to install updated packages. -- Chris Bell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#409217: Still problems with apt-proxy 1.9.35-0.2

2007-02-15 Thread Chris Bell
that are still running sarge seem to be working normally. -- Chris Bell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#409217: apt-proxy now fails to deliver Release.gpg to sarge boxes

2007-02-04 Thread Chris Bell
Apt-proxy-v2 is retrieving and updating the file Release.gpg but not delivering it on demand to boxes running either sarge or etch, although I can see the file in the normal location within apt-proxy cache. I suspect it is not found because apt-proxy is searching in the wrong places. -- Chris

Bug#409217: I forgot one directory layer in the addresses

2007-02-01 Thread Chris Bell
/dists/etch/contrib/package.name /var/cache/apt-proxy/debian/dists/etch/non-free/package.name -- Chris Bell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#409217: apt-proxy file access problems from etch

2007-01-31 Thread Chris Bell
? Thanks for all the hard work. -- Chris Bell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]