Håkon Alstadheim wrote:
John Hasler wrote:
[...]
If the modem provides straight ethernet (no pppoe or other specialities
required), then the docs that come with your modem will usually tell you
what ip-address the modem will have.
[...]
In my (limited) experience, the IP is usually
John Hasler wrote:
Andrei writes:
There are modems that also do the pppoe part.
This is true. Those ones also usually also handle NAT and DHCP. They are
often plug and play with any operating system (except for entering the
username and password the ISP gave you via the Web server
On Fri, Dec 28, 2007 at 06:01:34PM -0600, John Hasler wrote:
Don Harwood writes:
att sells the modem to you. when i was talking to them they said there
was a driver disk that i needed to load
You don't need any drivers on Linux and you almost certainly don't need
any on Windows either.
Andrei writes:
There are modems that also do the pppoe part.
This is true. Those ones also usually also handle NAT and DHCP. They are
often plug and play with any operating system (except for entering the
username and password the ISP gave you via the Web server in the modem).
The driver ATT
On Fri, Dec 28, 2007 at 07:05:57PM -0500, Douglas A. Tutty wrote:
On Fri, Dec 28, 2007 at 03:25:00PM -0800, Don Harwood wrote:
the synergy program comes with cad thus an integrated cad/cam system. i
used autocad 10 but that was years ago. actually the driver for the cnc is
emc2, this
Don Harwood wrote:
yes i downloaded the net install cd on my friends dialup
this week end i hope to try my first bootup, i wont get the dsl installed
until next year so i wont be able to get the full package until then my
fingers are crossed
This NewbieDOC article [1] may get you started
On Fri, Dec 28, 2007 at 05:05:57PM -0500, Douglas A. Tutty [EMAIL
PROTECTED] was heard to say:
The keyboard is a slightly different issue as all wireless stuff tends
to be. If it has a driver in the linux kernel supplied by Debian (i.e.
not excluded due to tainted licensing), then it too
Don Harwood wrote:
thanks for the understanding with us newbies, i will probably drop the
wireless kb, thanks for the heads-up about security
As a minor point, keyboards and USB have to be fairly OS-independent, as
if you need to 'press F10 for setup', you need to do it before the BIOS
[This message has also been posted to linux.debian.user.]
In article [EMAIL PROTECTED], Don Harwood wrote:
hello world
I'm a new convert to the debian linux world however I'm starting to get
cold feet with compatibility issues, i just purchased a CNC mill that is
run by a amd64 box with
hello world
I'm a new convert to the debian linux world however I'm starting to get
cold feet with compatibility issues, i just purchased a CNC mill that is
run by a amd64 box with debian linux, i also just had a new box built for
me to do my cad/cam work on. figuring that since one box is linux
On Fri, Dec 28, 2007 at 01:17:00PM -0800, Don Harwood wrote:
hello world
I'm a new convert to the debian linux world however I'm starting to get
cold feet with compatibility issues, i just purchased a CNC mill that is
run by a amd64 box with debian linux, i also just had a new box built
On Fri, Dec 28, 2007 at 11:41:42PM +0200, Andrei Popescu wrote:
If the DSL modem they provide connects through an ethernet port then you
should have no problems. My modem handles all the connection stuff and
even has an integrated firewall. Ironically it is probably running on
linux
On Fri, Dec 28, 2007 at 01:17:00PM -0800, Don Harwood wrote:
I'm a new convert to the debian linux world however I'm starting to get
cold feet with compatibility issues, i just purchased a CNC mill that is
run by a amd64 box with debian linux, i also just had a new box built for
me to do my
On Friday December 28 2007 15:17:00 Don Harwood wrote:
hello world
I'm a new convert to the debian linux world however I'm
starting to get cold feet with compatibility issues, i just
purchased a CNC mill that is run by a amd64 box with debian
linux, i also just had a new box built for me to
On Fri, Dec 28, 2007 at 04:59:17PM -0500, Douglas A. Tutty wrote:
On Fri, Dec 28, 2007 at 11:41:42PM +0200, Andrei Popescu wrote:
If the DSL modem they provide connects through an ethernet port then you
should have no problems. My modem handles all the connection stuff and
even has an
Douglas A. Tutty wrote:
On Fri, Dec 28, 2007 at 11:41:42PM +0200, Andrei Popescu wrote:
If the DSL modem they provide connects through an ethernet port then you
should have no problems. My modem handles all the connection stuff and
even has an integrated firewall. Ironically it is probably
On Fri, 28 Dec 2007 13:17:00 -0800
Don Harwood [EMAIL PROTECTED] wrote:
the next troubling thing i got was when i called att to get dsl
service, they also say they don't support linux. what can be done
with this?
All that means is that they don't know how to help you if you have
questions. I
On Friday December 28 2007 16:14:32 Ken Irving wrote:
On Fri, Dec 28, 2007 at 04:59:17PM -0500, Douglas A. Tutty
wrote:
On Fri, Dec 28, 2007 at 11:41:42PM +0200, Andrei Popescu
wrote:
If the DSL modem they provide connects through an ethernet
port then you should have no problems. My
On Fri, Dec 28, 2007 at 02:26:49PM -0800, Don Harwood wrote:
On Debian lists, we usually keep things on the list. FYI, read the code
of conduct at lists.debian.org.
i currently use Bently microstation V8 at work, however at home with my new
CNC system from Sherline i will be using Synergy by
Ken Irving writes:
Really? They're providing a service (however lamely), and I can't see
why they'd be compelled to provide all the details because of that.
AIUI, they'd need to provide the source code if they modified the GPLd
software, but I don't think mere use of it requires disclosure.
On Fri, Dec 28, 2007 at 01:14:32PM -0900, Ken Irving wrote:
On Fri, Dec 28, 2007 at 04:59:17PM -0500, Douglas A. Tutty wrote:
On Fri, Dec 28, 2007 at 11:41:42PM +0200, Andrei Popescu wrote:
If the DSL modem they provide connects through an ethernet port then you
should have no
Douglas A. Tutty wrote:
On Fri, Dec 28, 2007 at 01:14:32PM -0900, Ken Irving wrote:
On Fri, Dec 28, 2007 at 04:59:17PM -0500, Douglas A. Tutty wrote:
On Fri, Dec 28, 2007 at 11:41:42PM +0200, Andrei Popescu wrote:
If the DSL modem they provide connects through an ethernet port then you
the synergy program comes with cad thus an integrated cad/cam system. i
used autocad 10 but that was years ago. actually the driver for the cnc is
emc2, this translates the g-code into stepper pulses
so i don't just reply in my email i need to go the list or is cc to
yes i downloaded the net install cd on my friends dialup
this week end i hope to try my first bootup, i wont get the dsl installed
until next year so i wont be able to get the full package until then my
fingers are crossed
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
att sells the modem to you. when i was talking to them they said there
was a driver disk that i needed to load, i told them i was on a linux box
and they said they don't support linux i asked them about unix servers and
there tech dud was dumbfounded, so I'm hopping things go well
--
To
Don Harwood wrote:
the synergy program comes with cad thus an integrated cad/cam system. i
used autocad 10 but that was years ago. actually the driver for the cnc is
emc2, this translates the g-code into stepper pulses
so i don't just reply in my email i need to go the list or is cc to
On Sat, Dec 29, 2007 at 08:12:57AM +0900, David wrote:
They're distributing to you the software in binary form in the media of the
modem's memory. Whether or not they modified the GPL code (i.e. to
handle their own hardware) we don't know.
There would /have/ to be some modification,
On Friday December 28 2007 16:48:10 Don Harwood wrote:
Hi Ron
i hope I'm doing this email thing correctly
So far. Except that you completely snipped off my reply. (Not
too much of a big deal.)
the mill comes with a box pre configured with a built in g-code
stepper driver to run the 4
On Fri, Dec 28, 2007 at 03:25:00PM -0800, Don Harwood wrote:
the synergy program comes with cad thus an integrated cad/cam system. i
used autocad 10 but that was years ago. actually the driver for the cnc is
emc2, this translates the g-code into stepper pulses
so i don't just reply in my
On Fri, Dec 28, 2007 at 03:32:15PM -0800, Don Harwood wrote:
yes i downloaded the net install cd on my friends dialup
this week end i hope to try my first bootup, i wont get the dsl installed
until next year so i wont be able to get the full package until then my
fingers are crossed
Don Harwood writes:
att sells the modem to you. when i was talking to them they said there
was a driver disk that i needed to load
You don't need any drivers on Linux and you almost certainly don't need
any on Windows either. If your modem is anything like most others it
contains a Web server
On Fri, Dec 28, 2007 at 04:05:58PM -0800, Don Harwood wrote:
from what i have been
able to find out things may not be so easy, some of this stuff
is overwhelming maybe i bit off to much
The tenor of your conversation screams newbie. Thus, I
On Fri, Dec 28, 2007 at 04:05:58PM -0800, Don Harwood wrote:
...snip confusing quoting...
yes i am a total newbie to the linux world, the reason i chose debian is
because the cnc system is debian, after doing some minor research into it i
decided to keep it simple {yeah right} i will make
On Friday December 28 2007 18:01:34 John Hasler wrote:
Don Harwood writes:
att sells the modem to you. when i was talking to them they
said there was a driver disk that i needed to load
You don't need any drivers on Linux and you almost certainly
don't need any on Windows either. If your
34 matches
Mail list logo
