Bug#810737: pbuilderrc setting for --bin-nmu-maintainer

Andreas Beckmann dixit: >something: --bin-nmu-maintainer "$DEBFULLNAME <$DEBEMAIL>" (using the Do note that devscripts also supports (and, in some older versions, required, due to bugs) setting DEBEMAIL to the entire stuff. That means you likely need to do something like this: if [[ $DEBEMAIL

Bug#810750: kdevelop-python: FTBFS with python3.5 and no python3.4 installed

Package: kdevelop-python Version: 1.7.0-1 Severity: serious Justification: fails to build from source (but built successfully in the past) Here's the actual failure during configure: -- Found PythonInterp: /usr/bin/python3 (found suitable version "3.5.1", minimum required is "3.0") -- Found

Bug#810755: RM: aegean [mips] -- ROM; builds OK but binaries crash on mips

Package: ftp.debian.org Severity: normal Recently introduced build time tests have revealed that the mips binaries don't work even if they are compiled with no obvious error message. As the maintainer, I have removed mips from the list of supported archs and I am kindly asking to remove previous

Bug#793900: FTCBFS: uses build arch compiler

Control: tag -1 +pending On Tue, Jul 28, 2015 at 08:11:40PM +0200, Helmut Grohne wrote: > + CC = $(DEB_HOST_GNU_TYPE)-cc FYI, your patch FTBFS - I seem to need to use this instead: CC = $(DEB_HOST_GNU_TYPE)-gcc Cheers, Olly

Bug#810759: cwiid: BD-Uninstallable on kfreebsd-* and hurd-i386 due to libbluetooth-dev

Hi, Sebastian Ramacher wrote: > libbluetooth-dev is only available on linux-any. Hence cwiid is currently > BD-Uninstallable on kfreebsd-* and hurd-i386. Could the B-D on > libbluetooth-dev > be restricuted to linux-any? I just tried: ./configure absolutely requires -lbluetooth, which is only

Bug#810763: python3-uno: Please add support for python3.5

Package: python3-uno Version: 1:5.0.4~rc2-2 Severity: wishlist python3 version 3.5.1-1 just entered unstable, but if I want to upgrade to that version, I'll have to remove python3-uno and because libreoffice depends on python3-uno, I'd have to remove that too. Which of course I don't want to. So

Bug#808873: cron-apt never runs

Hi Please try to enable cron apt through cron.d/cron-apt again. It is obviously disabled that way. Also can you send me the contents of ls -l /usr/sbin/anacron If you execute /etc/cron.daily/cron-apt is it executed then? I´m asking as some system do not allow execution on all directories. What

Bug#810759: cwiid: BD-Uninstallable on kfreebsd-* and hurd-i386 due to libbluetooth-dev

Source: cwiid Version: 0.6.00+svn201-3.2 Severity: important libbluetooth-dev is only available on linux-any. Hence cwiid is currently BD-Uninstallable on kfreebsd-* and hurd-i386. Could the B-D on libbluetooth-dev be restricuted to linux-any? Cheers -- Sebastian Ramacher signature.asc

Bug#809184: "aptitude changelog" aborts with "Illegal instruction"

Control: tags -1 - unreproducible + wontfix Control: close -1 Hi Bjarni, 2015-12-29 23:11 To Bjarni Ingi Gislason: 2015-12-29 17:48 Bjarni Ingi Gislason: On Mon, Dec 28, 2015 at 10:25:07AM +0800, Paul Wise wrote: On Mon, 28 Dec 2015 01:57:25 + Bjarni Ingi Gislason wrote:    aptitude

Bug#810681: heimdal-clients: installing package forces krb5-user to be removed

Russ Allbery writes: > My recollection is that it doesn't actually do encryption of the data > transfers, which is obviously something of a problem. I think it only > encrypts the control channel, if that. >From memory: You can have the control channel signed or encrypted or

Bug#810754: ardour: libs/pbd/dmalloc.cc is non-free

Source: ardour Version: 2.8.16+git20131003-4 Severity: serious Justification: Policy 2.1.5 Control: tag -1 jessie As documented in debian/control, the license of libs/pbd/dmalloc.c is * Permission to use, copy, modify, and distribute this software for any * NON-COMMERCIAL purpose and without

Bug#810766: regression: git-sh-prompt: incorrectly determines the upstream for repos produced by recent git svn clone --stdlayout

Package: git Version: 1:2.6.4-1 Severity: normal File: /usr/lib/git-core/git-sh-prompt I recently did a git svn clone of the Planet Debian SVN and I noticed that the normal upstream indicator in the git part of my $PS1 was not working properly. The issue appears to be that the code decides that

Bug#810767: linux-image-3.16.0-4-amd64: kernel crashes with skb_under_panic when trying to use tc_mirred

Package: src:linux Version: 3.16.7-ckt20-1+deb8u2 Severity: important Dear Maintainer, I wanted to use traffic management and fq_codel with my solos adsl pci card and after pokeing around online i found this guide: https://wiki.gentoo.org/wiki/Traffic_shaping Trying it with the 3.16.0-4-amd64

Bug#810681: heimdal-clients: installing package forces krb5-user to be removed

Brian May writes: > Also note that IIRC Kereros protocol used by kftp in heimdal-clients is > a kludge, and likely to have security issues. My recollection is that it doesn't actually do encryption of the data transfers, which is obviously something of a problem. I think it

Bug#810757: how-can-i-help: sort bugs list in removals output

Package: how-can-i-help Version: 11 Severity: minor Tags: newcomer I'm diffing the daily output of `how-can-i-help --old` and I noticed that for packages with multiple RC bugs, the output flips around, with one bug being first on one day and then the other bug the next. This should be easy to fix

Bug#810763: python3-uno: Please add support for python3.5

On Tuesday 12 January 2016 01:02:36 Mattia Rizzolo wrote: > with that upload of python 3.5 as a default (python 3.5 is in unstable > since a long time, actually, what changed a few hours ago is > python-defaults) the python3.5 (part 2) transition just started. with > that a few packages will

Bug#810697: fwupdate: unowned files after purge (policy 6.8, 10.8): /var/cache/fwupdate/done

Thanks, Sure thing. I've staged something in git to clean these up. The directory in /boot/efi isn't owned because it's possible that the /boot/efi partition isn't mounted for some reason. The contents of /boot/efi/EFI/fw are written only by fwupdate as far as I'm aware. I'll clean up that

Bug#810550: grammar and indentation of unmet dependencies message

2016-01-11 00:09 積丹尼 Dan Jacobson: "MAFM" == Manuel A Fernandez Montecelo writes: MAFM> Adding "which" would make it longer, contradictory with the previous MAFM> request. But reducing those 34 blanks to just 2 would more than pay for... Except that there are

Bug#503958: goplay: Please add functionality to search for multiplayer games

Hi, Am 11.01.2016 um 22:30 schrieb Petter Reinholdtsen: > > [Alexander Schmehl 2008] >> It would be cool, if you could somehow search for multiplayer games. > > I agree. Some times I would like to look for multiplayer games to play > with my friends, and it is hard to locate them in Debian. >

Bug#810752: openssl s_server -www does not send a Content-Length header

Package: openssl Version: 1.0.2e-1 Severity: normal openssl s_server -www does not send a Content-Length header. This can be reproduced from the test/certs directory of the openssl source package with: openssl s_server -CAfile rootCA.pem -key rootCA.key -cert rootCA.pem -www and with wget

Bug#810750: Acknowledgement (kdevelop-python: FTBFS with python3.5 and no python3.4 installed)

The relevant test has been updated in git, so it may take a git snapshot to work with python3.5: https://projects.kde.org/projects/extragear/kdevelop/plugins/kdev-python/repository/revisions/master/entry/parser/CMakeLists.txt

Bug#810753: override: genometools:science/optional

Package: ftp.debian.org Severity: normal For some reason the genometools package has been accepted with priority extra. I'd like to request to change the priority to optional because AFAICS it does not depend on a package with priority extra (except faketime as a build time dependency, which

Bug#809459: mwparserfromhell: Please build for all supported python3 versions

I can do this in 2d, but feel free to nmu too! I would appreciate it :) -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

Bug#810756: postgresql-multicorn: FTBFS due to update needed for postgresql 9.5

Package: postgresql-multicorn Version: 1.2.4-1 Severity: serious Justification: fails to build from source (but built successfully in the past) See the build log [1]. Seems easy enough to fix. Error: debian/control needs updating from debian/control.in. Run 'pg_buildext updatecontrol'. If you

Bug#765180: python3-argcomplete: Add binary helpers

On Mon, 13 Oct 2014 21:45:09 +0200 Tshepang Lekhonkhobe wrote: > I'm referring to stuff like: >  > - /usr/bin/activate-global-python-argcomplete > - /usr/bin/register-python-argcomplete >  > These things are available in the Python 2 version of the package. I'd like to second this request. I'm

Bug#810758: RM: ardour [kfreebsd-amd64 kfreebsd-i386] -- ROM; commercial restriction

Package: ftp.debian.org Severity: normal Please remove the out-of-date binary package ardour on kfreebsd-amd64 and kfreebsd-i386. They contain code that with a commercial restriction (see #810754) for details. dak rm -Rn -b ardour -a kfreebsd-amd64,kfreebsd-i386 complained about broken reverse

Bug#810762: debuild: shouldn't call dpkg-architecture for source-only builds

Package: devscripts Version: 2.15.9 Severity: normal Tags: patch I'm using debuild -S to create a source package. debuild calls dpkg-architecture, which in turn tries to call gcc and shows an error. I shouldn't need gcc to build a source package. The variables set by dpkg-architecture aren't

Bug#810748: dracut: jessie version does not mount /usr

Package: dracut Version: 040+1-1 Severity: important In split-/usr configurations, when dracut switches root from the initrd to /sysroot, it must already have mounted sysroot/usr before. Otherwise systemd will be unable to read /etc/os-release (which is a symlink to .../usr/lib/os-release) and

Bug#797702: ITP: grafana -- feature rich metrics dashboard and graph editor

Hi Richard, Whenever possible please maintain meaningful subject. :) On Mon, 11 Jan 2016 02:55:19 PM you wrote: > it seems all dependencies have been packaged. Actually we need to take care of go-macaron packages: http://whiteboard.debian.net/grafana.wb It is a little bit tricky due to

Bug#810591: imagemagick:i386 not configured because /usr/bin/compare-im6 doesn't exist

[don't forget to keep 810...@bugs.debian.org in CC when you reply, we want the information to be public] On Mon, Jan 11, 2016 at 11:27 PM, Guy Durrieu wrote: > Le 11/01/2016 22:52, Vincent Fourmond a écrit : > >> tag 810591 +moreinfo >> thanks >> >> Hello, >> >>

Bug#810751: luarocks uses unzip but doesn't depend on it

Package: luarocks Version: 2.2.0+dfsg-2 Severity: normal 1. Install luarocks in a minimal system (eg a basic docker container) with --no-install-recommends 2. Try to install a rock It fails with: > sh: 1: unzip: not found > > Error: Failed unpacking rock file:

Bug#809287: python-websockets: FTBFS: AssertionError: 1006 != 1005

Source: python-websockets Source-Version: 3.0-1 I forgot to close it in the changelog

Bug#744170: Bug in openssl

According to upstream, it actually seems to be a bug in openssl, which doesn't send a Content-Length header. I've reported it: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810752 -- Vincent Lefèvre - Web: 100% accessible validated (X)HTML -

Bug#809561: jessie-pu: package perl/5.20.2-3+deb8u2

Control: retitle -1 jessie-pu: package perl/5.20.2-3+deb8u3 On Fri, Jan 01, 2016 at 04:16:32PM +, Adam D. Barratt wrote: > Control: tags -1 + confirmed > > On Fri, 2016-01-01 at 14:03 +, Dominic Hargreaves wrote: > > Please find attached a proposed patch for #798727 in perl, which I

Bug#697088: ebtables plugin for netfilter-persistent

I just tried your script and it works well, it has a small typo at line 61, should be ebtables instead of ebtable, also if you use it don't forget to "chmod +x" it! Have attached the corrected version for the lazy bunch. Thank you very much Rik, best regards! Ricardo Manriquez On Sun, 10 Jan

Bug#810763: python3-uno: Please add support for python3.5

On Tue, Jan 12, 2016 at 02:11:44AM +0100, Diederik de Haas wrote: > Are you sure? yes > This is the Depends line from 'aptitude show python3-uno': > Depends: libreoffice-core (= 1:5.0.4~rc2-2), python3 (>= 3.4~), python3 (< > 3.5), > python3.4, libc6 (>= 2.14), libgcc1 (>= 1:3.0), libpython3.4

Bug#810763: python3-uno: Please add support for python3.5

On Tuesday 12 January 2016 01:19:16 Mattia Rizzolo wrote: > > Are you sure? > yes Ok, thanks :-) > that dependecy is genereted automatically at build time. > Actually only libroffice-core is the manually instated dependency, as > you can see from the source control file: Will (try to) check

Bug#810749: grive: Crash at first synchronisation: runtime exception

Package: grive Version: 0.2.0-1.1+b2 Severity: normal hello, the first synchronisation crashes as follows: $ grive -a --- Please go to this URL and get an authentication code: [hidden] --- Please input the authentication code here: [hidden] Reading

Bug#809225: Nice way to solve bugs and segfaults

Bonjour, On 11/01/2016 08:39, Nathael Pajani wrote: > Hi ! > > What a nice way to resolve a bug or segfault. None of my students > ever tried this one yet. > > Should remember it next time someone requests tech support for one of > my products. > I am not sure this message helps anything in

Bug#810760: jessie-pu: package stk/4.4.4-5

Package: release.debian.org Severity: normal Tags: jessie User: release.debian@packages.debian.org Usertags: pu This fixes bug 805549 in jessie. This bug makes the dev package useless in certain conditions. Package is already uploaded to p-u, diff is attached. -- System Information: Debian

Bug#809225: Nice way to solve bugs and segfaults

Hi, On 11/01/2016 23:41, Mehdi Dogguy wrote: > let's focus on the core issue. You're right, thanks for putting us back on tracks. > AFAIK, older versions of Unison cannot work with OCaml 4.02. The latter > has been uploaded last October and we've transitioned all the OCaml stack > to 4.02.3.

Bug#810761: wheezy-pu: package stk/4.4.3-2

Package: release.debian.org Severity: normal Tags: wheezy User: release.debian@packages.debian.org Usertags: pu This update fixes bug 805549 on wheezy. This bug makes the dev package useless for certain uses. Package is uploaded to p-u, diff is attached. Saludos -- System Information:

Bug#810765: ardour: FTBFS[!linux]: depends on cwiid, alsa

Package: ardour Version: 1:4.4~dfsg-1 Severity: normal Tags: patch Hi, ardour has become BD-Uninstallable on kfreebsd and hurd due to Build-Depends: - cwiid, which is linux-specific; - libasound2-dev, which is linux-specific (although kfreebsd has a compatibility wrapper around OSS, I

Bug#810764: RFP: libclassindex-java -- a run-time annotation scanning library for Java

Package: wnpp Severity: wishlist Control: block 742119 by -1 * Package name: libclassindex-java Version : 3.4 Upstream Author : Sławek Piotrowski * URL : https://github.com/atteo/classindex * License : Apache License 2 Programming Lang: Java Description

Bug#810591: imagemagick:i386 not configured because /usr/bin/compare-im6 doesn't exist

tag 810591 +moreinfo thanks Hello, I'm very puzzled by this bug, since, clearly, compare-im6 exists in the package: dpkg-deb -c imagemagick_6.8.9.9-6+b1_i386.deb | grep compare -rw-r--r-- root/root 1745 2015-12-18 11:40 ./usr/share/man/man1/compare-im6.1.gz lrwxrwxrwx root/root

Bug#807463: RFS: pnmixer/0.6.1-1 [ITP] -- Simple mixer application for system tray

control: owner -1 ! control: tags -1 moreinfo little review: please use autoreconf instead of autotools-dev (dh-autoreconf and call dh --with autoreconf) please remove all the comments from rules file and also the two lines below DPKG_EXPORT_BUILDFLAGS = 1 include /usr/share/dpkg/default.mk "

Bug#700045: linphone: account wizard rejects user names starting with a digit (required by sipgate)

Hi Helmut, Helmut Grohne writes: > Start linphone. Click "Options", select "Preferences". Select tab > "Manage SIP Accounts". Click the "Wizard" button. Click "Forward". > Select "I have already a sip account ...". Click "Forward". Enter > arbitray 6 digits into the username

Bug#498067: dh_install wildcard exception mechanism request

Hi! This wishlist was recently brought to my attention, as something that could be added via dh-exec. I have a couple of ideas for the syntax: 1) usr/bin/djview3 => usr/bin/djview3 This is the existing syntax for dh-exec-install-rename, which does a copy behind the scenes. For this feature, it

Bug#634073: Svn launches kwallet

It's two years later now, but subversion 1.9.2 on Debian/stretch still launches stupid kwallet. +1 on setting "password-stores=" to an empty string by default. Cheers!

Bug#810677: nmu: tarantool_1.6.7.551.ga5bafc5-1

Package: release.debian.org Severity: normal User: release.debian@packages.debian.org Usertags: binnmu nmu tarantool_1.6.7.551.ga5bafc5-1 . ANY . unstable . -m "Rebuild against binutils 2.25.90.20160101" Isn't there a way to automate these binNMUs on new binutils snapshots? Andreas

Bug#810656: ifupdown: deadlocks: A start job is running for LSB: Raise network interfaces

tags 810656 + pending thanks On Sun, Jan 10, 2016 at 05:50:05PM -0800, Alan W. Irwin wrote: > I was going to add this additional report to > , but that one > has been closed so apparently I have to start a new bug report for this >

Bug#797623: opensaml2: transition needed for g++-5 ABIs

Control: block 797770 with -1 On Tue, 01 Sep 2015 10:48:28 +0200 Ferenc Wagner wrote: > Hi, > > Thanks for the detailed report. Right now I'm doing urgent work on HA > packages, but once that's done, I'll package new upstream versions of > the whole Shibboleth stack to fix the

Bug#810684: audacity: Freeze during playback

Package: audacity Version: 2.0.6-2+b3 Severity: normal Dear Maintainer, I have a 45 minute mp3 loaded. I was playing bits, moving around near the beginning and playing again. After several times, audacity locked up hard. I attached gdb and dumped the backtrace for each of the active threads.

Bug#810683: nmu: openblas_0.2.15-1 atlas_3.10.2-9

Package: release.debian.org Severity: normal User: release.debian@packages.debian.org Usertags: binnmu Dear Release Team, Please schedule a binNMU of openblas and atlas. The libraries build by these packages contain some binary objects that are taken from lapack (via the liblapack-pic

Bug#741935: Bug#803800: avbin: FTBFS with FFmpeg 2.9

Thanks for the note Andreas. I think for the psychopy package we now have sufficient alternatives that we can live without avbin. best wishes Jon On 07/01/16 22:31, Andreas Cadhalpun wrote: Hi, the next version of FFmpeg is planned to be released this month (and it might be called 3.0 instead

Bug#741223: Simplifying the patch

I believe, the patch can and must be simplified. *Current state*: The current patch creates a subvol called "@" and then makes a lot of code changes to various activities to make sure that all the activities happen on that subvol. The main brtfs volume is mounted and then root directory path (the

Bug#810672: firmware-free should include the ath9k_htc firmware binaries

Package: firmware-free Version: 3.4 Severity: wishlist Hello, According to the upstream commit[1] ath9k_htc version 1.4.0 is free software (and the future versions will be free software as well, obviously). Please add it to this package (and remove from firmware-atheros). There's one important

Bug#810678: dia2code segfaults

Package: dia2code Hello, I've recently started to use dia2code. Apparently, the code is very old and is not maintained anymore. I've found the program to segfaults on several cases, and have corrected these. I've also added the ability to import database diagrams (useful for the SQL

Bug#790762: src:hplip: Many PPD files for postscript drivers are missing in printer-driver-postscript-hp

Hi! On 07/01/2015 05:22 PM, John Paul Adrian Glaubitz wrote: > While setting up a new print server on the network, we noticed that the binary > package printer-driver-postscript-hp is missing the PPDs for many postscript > printers actually supported by hplip. Just saw that hplip was finally

Bug#810666: install of version 0.8.6 remove systemd

severity 810666 normal thanks On Mon, Jan 11, 2016 at 07:12:28AM +0100, Jörg Frings-Fürst wrote: > Package: ifupdown > Version: 0.7.54 > Severity: critical > > ~# apt-get dist-upgrade > Paketlisten werden gelesen... Fertig > Abhängigkeitsbaum wird aufgebaut. > Statusinformationen werden

Bug#810687: mdadm: eats all cpu time on all cores

Package: mdadm Version: 3.3.4-1.1+b1 Severity: normal hello, mdadm eats all CPU time of all cores. This ShouldNotHappen(tm) I had a lvm volume on a disk which failed while I was trying to upgrade the volume to raid1 so my raid configureation is very broken. killing mdadm only helps

Bug#810688: shadowsocks: man page references texinfo documents which don't exist

Package: shadowsocks Version: 2.1.0-1 Severity: normal Hello, when reading shadowsocks(1) man page I get this at the bottom: SEE ALSO The programs are documented fully by Shell Xu and Clowwindy , available via the

Bug#810679: [PATCH] IPv6 broken due with exosip 4

Package: linphone Version: 3.6.1-2.4 Severity: normal Tags: ipv6 patch exosip 4 deprecated eXosip_enable_ipv6() in such a way that it fails silently: https://sources.debian.net/src/libexosip2/4.1.0-2/src/eXconf.c/#L55 As a consequence, when enabling IPv6 in linphone, it tries to bind to an IPv6

Bug#810689: php5.6-cli: unowned symlink after purge (policy 6.8, 10.8): /etc/php/5.6/cli/conf.d/20-opcache.ini -> /etc/php/mods-available/opcache.ini

Package: php5.6-cli Version: 5.6.17+dfsg-1 Severity: important User: debian...@lists.debian.org Usertags: piuparts Hi, during a test with piuparts I noticed your package left unowned files on the system after purge, which is a violation of policy 6.8 (or 10.8):

Bug#799237:

#810675 - upgrading to the latest upstream version fixes this.

Bug#810670: Acknowledgement (mlocate: Using grub-mount dir (/var/lib/os-prober/mount) blocks execution of update-grub)

I think that to solve this problem will be enough to append "fuse.grub-mount" to PRUNEFS variable (/etc/updatedb.conf).

Bug#810676: python-keyring: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11

Package: python-keyring Version: 6.1-1 Severity: grave Justification: renders package unusable Processes using python-keyring 6.1 can no longer run as a daemon - a regression from previous support, causing lava-server to halt all daemon operations. dbus.exceptions.DBusException:

Bug#810674: ITP: golang-github-kolo-xmlrpc -- Implementation of the XMLRPC client protocol in Go

Package: wnpp Severity: wishlist Owner: "Martín Ferrari" * Package name: golang-github-kolo-xmlrpc Version : 0+git20150413.0826b98 Upstream Author : Dmitry Maksimov * URL : https://github.com/kolo/xmlrpc * License : MIT

Bug#810675: New Upstream Version - v0.7.06

Package: duplicity Version: 0.7.05-2 Upstream version v0.7.06 was released 2015/12/07 - would be great to please get an update for it. Would also resolve #799237 and maybe others. Thanks

Bug#810663: Include Device Tree model in reportbug script

Hello, On Sun, Jan 10, 2016 at 09:23:40PM -0800, Martin Michlmayr wrote: > Please note that the strange "echo ... $(cat ..)" construct is > intentional. 'cat /proc/device-tree/model' leads to a strange > character at the end because there's no newline and using echo > gets rid of it. Maybe put

Bug#789931: tag this as wontfix/severity normal

tags 789931 wontfix severity 789931 severity thanks The bug was reported against version 2.2.0 which is outdated, version 3.2.0 now builds find on all architectures that are supported by the insighttoolkit4. On the other hand, the bug reports build failure on arm64 - this is an arch that is

Bug#810691: backuppc: unowned files after purge (policy 6.8, 10.8): /etc/backuppc/{htpasswd, pc}

Package: backuppc Version: 3.3.1-2 Severity: important User: debian...@lists.debian.org Usertags: piuparts Hi, during a test with piuparts I noticed your package left unowned files on the system after purge, which is a violation of policy 6.8 (or 10.8):

Bug#810655: libembperl-perl: post-installation script returned error

On Mon, Jan 11, 2016 at 02:32:36AM +0100, Rosario Maddox wrote: > Package: libembperl-perl > Version: 2.5.0-4 > Severity: grave > Justification: renders package unusable > > Dear Maintainer, > >* What led up to the situation? > > Tried to install it: > > Reading package lists... Done >

Bug#810686: Creepy: Add Youtube plugin?

Package: creepy Version: 1.3-1 Severity: wishlist According to https://code.google.com/p/gdata-issues/issues/detail?id=4234 >, there is a API on Youtube to find videos by location. The URL https://gdata.youtube.com/feeds/api/videos?v=2=json=51.7248487,-1.2328819!=1km > is supposed to be

Bug#808581: chromium: reactivate NPAPI option

Hello, I have gnome-shell-extensions package. But this is not an alternative of the web functionalities. Regards, Pierre Crescenzo mailto:pie...@crescenzo.nom.fr http://www.crescenzo.nom.fr/

Bug#810602: ITP: argon2 -- memory-hard hashing function

On Monday, January 11, 2016 08:57:23 AM Paul Wise wrote: > On Sun, Jan 10, 2016 at 8:03 PM, Luca Bruno wrote: > > Argon2 is a password-hashing function that can be used to hash passwords > > for credential storage, key derivation, or other applications. > > It might be better to move to

Bug#810673: proposed RM: mountall -- RoQA; only used by upstart which was removed

Package: mountall Version: 2.54 Severity: serious Tags: sid upstart was removed from Debian and Michael Biebl pointed out that the "mountall" tool was only packaged for use with it. So it should probably be removed as well. Besides upstart, apt-cache rdepends shows only cgroupfs-mount, but the

Bug#806844: unattended-upgrades: needs to be rebuilt with fixed debhelper

Followup-For: Bug #806844 Control: tag -1 pending no-change rebuild NMU uploaded to DELAYED/2 Andreas

Bug#810131: RM: python-pygithub [all] -- NBS; renamed to python-github

-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi ftpmasters! >> > This is already on the cruft report. Once the rdepends are fixed, > this will be taken care of automatically. > well, actually it used to be automatically handled, but something is preventing it to disappear. I have the

Bug#810680: Poweroff not working on QNAP: POWER_RESET=y missing

Package: linux Version: 4.3.3-5 Tags: patch I finally figured out why poweroff is not working on QNAP devices despite the fix I mentioned in #807696 recently. POWER_RESET is not enabled, so POWER_RESET_QNAP is not built in. I also enabled POWER_RESET_GPIO since that's needed by some Kirkwood

Bug#810131: RM: python-pygithub [all] -- NBS; renamed to python-github

On Mon, Jan 11, 2016 at 10:41:16AM +0100, Gianfranco Costamagna wrote: > > This is already on the cruft report. Once the rdepends are fixed, > > this will be taken care of automatically. > > > > well, actually it used to be automatically handled, but something is > preventing it to disappear. >

Bug#810681: heimdal-clients: installing package forces krb5-user to be removed

Package: heimdal-clients Version: 1.6~rc2+dfsg-9 Severity: important Dear Maintainer, I am trying to install the heimdal-clients package because it contains some "kerberised" applications that do not exist in the MIT equivalent package: krb5-user. However, installing heimdal-clients would force

Bug#810685: [apt] apt has no bash-completion

Package: apt Version: 1.1.10 Severity: wishlist --- Please enter the report below this line. --- apt-get has full bash completion, but sadly, apt has none. It will be great if apt command will gain bash completion. Thanks. BogDan.

Bug#790762: src:hplip: Many PPD files for postscript drivers are missing in printer-driver-postscript-hp

On 01/11/2016 11:23 AM, Didier 'OdyX' Raboud wrote: >> While setting up a new print server on the network, we noticed >> that the binary package printer-driver-postscript-hp is missing >> the PPDs for many postscript printers actually supported by >> hplip. > > It's not. These are now

Bug#810682: libncarg-dev: unsatisfiable Depends: ncl-narg

Package: libncarg-dev Version: 6.3.0-5 Severity: serious User: debian...@lists.debian.org Usertags: piuparts Hi, during a test with piuparts I noticed your package is no longer installable in sid: unsatisfiable Depends: ncl-narg Did you mean ncl-ncarg? Cheers, Andreas

Bug#777791: ball: ftbfs with GCC-5

Hello Andreas, hello list(s), I tried to reproduce this build failure on a current sid and investigate a bit. On my machine it outputs the same basic error messages (although the line numbers in the basic_string template file are a bit different). I try to quote the error message partially so

Bug#810690: php7.0-cli: unowned symlinks after purge (policy 6.8, 10.8): /etc/php/7.0/cli/conf.d/20-{json, opcache}.ini -> /etc/php/mods-available/*.ini

Package: php7.0-cli Version: 7.0.2-1 Severity: important User: debian...@lists.debian.org Usertags: piuparts Hi, during a test with piuparts I noticed your package left unowned files on the system after purge, which is a violation of policy 6.8 (or 10.8):

Bug#810758: RM: ardour [kfreebsd-amd64 kfreebsd-i386] -- ROM; commercial restriction

Hi, Sebastian Ramacher wrote: > Please remove the out-of-date binary package ardour on kfreebsd-amd64 and > kfreebsd-i386. They contain code that with a commercial restriction (see > #810754) for details. I've created a patch to fix the FTBFS: https://bugs.debian.org/810765 Feel free to RM the

Bug#810579: nss: FTCBFS: defines LINUX based on uname

Helmut Grohne wrote: > [...] However specifying that macro still makes "#if > defined(LINUX)" succeed despite __linux__ not being defined. Given that > the present patch does not work, I am removing the patch tag. Please add > it back if you add another patch. Thanks Helmut, sorry about that! I

Bug#810550: grammar and indentation of unmet dependencies message

All I know is I would write that as libghc-crypto-cipher-tests-dev: Depends: libghc-hunit-dev-1.2.5.2-0c3b7 which is a virtual package and is not provided by any available package. Depends: libghc-quickcheck-dev-2.7.6-8f38a which is a virtual package and is not provided by any available

Bug#809324: severity?

I think the serverity of this bug should be raised, although im not sure the package upgraded at all from what im reading Had I read this bug, I would had not upgraded :( Do we have to open another bug against the kernel or something? The workaround is to keep the kernel 4.2.0-1 around for a

Bug#810774: ftp.debian.org: RM: vidalia -- RoM; unmaintained upstream, buggy, Qt4

Package: ftp.debian.org Severity: normal Hi, it seems that I forgot to explicitly request the removal from experimental back when I asked for the package removal in #796299. So, please also remove vidalia from experimental. Thanks in advance! Cheers, -- intrigeri

Bug#810779: ifquery segfaults when interface cannot be locked

Package: ifupdown Version: 0.8.6 Tags: patch User: ubuntu-de...@lists.ubuntu.com Usertags: origin-ubuntu ubuntu-patch xenial Hello, In https://launchpad.net/bugs/1532722 it was reported that since per-interface locking was introduced, ifquery sometimes crashes here: | #1 0x00013032 in strncpy

Bug#810780: lintian: license-problem-php-license is wrong when source comes from pecl.php.net

Package: lintian Version: 2.5.39.1 Severity: normal Dear Maintainer, license-problem-php-license is mostly wrong as it is. The last agreement with FTP Masters was that PHP license is OK when the sources some from PECL repository. Could you please modify the check to look for: Source:

Bug#805824: Team maintenance in Debian Science for pdl? (Was: pdl: Fails to build with GSL 2)

Hi Henning, since it would be great to fix #805824 soon which seems pretty easy considering the patch I would like to offer an NMU. However, it would be even more sensible to move the package under Debian Science team maintenance and maintain it in Debian Science Git since it is part of several

Bug#802284: closed by Guido Günther <a...@sigxcpu.org> (Re: [PATCH] gbp rpm: mock chroot builder)

On Tue, Jan 12, 2016 at 05:38:47PM +1100, Ben Finney wrote: > Control: reopen -1 > Control: found -1 git-buildpackage/0.7.1 > > On 08-Jan-2016, Debian Bug Tracking System wrote: > > This is an automatic notification regarding your Bug report > > which was filed against the git-buildpackage

Bug#807190: please upload cnrun2-2.0.2 (fixes #807190)

Yaroslav et al, There was indeed a bug in 2.0.2. I used to think that modern C++ is so strict that once you get your stuff to compile with -Werror, it will fly. I might have to reconsider this assumption, though.. That said and fixed, here's

Bug#741223: Simplifying the patch

On Tuesday 12 January 2016 01:04 AM, Petter Reinholdtsen wrote: > [Sunil Mohan Adapa] >> With the proposed approach, we will have both the ways to mount and use, >> that is, revert to an older snapshot. >> >> 1) Use 'btrfs set-default' to set the default subvolume and reboot. >> >> 2) Change the

Bug#810776: Please update golang-x-text to latest upstream version

Package: golang-x-text Owner: Tim Potter X-Debbugs-CC: pkg-go-maintain...@lists.alioth.debian.org Severity: wishlist In updating golang-google-grpc-dev, it turns out that one of the dependencies, golang-x-text also needs to be updated to the latest upstream version. Thanks,

Bug#810778: fancontrol: sensor detection order can change and invalidate /etc/fancontrol

Package: fancontrol Version: 1:3.3.5-2 Severity: normal Tags: patch Now and again, Jessie detects the sensors on my mainboard (Asus M5A99FX-Pro R2.0) in a different order. This change in order requires that /etc/fancontrol be editted to account for the change before the fans can be controlled.

  1   2   3   >