On Mon, Aug 25, 2008 at 08:12:33PM +0200, Julien Cristau wrote:
(for some reason i never saw this report..)
On Fri, Mar 14, 2008 at 13:01:42 +0100, Sjoerd Simons wrote:
I just had a quite nasty experience. When running hal in verbose mode
in a x terminal it locks up my X, untill i kill
Package: libvirt0
Version: 0.4.4-3
Severity: normal
Hi,
libvirt currently assumes that KVM can't do SMP yet, so it sets the maximum
number of cpus to 1. Which means that you can't change the number of cpu's
using virsh setvcpu to more then 1...
Sjoerd
-- System Information:
Debian
On Thu, Aug 21, 2008 at 06:51:00PM +0200, Guido Günther wrote:
On Thu, Aug 21, 2008 at 03:58:22PM +0100, Sjoerd Simons wrote:
libvirt currently assumes that KVM can't do SMP yet, so it sets the
maximum
number of cpus to 1. Which means that you can't change the number of cpu's
using
On Tue, Aug 05, 2008 at 09:51:20PM -0500, Diego Escalante Urrelo wrote:
tag 491270 fixed-upstream
thanks
Just letting you know that the patch is correct and was also fixed in
upstream's head.
I know, i was the one submitting the patch upstream.
Please include this patch in the debian
Package: libdvdnav4
Version: 4.1.2-3
Severity: important
Hi,
While trying to play Minority report with either vlc or totem i hit the
following assertion:
libdvdnav: Using dvdnav version 4.1.2 from http://dvd.sf.net
libdvdnav: DVD Title: MINORITY_REPORT_DISC1
libdvdnav: DVD Serial Number:
On Mon, Jun 30, 2008 at 02:38:55AM +0100, Simon McVittie wrote:
And in this case it's not even clear who's at fault.
AFAIK the kernel will normally survive not being able to load firmware:
the module will be loaded, but the device not enabled.
Not in this case, apparently!
I suppose
On Sun, Jun 29, 2008 at 01:29:36AM +0200, Frans Pop wrote:
On Sunday 29 June 2008, Sjoerd Simons wrote:
Comments/Problems:
Boot stops after: Freeing unused kernel memory: 228k freed
I see:
2: console=ttyB0
Which leads me to suspect that this may be #484366.
Can you try booting
Package: login
Version: 1:4.1.1-2
Severity: normal
Hi,
When booting a HPPA with a serial management card the onboard serial access
port become ttyB0, which is not in securetty.
Sjoerd
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: network
Image version: Lenny beta2
Date: Sun Jun 29 16:10:23 BST 2008
Machine: HP D9000 D220
Partitions: df -Tl will do; the raw partition table is preferred
Disk /dev/sda: 9104 MB, 9104953344 bytes
64
Package: gcc-4.3
Version: 4.3.1-2
Severity: serious
When using the following (somewhat contrived code):
--
#include stdio.h
#include stdint.h
#include stdlib.h
#include string.h
void
misc (uint8_t **header)
{
uint8_t *h;
h = malloc(8);
*((uint64_t *) h) = (uint64_t) 0;
*((uint32_t
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: network
Image version:
http://people.debian.org/~joeyh/d-i/armel/images/daily/iop32x/netboot/ -- June
28 2008
Date: June 28, 2008
Machine: Thecus N2100
Partitions:
Disk /dev/sda: 160.0 GB, 160041885696
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: network
Image version: Lenny beta2 netboot
Date: Sat Jun 28 23:23:17 BST 2008
Machine: HPPA D9000 D390
Partitions: Didn't come that far
Base System Installation Checklist:
[O] = OK, [E] = Error (please
On Tue, Jun 24, 2008 at 08:44:23AM +0200, Mike Hommey wrote:
Or maybe something like this:
diff --git a/JavaScriptCore/wtf/FastMalloc.cpp
b/JavaScriptCore/wtf/FastMalloc.cpp
index 8afc70d..496d1ee 100644
--- a/JavaScriptCore/wtf/FastMalloc.cpp
+++ b/JavaScriptCore/wtf/FastMalloc.cpp
@@
On Mon, Jun 09, 2008 at 03:02:22PM +0200, Benjamin Leipold wrote:
Package: pulseaudio
Version: 0.9.10-2
Severity: normal
If using module-hal-detect to let pulseaudio automatically configure
alsa-source and alsa-sink, pulseaudio doesn't start because it cannot
open PCM
device hw:0 for
On Sun, Apr 13, 2008 at 10:19:56PM +0200, Johannes Berg wrote:
After removing a module that had an rfkill input device, for
example b43 (where b43 is compiled with rfkill support), the
input addon hangs in a poll loop that includes an invalid file
descriptor pointing to the event device that
On Mon, Apr 28, 2008 at 11:28:12PM +0200, Alain Cabiran wrote:
Hello, after upgrading to lenny, i found many read/write reg
errors in my logs, and mplayer and kaffeine were unable to
tune channels.
Running amsn logs error of loading firmware. if i asked
mplayer to play analog tv channel,
Package: libenchant-dev
Version: 1.3.0-5+b1
Severity: serious
enchant.pc requires gmodule-2.0. Which adds --export-dynamic, which breaks
libraries that use version scripts for linking (as in it forces all symbols to
be exported not only the one in defined as global in the version scripts). For
severity 480694 important
tags 480694 +unreproducible
thanks,
On Sun, Jun 01, 2008 at 08:58:15PM +0200, Martin Steigerwald wrote:
Too late. When I upgrade hal to 0.5.11-1 again it appears to work as
expected. Should it happen again, I will try as you suggested. I
saved a copy of the
On Wed, May 28, 2008 at 11:39:12PM +0200, Martin Steigerwald wrote:
Am Mittwoch 28 Mai 2008 schrieb Michael Biebl:
Michael Biebl schrieb:
Martin Steigerwald schrieb:
Output of
strace -o /tmp/strace-hald.txt -fF hald
attached.
Does it help, if you delete the fdi cache
On Fri, May 09, 2008 at 09:34:44PM -0400, Chris AtLee wrote:
My laptop fails to restore the display properly with the quirks
specified in the standard files.
Your patch adds vbemode_restore. Which was specifically removed from hal-info
according to the changelog:
commit
On Wed, Apr 30, 2008 at 10:43:44PM +0200, Rico Pietzsch wrote:
Package: hal
Version: 0.5.11~rc2-1
Severity: important
I use an ms presenter 8000 bluetooth mouse.
(added via hidd --connect bluetooth ID)
If i poweroff the mouse (after use) the hal-addon-input process gets
maximum cpu load.
Package: hotkey-setup
Version: 0.1-21
Severity: serious
As said in the subject. hotkey-setup breaks suspend (or actually resume) on a
HP 6701B. The hotkey-setup sets the DOS entry of the acpi video bits to 4
(which is a bit odd in itself as it's defined as a 2 bit value afaik).
Unfortunately some
On Fri, Oct 05, 2007 at 09:35:40AM -0500, Juan Manuel Coronado Z. wrote:
Greetings,
FS was on an very early stage when I made the ITP. However the software
is a lot more mature now and I've been using it, and working on this
package lately and therefore I want to reopen the ITP wnpp bug.
On Tue, Apr 29, 2008 at 09:00:17AM +0200, Fabian Greffrath wrote:
Sjoerd Simons schrieb:
Your right on complexity ofcourse, but the current rules are 99.9% there. The
change i sent in a previous mail is basically enough for me so :).. The extra
complexity of splitting the external stuff
On Mon, Apr 28, 2008 at 10:13:55AM +0200, Loïc Minier wrote:
On Sun, Apr 27, 2008, Reinhard Tartler wrote:
It would rock if would be some set of DEB_BUILD_OPTIONS to only
enable internal risky stuff, so i could do this without needing to
do hacks in debian/ at all :)
I'm sorry
On Mon, Apr 28, 2008 at 09:38:11PM +0200, Reinhard Tartler wrote:
I hope you both don't object CC'ing the bug, so that lool does see this
conversation as well. Sjoerd, may I bounce our private mails of this
thread to the BTS?
Sure, i didn't even notice i dropped the BTS from the replies.
On Sun, Apr 27, 2008 at 09:06:22AM +0200, Harald Dunkel wrote:
Michael Biebl wrote:
IMHO hibernate is the special case. In a network environment it is
pretty optimistic to expect that a suspended Unix machine could
On a networked server, sure. But on a laptop (over 50% of newly sold
Package: ffmpeg-free
Severity: wishlist
Hi,
To be able to use video in some voip application i usually recompile an
unstripped ffmpeg on my own system (using the nice get-orig-source rules).
But i really want to minimize my non-vanilla debian pacakges to a minimum. So
i just want the
On Sat, Apr 26, 2008 at 09:24:40PM +0200, Harald Dunkel wrote:
Michael Biebl wrote:
We will certainly get a flood of messages from (desktop)users, where
suspend is not working anymore (klicking on gnome-power-manager fails,
boo). Imho we should optimise for the common case, not the
Package: libedataserver1.2-9
Version: 2.22.1-1
Severity: normal
Tags: patch
Hi,
The deprecated e_source_get_color function returns wrong values if the
color is saved as 16bits per color. While this function is deprecated it is
still used by at least dates and gnome-panel, so fixing that
On Tue, Apr 22, 2008 at 02:10:01PM +0200, Adeodato Simó wrote:
* Sjoerd Simons [Mon, 21 Apr 2008 20:27:34 +0200]:
Package: libgtk-vnc-1.0-0
Version: 0.3.5-2+b1
Severity: grave
Justification: renders package unusable
Hi,
When trying to connect to a remote machine i get
On Tue, Apr 22, 2008 at 06:14:24PM +0200, Guido Günther wrote:
Hi Sjoerd,
On Mon, Apr 21, 2008 at 08:27:34PM +0200, Sjoerd Simons wrote:
When trying to connect to a remote machine i get a BadColor error. This
happens both on amd64 and powerpc machine:
Does any of these machines use DRI
Package: libgtk-vnc-1.0-0
Version: 0.3.5-2+b1
Severity: grave
Justification: renders package unusable
Hi,
When trying to connect to a remote machine i get a BadColor error. This
happens both on amd64 and powerpc machine:
The program 'vinagre' received an X Window System error.
This
On Mon, Apr 14, 2008 at 02:33:43AM -0500, Diego Escalante Urrelo wrote:
Package: libfarsight0.1-3
Version: 0.1.27-1
Severity: serious
--- Please enter the report below this line. ---
Using debian sid to call another debian sid, I was unable to connect
both machines using empathy voip
Package: python-coherence
Version: 0.5.2-1
Severity: normal
Hi,
My media box has multiple network interfaces (external, internal, wireless).
Unfortunately it seems coherence only does it's announcing and discovering on
one of them instead of all of them.. Which makes it a lot less usefull
Package: ruby1.9-dev
Version: 1.9.0.1-1
Severity: grave
Justification: renders package unusable
Hi,
intern.h from ruby1.9-dev contains RUBY_EXTERN VALUE rb_argv; but libruby1.9
doesn't define such a symbol. Looking at ruby.c it does #define rb_argv
rb_get_argv(). So probably rb_get_argv
On Tue, Apr 08, 2008 at 08:03:29AM +0200, don Paolo Benvenuto wrote:
Il giorno mar, 08/04/2008 alle 00.23 +0200, Michael Biebl ha scritto:
don Paolo Benvenuto schrieb:
Package: hal
Version: 0.5.11~rc2-1
Severity: grave
Justification: causes non-serious data loss
About 3 weeks
On Wed, Apr 02, 2008 at 03:31:15PM +0200, Mathias Behrle wrote:
I am supposing, that 2) is the cause for the change, because experimenting
with nsswitch.conf showed, that eliminating [NOTFOUND=return] from line
hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4
brought back
Package: libgtk-vnc-1.0-0
Version: 0.3.4-2
Severity: normal
Hi,
I tried the experimental version of libgtk-vnc-1.0-0 on powerpc because of
the endianness fix. Unfortunaly this version causes a BadColor error from X,
while -1 worked fine modulo the color shifting:
The program 'vinagre'
On Sat, Dec 08, 2007 at 01:31:24PM +0100, Xavier Bestel wrote:
I just installed empathy-haze and entered my msn account details, it
looks like it works. But then I tried changing my icon, using Empathy's
personal informations menu (name translated from French). I choose an
icon (png file)
On Fri, Feb 22, 2008 at 10:13:23PM +0200, Eddy Petri??or wrote:
Package: gnome-power-manager
Version: 2.20.2-3
Severity: serious
Justification: doesn't do is basic functionality; no way to configure
I have observed that on my laptop, after some time of inactivity, and
after manually
On Thu, Mar 27, 2008 at 09:29:10AM +0200, Eddy Petri??or wrote:
Sjoerd Simons wrote:
On Fri, Mar 14, 2008 at 01:55:56PM +0200, Eddy Petri??or wrote:
I just tried using pulseaudio's network capabilities.
I was happy to see it can really use a remote sink[1], but I was really
upset to see
On Sat, Mar 15, 2008 at 06:20:52PM +0100, Sam Hocevar wrote:
Attached is a patch by Aurélien Jarno for pulseaudio support
(backported from VLC git tree).
The mandriva guys also patch their VLC with the pulse stuff. And have some
patches to fixup issues they had with it. Having a look at
Package: vlc
Version: 0.8.6.e-1
Severity: normal
Tags: patch
Hi,
VLC only plays without audio when using the pulse alsa plugin. When i looked
into this it seems that VLC requests quite a big buffer. Which is ofcourse
fine. Pulseaudio allows such a big buffer and will start playing when the
On Fri, Mar 14, 2008 at 01:55:56PM +0200, Eddy Petri??or wrote:
I just tried using pulseaudio's network capabilities.
I was happy to see it can really use a remote sink[1], but I was really upset
to see that when I tried to switch back to the local sync, it made rhythmbox
hang.
How did you
Package: libc6
Version: 2.7-9
Severity: normal
Hi,
libc6 assumes the answer argument to the res_query function which is of
type unsigned char * is aligned in such a way it can be cast to HEADER.
Thus following apparently correct code causes a SIGBUS on sparc:
#include stdio.h
On Wed, Mar 19, 2008 at 09:15:32PM -0400, The Anarcat wrote:
Package: hal
Version: 0.5.10-5
Severity: important
Since I upgraded from sarge to lenny, the screen backlight doesn't turn
off when suspending to ram from Gnome. Here's my original post about
this:
On Fri, Mar 21, 2008 at 01:11:14PM +0100, Sjoerd Simons wrote:
On Wed, Mar 19, 2008 at 09:15:32PM -0400, The Anarcat wrote:
Package: hal
Version: 0.5.10-5
Severity: important
Since I upgraded from sarge to lenny, the screen backlight doesn't turn
off when suspending to ram from Gnome
On Fri, Mar 21, 2008 at 12:31:26AM +0100, Michael Schmitt wrote:
Package: hal
Version: 0.5.11~rc2-1
Severity: important
I think everything is said already. No idea why / how hald triggers the tv
card, but after hald is started during booting the radio starts playing.
Disableing this
On Wed, Jan 23, 2008 at 04:50:32PM +, Tony Houghton wrote:
Any news? I can't see a recent upstream bug report for this. I made a
similar bug report there ages ago
http://bugzilla.gnome.org/show_bug.cgi?id=455250 but they haven't so
much as looked at it AFAICT.
Would you consider
On Wed, Mar 19, 2008 at 09:36:27PM +, James Westby wrote:
Thanks for the bug report. I am not going to fix this in the current
upload I'm afraid.
builddeb uses python's tarfile, and I can't see a way to either
give it a umask, or make it use the users.
Perhaps I can fix this by
reassign 471317 network-manager
On Tue, Mar 18, 2008 at 03:12:59AM +0100, Michael Biebl wrote:
reassign 471317 libglib2.0-0
thanks
Zitat von Neutron Soutmun [EMAIL PROTECTED]:
Confirm, downgrading the libglib to 2.14.6-1 and also 2.16.1-1 fix this
problem.
Thanks for the confirmation.
Package: lighttpd
Version: 1.4.19-1
Severity: normal
Hi,
I've always had ipv6 enabled in lighttpd using a config snippit in
conf-enabled. Now lighttpd switched to enabled ipv6 by default (which is very
nice).. Unfortunately the default config entries cause lighttpd to refuse to
start,
Package: rdnssd
Version: 0.9.5-1
Severity: normal
Hi,
Unfortunately the rdnssd merge-hook doesn't integrate with resolvconf.
Would be nice to add this so resolvconf can do proper merging of the various
dns servers.
Sjoerd
-- System Information:
Debian Release: lenny/sid
APT prefers
Package: bzr-builddeb
Version: 0.92
Severity: normal
Hi,
When unpacking a tarball with normal tar the permissions of the tarballs
contents are filtered through the set umask. So for example directories in
the tarball with permission 777 become 755 when your umask is the standard
022.
Package: bzr
Version: 1.2~rc1-1
Severity: normal
According documentation the argument --diff-options should be passed to the
external diff program, but they aren't. As shown by the strace output below
$ strace -f -eexecve bzr diff --using /usr/bin/diff --diff-options -wu
execve(/usr/bin/bzr,
reassign 459915 gst-pulse
thanks
On Thu, Feb 28, 2008 at 10:30:49PM +0100, Sven Arvidsson wrote:
reassign 459915 pulseaudio
thanks
On Wed, 2008-01-09 at 01:44 +0100, Johannes Berg wrote:
Package: rhythmbox
Version: 0.11.2-1+b1
Severity: normal
When you terminate the pulseaudio
Package: quagga
Version: 0.99.9-3
Severity: important
Hi,
As the subject says, quagga has a little bug causing it to not announce ipv6
prefixes. This was fixed in CVS in revision 1.10 of bgp_open.c see:
http://cvs.quagga.net/cgi-bin/viewcvs.cgi/quagga/bgpd/bgp_open.c
Package: vino
Version: 2.20.1-1
Severity: important
Hi,
vino seems to crash as soon as someone connects to it. error output and
backtrace of a version build with debugging symbols:
23/01/2008 05:46:47 PM Autoprobing TCP port
23/01/2008 05:46:47 PM Autoprobing selected port 5900
23/01/2008
On Mon, Jan 14, 2008 at 04:17:52PM +0100, Stefano Costa wrote:
On gio, 2008-01-03 at 14:17 +0100, Sjoerd Simons wrote:
This means that avahi failed to resolv the contact. Could have
multiple reasons. Could you run tcpdump/wireshark to see if there are
answers from portatile-elisa's box
On Sun, Jan 13, 2008 at 08:40:27PM +0100, Marc Fargas wrote:
Package: evolution
Version: 2.12.2-1+b1
Severity: normal
Hi,
According to the Help that comes with evolution and even some
screenshots around the web, when you are configuring an account there
should be an option like Use SSL or
Package: network-manager
Version: 0.6.5-3
Severity: normal
Hi,
This might be a kernel issue. But from time to time access points turn up
with all 0's as mac address and no essid. Unfortunately NM tries to merge
access points with no essid with the list of allowed access points. They only
On Wed, Jan 09, 2008 at 12:03:55PM +0100, Mathias Behrle wrote:
* Betr.: Re: [Pkg-utopia-maintainers] Bug#459843: dbus-x11 kills X window
system with ATI r128 (Wed, 09 Jan 2008 02:47:06 +0100):
Do you use remote login? Have you tried other login managers than kdm?
I very much doubt that
Package: rhythmbox
Version: 0.11.2-1+b1
Severity: normal
To reproduce, enable upnp, restart rhythmbox:
(gdb) bt
#0 0x2ab621832e7b in PyImport_GetModuleDict ()
from /usr/lib/libpython2.4.so.1.0
#1 0x2ab621832ecb in PyImport_AddModule ()
from /usr/lib/libpython2.4.so.1.0
#2
On Sat, Jan 05, 2008 at 11:11:39AM +, Debian Bug Tracking System wrote:
- nss_ldap constructs LDAP URIs incorrectlycloses: #425379
Unfortunately, it still goes wrong.. I'm seeing libnss-ldap trying to connect
to port 389, while the config says ldaps.
Sjoerd
--
To
Package: gstreamer0.10-ffmpeg
Version: 0.10.3-3
Severity: normal
Hi,
The new gst-ffmpeg doesn't seem to include a h261 encoder. Even though it
seems to be enabled in the system ffmpeg package:
$ ffmpeg -formats | grep h261
FFmpeg version SVN-rUNKNOWN, Copyright (c) 2000-2007 Fabrice
On Sat, Dec 15, 2007 at 01:42:20PM +0100, Stefano Costa wrote:
On ven, 2007-12-14 at 22:50 +, Simon McVittie wrote:
Sjoerd misspelled persist when asking you to run Salut manually. The
environment variable is SALUT_PERSIST=true, and it disables the timeout
behaviour you've just seen.
On Fri, Dec 28, 2007 at 12:15:16PM +, Richard Kettlewell wrote:
[EMAIL PROTECTED]:~$ ps -ef | grep hal
root 12050 12049 0 12:11 ttyp000:00:00 /bin/sh
/var/lib/dpkg/info/hal.postinst configure
root 12077 12050 0 12:11 ttyp000:00:00 /bin/sh
/usr/sbin/invoke-rc.d
reassign 457515 pm-utils
thanks,
On Tue, Dec 25, 2007 at 08:52:38PM +0100, Michael Biebl wrote:
Josselin Mouette schrieb:
reassign 457515 hal
thanks
On dim, 2007-12-23 at 11:26 +0930, Paul Wise wrote:
Package: gnome-panel
Version: 2.20.2-2
Severity: wishlist
Yesterday I
severity 456310 important
thanks
On Fri, Dec 14, 2007 at 03:34:25PM +0100, Stefano Zacchiroli wrote:
Severity grave since I bet other people with the same Intel card will
have a network shortage upon installing the current package version.
Downgrading to important. I've asked various people
reassign 456310 hal
forcemerge 456314 456310
tag 456314 +pending
thanks
On Sat, Dec 22, 2007 at 03:15:30PM +0100, Stefano Zacchiroli wrote:
*** [DIE] device_info.c:rules_match_and_merge_device():1089 : Rule is NULL on
jump
Ah, this is another case of #456310.. Which i'm actually currently
On Mon, Dec 17, 2007 at 02:38:10AM +, brian m. carlson wrote:
tags 456214 + patch
kthxbye
Attached is a patch to fix the problem with wakeups. This patch does
CDROM_MEDIA_CHANGED first, and if it reports true, then checks to make sure
the drive is closed and then that the drive is not
On Wed, Dec 19, 2007 at 10:52:53AM +0100, Emmanuel Fleury wrote:
2) Reverting to hal-info 20071030-1 (as suggested by Josselin Mouette)
did fix the network-manager-gnome-applet.
Lemme guess, your using a Fujitsu laptop. The hal i uploaded today should fix
the issues with the new hal-info, if
reassign 445917 pm-utils
thanks
On Tue, Dec 18, 2007 at 03:22:01PM +0100, Josselin Mouette wrote:
Right, just another case of hal doesn???t use the acpi-support scripts.
pm-utils handles powermanagement, not hal. And no we shouldn't use acpi-support
Sjoerd
--
Good morning. This is the
On Tue, Dec 18, 2007 at 02:03:30AM +, David Spreen wrote:
Sjoerd Simons wrote:
I've doublecheck bug 355967. But it seems the player has it's own power
supply too... So we can't really detect the difference :(
It seems we can't really fix this. Either we don't detect MPIO HD300
On Mon, Dec 17, 2007 at 02:34:18PM +, David Spreen wrote:
Package: hal-info
Version: 20071212-1
Severity: minor
Tags: patch
Hello,
unfortunately my external harddisk matches the same usb-vendor ID and
product ID as the MPIO HD300 Music Player. Here is what lshal says:
With the
On Thu, Dec 13, 2007 at 10:21:06PM +0100, Michael Biebl wrote:
[0] I suspect it is 10 times a second, because that's the number of
libata wakeups I see, but I haven't actually checked.
Hal polls the CD drive every 2 seconds afaik.
Hal indeed polls every 2 seconds at most and even less when
On Fri, Dec 14, 2007 at 01:35:15PM +0100, Stefano Costa wrote:
Yes,
it is installed and running:
[EMAIL PROTECTED]:~$ ps ax | grep avahi
6078 ?Ss 0:00 avahi-daemon: running [cycnus.local]
6079 ?Ss 0:00 avahi-daemon: chroot helper
6097 ?Ss 0:00
On Thu, Dec 13, 2007 at 04:58:21PM +0100, Stefano Costa wrote:
Package: avahi-daemon
Version: 0.6.21-4
Severity: normal
Not sure this is the right package to file this bug, however the
problem is that Pidgin and Gajim can no longer use link-local messaging.
Gajim says lost connection and
On Fri, Dec 14, 2007 at 03:59:58PM +0100, Stefano Costa wrote:
What is the output of:
avahi-browse _presence._tcp
[EMAIL PROTECTED]:~$ avahi-browse _presence._tcp
+ eth1 IPv4 [EMAIL PROTECTED] iChat Presence
local
+ eth0 IPv4 [EMAIL PROTECTED]
On Fri, Dec 14, 2007 at 05:18:49PM +0100, Stefano Costa wrote:
On ven, 2007-12-14 at 16:13 +0100, Sjoerd Simons wrote:
Seems like things work fine from an avahi perspective.. When do things go
wrong? As soon as you login or when you try talking to someone else
or?
Also you empathy
On Fri, Dec 14, 2007 at 05:48:53PM +0100, Stefano Costa wrote:
Not sure I have understood well the commands to give.
I have no telepathy-salut executable on my system.
You can find it in /usr/lib/telepathy, without it you can't use link-local xmpp
with empathy ;)
However, running empathy
On Thu, Dec 13, 2007 at 05:48:40PM +, brian m. carlson wrote:
On Sat, May 27, 2006 at 10:56:09AM -0500, Bob Tracy wrote:
Sjoerd Simons wrote:
Unfortunately I don't have an alpha lying around, so i can't reproduce
this :). Afaik an unaligned trap doesn't do any harm, it's just
Package: liboil0.3
Version: 0.3.12-1
Severity: normal
On my arm. If /proc isn't mounted liboil's cpu detection seems to
segv...
#0 0x4027eb38 in strstr () from /lib/libc.so.6
#1 0x40600368 in _oil_cpu_init () at liboilcpu.c:300
#2 0x40600368 in _oil_cpu_init () at liboilcpu.c:300
Backtrace
On Thu, Nov 15, 2007 at 08:31:05PM +0100, Johannes Berg wrote:
I was just reading http://lwn.net/Articles/197603/.
:)
Could you send us the output of
cat /sys/power/disk
and
cat /sys/power/state
Mind you, I'm talking about two systems here. On my
powermac, /sys/power/disk
On Wed, Sep 06, 2006 at 01:38:29AM +0200, Tomáš Janoušek wrote:
Subject: hal: Does not detect SD card any more
Package: hal
Version: 0.5.7.1-1
Severity: important
I plugged my SD card today and it hasn't been mounted. I'm sure it worked a
week or two before, so I think it's caused by the
On Tue, Oct 30, 2007 at 09:45:56AM +1300, Francois Marier wrote:
(Sorry, I forgot to CC the bug on my last email)
On 2007-10-29 at 14:12:06, Michael Biebl wrote:
Have you compiled your kernel without killswitch support (Option
CONFIG_RFKILL)?
They are both compiled in as modules:
On Tue, Dec 04, 2007 at 04:51:10PM +0100, Johannes Rohr wrote:
Package: hal
Version: 0.5.10-4
Followup-For: Bug #448463
I see the same and it is accompanied by a syntax error regarding a
failed test.
I suspect that when line 45 of the script is processed, the variable
DELL_WCTL is not
On Sat, Dec 08, 2007 at 04:23:21PM +0100, [EMAIL PROTECTED] wrote:
Sjoerd Simons wrote:
On Tue, Jun 12, 2007 at 09:42:35AM +0200, [EMAIL PROTECTED] wrote:
Jasen Betts wrote:
I found I was unable to use cdrecord,
lsof revealed that hald-addon-storage had the device open.
I
On Mon, Jun 25, 2007 at 01:42:09AM -0400, Jeffrey Breker wrote:
Ok I've tried sending in the lshal output twice now but I guess its just
getting dropped somewhere (maybe my mail server). So i'm just gonna send in a
link.
http://acadunix.algonquincollege.com/~brek0005/lshal.output
We got
On Fri, Sep 15, 2006 at 11:08:18AM +0200, Cezary Kaliszyk wrote:
Package: hal
Version: 0.5.7.1-2
Severity: important
When hald is running I cannot access my USB-Storage device.
Namely when I insert my USB device I get many dmesg errors:
SCSI device sdb: 1983496 512-byte hdwr sectors
Package: gparted
Version: 0.3.3-6
Severity: normal
Hi,
At runtime gparted creates
/usr/share/hal/fdi/policy/gparted-disable-automount.fdi.. Which in itself is
questionable, but /usr/share/hal is clearly the wrong location.. /usr/share
maybe be mounted read-only and/or shared between
reassign 393794 gparted
forcemerge 434268 393794
On Mon, Oct 22, 2007 at 02:10:56AM -0500, zodman - Andres Vargas wrote:
im delete the /etc/hal/fdi/policy/preferences.fdi
an create new one with:
merge key=volume.ignore type=boolfalse/merge
And fix the bug.
What cause the bug ?
im think
reassign 452909 pm-utils
thanks
On Mon, Nov 26, 2007 at 12:25:14PM +0100, GALLIEN Matthieu wrote:
Le lundi 26 novembre 2007, Sjoerd Simons a écrit :
On Mon, Nov 26, 2007 at 01:49:49AM +0100, Matthieu Gallien wrote:
Package: hal
Version: 0.5.10-2
Severity: normal
Due to the last
On Tue, Jun 12, 2007 at 09:42:35AM +0200, [EMAIL PROTECTED] wrote:
Jasen Betts wrote:
I found I was unable to use cdrecord,
lsof revealed that hald-addon-storage had the device open.
I was unable to kill this process. kill -K 3353 had no effect.
I saw that cdrecord was writing incredibly
On Sat, Sep 15, 2007 at 07:25:39PM +1000, Jason White wrote:
Package: hal
Version: 0.5.9.1-4
Severity: normal
When I added a USB drive to the system, Hald segfaulted (see the kernel logs
exerpted below). Since I don't access USB drives under X or Gnome, this bug
has no real impact on me; I
On Wed, Nov 28, 2007 at 09:07:11AM +1300, Francois Marier wrote:
Package: hal
Version: 0.5.10-3
Severity: normal
I'm not sure exactly what's causing this, but I get a lot of these errors in
my logs:
NetworkManager: info Error getting killswitch power:
On Fri, Oct 26, 2007 at 10:24:40AM -0400, Alter Ego wrote:
I have the exact some bug.
This bug only exists in Debian Lenny, not in Debian Etch.
Version 0.5.9.1-6 of hal also suffers from the some bug.
What happens is that a new volume becomes avaible, which gnome-volume-manager
On Sat, Dec 08, 2007 at 09:37:51PM +0100, Benoît Dejean wrote:
Le samedi 08 décembre 2007 à 19:24 +, Debian Bug Tracking System a
écrit :
A similar fix was merged upstream some time ago. Closing this bug.
I'm blocking on 452367 so i (and ppc users) can't upgrade.
AFAIR, this fix
On Fri, Dec 07, 2007 at 12:15:26PM +0100, Adrian von Bidder wrote:
Package: hal
Version: 0.5.10-4
Severity: minor
Hi!
This is about the (not exactly new)
+--
| Dec 7 12:10:03 localhost NetworkManager: info Error getting killswitch
| power:
301 - 400 of 923 matches
Mail list logo
