Package: qv4l2
Version: 1.16.3-3
Severity: grave
Justification: renders package unusable
Dear Maintainer,
When i do a video capture which qv4l2 I do not the sound of the video. The
device is EM2860/SAA711x, driver em28xx. Same problem when using ffmpeg and
mencoder. The sound system is "pulseaudio" Using all other video capture the
problem is the same.Using jessy, stretch, and bullseye i get the same fail.
Here under somes messages from dmesg and others:
dmesg | tail -30
em28xx 2-10.1.4:1.0: Remote control support is not available for this card.
[ 11.774061] em28xx: Registered (Em28xx Input Extension) extension
[ 11.946320] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 11.946349] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 15.710318] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 39.739228] do_trap: 21 callbacks suppressed
[ 39.739230] traps: light-locker[2619] trap int3 ip:7fa936d84c75
sp:7fff3d59c5d0 error:0 in libglib-2.0.so.0.5800.3[7fa936d4c000+7e000]
[ 41.494844] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated
for card #1. Suggest a bigger bdl_pos_adj.
[ 113.152706] usb 4-3.2: new SuperSpeed Gen 1 USB device number 5 using
xhci_hcd
[ 113.173134] usb 4-3.2: New USB device found, idVendor=2537, idProduct=1068,
bcdDevice= 1.00
[ 113.173135] usb 4-3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 113.173136] usb 4-3.2: Product: NS106X
[ 113.173136] usb 4-3.2: Manufacturer: Norelsys
[ 113.173137] usb 4-3.2: SerialNumber: 0123456789ABCDE
[ 113.175201] usb 4-3.2: UAS is blacklisted for this device, using usb-storage
instead
[ 113.175202] usb-storage 4-3.2:1.0: USB Mass Storage device detected
[ 113.175285] usb-storage 4-3.2:1.0: Quirks match for vid 2537 pid 1068:
800000
[ 113.175319] scsi host10: usb-storage 4-3.2:1.0
[ 115.697991] scsi 10:0:0:0: Direct-Access ATA SanDisk SDSSDP12 0
PQ: 0 ANSI: 6
[ 115.698147] sd 10:0:0:0: Attached scsi generic sg11 type 0
[ 115.698324] sd 10:0:0:0: [sdk] 246162672 512-byte logical blocks: (126
GB/117 GiB)
[ 115.698518] sd 10:0:0:0: [sdk] Write Protect is off
[ 115.698519] sd 10:0:0:0: [sdk] Mode Sense: 43 00 00 00
[ 115.698718] sd 10:0:0:0: [sdk] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 115.716632] sdk: sdk1 sdk2
[ 115.717508] sd 10:0:0:0: [sdk] Attached SCSI disk
[ 125.965208] EXT4-fs (sdk1): recovery complete
[ 125.965489] EXT4-fs (sdk1): mounted filesystem with ordered data mode. Opts:
(null)
[ 136.782553] usb 4-3.2: USB disconnect, device number 5
[ 791.949656] snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated
for card #2. Suggest a bigger bdl_pos_adj
root@buster:~# aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: HDMI [HDA Intel HDMI], périphérique 3: HDMI 0 [HDMI 0]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: HDMI [HDA Intel HDMI], périphérique 7: HDMI 1 [HDMI 1]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: HDMI [HDA Intel HDMI], périphérique 8: HDMI 2 [HDMI 2]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: HDMI [HDA Intel HDMI], périphérique 9: HDMI 3 [HDMI 3]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: HDMI [HDA Intel HDMI], périphérique 10: HDMI 4 [HDMI 4]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 1: PCH [HDA Intel PCH], périphérique 0: ALC1150 Analog [ALC1150 Analog]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 1: PCH [HDA Intel PCH], périphérique 1: ALC1150 Digital [ALC1150 Digital]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 2: NVidia [HDA NVidia], périphérique 3: HDMI 0 [HDMI 0]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 2: NVidia [HDA NVidia], périphérique 7: HDMI 1 [HDMI 1]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 2: NVidia [HDA NVidia], périphérique 8: HDMI 2 [HDMI 2]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 2: NVidia [HDA NVidia], périphérique 9: HDMI 3 [HDMI 3]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
root@buster:~# cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7b34000 irq 29
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7b30000 irq 30
2 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf7080000 irq 17
3 [U0xeb1a0x2861 ]: USB-Audio - USB Device 0xeb1a:0x2861
USB Device 0xeb1a:0x2861 at usb-0000:00:14.0-10.1.4, high
speed
root@buster:~# arecord -l
**** Liste des Périphériques Matériels CAPTURE ****
carte 1: PCH [HDA Intel PCH], périphérique 0: ALC1150 Analog [ALC1150 Analog]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 1: PCH [HDA Intel PCH], périphérique 2: ALC1150 Alt Analog [ALC1150 Alt
Analog]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 3: U0xeb1a0x2861 [USB Device 0xeb1a:0x2861], périphérique 0: USB Audio
[USB Audio]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
Here under you will find a command line to capture the video using mencoder:
mencoder tv:// -tv
channel=0:driver=v4l2:device=/dev/video0:normid=20:input=1:chanlist=europe-
west:width=720:height=576:audiorate=48000:alsa:adevice=hw.3:brightness=34:contrast=56:hue=40:saturation=26:amode=1:forceaudio:immediatemode=0
-oac copy -ovc lavc -quiet -lavcopts vcodec=mpeg4:vbitrate=2000 -o
/root/essai123456.avi
MPlayer 1.4 (C) 2000-2019 MPlayer Team
success: format: 9 data: 0x0 - 0x0
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschew...@zpr.uni-koeln.de>
comment: first try, more to come ;-)
Selected device: EM2860/SAA711X Reference Design
Capabilities: video capture VBI capture device audio read/write streaming
supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 =
NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11
= PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 =
SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc;
inputs: 0 = S-Video; 1 = Composite;
Current input: 1
Current format: YUYV
Selected input hasn't got a tuner!
[V] filefmt:9 fourcc:0x32595559 size:720x576 fps:25.000 ftime:=0.0400
libavcodec version 58.35.100 (internal)
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
Movie-Aspect is undefined - no prescaling applied.
[swscaler @ 0x55bdfc76e0c0]bicubic scaler, from yuyv422 to yuv420p using MMXEXT
[swscaler @ 0x55bdfc76e0c0]using unscaled yuyv422 -> yuv420p special converter
videocodec: libavcodec (720x576 fourcc=34504d46 [FMP4])
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
==========================================================================
audiocodec: framecopy (format=1 chans=2 rate=48000 bits=16 B/s=192000 sample-4)
Forcing audio preload to 0, max pts correction to 0.
Writing header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp
header.
Writing header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp
header.
Flushing video frames.
Writing index...
Writing header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp
header.
Video stream: 74.956 kbit/s (9369 B/s) size: 862743 bytes 92.080 secs
2333 frames
Audio stream: 1536.000 kbit/s (192000 B/s) size: 17760000 bytes 92.500 secs
v4l2: 2346 frames successfully processed, -33 frames dropped.
If you need other information mail me, let me me know what i must to do to help
you.
Many Thanks
Jean Pierre
-- System Information:
Debian Release: 10.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.0-8-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE,
TAINT_UNSIGNED_MODULE
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE=fr
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages qv4l2 depends on:
ii libasound2 1.1.8-1
ii libc6 2.28-10
ii libgcc1 1:8.3.0-6
ii libgl1 1.1.0-1
ii libqt5core5a 5.11.3+dfsg1-1+deb10u3
ii libqt5gui5 5.11.3+dfsg1-1+deb10u3
ii libqt5opengl5 5.11.3+dfsg1-1+deb10u3
ii libqt5widgets5 5.11.3+dfsg1-1+deb10u3
ii libstdc++6 8.3.0-6
ii libv4l-0 1.16.3-3
ii libv4lconvert0 1.16.3-3
qv4l2 recommends no packages.
qv4l2 suggests no packages.
-- no debconf information
