smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION === Model Family: Fujitsu MHV series Device Model: FUJITSU MHV2060AT Serial Number: NS12T5425FGT Firmware Version: 00000096 User Capacity: 60,011,642,880 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a Local Time is: Wed Aug 25 18:23:49 2010 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 410) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 52) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 17877 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 23724032 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 152 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 3 (1999, 1) 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2120 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0 9 Power_On_Seconds 0x0032 064 064 000 Old_age Always - 18467h+05m+52s 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 150 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 62 193 Load_Cycle_Count 0x0032 071 071 000 Old_age Always - 594291 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 17/40) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 12 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 3 (1, 7024) 197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 2 198 Offline_Uncorrectable 0x0010 098 098 000 Old_age Offline - 5 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 448 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 1533276520374 SMART Error Log Version: 1 ATA Error Count: 300 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 300 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 98 63 ec e0 08 8d+22:56:56.208 READ DMA f8 00 00 00 00 00 e0 08 8d+22:56:56.208 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 0a 8d+22:56:56.200 IDENTIFY DEVICE ef 03 42 00 00 00 a0 0a 8d+22:56:56.192 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 08 8d+22:56:56.192 READ NATIVE MAX ADDRESS Error 299 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 98 63 ec e0 08 8d+22:56:50.937 READ DMA f8 00 00 00 00 00 e0 08 8d+22:56:50.937 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 0a 8d+22:56:50.928 IDENTIFY DEVICE ef 03 42 00 00 00 a0 0a 8d+22:56:50.921 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 08 8d+22:56:50.921 READ NATIVE MAX ADDRESS Error 298 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 98 63 ec e0 08 8d+22:56:45.662 READ DMA f8 00 00 00 00 00 e0 08 8d+22:56:45.661 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 0a 8d+22:56:45.653 IDENTIFY DEVICE ef 03 42 00 00 00 a0 0a 8d+22:56:45.646 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 08 8d+22:56:45.646 READ NATIVE MAX ADDRESS Error 297 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 98 63 ec e0 08 8d+22:56:40.391 READ DMA f8 00 00 00 00 00 e0 08 8d+22:56:40.390 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 0a 8d+22:56:40.382 IDENTIFY DEVICE ef 03 42 00 00 00 a0 0a 8d+22:56:40.375 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 08 8d+22:56:40.374 READ NATIVE MAX ADDRESS Error 296 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 98 63 ec e0 08 8d+22:56:35.107 READ DMA f8 00 00 00 00 00 e0 08 8d+22:56:35.107 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 0a 8d+22:56:35.099 IDENTIFY DEVICE ef 03 42 00 00 00 a0 0a 8d+22:56:35.091 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 08 8d+22:56:35.091 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 18467 15491995 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org