Hello,
FYI - I remember seeing some posts that indicated that the
CD that was shipped with this book has problems. I
do not know what the grub prompt is all about though.
Debian 2.1 is what I run on my Thinkpad 560, but a friend
copied the CDs for me, from the official ones.
John
From:
Hi,
I really do not want to re-install from scratch again! I had
E+Esound working, with the ~vincent updates. When I started to
build the Epplets-Base, it needed esd.h which was not provided
in the esound 0.2.14 debian package. I found that it was included
as well as some other need stuff,
Hi,
FYI - I fixed it! In case anyone else ever gets into this
boat, do a make uninstall in the (tarball) 0.2.8 directory, then
dpkg -r --force-depends esound. Then re-install the esound
deb package, and things will work again.
Whew,
John Miskinis
Hi,
Below I included the find command that will allow you to look
for libraries, as well as where the libXt is on my system...
debian:~# find /usr/X11R6/ -name libXt.* -print
/usr/X11R6/lib/libXt.so
/usr/X11R6/lib/libXt.so.6.0
/usr/X11R6/lib/libXt.so.6
debian:~#
From: Robert L. Harris
Hello,
I have had seen this problem a few times. A reboot always
cured it, if that is an option...
John Miskinis
wim Nope, restarting Netscape doesn't resolve the issue, and this happens
on every
wim link on every site I go to...
__
Get
Hi,
Yes, just create a .emacs file and put your commands in them.
Below are some of my commands, which you can use as a guide to
bind keys and make editing life a lot easier. I would include my
whole file, but some things changed a little between V19 and V20.
I now invoke emacs with emacs -font
) If there is a package I need to install to get the
RGetXImage symbol defined? I'd rather use the prebuilt wmaker.
2) The names of the packages I need to get the right jpeg
libraries, so I can recompile?
As always, many thanks for any info/clues,
John Miskinis
Hi,
I have only installed netscape 4.5 , on slink, and never had
to download it by hand. I used apt-get as follows:
apt-get install communicator-smotif-45
apt-get install netscape-java-45
You will only need the second package if you wish to run java.
My sources.list in case I have
Hello,
First, If there is a better way, PLEASE let me know! I'm trying to
move a working boot floppy to a partition to test it without having
to keep uncompressing/compressing/writing-floppy each time.
I'm trying to build a very small 1-floppy linux system, that I can use
to boot, and access
Hello,
Since my last message, I am actually able to boot up, in single
user mode, if I specify rescue single at the lilo prompt. So
I think I am getting closer. Now I am stumped, df says the root file
system is /dev/ram but appears to actually be my 17 Meg hard
disk partition.
I (re)read the
Hello,
I have always seen this problem under slink, I am running GTK 1.2
also. The text that is doubled or shadowed always seems to
be text on buttons that are grayed out and not selectable.
I tried a few thems and fonts, but the problem remains. Although
it is very ugly, it doesn't cause any
So How do I make this epplet that gives me the error to not
be started ?
Hello,
I have had problems with epplets coming back, sometimes many
copies of them at once. Deleting the files under .enlightenment
doesn't get rid of them, so when I want to start clean, I
simply rename the directory
Thanks for your reply. I will try it :)
The logout thing might be interesting. I usually
just do init 0 as root to turn of my machine.
The CTRL-ALT-DELETE is basically the same as selecting the
Logout option from the mouse button 1 menu. I wanted to add
another note, that someone on #E
Hi,
write(2, Error on Play Event\n, 20Error on Play Event
Not sure if your problem is very simple, but I've seen this
message when 1) the sound set for the event does not exist
and 2) when the /dev/dsp device is open by some other process
maybe it was wmscope.
I'm not sure what your
Hi,
Attached is my latest config file for the dual scan 560. Note
the comments with the JM. It will work as is without flicker,
but FVWM2 will not work correctly. Feel free to switch to
the other modeline to use fvwm but with flicker.
Enjoy and post results,
John Miskinis
a few window drags. Never figured out why.
John Miskinis
__
Get Your Private, Free Email at http://www.hotmail.com
Hi David,
I am running slink also. I wouldn't say straight slink as I
have done MANY apt-get(s) for packages that put other packages
on etc., too many for me to keep track of, so I don't...
I got the 1.2 JDK running a few weeks ago, but after some reading
I got the impression the pre-release
annoying.
End result, I now run wmaker, no problems at all
with the dock apps.
It is too bad. I thought I was alone with this problem.
John Miskinis
__
Get Your Private, Free Email at http://www.hotmail.com
).
Any links, information, caveats, good/bad experiences welcome. I'm
hoping others have walked this path before...
Many Thanks,
John Miskinis
__
Get Your Private, Free Email at http://www.hotmail.com
--
Unsubscribe? mail -s unsubscribe
for the various models,
please let me know!
Thanks, and good luck, linux runs very well on Thinkpads,
John Miskinis
__
Get Your Private, Free Email at http://www.hotmail.com
.
If you are running potato, I would read the READMEs in the
directories, as you may want the pre-release 2.
John Miskinis
__
Get Your Private, Free Email at http://www.hotmail.com
the main package(s).
Any links, information, caveats, good/bad experiences welcome. I'm
hoping others have walked this path before...
Many Thanks,
John Miskinis
__
Get Your Private, Free Email at http://www.hotmail.com
Hello David,
I wish to connect my old Atari ST to my linux box running slink with a
serial
cable and use it basically as a dumb terminal.
Could someone please point me in the direction of some useful documentation
as
to how to do this. Also does anyone know what software would be required
Hello,
The system boots and reboots OK. I've been playing around with bash
commands. Not all of the ones I read about on Web pages seem to be
working. Now I want to run dbootstrap to configure my base system. But
when I type dbootstrap at the $ prompt, I get command not found. I go
to the
Hello,
I figured it out. The widgets used in the Xt examples are not
from any standard widget set. They are presented in chapter 10
of the 900+ page book.
John
__
Get Your Private, Free Email at http://www.hotmail.com
Hello,
Did anyone get E installed? When I do an apt-get install
enlightenment
YES, I got it working well on slink, with apt-get. I have included
my sources.list below. I think I got the ~vincent pointers from
gnome.org, can't remember. Also, I may have reordered the last 2
lines to the
Hello,
I run E on a Pentium 100 w 24 Mb RAM. As far as the colors
not going together, you can change the appearance of the
gnome applications, by changing the GTK themes. The gnomecc
application makes installing and changing themes quite easy. You
can also preview them, and try them right
Hello,
I'm trying to get a full X Development system put together
based on slink. I am trying to get some simple XT examples to
compile. (although I have lesstif and GTK working nicely)
There is no Pushbutton.h file on my system anywhere, although
in the Xaw directory Box.h and Label.h
Hello,
Pardon my ignorance. Up until now, I have used a command such
as dpkg -l *|grep -i WHATEVER when I am trying to find out the
package name(s) of things relating to WHATEVER. At the moment, I
am trying to find out what pieces of imlib stuff I might be
missing, as I can't compile
errors, how to fix?
Date: Thu, 25 Nov 1999 09:51:25 +1030
On Tue, Nov 23, 1999 at 11:32:50PM -0800, John Miskinis wrote
Hello,
Ever since I installed enlightment (really cool), I get these
errors whenever I install anything...
Update-menus: (checking /var/lib/dpkg/lock)
debian:/home/miskinis
Hello,
For some strange reason wmakerconf now crashes just after
the window appears. I WAS running wmakerconf 1.7 and everything
was working OK. I didn't run it for about a week. All of a sudden
it would crash complaining about a GTK style copy problem, and a
NULL cast to a GTK widget.
Hello,
Ever since I installed enlightment (really cool), I get these
errors whenever I install anything...
Update-menus: (checking /var/lib/dpkg/lock)
debian:/home/miskinis# In file /etc/menu-methods//enlightenment at line
12:
onlyrunasroot=true
^
Unknown identifier
Hello,
It appears there are at least a couple different models of the
ZIP drive for the parallel port. The one I have now does not
work with the PPA support, but works fine with the IMM package.
I always have to use /dev/sda4 to access it.
I recently tried to build a small debian linux system
Hello,
A while back, I was unable to get my ZIP dribe to work with the
PPA support, but IMM support allowed it to work. This IMM support
is in a loadable module. I have been reading the Zip_Install howto,
in preparation to try to get a Linux system built on a ZIP disk, to
allow me to perform a
Hi,
I don't know what let me to think that pon and diald were related.
I probably installed diald a while back in preparation to get PPP
working after I got an ISP that supported PPP. In any case, I don't
think there is anything wrong with any documentation at all. I just
had a lot of new
Hi,
What I meant, was that if it I run with auth than the CHAPS
authentication fails. If I run with noauth, all works OK. I
saw a note in options stating that the auth should not be
disabled, and I'm not sure I should worry about this or not.
I changed this in options prior to rerunning
Hi,
So should I persue trying to get my system to authenticate my
ISP's connection to my machine? Or is this not typically used for
systems that connect TO an ISP?
I'm hoping that it's OK to live without out it, and not open
my system up to possible intrusion.
Thanks again,
John
Hello,
I have recently aquired a PPP-based ISP, in hopes to get linux
network connectivity. I have been working with the PPP howto, and
got PPP somewhat working.
I am stuck at the point where a route -n only shows ONE ppp0
connection, where the howto says it should show TWO. I am able
to ping
Hi,
I noticed that the /dev/modem worked also, but I wanted to be
sure that it was using ttyS2 for now. I am also trying everything
as root for now. I tried pon but it complained about some things
that I have not yet configured (in diald?).
I figured it would be best to get the manual
Hi,
Wow! It was as simple as adding the defaultroute line in my
/etc/ppp/options file! Many thanks!
I tried to send this message using gzilla (from slink), but it
chokes on pages that are too complex. (It doesn't even show me the
navigation buttons in HOWTOs!)
SO, now I am looking for
Hi,
That makes sense, I can see where /dev/modem is useful once things
are working. I did remember seeing a note somewhere (I've been
up all night reading stuff, I forget where) where they discouraged
the use of /dev/modem, and /dev/mouse however!
I'm still accepting recommendations for
Hi,
I had to change the subject line...
OK, I had run pppconfig many hours ago, and at that time I thought
it was tied to diald. When I execute pon now, it will not
connect, but my /etc/chatscripts needs work. Now that I have PPP
working (no authorization and no compression yet) I think I
:09AM -0800, John Miskinis wrote:
Hi,
I'm hoping to find a set of tools that will allow a linux system
to be backed up, and restored, using ZIP disks. I would really
appreciate any advise on this subject, from anyone who has
successfully restored a system from a multi-volume set.
I've
debian-user@lists.debian.org
Subject: Re: Does anyone use ZIP disks to backup/restore their system? How?
Date: Wed, 3 Nov 1999 09:37:07 +0100
On Tue, Nov 02, 1999 at 06:29:45PM -0800, John Miskinis wrote:
Hi,
[...]
This leads me to ask if most people just backup their important
files
Hello,
Perhaps there is an easier/better solution then kbackup/afio? Before
I reinstall from scratch, I would appreciate advice, as it may be
possible to get my system back
I recently used the zdisk utility to successfully build a boot
floopy, with my kernel that has support for my (imm)
Hi,
I'm hoping to find a set of tools that will allow a linux system
to be backed up, and restored, using ZIP disks. I would really
appreciate any advise on this subject, from anyone who has
successfully restored a system from a multi-volume set.
I'm really stuck, trying to figure out
Hello,
I have been trying to make a boot/root disk, so I can have a
kernel boot with support for my ZIP drive, and PCMCIA-SCSI-CDROM
if possible. WOW, I can't believe how hard this is!
To make it easier I shrunk my swap partition size by 17 meg, and
created a spare ext2 partition of 17 meg.
Hi,
Thanks! That was the info I needed. I ran mkswap, and it now
refects the proper size of the swap file during bootup.
I could REALLY use some pointers to sites that have info on how
to create a minimum startup configuration. I have been following
the Bootdisk-HOWTO, but I am left with many
Hello,
I have noticed that when I create a boot floppy with make zdisk
it will boot, but when using make bzdisk it will not. I had to
use the tecra rescue and driver disks when installing, and
I wonder if this is somehow related to the IBM Thinkpad 560.
Or, is there something else going on in
Hi,
(1) It is probably easiest to get the isp stuff working
I only have AOL at the moment. I connect via WIN95, and then
mount by c: as a vfat partition under linux, and move .deb files
that I grab on the net, over to my linux partition.
(2) Is the problem your modem or your isp ?
Hello,
I'm not up to speed on libc6 at all. From what I can gather it
is not just a regular package. I thought I had a HOWTO on this,
but it turned out to be a libc5-libc6 upgrade document.
A while back I tried to get enlightenment-conf up, and I believe
it needed libc6 = 2.1 or some
Hi Brant. It is a Micron model M14FG. It says on back: 115/230V/1A,
60/50hz.
I have tried manually entering 60 for the horiz and 50 for the vert. I have
tried selections that were preconfigured at 60 and 50. I feel like I have
YIKES - That sounds like the power supply specs! BE CAREFUL!
Hi,
Wow, I sent that mail on 9/9/99 (interesting numbers) and since then
I've become a linux nut. Yes, I ended up using the tecra disks. I
think it might have been you that helped me way back then.
The problems I was experiencing were due to the PCMCIA-based CDROM
I had, and I thought it was
Hi,
You might not realize yet that CASE matters on Linux/Unix..
/etc/X11/XF86Config
I think it can be in a couple other places, and in fact I
got hosed this way a few times, as I had files in two places
and couldn't figure out why the changes I made were not being
seen.
I
Hi,
If you must install from floppies, I would use different ones.
When I need a floppy for something, I format it under windows
95, check the full format and no label option. After it
formats, be SURE to check the number of BAD bytes in the info
dialog that appears when the format is done.
If
Hi Stephan,
I have only seen the enlightenment on the slink CD. But when I
checked it out, I think I got around the same problem by running
a program called imlib_config (or something close).
If you type imlibTAB at the prompt, you should see it.
Hope this helps,
John
P.S. I never got
Hello,
I don't suppose you would be so kind as to outline the steps you took?
I really don't hate gnome or anything (prefer it to kde) and might want
to put it back sometime... you sound like you have some experience at
this...
thanks!
I just waded through the dselect package list, hitting -
Hi Folks,
Yesterday I grabbed the viewkit for linux SW from www.viewkit.com
and really would like to get started. The SW came with no examples
or makefiles. I was trying to get this stuff running, as I have an
interview with a company TOMORROW that uses viewkit.
I sent mail to the viewkit.com
Hello,
What the heck is the big deal about gnome anyway?
I have only seen the gnome that comes on the Debian 2.1 CD, I
have not seen later versions. I believe gnome is in its infancy
stage at present. From what I have read about it on the web, the
big deal appears to be that a full set of
Hi,
Yes, I read that post. You need to determine what the IRQ and
IO address of your board is currently. Then tell linux about it.
By looking at the current switch settings on your board, use the
tables in the manual to determine what IRQ and IO address the board
is set for. Don't trust
Hi,
I also posted a reply to your CDROM problem, to get you a little
further, but it has not shown up yet.
Anyway use the more command followed by the file name. This
will not help you with dmesg though, unless you output it to
a file, or pipe the output directly to more...
more foo.txt
which is your CDROM now)
You may have to use mount -t iso9660 /dev/mcd /mnt ro or whatever
was contained the other post. I'm sure you wrote it down or have it.
John
From: jh [EMAIL PROTECTED]
To: John Miskinis [EMAIL PROTECTED]
Subject: CDROM problem, solved? Yes, I think
Date: Sun, 17 Oct 1999
Hello,
I could also use some help trying to get later gnome versions
and enlightenment running on slink (2.0.36 kernel).
I originally installed the gnome and enlightenment that came on
the slink CD. But the enlightenment-conf had problems installing.
I grabbed a bunch of .debs of newer gnome
Thanks for writting John. I have a 486dx desktop. It has 16 mb of ram. I do
not believe I have any PCMCIA ability. Yes, the base system is installed. I
used floppy images created from another computer from my debian disks.
Incidently, the cdrom was working in dos before I installed, so there must
Hi,
You are much better off WITHOUT PCMCIA from an installation
standpoint. I do not know the exact steps to follow to get the
standard CDROMs to work though as my installation was much
more complicated.
In any case, it is probably a matter of using the modconf
utility, which I believe gets
dselect NOT deselect, sorry...
John
__
Get Your Private, Free Email at http://www.hotmail.com
Hi Jeff,
I just realized that I assumed you had a SCSI based CDROM. I
have had SCSI on the brain lately trying to get mine working and
that hurdle is over.
If you have an IDE based CDROM (most likely) forget everything
I said about SCSI.
In any case try the MCDX support under the CDROM entry
Hi Marius,
Thanks for the info. It appears you have a VERY old BIOS, as I
downdraded mine recently from the IBM 1.1 system disk (I was
previously using 1.2).
My Power Management version is 1.35 (yours 1.25)
My BIOS is 1.28 (yours 0.21)
The Thinkpad Configuration software is the Windows based
Hello,
I've been trying to get the atari800 emulator working. The ROMS
are not in the package for legal reasons. The link in the readme
is bad, and although I found the xf25.zip elsewhere, the ROMs
to not appear to work when I unpack them on WIN95, and move them
to linux. (Maybe there's a
Hello,
I've been quiet, as I got sound and my ppa (imm) zip drive working!
For the past couple days, I've tried everything I could find on
the web the Thinkpad 560, and it's APM problems. I even downgraded
my BIOS to the 1.1 version. I built many kernels, even 2.2.0 on
the slink CD. (Which
Hello Lance,
- I also get the error when trying to start ViaVoice. I have
- a SoundBlaster PNP16. What is dsp? Is there a way I can
- get the device /dsp on my system.
I just went through this. Assuming that you have (made) a kernel
with sound support, login as root and perform:
cd /dev
Hello,
I am on my knees begging for help at this point :) - :(
I am trying to get my JVC XR-W2040 CDROM drive to work under
debian linux as my other CDROM is very flaky even when it is
sometimes seen at bootup. I think I am EXTREMELY close, and
would really appreciated any help. I have been
Hello,
While waiting for my post to show up, I digged a little
deeper, and found that irq3 was not being excluded by
PCMCIA. I excluded IRQ3 and IRQ5 (which it
picked up sometimes, but states it is wrong) and it now
uses IRQ9 like it does when running windows 95.
The dmesg output is included
Hello (and Thanks for continued help),
I have included the xconsole output, when I insert the card
after the system is up. I also included what is output when I
pulled out the card, as it notes that the SW INT is set and Why?.
I also made the /dev/sr0 device from /dev with:
mkmod -m 777 sr0
Hello,
I grabbed pcmcia-cs-3.0.14 and the sym53c500 driver. It did not
even state the detection of the JVC CDROM, but the socket info
appeared correctly in /var/run/stab (??)
It says 1994 on the back of the box for the New Media Bus Toaster,
so I think (?) it may be the older card.
Is there
Hello,
A few minutes ago, I happened to boot up linux with my
H45 quickcd attached (pcmcia) to my IBM Thinkpad 560. I
was surprised to see the /dev/hdc show up using IRQ3 as
attempts in the past never worked. It appears that the CDROM
takes a second or two to spin up, and something times out
Hi,
I had this problem with my CDROM way back in kernel 1.2 (1995). I fixed it
by
increasing the time-out settings in the BIOS.
It also helped to move it to hdb, thus on the first controller, but I am
not exactly
sure why. But increasing the BIOS settings worked more consistently.
I
Hi,
I have included the dmesg output, showing exactly what is happening
when the CDROM times out during boot. Since this worked once, I
am hoping that something stands out, and someonce can advise me
on how to increase the timeout. Again this is a H45 QuickCD.
When it did work once, it worked
Hi,
I have included the dmesg output, showing exactly what is happening
when the CDROM times out during boot. Since this worked once, I
am hoping that something stands out, and someonce can advise me
on how to increase the timeout. Again this is a H45 QuickCD.
When it did work once, it worked
Hello,
After more reading and experimenting, I was able to get the CDROM
to be seen by adding the following command to the cdrom.opts file
in /etc/pcmcia
CORE_OPTS=unreset_delay=1000
My next task is to get my ppa zip drive to work, so I can start
backing up my system!
John
Hi,
I thought I had resolved the problem by adding the line
CORE_OPTS=unreset_delay=1000 to /etc/pcmcia/cdrom.opts
But on next 4 or 5 reboots it was not seen. I even increased
the timeout to 2000 and 4000, but no luck. I welcome any and
all advise.
John
Hi,
I noticed that when running fvwm2 (or fvwm) after a few window
drags, the screen gets corrupted. The wierd thing is that I
do not see this problem when using wmaker at all.
Has anyone else ever seen this problem? If so, any clues would
be helpful. Perhaps fvwm/2 exercises the X Server
Hi,
I have been running the 2.1 debian release (well) on my TP 560
for a week or so. I have delved into building my own custom
kernel, to get around APM problems, add sound, SCSI etc.
I have read the kernel howtos, and read/printed the various things
under /usr/linux/src that apply to the
Hi,
I have only recently begun to play with linux, and have no
knowledge of how other distributions are setup. I am also
not familiar with the history or overall goals of debian.
I read great things about debian, and chose it, not knowing what
to expect. Perhaps the platform I am using
Hello,
As some of you, I have recently installed debian 2.1 on my Thinkpad 560. I
have tried MANY of the XF86Config files on the net, but I
could not arrive at one that worked flicker-free on my 800x600
dual scan screen. Light grays would have wavy lines, etc.
SO, I have pieced together one
Hi,
It doesn't appear that xterm allows this from what I can find.
I tried gnome-terminal. It allows a picture to be placed, but
when I do this the display gets all messed up when it needs to
scroll. I would be curious to know if this is a problem with MY system, or
everyone's.
I would
Hello,
I noticed this problem ALSO posted at comp.windows.x.i386linux
I just installed XF86 3.3.5 to use on debian 2.1, but the postinstall
script gives an error regarding undefined symbol register_frame.
I noticed a .rpm file in the FTP dir named frame_register
There is no mention of this in
Hello,
Many thanks to all those who helped. I am now
up and running 2.1 debian, using full 800x600
and 256 colors on my Thinkpad 560.
I am using the X that comes with 2.1, and it's fine.
It took a lot of playing around, but I'm there.
Sometime I will resume trying to get either external
Hello,
Yesterday I got the distribution up, after coping the CD #1 over
to my C: in Win95, and copying the files in each binary-all that
ral, replacing the 0K ones in binary-i386 to satisfy install. I
was underway, and did not see the post about the dselect overrides,
but my strategy worked.
I
Hello,
I recently copied the entire 2.1 CD to c:\debiancd using windows 95,
to avoid CDROM problems, and am now persuing a hard disk based
install.
It appears that the install expects symbolic links to work. I
poked around and these links appear to be 0 length files, even
under Windows 95.
Hi,
I got the debian 2.1 CDs today. I got peanut linux somewhat working
over the last few days, saw KDE, really cool. I have been having
NOTHING BUT PROBLEMS INSTALLING debian 2.1 today/tonight.
No matter what I do, it won't see my CDROM during the install. It
says Oh, I see you have a
Hi,
Yes, I was under the impression that I had to use the tecra
versions of rescue and drivers. This got me up and running
with the base system. I will try ANYTHING though if you
think this might be effecting the CDROM access.
John
__
Get
Hi,
I also have a JVC SCI CDROM (reader/writer) that I use with
a PCMCIA Bus Toaster SCSI-adapter, which is MUCH more reliable
(at least on Windows 95) as it stays spun up, and hardly ever gets
an error like the H45 Quick CD.
The reason I haven't tried this yet is that no one responded to
my
Hi,
I just tried everything again from scratch. This time I used
the JVC SCSI CDROM, with the New Media Bus Toaster PCMCIA-SCSI card.
Again, I could not use the CDROM for install. I configured just
about all of the SCSI device drivers, and PCMCIA controller. Now
when I boot, I see some info
Hello,
I'm giving up for now on a CDROM based install.
It never lets me successfully install the mcd module, it
complains about a device or resource busy. Perhaps I need
to supply command line parameters, but anyway I'm giving up for now.
HARD DISK INSTALL
I used Windows95 to copy the
Hello,
Although I have been able to get the base 2.1 system up and
running, I am now trying to download what I need to get X Windows,
and its dependency packages, and then a few clients (for now) running.
In the relnotes9.html, the required files are listed, but mention
tared sets such as
Hello Folks,
I got a couple requests for more information about how I am trying
to set things up, and what I did to get this far.
I gave up on trying to use 1.3, as it would crash shortly after
Loading Linux., even when I copied the entire debian directory from
the 1997 Boot Magazine to
Hello,
I am wondering if anyone has experiences (good or bad) with using
either of these CDROM devices under debian. I have the opportunity
to borrow the debian (or other dists) CD next week, and want to
make sure it is possible to use these devices to install.
When I got the base system up on
with DOS fdisk, to have
1G, 900M, and 112M. I hope to leave Windows95 on the 1G (for now)
put linux on the 900M, and it's swap on the 112M, if that makes
sense.
Many Thanks in advance,
John Miskinis
__
Get Your Private, Free Email at http
99 matches
Mail list logo