Le 04/10/2017 à 15:08, lou a écrit :
l'installateur ma évidemment formater ma swap
Non, pas évidemment. L'installateur ne formate un swap existant que si
on le laisse faire. On a le choix entre utiliser un swap existant et il
sera formaté, ou ne pas l'utiliser et il ne sera pas formaté.
Le 03/10/2017 à 17:11, hamster a écrit :
Quelqu'un a qui j'ai installé débian en double boot n'est pas séduit par
le bidule et me demande de lui remettre l'ordi avec uniquement windows.
Je me fais un point d'honneur a satisfaire sa demande, seulement voila :
si je vire debian, grub ne marche
Le 30/09/2017 à 04:18, Gary Roach a écrit :
Well the philosophy and stories are nice but my access to the internet
is still among the missing.
We are waiting for the information asked by Reco several days ago :
ip address list
ip route list
cat /etc/resolv.conf
tcpdump -nvi any udp port
Le 29/09/2017 à 18:31, Larry Dighera a écrit :
Note what occurs when there is no image in the swap FS and initramfs
is expecting to find one.
A swap is not a filesystem.
The initramfs does not expect to find a hibernation image. If the swap
contains a hibernation image then it is used to
Le 28/09/2017 à 17:46, Seb a écrit :
si des tests de débit comparatifs pour déterminer l'étendue
précise du problème avaient été faits :
- en lecture dans le système de fichiers
Non testé.
- en écriture dans le système de fichiers
Testé.
- en lecture brute dans le périphérique bloc
-
Le 28/09/2017 à 16:37, to...@tuxteam.de a écrit :
Remember Stacker?
The disk compression tool for MS-DOS ?
(this one is actually smarter, because when it *has* to
swap, the already compressed stuff gets swapped out, reducing I/O).
From what I have read about zram, I did not get the
Le 28/09/2017 à 15:58, to...@tuxteam.de a écrit :
It seems to be a way to swap out to "compressed RAM"
Actually zram is just a compressed ramdisk block device.
It can be used as swap space or anything else.
Le 28/09/2017 à 09:39, Jimmy Johnson a écrit :
On 09/27/2017 02:38 AM, Pascal Hambourg wrote:
Le 27/09/2017 à 10:37, Jimmy Johnson a écrit :
But if everything is correct and you are using lets say sda1 as
root in your fstab your system will use sda1 as the LABEL, I've seen
this over
Le 27/09/2017 à 16:43, Gene Heskett a écrit :
Secondary question. On efi setups, how much blank space in front of the
1st partition is needed for that stuff on a terrabyte drive?
None.
That space is not used in EFI setups. Instead the bootloaders are in a
regular EFI partition.
Le 27/09/2017 à 14:42, Gene Heskett a écrit :
[ 2404.664052] sd 0:0:0:0: [sda] 1953525167 512-byte logical blocks:
(1.00 TB/932 GiB)
[ 2404.676277] sd 0:0:0:0: [sda] 2048-byte physical blocks
But I've now spent several hours trying to put the 1st of 3 partitions on
it with figures that satisfy
Le 27/09/2017 à 13:00, Seb a écrit :
Pour finir, je sais obtenir un retour a des performances normales en
vidant le cache :
sync ; echo 2 > /proc/sys/vm/drop_caches
(...)
J'ai utilisé "/proc/sys/vm/drop_caches" comme mot-clef dans Google. La
ligne de commande que tu indiques demande au
Le 27/09/2017 à 10:37, Jimmy Johnson a écrit :
On 09/26/2017 02:25 AM, Pascal Hambourg wrote:
Le 26/09/2017 à 03:55, Jimmy Johnson a écrit :
Hi Mark, while multi-booting I use the device name in fstab,
/dev/sd?? none swap sw 0 0, it works for all my installed systems.
It is not always
Le 26/09/2017 à 15:57, Jack Dangler a écrit :
I have an existing drive near EOL (judging from the sounds). I got a
replacement drive for it (same size).
I plugged the replacement into a USB port and started a byte-for-byte
copy with
dd if=/dev/sda of=/dev/sdc
dd is not the best tool to
Le 26/09/2017 à 15:09, Greg Wooledge a écrit :
lucky, I'll focus on that page rather than dhcp-options(5) which is
very confusing, and seems to be talking in abstractions. It sure as
hell doesn't clearly define what options go in what files, nor even
which options are for the client and which
Le 26/09/2017 à 11:38, Rick Thomas a écrit :
# The primary network interface
auto enP1p3s15f0
iface enP1p3s15f0 net dhcp
^^^
It should be "inet". Typo in your post or in the actual file ?
Le 26/09/2017 à 09:56, didier gaumet a écrit :
Pour ton utilisation, je verrais plutôt quelque chose du genre:
$ rm /etc/resolv.conf
Non !
Lors de son installation, resolvconf remplace le fichier
/etc/resolv.conf par un lien symbolique qui pointe vers un autre
fichier, et ensuite ne modifie
Le 26/09/2017 à 03:55, Jimmy Johnson a écrit :
Hi Mark, while multi-booting I use the device name in fstab,
/dev/sd?? none swap sw 0 0, it works for all my installed systems.
It is not always reliable with multiple drives, because device names are
not stable across reboots. So it is advised
Le 25/09/2017 à 17:33, Gene Heskett a écrit :
For me, its a root session, and a "chattr +i resolv.conf"
Here we have a saying that roughly translates to :
"When you have a hammer, any problem looks like a nail."
Le 25/09/2017 à 18:00, Gene Heskett a écrit :
Also, there's http://manpages.debian.org/interfaces
In fact, the man page outright *lies* and says they're synonyms.
No it doesn't. It says that "allow-auto" (not "allow-hotplug") and
"auto" are synonyms, which is correct AFAICS.
Le 25/09/2017 à 15:54, Greg Wooledge a écrit :
On Mon, Sep 25, 2017 at 03:45:06PM +0200, Pascal Hambourg wrote:
Prepare to be disappointed if you modify directly resolv.conf, because the
software which wrote it first could rewrite it after you, as DHCP clients do
each time they renew the lease
Le 25/09/2017 à 15:24, Greg Wooledge a écrit :
I think it's better for all the unix-like systems to work the same way
(the way that they have all done for the last 30+ years), rather than
each one doing something different.
Sadly, there was never any uniformity in how interfaces, IPs, netmasks
Le 25/09/2017 à 14:56, Greg Wooledge a écrit :
On Sat, Sep 23, 2017 at 06:03:12PM -0700, Gary Roach wrote:
I have installed resolvconf
*shudder*
I mean, unless this is a laptop or a tablet or a phone or something.
Then it may be appropriate, because you might actually WANT your
resolv.conf
Le 25/09/2017 à 14:13, Stephane Ascoet a écrit :
Attention avec l'option dont tu parles: Si on retire la cle USB une fois
SystemRescueCD en RAM, il decale d'autant les noms des supports de
stockage...
Cela m'étonne. Le noyau n'a aucune raison de renommer les périphériques
de stockage
Le 23/09/2017 à 15:51, Pierre L. a écrit :
Le 23/09/2017 à 10:40, Pascal Hambourg a écrit :
Le 23/09/2017 à 08:50, Pierre L. a écrit :
Ca me rappelle il y a plusieurs années quand j'avais trouvé une petite
carte PCI pour faire du RAID (sata+IDE) à 2 balles, qui c'était révélée
être du
Le 23/09/2017 à 11:57, Seb a écrit :
Après j'avoue que ca m'a toujours un peu perdu ces histoires de
fakeraid...
J'aurais dû préciser quelque chose qui n'était qu'implicite dans mon
message initial: tout mes tableaux RAID sont en soft, gérés par 'mdadm'.
C'était clairement indiqué dans
Le 23/09/2017 à 08:50, Pierre L. a écrit :
Ca me rappelle il y a plusieurs années quand j'avais trouvé une petite
carte PCI pour faire du RAID (sata+IDE) à 2 balles, qui c'était révélée
être du "fakeraid"...
A quoi d'autre t'attendais-tu ?
Seules les grosses cartes RAID chères font du vrai
Le 14/09/2017 à 05:13, Ethan Andrews a écrit :
Hello,
I have recently had issues with burning DVDs
You can use an USB drive instead.
and am wondering if I can
boot a Debian 9.1 AMD64 DVD iso directly from an installed GRUB on
another Debian partition.
Do you mean a Debian installation
Le 07/09/2017 à 22:25, Pierre L. a écrit :
Le 07/09/2017 à 20:47, Pascal Hambourg a écrit :
Le 06/09/2017 à 19:29, Pierre L. a écrit :
Port 21 selon la convention, mais on peut le changer.
On peut, si on cherche les ennuis en environnement firewallé/NATé.
Il suffit de paramétrer le(s) bon
Le 07/09/2017 à 22:00, roger.tar...@free.fr a écrit :
il y a eu apparement un problème de BIOS. Le système Windows 7 utilisé sur un disque
supplémentaire était revenu avec heure affichée "01/01/2008". Ça arrive quand
la batterie (de ce portable) se décharge complètement.
Ça arrive depuis que
Le 07/09/2017 à 23:49, roger.tar...@free.fr a écrit :
Un gars évoque le fait qu'un liveCD a endommagé ses keyslots :
The problem seems to come from a liveusb that detected my partition as a swap
one someway and used the space of my keyslots to store there stuff.
You can read the whole thread
Le 06/09/2017 à 19:29, Pierre L. a écrit :
Port 21 selon la convention, mais on peut le changer.
On peut, si on cherche les ennuis en environnement firewallé/NATé.
Puis le serveur proposera une fourchette de port (passif) pour le
transfert de fichiers.
Pas vraiment. Lorsque le client
Le 07/09/2017 à 16:26, roger.tar...@free.fr a écrit :
Il y a bien un LUKS header et ça me soulage. Puisque j'ai découvert qu'il
fallait IMPÉRATIVEMENT le sauvegarder.
La sauvegarde de l'en-tête LUKS ne t'aurait pas permis de retrouver la
passphrase.
A ce stade, étant donné que je suis
Le 07/09/2017 à 14:32, roger.tar...@free.fr a écrit :
Oui
Mon LiveCD sur USB m'a indiqué :
/dev/sd5c 297 Gio
Partitions
/dev/sdc1 ext2 243 Mio boot
/dev/sdc2 extended 297 Gio
/dev/sdc5 crypt-luks 297 Gio
Depuis un terminal de mon Debian 4 installé sur mon LiveCD USB, je peux
utiliser la
Le 07/09/2017 à 10:42, Sébastien NOBILI a écrit :
cryptsetup luksOpen /dev/sdc5
Dans « nom-du-volume », je crois que tu peux mettre ce que tu veux, ça sert à
l’identifier au moment de la fermeture du volume.
Pas seulement : cela sert aussi à créer le périphérique
Le 07/09/2017 à 09:03, roger.tar...@free.fr a écrit :
Avec ma clef USB GParted 0.23.0 (qui contient Debian 4)
Où vois-tu que la clé contient Debian 4 ? Je doute qu'on puisse trouver
cette version de Debian qui est très ancienne avec Gparted en version
0.23 qui est assez récente (entre
Le 06/09/2017 à 23:48, roger.tar...@free.fr a écrit :
J'ai tenté le Debian Recovery mode proposé par Grub2 pour lancer un shell et
jeter un oeil, mais j'atterris en fait sur le module qui demande la passphrase
comme pour un boot normal.
Je peux éditer les commandes avant le boot avec 'e'.
Le 03/09/2017 à 15:12, Thomas Schmitt a écrit :
Hi,
Luis Speciale a écrit :
(hd0) (hd0,gpt6)(hd0,gpt5)(hd0,gpt4)(hd0,gpt3)(hd0,gpt2)(hd0,gpt1) (hd1)
Pascal Hambourg wrote:
Obviously hd0 is the internal disk. So hd1 must be the USB drive.
Indeed, hd0 has too many partitions
Le 03/09/2017 à 14:26, Luis Speciale a écrit :
Le 03/09/2017 à 14:00, Pascal Hambourg a écrit :
Le 03/09/2017 à 13:32, Luis Speciale a écrit :
ls gives me
(hd0) (hd0,gpt6)(hd0,gpt5)(hd0,gpt4)(hd0,gpt3)(hd0,gpt2)(hd0,gpt1)
(hd1) (cd0)
Obviously hd0 is the internal disk. So hd1 must
Le 03/09/2017 à 13:32, Luis Speciale a écrit :
ls gives me
(hd0) (hd0,gpt6)(hd0,gpt5)(hd0,gpt4)(hd0,gpt3)(hd0,gpt2)(hd0,gpt1) (hd1)
(cd0)
Obviously hd0 is the internal disk. So hd1 must be the USB drive.
However ls should show partitions on it. I wonder if the image was
properly copied.
Le 03/09/2017 à 12:58, Luis Speciale a écrit :
error: file `/boot/grub/x86_g4-efi/normal.mod`not found
Entering rescue mode...
"x86_g4-efi", really ? Should be "x86_64-efi".
My bad it's x86_64-efi
Now I think that it's linux.mod my problem
No it's not. normal.mod comes first. Until this
Le 03/09/2017 à 00:07, Luis Speciale a écrit :
sudo dd if=./debian-9.1.0-amd64-netinst.iso of=/dev/disk1 bs=1m
Looks good.
Then I did the install, but now I have this at startup
error: file `/boot/grub/x86_g4-efi/normal.mod`not found
Entering rescue mode...
"x86_g4-efi", really ? Should
Le 02/09/2017 à 23:52, list a écrit :
On m'a dit depuis longtemps que le fichier :
/etc/X11/xorg.conf
ne servait plus à rien.
C'est faux. Il n'est plus indispensable, nuance.
Mais quid de la souris ? Où faut il configurer celle-ci ?
Configurer quoi ? Certains réglages peuvent se faire
Le 27/08/2017 à 19:54, herve.thib...@free.fr a écrit :
systemd-resolve --status
avant et après l'établissement du VPN.
Avant
herve@herve-W54-55SU1-SUW:~$ systemd-resolve --status:
systemd-resolve: unrecognized option '--status:'
Tu n'as pas vu que tu avais fait une erreur de frappe, ":" en
Ne tiens pas compte de ma réponse précédente, nos messages se sont croisés.
Le 27/08/2017 à 19:19, herve.thib...@free.fr a écrit :
avant ou après la connexion
herve@herve-W54-55SU1-SUW:~$ cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by
resolvconf(8)
#
Le 27/08/2017 à 18:23, herve.thib...@free.fr a écrit :
(coupé)
Pas grand-chose de nouveau, on dirait une copie de ton précédent message
en réponse à mon avant-dernier message.
Si tu veux qu'on avance, il vaudrait mieux répondre aux questions de mon
dernier message (suspect : DNS).
Le 27/08/2017 à 14:36, herve.thib...@free.fr a écrit :
lors de la connexion vpn j'ai
Sun Aug 27 13:44:01 2017 TUN/TAP device tun0 opened
Sun Aug 27 13:44:01 2017 TUN/TAP TX queue length set to 100
Sun Aug 27 13:44:01 2017 do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Sun Aug 27 13:44:01 2017
Le 27/08/2017 à 13:22, herve.thib...@free.fr a écrit :
mais rapidement alors que la connexion n'est pas interrompue
Qu'entends-tu par "rapidement" et "pas interrompue" ?
herve@herve-W54-55SU1-SUW:~$ traceroute 172.27.232.29
traceroute to 172.27.232.29 (172.27.232.29), 64 hops max
1
Le 27/08/2017 à 10:32, David Pinson a écrit :
L'avantage des tutos est de comprendre par la pratique le pourquoi du
comment faire.
Les tutoriels décrivent le comment, mais plus rarement le pourquoi.
Parfois ce serait juste impossible, les explications théoriques
dépasseraient en volume les
Le 27/08/2017 à 00:02, Pierre L. a écrit :
Bon faut avouer aussi que bien souvent, le "tuto" n'apporte pas les
infos nécessaires à comprendre les commandes qu'on balance dans un
terminal ;)
C'est bien ce que je reproche aux tutoriels et ceux qui les écrivent,
plus qu'à ceux qui les suivent.
Le 26/08/2017 à 16:39, hervé thibaud a écrit :
Package tout installé pour vous montrer mes capacités en infomatique
Qu'est-ce c'est censé nous dire de tes capacités ?
tes questions sur adresse publique et interne IP ne m'inspire pas
Je n'ai pas posé de questions, j'ai juste suggéré des
Le 23/08/2017 à 09:17, Gabriel Moreau a écrit :
la partie stable d'une carte réseau est l'adresse MAC.
Pas toujours. Il y a des cas où l'interface a une adresse MAC invalide
(typiquement avec le bit multicast ou local activé) ou carrément pas
d'adresse MAC du tout, et le noyau doit générer
Le 24/08/2017 à 14:24, herve.thib...@free.fr a écrit :
la connexion se bloque
C'est un peu court, jeune homme.
On pouvait dire bien des choses en somme :
Etat de l'interface VPN
ping/traceroute vers l'adresse IP publique du VPS
ping/traceroute vers l'adresse IP interne du serveur VPN
Le 24/08/2017 à 11:30, Reco a écrit :
Somewhat hackish, but straightforward way to achieve this is to redirect
DNS requests from your LAN to correct DNS. Something like this should do
the trick:
Not so straightforward because you still need to get the ISP's DNS and
update the iptables rules
Le 21/08/2017 à 01:34, Francois Lafont a écrit :
On 08/20/2017 10:08 PM, bernard.schoenac...@free.fr wrote:
https://memo-linux.com/debian-9-retrouver-les-noms-des-interfaces-reseaux-eth/
Àmha, ce n'est pas forcément une bonne idée de toucher à Grub et
aux options de boot du noyau. La
Le 20/08/2017 à 19:53, Mario Castelán Castro a écrit :
On 2017-08-20 13:36 -0400 Arjun Krishnan wrote:
So thinking I had the wrong initrd like you suggested, I copied the initrd
and vmlinuz to the root partition of the usb
*Which* “initrd”? There are many of them. The ones
Le 15/08/2017 à 21:47, Gary Dale a écrit :
That still sounds like a bug. If I did a DD from a smaller to a larger
hard disk then used gdisk, I'd expect it to see the new drive size and
handle it correctly.
Gdisk does handle it correctly. It just does not correct it
automatically. If you
Le 20/08/2017 à 01:08, Borden Rhodes a écrit :
Here is the output from my system:
$ modinfo 4.12.0-1-amd64 xts
modinfo: ERROR: Module 4.12.0-1-amd64 not found.
You forgot the -k option before the version.
Otherwise, you can directly probe the file :
modinfo
Le 19/08/2017 à 08:48, Borden Rhodes a écrit :
I'm on the Buster repo. For all kernels released after 4.9, I can't
boot into my system, which has all encrypted partitions except for
/boot. I think tihs is my problem, as I get the same symptoms:
https://gitlab.com/cryptsetup/cryptsetup/issues/319
Le 18/08/2017 à 10:56, Christophe De Natale a écrit :
eth0 correspond à l'interface dont la valeur de l'adresse mac est la
plus faible et ainsi de suite.
C'est du moins ce que j'ai constaté sur un serveur installé sous Eole
(base Ubuntu) dans lequel il y avait plusieurs cartes réseau.
Pure
Le 18/08/2017 à 14:33, Henrique de Moraes Holschuh a écrit :
On Fri, 18 Aug 2017, Toad Zhou wrote:
#ifconfig eth3
eth3: flags=4099 mtu 1500
inet 172.16.1.20
#cat /etc/network/interfaces
auto eth3
iface eth3 inet static
address 172.16.1.16
netmask 255.255.255.0
Le 16/08/2017 à 22:20, andre_deb...@numericable.fr a écrit :
/boot/grub/device.map :
Aucun rapport ni aucun intérêt ici. Ce fichier sert uniquement à faire
la correspondance entre les noms de périphériques sous Linux (/dev/sdX)
et les noms de périphériques sous GRUB (hdN). Ça ne sert à rien si
Le 17/08/2017 à 10:24, Alban Vidal a écrit :
Citation de l'article Wikipedia sur Btrfs
(https://fr.wikipedia.org/wiki/Btrfs#Co.C3.BBt_associ.C3.A9_en_occupation_disque_et_lacune_sur_la_haute_disponibilit.C3.A9)
« Le fonctionnement interne de Btrfs rend pratiquement impossible de
déterminer la
Le 16/08/2017 à 23:22, Pierre L. a écrit :
Humm "fdisk" est inopérant aussi il me semble ?
"Gparted" est aussi dans les choux je crois bien ?
Je ne sais pas concernant Gparted qui a tendance à se mêler de beaucoup
de choses, mais fdisk ne s'occupe que de la table de partition et se
moque
Le 16/08/2017 à 12:13, andre_deb...@numericable.fr a écrit :
Sun mon serveur chez Online, au début,
mon unique disque dur était nommé bizarrement "sdc",
Normalement, s'il y a un périphérique /dev/sdc, c'est qu'il y a ou il y
a eu un /dev/sda et un /dev/sdb.
J'ai modifié sdc => sda
Le 16/08/2017 à 17:19, andre_deb...@numericable.fr a écrit :
On Wednesday 16 August 2017 14:35:14 Frédéric MASSOT wrote:
Le 16/08/2017 à 12:13, andre_deb...@numericable.fr a écrit :
... si je fais un "update-grub",
le fichier grub.cfg ne comporte qu'une partition bootable = sda1.
Comment
Le 15/08/2017 à 18:31, Pierre L. a écrit :
Dans le même registre, mais coté disques durs, je vois toujours des
histoires de sda/sdb/sdX, c'est un peu le même principe à mon avis...
Ça dépend de quoi on parle.
Le nommage initial des disques et des interfaces réseau par le noyau
suit le même
Le 15/08/2017 à 11:07, Zenaan Harkness a écrit :
On Tue, Aug 15, 2017 at 10:42:42AM +0200, Pascal Hambourg wrote:
DHCP software usually use the raw network interface, by-passing the IP stack
and iptables rules.
Would one "configure" DHCP firewalling with ebtables
ebtables
Le 15/08/2017 à 10:03, Bonno Bloksma a écrit :
Can someone help me to understand this? Why does DHCP work when the iptable
lines looks like in the first example
DHCP software usually use the raw network interface, by-passing the IP
stack and iptables rules.
Le 15/08/2017 à 01:14, Louis-Philippe a écrit :
Mon interface ppp0 ne se monte plus automatiquement au démarrage de mon
serveur suite à la migration à Debian Stretch.
Si je fais la commande "pon dsl-provider", tout fonctionne bien.
Et avec ifup ?
Un ifup eth0 donne :
ifup: interface eth0
Le 14/08/2017 à 20:46, Louis-Philippe a écrit :
Mon interface ppp0 ne se monte plus automatiquement au démarrage de mon
serveur suite à la migration à Debian Stretch.
Si je fais la commande "pon dsl-provider", tout fonctionne bien.
Et avec ifup ?
Après avoir découvert ce problème, j'ai
Le 14/08/2017 à 20:23, Joe a écrit :
On Mon, 14 Aug 2017 20:09:19 +0200
Pascal Hambourg <pas...@plouf.fr.eu.org> wrote:
Windows 7 and later versions support setting the hardware clock to
UTC through a registry setting. But with Windows XP the cleanest way
is to use the UTC timezone or d
Le 14/08/2017 à 07:11, arne a écrit :
To keep the hardware clock sane and the time correctly
displayed by multiple systems they need to agree on which timezone the
hardware clock is kept at.
Setting the hardware clock to local time with multiple systems is broken
if the time zone has
Le 14/08/2017 à 06:32, Gary Dale a écrit :
Disk /dev/md1: 39068861440 sectors, 18.2 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): EFF29D11-D982-4933-9B57-B836591DEF02
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 31255089118
Le 10/08/2017 à 10:00, to...@tuxteam.de a écrit :
On Wed, Aug 09, 2017 at 08:22:58PM -0400, Gene Heskett wrote:
Aha, another name for PIC, which I've only been writing code that uses it
for 32 years. Also known as PCR, for Program Counter Relative. Such
code can be loaded into memory and
Le 11/08/2017 à 08:32, Gary Dale a écrit :
I eventually tracked the problem down to a UDEV persistent rule (now
deleted) and also the need to modify /etc/network/interfaces to use the
name the name of the new NIC (enp5s0 instead of eth0 - since it wasn't
carried over in the upgrade from
Le 09/08/2017 à 17:05, Dan Ritter a écrit :
On Wed, Aug 09, 2017 at 10:48:24AM -0400, Gene Heskett wrote:
Interesting Thomas, but what the heck is PIE?
It is explained in the link posted by Thomas.
It's a security measure.
No, PIE is not a security measure per se. It just allows to map
Le 08/08/2017 à 12:11, G2PC a écrit :
Le 07/08/2017 à 23:49, Pascal Hambourg a écrit :
Apparemment il n'y a pas de problème de connectivité entre Orange et
l'hébergeur. Donc a priori soit il y a un blocage au niveau du
réseau/box de G2PC, soit il y a un filtrage spécifique de son adresse
IP
Le 08/08/2017 à 01:26, Francois Lafont a écrit :
On 08/07/2017 11:49 PM, Pascal Hambourg wrote:
~$ sudo tcptraceroute 91.216.107.158 80
traceroute to 91.216.107.158 (91.216.107.158), 30 hops max, 60 byte packets
1 router.asus.com (192.168.0.254) 0.389 ms 0.374 ms 0.827 ms
2
Le 07/08/2017 à 07:56, Francois Lafont a écrit :
~$ sudo tcptraceroute 91.216.107.158 80
traceroute to 91.216.107.158 (91.216.107.158), 30 hops max, 60 byte packets
1 router.asus.com (192.168.0.254) 0.389 ms 0.374 ms 0.827 ms
2 192.168.1.1 (192.168.1.1) 1.300 ms 1.462 ms 1.528 ms
Le 06/08/2017 à 23:57, G2PC a écrit :
sudo tcptraceroute 91.216.107.158 80
traceroute to 91.216.107.158 (91.216.107.158), 30 hops max, 60 byte
packets
1 192.168.1.1 (192.168.1.1) 14.199 ms 17.828 ms 17.804 ms
Je n'avais pas fait attention, mais 15 ms pour recevoir une réponse de
la
Le 06/08/2017 à 22:27, G2PC a écrit :
J'utilise, je pense, network-manager, en mode graphique, qui me retourne,
broadcast : 192.168.1.255
masque de sous réseau 255.255.255.0
route par défaut 192.168.1.1
primary DNS 127.0.0.1
cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc
Le 06/08/2017 à 19:31, G2PC a écrit :
Le site, c'est visionduweb.eu hébergé chez LWS
www.visionduweb.eu. 21600 IN CNAME visionduweb.eu.
visionduweb.eu. 21600 IN A 91.216.107.158
Le site a une adresse IPv4, et pas d'adresse IPv6. Se focaliser sur
l'IPv6 était
Le 06/08/2017 à 18:05, G2PC a écrit :
Le 05/08/2017 à 02:12, Pascal Hambourg a écrit :
D'après les tests ci-dessous, tu n'as pas de connectivité IPv6 globale.
Mais je ne vois pas le rapport avec ton site. Il n'est accessible
qu'en IPv6 ?
Je pense être victime de stress test / stress tue
Le 05/08/2017 à 08:03, david...@freevolt.org a écrit :
On Fri, 4 Aug 2017, jakob notland wrote:
Hello dear Debian support
This is not the Debian support. This is a user mailing list.
iptables -t nat -A PREROUTING -i eth0 -d $external_ip -m conntrack
--ctstate NEW -j DNAT --to-destination
Le 05/08/2017 à 11:17, andre_deb...@numericable.fr a écrit :
On Saturday 05 August 2017 11:13:35 Pascal Hambourg wrote:
Le 05/08/2017 à 10:53, andre_deb...@numericable.fr a écrit :
Y a t-il une commande pour faire un reset de grub ?
Qu'appelles-tu un reset de GRUB ?
Effacement des
Le 05/08/2017 à 10:53, andre_deb...@numericable.fr a écrit :
Y a t-il une commande pour faire un reset de grub ?
Qu'appelles-tu un reset de GRUB ?
Le 04/08/2017 à 15:32, G2PC a écrit :
Box orange du domicile. Pas d'accès vers mon site internet hébergé chez
LWS, le site est sur mutualisé, ce n'est pas un vps ni un dédié.
Sinon, j'ai bien un accès total au réseau internet.
D'après les tests ci-dessous, tu n'as pas de connectivité IPv6
Le 04/08/2017 à 11:36, andre_deb...@numericable.fr a écrit :
sdb1 et sdb2 contiennent la sauvegarde de sda2
et son bootable (leur /etc/fstab est adapté pour ça).
Je désire avoir un grub.cfg me permettant de booter
sur sda2, sdb1 et sdb2, avec les UUID corrects mis
automatiquement par
Le 03/08/2017 à 20:37, andre_deb...@numericable.fr a écrit :
Comment recréer un fichier "grub.cfg" correct ?
Sur le disque dur, partition ext4 : sda2.
Deux sauvegardes ext4 sur un 2ème disque dur : sdb1 et sdb2.
Sauvegardes de quoi ? Sous quelle forme ?
Je veux booter sur sdb1 et me
Le 03/08/2017 à 17:20, Joshua Schaeffer a écrit :
Configuration in /etc/network/interfaces only works when NetworkManager isn't
installed,
Wrong. The default NetworkManager behaviour is not to manage interfaces
defined in /etc/network/interfaces.
Le 03/08/2017 à 15:52, Zenaan Harkness a écrit :
On Thu, Aug 03, 2017 at 08:53:27AM -0400, Greg Wooledge wrote:
But the problem is, various Unix DHCP client daemons do *too much*.
All I want them to do is set the IP address, netmask, and gateway.
I *don't* want them to change the system
[Merci d'éviter le top-post]
Le 02/08/2017 à 08:53, Pierre L. a écrit :
mais bon, si on regarde bien, par exemple le kernel qui tourne derrière
24/24 lance aussi à mon avis un bon nombre de services inutiles aux
utilisateurs (gestion bluetooth, ipv6, ModemManager et j'en passe...)...
Le noyau
Le 02/08/2017 à 16:19, Greg Wooledge a écrit :
1) Make sure the Debian "resolvconf" package is *not* installed.
You should reconsider this advice. resolvconf may be your best ally to
handle such a situation.
3) I have utterly no idea how Network-Manager works
Me neither, but I know one
Le 01/08/2017 à 13:13, Alexandre Hoïde a écrit :
Traduction [approximative] de
https://wiki.debian.org/tasksel#A.22standard.22_task
La tâche « utilitaires usuels du système » est une tâche spéciale de
l'installateur Debian. Elle repose sur le paquet « priority ».
Non, elle repose sur la
Le 25/07/2017 à 07:13, solitone a écrit :
I can't remember: is gparted available in debian's installation media?
Gparted is not available in the Debian installer. Only fdisk and parted
are. The Debian installer partitioning tool, partman, is based on
libparted too. It allows to resize a
Le 24/07/2017 à 16:13, solitone a écrit :
I never use MacOs, so I want to just keep debian, so at least I'll put its 22
GB space to better use. I used to keep it just for some sporadic firmware
update, but frankly I don't think I'll need this again in the future.
~$ sudo /sbin/parted /dev/sda
Le 22/07/2017 à 14:52, Felix Miata a écrit :
Pascal Hambourg composed on 2017-07-22 11:03 (UTC+0200):
Felix Miata composed:
at least one primary is always EXT2 with
Grub Legacy and little else, unless the disk is a pure data-only disk, in which
case its MBR sector is empty
Le 21/07/2017 à 08:34, Felix Miata a écrit :
To be clear, in MBR systems I only ever install DOS or OS/2 on a primary
partition. All other OS go on logicals. Except for one ancient PC that has only
WinXP on it (which I did not install), at least one primary is always EXT2 with
Grub Legacy and
Le 21/07/2017 à 04:11, Felix Miata a écrit :
Pascal Hambourg composed on 2017-07-20 23:40 (UTC+0200):
Felix Miata composed:
Grub Legacy requires no scripts or filesystem mounting to
setup, and its menu.lst is magnitudes easier than Grub2's grub.cfg to manually
maintain.
This is your
Le 19/07/2017 à 22:20, Jimmy Johnson a écrit :
On 07/19/2017 11:04 AM, Pascal Hambourg wrote:
Le 19/07/2017 à 11:30, Jimmy Johnson a écrit :
Some of you may already know that setting up grub-legacy on Debian
can be imposable,
Imposable ? What would impose it ?
Debian grub-legacy setup
801 - 900 of 3087 matches
Mail list logo