Re: no more sound after upgrade (trixie/sid) [SOLVED]

In the end, the problem had nothing to do with APT pinning, mixing Debian flavors, nor anything else mentioned in the previous messages. I've just noticed that in my XFCE mixer there is a tab "Configuration", where you can set the audio profile. I don't even know what an audio profile is

Re: no more sound after upgrade (trixie/sid)

Il 26/05/24 15:26, Michael Kjörling ha scritto: On 26 May 2024 13:08 +0200, from lu...@sulweb.org (Lucio Crusca): _Or_ you can see that [...] a power tool that requires understanding of the consequences of the results. I absolutely agree with you, but I feel like the point here (where

Re: no more sound after upgrade (trixie/sid)

Il 25/05/24 17:25, Frank ha scritto: I've been running a 'pure' testing since 2008. No sid or stable in sight. You have a point, I should have specified better what I meant. I tried running pure Debian testing too, but, in my case, given the way I use my system, I soon realized that

Re: no more sound after upgrade (trixie/sid)

Il 25/05/24 17:54, Mindaugas ha scritto: Yes, people do. It's their systems. Just like my system is mine. But then there is no need to cry and complain that something is not working or is not working properly. Cry and complain? I've only asked for help, giving all the info I have about

Re: no more sound after upgrade (trixie/sid)

Il 25/05/24 13:51, Mindaugas ha scritto: Hello. Don't make a FrankenDebian. Oh, I'm sorry. Your system has already become like this. P.S. The reason things can break is because the software packaged for one Debian release is built to be compatible with the rest of the software for that

no more sound after upgrade (trixie/sid)

My notebook has Trixie for most packages, then some from Bookworm and a few form Sid. Pipewire used to output sound just fine until yesterday, when I upgraded the whole system via aptitude and rebooted. Until yesterday I also had rc-buggy in my sources-list, but then I removed it (before

Re: Unable to associate to mobile hotspot

Il 04/03/23 05:23, Rodrigo Cunha ha scritto: What is your kernel? Linux t470 6.1.0-5-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.12-1 (2023-02-15) x86_64 GNU/Linux I saw in a forum from Arch that a problem in the kernel is causing this. I've read through the forum posts you linked, and the

Re: Unable to associate to mobile hotspot

Il 03/03/23 09:29, didier gaumet ha scritto: I would look at the WPA type used by the android hotspot: in the past I have had problems with pure WPA3 or even hybrid WPA3/WPA2, so I would try to configure -at least temporarily- this hotspot in pure WPA2 mode Sadly my Redmi Note 8 with MIUI

Re: Unable to associate to mobile hotspot

Il 02/03/23 20:22, Charles Curley ha scritto: I would think there would be more lines from the supplicant. Yes, there are, but I only posted the logs you asked for (grep -i networkmanager). Here is what wpa-supplicat has to say about the problem: 2023-03-02T21:38:57.606785+01:00 t470

Re: Unable to associate to mobile hotspot

Il 02/03/23 18:55, Charles Curley ha scritto: grep -i networkmanager /var/log/syslog Thanks, I looked at the logs, but I couldn't find the problem. The SSID is "papospot". Here are the relevant log entries: 2023-03-02T18:07:18.857868+01:00 t470 NetworkManager[678]: [166838.8553]

Unable to associate to mobile hotspot

I'm using Sid/amd64 on my notebook and I have a Android smartphone. My notebook has no problems to associate to every WiFI access point I tested so far, including mobile phones hotspots, except the hotspot of my own smartphone. On the other hand, another notebook I have (booted with

[WORKED AROUND] Re: mariadb does not run

I ended up installing MariaDB 10.8 using the MariaDB unofficial Debian repository and it works... That makes me suspect there's a problem with the official mariadb-server-core-10.6 Debian package, but it's very strange no such bug has been filed yet (how could that happen only to me?).

Re: mariadb does not run

Il 03/05/22 12:05, to...@tuxteam.de ha scritto: What does dpkg -l "*mariadb*" say? # LANG=en dpkg -l "*mariadb*" | grep ^ii ii libdbd-mariadb-perl1.22-1 amd64Perl5 database interface to the MariaDB/MySQL databases ii libmariadb3:amd64 1:10.6.7-3 amd64

Re: mariadb does not run

Il 03/05/22 11:28, to...@tuxteam.de scritto: Try `sudo apt purge mariadb-server', watch out for error messages, then re-install. Perhaps that helps. I didn't mention that in my first post, but I've already tried purging and reinstalling several times. The one I reported is only the last one,

Re: mariadb does not run

Il 03/05/22 09:47, to...@tuxteam.de ha scritto: Any chance you could try to run a command line as above and see whether the daemon likes to start? # /usr/sbin/mariadbd --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mysql/plugin --user=mysql --skip-log-error

Re: mariadb does not run

Il 03/05/22 07:04, to...@tuxteam.de ha scritto: According to this huge mess, the log file is somewhere in /var/lib/mysql/t470.err (the number '470' is the process ID, aka PID, so it will change at every start). Actually t470 is my hostname so it stays the same. I had already looked at that

Re: mariadb does not run

Il 02/05/22 17:43, Larry Martell ha scritto: mysqld_safe is a shell script - you could try running it with sh -x to see what it's doing and/or how it fails. Here's to you: # bash -x mysqld_safe + KILL_MYSQLD=1 + MYSQLD= + niceness=0 + nowatch=0 + mysqld_ld_preload= + mysqld_ld_library_path=

Re: Odd reproducible problem - but is it a bug?

Il 02/05/22 17:17, Richard Owlett ha scritto: If logged in as "richard" I can execute su {+ password} and receive a prompt indicating I'm "root".   "bash: update-grub: command not found" Bug? No, it's only an effect of the PATH variable. Try "su -".

Re: mariadb does not run

Il 02/05/22 15:46, to...@tuxteam.de ha scritto: Have you tried to start the mariadb server by hand? Yes, I've tried with: # mysqld_safe but it exits almost immediately and it logs the same errors reported by `systemd status mariadb`

Re: mariadb does not run

Il 02/05/22 12:54, mick crane ha scritto: I don't know anything about this but https://dba.stackexchange.com/questions/184283/mariadb-10-1-galera-cluster-error says The source of this error Thanks but... it's not the same error, nor the same context.

mariadb does not run

Until yesterday I had mariadb 10.6 running on my system (bookworm/sid). It was behaving strangely, so I decided to stop it, uninstall it, remove all databases during uninstall (it's a developer system, so no real data to save there) and install it again. Before reinstalling it, I checked that

Re: Problems with videos playback for my user

On 06/01/22 00:34, Lucio Crusca wrote: Thanks, nice try, but, besides I've cleared all three steps just in case (CPU always below 5% while playing videos), none of those can explain why video playback still works correctly for all the users except mine. Since I needed videos to play, I had

Re: Problems with videos playback for my user

On 06/01/22 00:22, Jeremy Ardley wrote: Any or all of of these: - Check CPU usage. - Uninstall Steam - reboot Thanks, nice try, but, besides I've cleared all three steps just in case (CPU always below 5% while playing videos), none of those can explain why video playback still works

Problems with videos playback for my user

I'm on Debian sid, using pipewire (just in case that makes any difference). Since a few hours my user is not able to playback videos anymore. All browsers and mplayer in general behave like this: they do not play just the "video" part, but they normally play any sound tracks the videos come

Re: mount.ecryptfs_private in .xsession with autologin [SOLVED]

I've finally sorted it out. The problem is Debian bug 870126. Work around it by manually adding: sessionoptional pam_keyinit.so force revoke to /etc/pam.d/nodm

Re: mount.ecryptfs_private in .xsession with autologin

On Nov 1, 2021 I wrote: (actually a Raspbian, but I assume it's no different I've now tried installing a clean Debian 11 with Nodm in a virtual machine and I face exactly the same problem, so we can safely exclude any Raspbian-specific problems.

mount.ecryptfs_private in .xsession with autologin

, that is being called by .xsession: #!/bin/bash -x # Original by Michael Halcrow, IBM # Extracted to a stand-alone script by Dustin Kirkland # Edited on 2021-10-28 by Lucio Crusca export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin PD="Private"

Re: Pipewire for multiple users

Il 19/08/21 23:48, martin f krafft ha scritto: Pulse and systemd need a dbus session, and |su| will not get you that. If you want to use either, you need to ensure that you're properly logged in as the user, or configure your system to set up the dbus session accordingly. > > An easy way to

Pipewire for multiple users

I'm on Debian bookworm/sid. Until a few days ago I had Pipewire 0.3.32 from experimental and it used to work for both of the users I have in my system as a PulseAudio drop in replacement (thanks to pipewire-audio-client-libraries package). Then I accidentally removed it and reinstalled it, but

Re: Joining Bullseye to Zentyal AD [SOLVED]

that replaced krb5.conf, but in recent releases (I'm using Debian sid) it doesn't do that something anymore? I don't know, but I'm wondering just out of curiosity, because it's working now and that's all I needed. Thank you very much indeed. Le jeu. 28 janv. 2021 à 00:36, Lucio Crusca

Joining Bullseye to Zentyal AD

I'm trying to join a Debian Bullseye instance to Active Directory domain powered by Zentyal Community Edition. I'm not sure if I'm doing it wrong on the client or on the server side, but the server is just a default Zentyal 6.2 CE setup with enabled AD services. I've tried following a few

[SOLVED] Re: libvirt guest bridge configuration

Il 19/09/20 16:42, Fabien Roucaute ha scritto: Need the output of 'systemctl status networking.service' Using the console I could find the culprit: the datacenter uses ethernet switches that filter MAC addresses, so I had to set the virbr10 mac address to the same as eno1 interface. It

Re: libvirt guest bridge configuration

Il 19/09/20 15:23, Fabien Roucaute ha scritto: Well sorry, I didn't know you were working on it via the net. Did you set the firewall (iptables or nftables)? No firewall at all. I have no idea how you can fix the issue without having access to a console now though. I can actually have a

Re: libvirt guest bridge configuration

Il 19/09/20 10:48, Fabien Roucaute ha scritto: Yes, there some mistakes in your interface file: delete the 'auto eno1' and add inet in the line beneath to get that 'iface eno1 inet manual' After fixing those mistakes and rebooting, the system is not reachable anymore. Unfortunately I can

Re: libvirt guest bridge configuration

Il 19/09/20 10:03, Fabien Roucaute ha scritto: Le 19/09/2020 à 08:21, Lucio Crusca a écrit : Il 19/09/20 00:54, Dan Ritter ha scritto: auto eno1 iface eno1 manual auto virbr10 iface virb10 inet static    bridge_ports eno1    bridge_stp off    address 2.4.6.8    netmask 255.255.255.224

Re: libvirt guest bridge configuration

Il 19/09/20 00:54, Dan Ritter ha scritto: auto eno1 iface eno1 manual auto virbr10 iface virb10 inet static bridge_ports eno1 bridge_stp off address 2.4.6.8 netmask 255.255.255.224 gateway 2.4.6.1 the bridge eats the eno1 interface. Using that configuration it actually brings

libvirt guest bridge configuration

I'm trying to bridge a network interface between host and guest (both Debian Buster+Bullseye+Sid) so that NAT is not needed. In the host /etc/network/interfaces I've declared a bridge like this: auto eno1 iface eno1 inet static address 2.4.6.8 netmask 255.255.255.224 gateway 2.4.6.1 up

Re: sources.list

Il 19/10/2017 18:12, don magnify ha scritto: thanks...  i did. same result... You may want to run # apt-get update before your build-dep command.

Re: sources.list

Il 19/10/2017 19:29, don magnify ha scritto: how dies this help with the "build-dep python-imaging --fix-missing" part?! Because build-dep action needs to download source packages too. Since you plan to install *build* dependencies, you need the sources (or at least headers) of the

Re: sources.list

Il 19/10/2017 12:00, don magnify ha scritto: > # sudo apt-get build-dep python-imaging --fix-missing > > get: > > "E: You must put some 'source' URIs in your sources.list" You need to add deb-src lines. https://debgen.simplylinux.ch/

extundelete usage

I need to recover a deleted file (no backup available obviously). The file was /var/lib/libvirt/images/i5s.raw As soon as I deleted it, I realized it was the wrong file to delete and I unplugged the power chord. Then I booted systemrescuecd and mounted the filesystem readonly.

Re: Collisions in KVM guests [SOLVED]

Il 05/07/2017 21:13, I wrote: collisions count on their virtualized network interface (rtl8139 driver) I've tried to switch to virtio and everything is now working properly, no more collisions and good transfer rate.

Collisions in KVM guests

I have some qemu-kvm guests and a host system. Some of them are Debian GNU/Linux 9, other are Debian GNU/Linux 8. All of them are amd64. The host holds the only public IP address and it's a Debian 9 system. The guests are behind NAT of the KVM network. One of the guests act as a router and

Re: firewall rules for NAT

Il 27/06/2017 23:35, Pascal Hambourg ha scritto: Le 27/06/2017 à 13:29, Lucio Crusca a écrit : -A POSTROUTING -d 10.7.33.109/32 -p tcp -m tcp --dport 25 -j SNAT --to-source 10.7.33.100 If this rule is required, then your routing setup is wrong. Thank you very much, that was the problem

Re: firewall rules for NAT

Il 26/06/2017 11:35, Dan Purgert ha scritto: That shouldn't be happening -- you may have an errant rule you didn't show I think I did show that rule: -A POSTROUTING -d 10.7.33.109/32 -p tcp -m tcp --dport 25 -j SNAT --to-source 10.7.33.100 The problem is that without that rule things do

firewall rules for NAT

I have a server with Debian GNU/Linux as host system. The host runs several guest virtual machines, but it has only one public IP address. Each virtual machine is a QEMU/KVM Debian GNU/Linux system that runs some specific service (so I have one for websites, one for mail, one for database,

Re: php5-fpm segfault error 6 in libpcre.so.3.13.1

Georgi Naplatanov wrote: Stretch (Debian 9) doesn't include PHP 5.x, You are right, in fact it is a jessie+stretch server, mostly jessie + some package from stretch.

php5-fpm segfault error 6 in libpcre.so.3.13.1

Hi all, I've a problem with a stretch/amd64 web server. Since two hours ago, I get the following in dmesg and syslog: Jun 9 11:21:01 weber kernel: [ 331.716831] php5-fpm[1245]: segfault at 7ffcb4febf70 ip 7f2e5e8d629a sp 7ffcb4febf60 error 6 in

Re: wlan0 hw address changes

to...@tuxteam.de wrote: In the case of NM, it seems it has acquired[1] this capability last year. [1] https://blogs.gnome.org/thaller/2016/08/26/mac-address-spoofing-in-networkmanager-1-4-0/ Bingo! Thanks a lot.

Re: wlan0 hw address changes

Let's try to add some informations... my wifi interface is: 03:00.0 Network controller: Broadcom Limited BCM43224 802.11a/b/g/n (rev 01) I've tried to use an external PCI-express wifi card: 06:00.0 Network controller: Qualcomm Atheros AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn]

Re: wlan0 hw address changes

Dominik George wrote: How do I check the systemd-networkd thing? ps aux… ;) The MAC changing would also have to be configured in /etc/systemd/network . Unfortunately systemd wasn't to blame here, no systemd-networkd running and no configuration files in /etc/systemd/network. I add that

Re: wlan0 hw address changes

Dominik George wrote: Assuming you do not have macchanger or something like that installed (guessing you wouldn't be asking if you had taken such measures ;)), I only know of systemd-networkd having such a feature. No macchanger and nothing like that I'm aware of. How do I check the

Re: wlan0 hw address changes

Hans wrote: Do you have package "macchanger" installed? Nope... # apt-cache policy macchanger macchanger: Installed: (none) Candidate: 1.7.0-5.3+b1 I can add my system is a Debian GNU/Linux 9 amd64 that went through tons of upgrades in the years (it started as a testing version of

wlan0 hw address changes

I need to tell a network admin the hardware address of my wlan0 interface, so that he gives me access to the wifi network. The problem is that the hw address is changing everytime I use the wlan0 hardware switch... # ifconfig wlan0 wlan0: flags=4098 mtu 1500

Re: "Invalid arch-independent ELF magic" in grub after SSD migration

Felix Miata wrote: Did you look for any significant differences between the working and non-working grub.cfgs? Does Grub see your SSD as an NVMe device and need to embed a different binary or load a different module for it? I think you've caught it! Here is what seems to me the most

Re: "Invalid arch-independent ELF magic" in grub after SSD migration

to...@tuxteam.de wrote: In the OP's context this doesn't make much sense. From the OP's mail dd if=/dev/sda of=/dev/sdb [other params elided] That would copy boot sector, partition table and everything. If (a) the one (or the other) disk isn't broken (b) no one else is concurrently

Re: "Invalid arch-independent ELF magic" in grub after SSD migration

Il 22/02/2017 21:40, Lucio Crusca ha scritto: cmp is running just now, it started a few minutes ago and it will take about 2 hours. No errors reported until now. I'll let you know the results. No errors reported by cmp. Still the system is not bootable, same error as before. What a pity

Re: "Invalid arch-independent ELF magic" in grub after SSD migration

Tixy wrote: At the very least, Ubuntu would cause writes to the SSD due to things like superblock updates for mount time and count, and possibly access timestamps in file inodes. But if it's a GUI desktop live CD, I wouldn't be surprised if there wasn't background file indexing and thumbnailing

Re: "Invalid arch-independent ELF magic" in grub after SSD migration

Il 22/02/2017 17:40, Tixy ha scritto: On Wed, 2017-02-22 at 09:18 +0100, Lucio Crusca wrote: I booted a live Ubuntu from CD media, checked with fdisk that every partition is starting 4K aligned and used the following command to copy the disk contents: dd if=/dev/sda of=/dev/sdb status=progress

Re: "Invalid arch-independent ELF magic" in grub after SSD migration

Il 22/02/2017 15:39, Eero Volotinen ha scritto: Try using clonezilla: http://clonezilla.org/ I can try, but I'd prefer understanding what I'm doing wrong, if possible.

Re: "Invalid arch-independent ELF magic" in grub after SSD migration

Il 22/02/2017 09:18, Lucio Crusca ha scritto: the following command to copy the disk contents: dd if=/dev/sda of=/dev/sdb status=progress bs=4K P.S. I've just tried cloning again with the SSD in the notebook and the HDD in the external USB/SATA adapter, this time booting Ubuntu from USB

"Invalid arch-independent ELF magic" in grub after SSD migration

Hello, I've just migrated my Debian testing/unstable install from a HDD to a SDD (too many custom configurations to go for a clean install). The hardware is a Dell Precision M4500 notebook. The HDD is a Seagate 250GB 7200rpm, the SDD is a Samsung 250GB EVO 850. The total capacity matches

Re: Stretch/Sid not resuming from suspend

On April 20, 2016, I wrote: Hello *, I'm using Stretch/Sid amd64 and I update it every few days. Since about a month or so it fails to resume from suspend to RAM. It doesn't happen regularly, it fails about 50% of the times. When it doesn't resume, I get only a black screen in text mode

Latest testing cdimage

Hello, I'm trying to install the latest cd image downloaded from http://cdimage.debian.org/cdimage/weekly-builds/amd64/iso-dvd/debian-testing-amd64-DVD-1.iso The hardware is a HP 15-G210 NL: http://support.hp.com/us-en/document/c04536542/?openCLC=true I've disabled Secure Boot and I'm

Stretch/Sid not resuming from suspend

Hello *, I'm using Stretch/Sid amd64 and I update it every few days. Since about a month or so it fails to resume from suspend to RAM. It doesn't happen regularly, it fails about 50% of the times. When it doesn't resume, I get only a black screen in text mode with the blinking caret in the

Re: Disable knotify sounds using xfce

Il 05/04/2016 13:34, Liam O'Toole ha scritto: I'm not using KDE at the moment, but my experience of it is that all KDE applications store their configuration in text files. Is there a knotifyrc file somewhere on your system? See the "second way" in the following link:

Re: Disable knotify sounds using xfce

Il 04/04/2016 20:44, Ralph Katz ha scritto: You could do something similar, or change permissions, for the whole kde sound file directory. A more proper method may exist, but simple works fine. Thanks for the suggestion, a # chmod o-r /usr/share/sounds/KDE* worked on stretch/sid too.

Disable knotify sounds using xfce

Hello all, I use Xfce, but I also like having a few KDE apps installed (namely, k3b, konquest and a few others, but the problem here pertains to knotify in general). I haven't the full KDE desktop and I don't want it. I'm on a up-to-date stretch/sid amd64. When playing konquest, for example,

GLX and nouveau

Hello all, I've just switched from proprietary nvidia driver to nouveau (because the transition of the nvidia driver to nvidia legacy left my system without graphics, and I prefer using my time to configure nouveau than to configure nvidia-legacy). I'm running stretch/sid amd64. My hardware

Re: GLX and nouveau

Il 12/02/2016 17:43, Sven Joachim ha scritto: What does "ldd /usr/lib/xorg/modules/extensions/libglx.so" print? Cheers, Sven $ ldd /usr/lib/xorg/modules/extensions/libglx.so linux-vdso.so.1 (0x7ffda3181000) libGL.so.1 => /usr/lib/x86_64-linux-gnu/libGL.so.1 (0x7f135aa8)

Re: GLX and nouveau

Il 12/02/2016 16:52, Ric Moore ha scritto: Got libGL installed? I think so, because I do have libgl1-mesa-glx and libgl1-mesa-dri installed. Do I need other packages for libGL?

Re: GLX and nouveau

Il 12/02/2016 18:37, Sven Joachim ha scritto: On 2016-02-12 18:02 +0100, Lucio Crusca wrote: $ ldd /usr/lib/xorg/modules/extensions/libglx.so linux-vdso.so.1 (0x7ffda3181000) libGL.so.1 => /usr/lib/x86_64-linux-gnu/libGL.so.1 (0x7f135aa8) Where does that f

Re: GLX and nouveau [SOLVED]

Il 12/02/2016 21:24, Sven Joachim ha scritto: Try "update-glx --config glx" and select the mesa implementation (untested, I don't use those packages). Thanks a lot, that worked. Now that I don't use the buggy NVidia driver anymore I feel relief.

Booting netinst via PXE

Hello *, I've followed this guide [1] and now I have my PXE server up and running, however that guide doesn't tell how to configure tftp-hpa menus for Debian, let alone the netinst version. This other guide [2] tell something about Lenny, but I couldn't find the debian-installer folder in the

Re: Booting netinst via PXE [more or less SOLVED]

In data mercoledì 6 novembre 2013 16:09:42, Lucio Crusca ha scritto: What am I doing wrong? I still don't know what, but switching to the minimal ISO (mini.iso) instead of the one with the debian installer bundled did the trick. That suggests me that the same problem would show up with Ubuntu

Re: building from source for different arch

In data lunedì 9 settembre 2013 18:30:41, Gregory Nowak ha scritto: On Mon, Sep 09, 2013 at 11:20:34PM +0200, Lucio Crusca wrote: I'm trying to build opus package from source for both amd64 and i386, after having applied the patch by Pino Toscano I've found here: You might want to have

Re: Printer brand recommendations

In data lunedì 9 settembre 2013 14:48:18, Beco ha scritto: I'm using this site to see compatibility. http://www.openprinting.org/printers I think openprinting.org is terribly outdated. I prefer googling for printer model name linux and seeing what people ask in the forums, but please note

Jessie/sid 64: ia32-libs conflicts with libjack-jackd2

Hi *, I need ia32-libs in order to enable 3D features of the fglrx driver in my 64bit box. Until a few days ago I had it installed ok. Then, after some aptitude update, I got broken packages because of ia32-libs: it depends on libjack-jackd2-0:i386, which in turn depends on libopus0:i386,

Re: Jessie/sid 64: ia32-libs conflicts with libjack-jackd2

In data lunedì 9 settembre 2013 11:44:20, Darac Marjal ha scritto: Usage of ia32-libs is now discouraged, in favour of enabling the i386 architecture (dpkg --add-architecture i386; apt-get update) and installing the native 32-bit version of your application. Do you know by any chance of the

building from source for different arch

Hi, I'm trying to build opus package from source for both amd64 and i386, after having applied the patch by Pino Toscano I've found here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=674467 What I've done so far is: $ apt-get source opus # apt-get build-dep opus $ patch -Np1

XFCE application shortcuts

Hello *, I'm trying to bind a keyboard shortcut to control sound volume. I've found this: http://forums.debian.net/viewtopic.php?f=16t=63591 however when I open Settings Keyboard Application shortcuts and click Add +, the friendly GUI does not let me enter any shortcut. I'm able to enter

Re: XFCE application shortcuts

Claudius Hubig wrote: It doesn’t complain, it waits for you to press the keys you want as a shortcut :) ROTFL. If I weren't the only one in the world not understanding it myself, I'd say it's not very intuitive, but being alone I have to admit it's my fault instead: please excuse me, I'm

[SOLVED] Re: Wheezy installation problem

As they told me on debian-boot list, the problem was being caused by bug #696942 which has been fixed in yesterday weekly iso image of wheezy. It now works, tanks. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact

Re: Wheezy installation problem

Petr Voralek wrote: What did you use as partition table type? Tried both gpt and msdos (which I assume to actually be mbr), same error. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive:

Wheezy installation problem

Hi everybody, I'm trying to install Debian Wheezy amd64 (January 28 iso file) on a new pc I've just assembled. The mainboard is an Asus Sabertooth 990FX R2.0, with AMD 990fx/SB950 chipset. The CPU is an AMD FX-8350 and I have 16GB of RAM, so I'd prefer to avoid the 32bit version of the system

but ubunt... (multimedia)

Hello, I came back to Debian (testing/unstable) since a good year now, before that I had been using Ubuntu for about two years and yet before Debian since 2003. No doubt I prefer Debian. There's a but. Debian pretends to be the universal OS. Maybe it's true for everything, but multimedia.

Re: but ubunt... (multimedia)

Raffaele Morelli wrote: use another app... eg qdvdauthor or switch to the command line :D typical reply from the IT dept. qdvdauthor isn't in Debian either (but, even then, I still need DVD-Styler for a few other reasons) and switching to the command line is not really a solution in this

udev at boot

Hello *, I'm fighting with a problem that comes up sometimes at reboot with Etch. Sometimes the system hangs on the message: Waiting for /dev to be fully populated... but some other times it works and the boot process continues normally. Searching with google I could realize this is related to

Subdomain

Hello *, I'm not sure this is on topic, however I don't know wherever else to ask. I have my Debian Etch server on a static IP address running bind9 for my own domain (sulweb.org, well bind9 it's not up running yet, but let's assume it were). I'd like to create a subdomain (say dev.sulweb.org)

bluetooth advertising

Hello all, are you aware of any FOSS application for bluetooth advertising that works on Debian? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

X.org: manual fonts installation

Hello everybody, I have to install some commercial fonts in current sid/i386 to make them available to GTK applications (flashplayer in particular). I know, that's not free software nor free fonts, but that's what will eventually buy me the food for a few days... Three questions: 1. I have to

Re: NFS mounts in Etch

Rob Heilman wrote: Is this observed behavior the intended behavior? Why the change in procedure? I don't really know. Where should I submit a request to revert to the previous behavior observed in Sarge? If you suspect that's a bug (and it seems, because it makes wrong assumptions about

Re: Getting photos from USB compactFlash into linux

I've no real experience with automounter, but I've noticed something in your config files that looks strange to me; please don't assume I'm right. This file below (auto.misc) looks like it needs a flash line like maybe: #below added july 28,2004 flash -fstype=fvat,sync,nodev,nosuid

Source ISOs

Hello everybody. I'm a Debian CD vendor and a customer asked me the source distribution (woody). However I and my customer both don't know how one can install those CDs, and I'd like to know what exactly a source distribution is before selling one. Is there an installer that compiles packages

Re: DSA-533 - Courier CSS

Andreas Janssen wrote: According to a message on debian-user-german, the /etc/courier/authmodulelist file was deleted during the upgrade. I can confirm the file wasn't there anymore after the upgrade. I extracted a copy from the backup (more or less) and the SMTP relaying started working

DSA-533 - Courier CSS

Hello everybody. I'm the admin of a mail server running woody and Courier. Last week I applied the DSA-533 patch. After that, the authenticated SMTP relaying stopped working. When I try to send an email using SMTP auth, the logfile shows /usr/lib/courier/courier/modules/esmtp/authstart: cannot