On Sun, Sep 11, 2005 at 08:58:12PM -0300, Eduardo Trápani wrote:
Hi!
I'd like to install debian onto an iMac G5, but im not sure where to start.
Whats the best way to install debian from scratch?
Do i just use the debian-installer powerpc rc3 cdrom?
No, that will not work.
In any
On Sat, Sep 10, 2005 at 09:36:50PM +0200, Sven Luther wrote:
Hello,
I have made available backport packages of the linux-2.6 common kernels for
powerpc for sarge. You will find all that is needed at :
http://people.debian.org/~luther/kernel
or the apt source :
deb
For some reasons my 12 Powerbook does not provide enough energy to
the USB device.
I have an external hard-drive, 80 GB USB 2.0, that has two connecting
cables. It usually works fine with just the connection cable on a
desktop with a USB 2, but if you have only a USB 1 or you have a
particular
On Mon, Sep 12, 2005 at 04:50:33PM +0900, Horms wrote:
On Sat, Sep 10, 2005 at 09:36:50PM +0200, Sven Luther wrote:
Hello,
I have made available backport packages of the linux-2.6 common kernels for
powerpc for sarge. You will find all that is needed at :
On Mon, Sep 12, 2005 at 11:00:56AM +0200, Sven Luther wrote:
On Mon, Sep 12, 2005 at 04:50:33PM +0900, Horms wrote:
On Sat, Sep 10, 2005 at 09:36:50PM +0200, Sven Luther wrote:
Hello,
I have made available backport packages of the linux-2.6 common kernels
for
powerpc for sarge.
On Mon, Sep 12, 2005 at 06:13:24PM +0900, Horms wrote:
On Mon, Sep 12, 2005 at 11:00:56AM +0200, Sven Luther wrote:
kernel-package (= 8.135) [!powerpc] | kernel-package (= 8.135.sarge1)
[powerpc]
I did another change, but maybe it was not needed, so i think the above is a
safe bet.
Hi,
They are at :
http://people.debian.org/~luther/xorg
Please test them out and provide feedback :)
Friendly,
Sven Luther
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Sep 12, 2005 at 11:37:59AM +0200, Sven Luther wrote:
On Mon, Sep 12, 2005 at 06:13:24PM +0900, Horms wrote:
On Mon, Sep 12, 2005 at 11:00:56AM +0200, Sven Luther wrote:
kernel-package (= 8.135) [!powerpc] | kernel-package (= 8.135.sarge1)
[powerpc]
I did another change,
Op maandag 12 september 2005 11:52, schreef Sven Luther:
Hi,
They are at :
http://people.debian.org/~luther/xorg
Please test them out and provide feedback :)
Friendly,
Sven Luther
Does these packages also contain the experimental drivers from the
http://r300.sourceforge.net/
On Mon, 12 Sep 2005 11:04:25 +0200
Federico 'Pain' Pistono [EMAIL PROTECTED] wrote:
For some reasons my 12 Powerbook does not provide enough energy to
the USB device.
I have an external hard-drive, 80 GB USB 2.0, that has two connecting
cables. It usually works fine with just the connection
Boa Dia! eu sou o Ricardo e estou me formando em Ciencias da Computação pela Faculdade de Brasília-DF, sou amante do Debian e gostaria de instala-ló em um PowerPC 6360 em uma escola (escola que estou fazendo o meu projeto
final). Os PowerPC contam com OldWord. Eu consegui criar os disquetes de
Sven Luther wrote:
Please test them out and provide feedback :)
Hi Sven,
I've tested your packages. In 2D, everythings seem ok but in 3D glxgear
reports :
- ~670 fps with 6.8.2.dfsg.1-6 0
- ~160 fps with 6.8.99.900.dfsg.1-0pre1 0
:'(
Sincerely,
Yannick
--
To UNSUBSCRIBE,
On Sun, Sep 11, 2005 at 07:34:06PM +1000, James Ballantine wrote:
I've been running cpufreqd for the last few days with full logging
enabled. the system powered off just now - I don't see anything
anomalous in /var/log/syslog (and no mention of frequency changes).
...
I've now disabled
Yannick Roehlly wrote:
I've tested your packages. In 2D, everythings seem ok but in 3D glxgear
reports :
Ooops, I forgot to say it is on an ibook (late 2004 rev) with a Radeon 9200.
Here comes the Xorg log, I noted various strange things (sorry I don't have
a correct log to compare):
Line
Ricardo,
Tenho dois Macs com instalações Debian funcionando. Um iMac onde tudo foi muito
fácil e um Performa 6230(NuBus), que deu um trabalhão mas hoje funciona
super-bem
como roteador.
Os dois endereços abaixo me foram muito úteis. O CD que há no endereço de cima
contém ferramentas que podem
through my eyes
Joan Evans
Katrina.doc
Description: Binary data
On Mon, Sep 12, 2005 at 01:49:28PM +0200, Matthias Grimm wrote:
On Mon, 12 Sep 2005 11:04:25 +0200
Federico 'Pain' Pistono [EMAIL PROTECTED] wrote:
For some reasons my 12 Powerbook does not provide enough energy to
the USB device.
I have an external hard-drive, 80 GB USB 2.0, that has
On Mon, Sep 12, 2005 at 01:46:36PM +0200, Pim Snel wrote:
Op maandag 12 september 2005 11:52, schreef Sven Luther:
Hi,
They are at :
http://people.debian.org/~luther/xorg
Please test them out and provide feedback :)
Friendly,
Sven Luther
Does these packages also contain
On Mon, Sep 12, 2005 at 04:20:53PM +0200, Yannick Roehlly wrote:
Yannick Roehlly wrote:
I've tested your packages. In 2D, everythings seem ok but in 3D glxgear
reports :
Ooops, I forgot to say it is on an ibook (late 2004 rev) with a Radeon 9200.
Here comes the Xorg log, I noted
On Mon, 12 Sep 2005 22:00:21 +0200
Sven Luther [EMAIL PROTECTED] wrote:
Hehe, i got a nice usb+firewire 2.5 housing which had 2 usb connectors, one
for dat transfer, and the second plugged into the power adapter of the
housing, so you get the 5W you need for that :)
I never heard about this
On Mon, Sep 12, 2005 at 10:20:43PM +0200, Matthias Grimm wrote:
On Mon, 12 Sep 2005 22:00:21 +0200
Sven Luther [EMAIL PROTECTED] wrote:
Hehe, i got a nice usb+firewire 2.5 housing which had 2 usb connectors, one
for dat transfer, and the second plugged into the power adapter of the
On Mon, 2005-09-12 at 13:46 +0200, Pim Snel wrote:
Op maandag 12 september 2005 11:52, schreef Sven Luther:
Hi,
They are at :
http://people.debian.org/~luther/xorg
Please test them out and provide feedback :)
Friendly,
Sven Luther
Does these packages also contain the
does this in anyway affect nvidia performance, as in OpenGL is up for testing?
(i have the GeForce Go5200)
Friendly
Kasper
On 9/12/05, Sven Luther [EMAIL PROTECTED] wrote:
Hi,
They are at :
http://people.debian.org/~luther/xorg
Please test them out and provide feedback :)
Hi,
I've a powerbook aluminium with the canadian french keyboard layout. I
run Debian testing.
Everything was working perfect, I had almost every key in KDE as it was
supposed to be the à, ç, è. I think I was using the ca_enhanced. With
XFree I'm using the us layout.
But now, something has
On Sat, Sep 10, 2005 at 09:36:50PM +0200, Sven Luther wrote:
Hello,
I have made available backport packages of the linux-2.6 common kernels for
powerpc for sarge. You will find all that is needed at :
http://people.debian.org/~luther/kernel
or the apt source :
deb
25 matches
Mail list logo
