Package: samba
Version: 2:3.6.15-1~bpo70+1
Severity: important
Dear Maintainer,
After upgrading to wheezy the module shadow_copy2 does not work as expected
(nothing is visible in windows tab for previous versions).
Error message is: shadow:snapdir not found for /home in get_shadow_copy_data
Package: postfix
Version: 2.9.3-2.1
Severity: wishlist
Hi,
Is it please possible that postfix 2.10 is pushed to debian packages
(experimental) or a separate repository ?
The proxy protocol is a nice feature (used with haproxy). It is
available from postfix 2.10+.
Thanks
Laurent
-- System
On 02/06/2011 00:36, Mattia Dongili wrote:
On Wed, Jun 01, 2011 at 07:35:19PM +0200, Laurent CARON wrote:
Package: xserver-xorg-input-synaptics
Version: 1.4.0-1+b1
Severity: normal
Hi,
Since this version i can't use the vertical/horizontal scrolling areas
from my laptop (Sony Vaio Z1 series
Package: xserver-xorg-input-synaptics
Version: 1.4.0-1+b1
Severity: normal
Hi,
Since this version i can't use the vertical/horizontal scrolling areas
from my laptop (Sony Vaio Z1 series)
-- Package-specific info:
X server symlink status:
lrwxrwxrwx 1 root root 13 Mar
On 07/11/2010 12:02, Laurent CARON wrote:
On 07/11/2010 02:27, Simon Horman wrote:
On Sat, Nov 06, 2010 at 08:07:13PM +0100, Laurent CARON wrote:
On 30/10/2010 08:54, Simon Horman wrote:
On Sat, Oct 30, 2010 at 08:18:33AM +0200, Laurent Caron wrote:
On Sat, Oct 30, 2010 at 02:11:57PM +0900
On 11/12/2010 10:03, Julien Cristau wrote:
On Sat, Dec 11, 2010 at 08:08:41 +0100, Laurent CARON wrote:
Package: xserver-xorg-video-intel
Version: 2:2.13.0-4
Severity: important
Hi,
After upgrading from
2:2.13.0-4
to
2:2.13.0-2
the screen resolution doesn't go to 1920x1080 anymore.
You
On Sat, Oct 30, 2010 at 02:11:57PM +0900, Simon Horman wrote:
On Fri, Oct 29, 2010 at 10:54:55PM +0200, Laurent Caron wrote:
could you give a little bit more detail on the configuration
that you have that segfaults?
Hi Simon,
Here you go:
$ /etc/ha.d/resource.d/IPv6addr abcd:abc:abc:a::b/64
Package: heartbeat
Version: 2.1.3-6lenny4
Severity: grave
Justification: renders package unusable
Hi,
Heartbeat doesn't seem to play nice with ipv6.
It segfaults while trying to add an IPv6 address.
-- System Information:
Debian Release: 5.0.6
APT prefers stable
APT policy: (500,
Package: dahdi-source
Version: 1:2.3.0.1+dfsg-1
Severity: wishlist
Hi,
ISDN controller: Cologne Chip Designs GmbH ISDN network Controller
[HFC-4S] (rev 01) is not supported by the current dahdi.
{ 0x1397, 0x08b4, 0x1397, 0xb762, 0, 0, (unsigned long)hfc4s_BN },
added is enough to make it
On 20/10/2010 18:37, Tzafrir Cohen wrote:
I see that this is not yet included upstream. What card is it, exactly?
How does it show on lspci -v ?
Hi,
04:04.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
Controller [HFC-4S] (rev 01)
Subsystem: Cologne Chip Designs GmbH
Package: radvd
Version: 1:1.1-3
Severity: important
Hi,
Over the time, on my system radvd eats 100% of cpu.
The init script can't restart it. I do have to kill -9 it and then start
it.
Thanks
Laurent
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (500,
On 09/02/2010 18:06, Debian Bug Tracking System wrote:
This is an automatic notification regarding your Bug report
which was filed against the apticron package:
#567820: apticron: Apticron fails with Content-type: text/plain; charset=UTF-8:
No such file or directory when *not* using bsd-mailx
Package: apticron
Version: 1.1.27
Severity: normal
Hi,
After apticron's run, i did notice mails only containing:
Content-type: text/plain; charset=UTF-8: No such file or directory
It seems to be caused by mailx.
mailx on my system was heirloom mailx, and I had to enable bsd-mailx to
solve it.
Package: procps
Version: 1:3.2.8-1
Severity: important
File: /usr/bin/top
Hi,
Top segfaults since latest dist-upgrade:
donald:~% top
zsh: segmentation fault top
donald:~%
Thanks
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable-i386
APT policy: (500,
Package: phpmyadmin
Version: 4:2.11.8.1-5+lenny1
Severity: critical
Tags: security
Justification: root security hole
Hi,
After looking at my logs, I did notice a lot of attempts to break in
phpmyadmin through the following kind of url:
82.79.155.33 - - [29/Jun/2009:03:32:31 +0200] GET
Package: shorewall-perl
Version: 4.2.7-1
Severity: important
Hi,
I'm unable to use 1:1 nat with the version in SID because of this known
bug.
Can you please say me if you have planned a release about the latest
version of shorewall since I'm in need of 1:1 NAT ?
Thanks for your help.
Laurent
Package: openswan
Severity: wishlist
Hi,
It sould really be a nice feature to be able to specify lock the mtu
for a specific tunnel when having issues at some ISPs.
For the time being I had to override the mtu in /usr/lib/ipsec/_updown
parms3=$parms3 mtu lock 1412
Thanks
Laurent
--
Christian Perrier wrote:
Quoting Steve Langasek (vor...@debian.org):
On Thu, Feb 19, 2009 at 11:32:28PM +0100, Laurent CARON wrote:
Steve Langasek wrote:
Sorry, I should have been more explict - which of these lines is the last
one printed, before the script pauses for this long time
Steve Langasek wrote:
No such problem here. Please run 'sh -x /etc/init.d/samba restart' as a
first step to see where this time is being spent.
Hi,
+ RUN_MODE=daemons
+ '[' -r /etc/default/samba ']'
+ . /etc/default/samba
++ RUN_MODE=daemons
+ PIDDIR=/var/run/samba
+
Steve Langasek wrote:
Sorry, I should have been more explict - which of these lines is the last
one printed, before the script pauses for this long time?
It is pausing for more than 6 mins right after Starting Samba daemons:
nmbd smbd
gw:~# sh -x /etc/init.d/samba restart
+
Package: samba
Version: 2:3.2.5-4
Severity: important
Hi,
After having upgraded from etch to lenny my samba server takes up to 10
mins to start.
eg:
gw:~# ps aux | grep smb
root 10342 0.0 0.0 164956 1416 ?Ss Feb17 0:00 /usr/sbin/smbd
-D
root 10348 0.0 0.0 164956
Paul Slootman wrote:
Is there any further news on this?
If it doesn't happen anymore, I'd like to close the bug.
Hi,
Seems fixed with either the latest backports or the sid version.
Thanks
Laurent
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Package: dvb-utils
Version: 1.1.1-3
Severity: important
Hi,
The file should look like that to be able to use scan on it:
# Paris - France (DVB-T transmitter of the Eiffel tower)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
T 474167000 8MHz 2/3 NONE QAM64 8k 1/32
Julien Cristau wrote:
That config presumably worked with xserver 1.3, so it'd be better if we
didn't break it. Could you rebuild the X server with the following
patch, and see if that works (with the AlwaysCore option in your
config)?
Yes, please send me the modified binary file, and i'll try
Julien Cristau wrote:
Hi,
you reported a problem with the synaptics driver not reporting any
events for your touchpad.
Can you attach the contents of /proc/bus/input/devices to this bug?
Also, please test with the packages from testing (you would need to
downgrade your video driver, input
Paul Slootman wrote:
Alternatively, if you want to help fix this bug in 2.6.9, you could
download http://debian.wurtel.net/i386/rsync and use that (it's
basically a 2.6.9_2etch2 built without optimization and not stripped).
First do ulimit -c unlimited, and trigger the bug. You should then
have
Package: rsync
Version: 2.6.9-2etch1
Severity: critical
Justification: causes serious data loss
Hi,
I did notice that rsync fails to transfer some files (eg:
/var/log/ntpstats/*) and dies on files in that directory on any
non-initial run.
On the first run, it all goes well.
On the subsequent
Paul Slootman wrote:
If i now use an exclude (--exclude='var/log/ntpstats'), it finishes
without any problem.
You already used that exclude. At least you show you did, although the
output is not consistent with that.
My mistake, the command-line is wrong. The exclude was not there
Anibal Avelar wrote:
I tested with openbox 3.4.5-1 and I confirm the program xrootconsole
worked fine (the same version). Indeed xrootconsole is a very old
program (the latest version was since 2004). The latest changes on
openbox 3.4.6.1 to affect its behaviour.
Hi,
Although (very?) old,
Package: xrootconsole
Version: 1:0.5-1.1
Severity: important
Hi,
Since i dist-upgraded two of my sid boxes, i'm unable on those machines
to right click on the desktop.
When i do so, no menu appears.
If i reduce xrootconsole i can click outside of it (not very practical).
Package: openbox
Version: 3.4.6.1-2
Severity: important
Hi,
Since i dist-upgraded two of my sid boxes, i'm unable on those machines
to right click on the desktop.
When i do so, no menu appears.
If i reduce xrootconsole i can click outside of it (not very practical).
Mattia Dongili wrote:
while the non-working has everything in place.
What does
synclient -l
neptune:~# synclient -l
Parameter settings:
LeftEdge= 120
RightEdge = 930
TopEdge = 120
BottomEdge = 700
FingerLow
Package: xserver-xorg-input-synaptics
Version: 0.14.7~git20070706-2
Severity: grave
Justification: renders package unusable
Hi,
I did just dist-upgrade my laptop running sid and did experience a
touchpad problem.
After rebooting, my touchpad no longer works.
If I plug a USB mouse, the USB
Package: netstat-nat
Version: 1.4.8-1
Severity: grave
Justification: renders package unusable
Hi,
Netstat-nat simply segfaults.
-
gw:~# netstat-nat
Proto NATed Address Destination Address
State
Segmentation fault
gw:~#
Package: fiaif
Version: 1.21.1-6
Severity: wishlist
Hi,
The TC_VOIP config option works very well, I however have to manually
edit traffic-shaping.sh to guarantee more than 128kb for VOIP.
128kb is too little for some of my remote sites where I may need to get
1Mb guaranteed for it.
eg:
Package: fiaif
Severity: important
Hi,
When enabling TC_VOIP in any zone, an error pops-up stating that this
parameter is not valid.
After digging in /usr/share/fiaif/zone_rules.awk, we can see a typo:
RULE[TC_VIOP] instead of VOIP
Laurent
-- System Information:
Debian Release: lenny/sid
Hi,
I did encounter the same the exactly same problem
changing to root:root definitely fixes this issue.
Laurent
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: libpam-ssh
Version: 1.91.0-9.1
Severity: important
Hi,
Since my last dist-upgrade (a few days ago), libpam-ssh is not anymore
behaving the old good way.
It is started from /etc/pam.d/gdm in my case, and was decyphering my ssh
keys properly.
From now i have to type my password twice
Anders Peter Fugmann a écrit :
What problem are you experiencing? Also the configuration parameters for
the traffic shaping part would be nice.
Regards
Anders Fugmann
Hi
I was experiencing very low throughput.
zone.ext had the following settings
TC_ENABLE=1
TC_TYPE=HTB
TC_DOWNLINK=2
Package: fiaif
Version: 1.21.1-2
Severity: important
Hi,
After switching to FIAIF 1.21.1 and using the HSFC shaper, i've got a
problem on a server which has two ppp internet links.
Those two links were happily protected by a single zone using ppp+ as
the interface name.
After upgrading to the
Package: fiaif
Version: 1.21.1-2
Severity: important
Hi,
After a FIAIF upgrade to the latest build, it seems that traffic shaping
is a bit broken on my setup.
My internet link is now limited to about 1Mbit(downlink) when fiaif is
running (instead of 20Mbit).
Here are the tc shaping rules
Package: nscd
Version: 2.3.6.ds1-8
Severity: important
Hi,
After each upgrade of nscd, i have to purge /var/db/nscd from old files.
If i don't do it, nscd runs fine for a couple of mins, then dies.
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500,
Package: sasl2-bin
Version: 2.1.22.dfsg1-2
Severity: important
After upgrading that package, I get the following errors in my mail.log
when trying to authenticate for sending mails (using postfix).
Nov 14 10:43:16 gw postfix/smtpd[3596]: connect from mailclient[ipOFmailCLIENT]
Nov 14 10:43:17
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
please note that removing libsasl2-2 solves the problem too.
Laurent
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
ln -is /usr/lib/libobrender.so.0.4.0 /usr/lib/libobrender.so.1
ln -is /usr/lib/libobparser.so.0.4.0 /usr/lib/libobparser.so.1
seem to fix the problem
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: udev
Version: 0.097-1
Severity: critical
Justification: breaks the whole system
I had to remove the symlink z60_mdadm.rules - ../mdadm.rules to get
system boot again.
Since i have /boot on md0 (raid1) / on md1 (raid5) /boot would not
mount.
Removing the symlink makes the devices to
Package: gaim
Version: 1:1.5.0+1.5.1cvs20051015-5
Severity: important
Since last update Gaim just segfaults after connection.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386
Package: bzip2
Version: 1.0.3-3
Severity: important
bzip2 in /bin makes calls to /usr/bin/bzip2 fail which is a serious bug.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386
Package: openbox
Version: 3.2-9
Severity: grave
Justification: renders package unusable
Since last dist-upgrade, my openbox menux are inactive. I mean i'm able
to launch x terminal emuilator, but no other app launches.
Laurent
-- System Information:
Debian Release: testing/unstable
APT
Debian Bug Tracking System wrote:
Thank you for the problem report you have sent regarding Debian.
This is an automatically generated reply, to let you know your message has
been received. It is being forwarded to the package maintainers and other
interested parties for their attention; they
Package: nfs-common
Version: 1:1.0.7-10
Severity: normal
This is a real problem to create a directory under /home
- It is not really clean
- My /home is nfs mounted (autofs) and thus installation fails.
Thanks to fix it ;)
Laurent
-- System Information:
Debian Release: testing/unstable
Bob Proulx wrote:
Laurent CARON wrote:
Package: coreutils
Version: 5.2.1-2.1
Severity: important
That would be a testing version uploaded on 2005-09-04 but should
mostly be the same as the stable Sarge version. Not having 5.2.1-2.1
handy I tested using 5.2.1-2 from Sarge.
i use
Package: coreutils
Version: 5.2.1-2.1
Severity: important
i use the following command to print my mail logs on my desktop.
ssh -t mailserver.domain.tld tail -F /var/log/mail.log | xrootconsole -geo
210x51+0+512 -fn 6x10 -fg green --wrap
Having /var/log/mail.log a symlink to
Drew Parsons wrote:
On Mon, 2006-04-17 at 23:13 +0200, Laurent CARON wrote:
Package: xprint
Version: Xprint fails to start
Severity: critical
Justification: breaks unrelated software
Xprint is broken after last sid update
Hi Laurent,
did you use reportbug to make this report? Normally
Package: fiaif
Version: 1.20.1-2
Severity: important
Hi,
I'm running an openswan gateway for quite a long time now.
I have used 2.4.X and 2.6.X kernels without any problem until i decided
to upgrade to 2.6.16 kernel.
Summary of problem:
Under 2.6.15 everything is fine
Under 2.6.16 my
Package: xprint
Version: Xprint fails to start
Severity: critical
Justification: breaks unrelated software
Xprint is broken after last sid update
Had to add the following line to make it start
[ -d /usr/bin ] XPROJECTROOT=/usr/bin
otherwise i'd get:
/etc/init.d/xprint start
Package: x11-common
Version: 1:7.0.12
Severity: critical
Justification: breaks unrelated software
GDM KDM fails to start because they can't find /usr/X11R6/bin/X
you have to mkdir /usr/X11R6/bin ln -s /usr/bin/X /usr/X11R6/bin/X
to make it work again.
-- System Information:
Debian
Package: gdm
Version: 2.13.0.10-2
Severity: important
GDM fails to start because path of Xserver is hardcoded /usr/bin/X11R6/X
instead of using /usr/bin/X
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500,
Steve Langasek a écrit :
On Tue, Jan 24, 2006 at 07:20:50PM +0100, Laurent CARON wrote:
Package: syslog-ng
Version: 1.9.8
Severity: critical
Justification: breaks the whole system
Installed latest syslog-ng from unstable.
When an event of priority crit is logged it is repeated until
SZALAY Attila a écrit :
Hi!
On Tue, 2006-01-24 at 19:20 +0100, Laurent CARON wrote:
When an event of priority crit is logged it is repeated until
/var/log/syslog reaches 2Gb (2048Mb), and then the syslog-ng process
dies.
Jan 24 19:18:15 gw lcaron: a
Jan 24 19:18:15 gw lcaron: a
Jan 24 19
SZALAY Attila a écrit :
Hi!
On Wed, 2006-01-25 at 09:27 +0100, Laurent CARON wrote:
#
# filter f_attention { level(err .. emerg); };
destination buckrogers { udp(buckrogers); };
log { source(s_all); filter(f_attention); destination(buckrogers); };
#
The problem is with the destination
Package: syslog-ng
Version: 1.9.8
Severity: critical
Justification: breaks the whole system
Installed latest syslog-ng from unstable.
When an event of priority crit is logged it is repeated until
/var/log/syslog reaches 2Gb (2048Mb), and then the syslog-ng process
dies.
Reverted to latest
Package: nscd
Version: 2.3.2.ds1-22
Severity: critical
Justification: breaks unrelated software
I'm using nscd (sarge version) with LDAP, and it is not working.
Attaching to it with strace -p $PID shows no activity while doing a
simple ls -al /home with a few directories in /home, making
Package: fiaif
Version: 1.20.0-2
Severity: critical
Tags: security
Justification: root security hole
Facts:
FIAIF with 3 zones
zone.tun
zone.int
zone.ext
zone.tun is used for a tun device
zone.int is for the internal lan
zone.ext is for the internet
zone.int settings:
SNAT[0]=EXT ALL
Bastian Kleineidam wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Laurent,
sorry for taking so long to tackle your bug report.
On Tue, Dec 13, 2005 at 07:49:50AM +0100, Laurent CARON wrote:
I just installed latest FIAIF package, and when my ppp connection went
down, and then up
Package: fiaif
Version: 1.20.0-1
Severity: critical
Justification: breaks the whole system
I just installed latest FIAIF package, and when my ppp connection went
down, and then up i was unable to browse the internet.
After FIAIF upgrade, references to the CBQ shaper are left in the old
zone
Package: knockd
Version: 0.5-1
Severity: grave
Justification: renders package unusable
Knockd since last version is not working on ppp interfaces.
It is not 'seeing' packets that should trigger it.
Reverting back to an old version solves the problem.
Laurent
-- System Information:
Debian
Package: bluez-utils
Version: 2.19-1
Severity: grave
Justification: renders package unusable
After having upgraded to new bluez-utils i'm unable to connect my phone
(Ericsson T630) anymore.
I can connect by deleting association and recreating *each time*.
Downgrading to the stable version
Debian Bug Tracking System wrote:
Thank you for the problem report you have sent regarding Debian.
This is an automatically generated reply, to let you know your message has
been received. It is being forwarded to the package maintainers and other
interested parties for their attention; they
Package: munin
Version: 1.2.3-1
Severity: grave
Justification: renders package unusable
For 2 weeks now munin is broken on my system
Following errors can be found in munin-graph.log
aoû 22 06:31:04 - Graphed service : nfsd (0.01 sec * 4)
aoû 22 06:31:04 - Unable to graph
Package: libapache2-mod-perl2
Version: 2.0.1-3
Severity: normal
It is strange that file /etc/apache2/mods-available/perl.conf only
contains Hi Mom!
Don't you think so?
Thanks
Laurent
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500,
Package: ldap-utils
Version: 2.2.23-1
Severity: grave
Justification: renders package unusable
I installed ldap-utils on 8th April, and everything seemed fine until I
tried to add a new user on my system.
It complained about missing slappasswd (/usr/sbin/slappasswd -
../lib/slapd). On another
72 matches
Mail list logo
