All,
The RSID feature in Fldigi seems to work very well. It can be setup to
search the entire pass band for incoming RSID's. Just remember to click the
RSID button in the upper right-hand corner to activate it. The green light
means it's armed and ready for RSID reception.
Fldigi will
All,
The RSID feature in Fldigi seems to work very well. It can be setup to
search the entire pass band for incoming RSID's. Just remember to click the
RSID button in the upper right-hand corner to activate it. The green light
means it's armed and ready for RSID reception.
Fldigi will
Yes but nobody ever runs RSID TX ID (except me :-)
I've spent hours with fldigi RSID receive mode turned on just to watch it work
once (and in entire pass band mode). It's never once made a detection and I've
never seen an RSID burst on the waterfall myself.
K*B*l*0*0*Q
--- In
Please Note: The second hour has been changed to 2100 UTC by request.
There is now a limit of FOUR contacts with same
station (different modes)
Please submit your scores (see link below)
Date and time : 1300 to 1400 UTC and 2100-2200 UTC, Each UTC
It is used less than I thought it would be but when added to MixW and
DM780 it should be more common. Both Nick and Simon have expressed
interest in the issue. I hear RSID away from the PSK common
frequencies.
Andy K3UK
On Fri, May 8, 2009 at 6:43 AM, aa777888athotmaildotcom
Is it possible that one of the needed features to use RSID would be that
it could be easily turned on and off for transmitting as it is for
receiving? Otherwise you have to go in to several layers of menus to
turn it off once you make the contact. If it stays on, it takes time at
the beginning
The NZ4O Daily LF/MF/HF/6M Frequency Radiowave Propagation Forecast #2009-14
has been published on Friday 05/08/2009 at 1400 UTC, valid UTC Saturday
05/09/2009 through 2359 UTC Friday 05/15/2009 at
http://www.kn4lf.com/kn4lf6.htm .
73 GUD DX,
Thomas F. Giella, NZ4O
Lakeland, FL, USA
OK, got a question here - and hopefully someone can point me in the
right direction.
I am using the AGW Packet Engine and Winpack for me packet radio
operation - that is all working great. Now, I would like to add airmail
into the mix - I have been told time and time again that you cannot
That's a good idea, Rick. I would like to see that as well. Split the RSID
button up at the top of fldigi into two buttons: TX RSID and RX RSID. It would
be nice to have an enable button for Video ID up there as well. I use Video ID
of mode for CQ a lot. Typically I leave TX RSID turned on but
Good day to everyone!
Many already know, but I wanted to announce to the group that the Feld Hell
Club is sponsoring a Special Event Station during the Dayton Hamvention this
year.
W8H will be on the air using Feld Hell, from 1030 UTC Friday May 15th through
1800 Sunday May 17th. There is a
Rick,
Multipsk has the RSID button up front while Fldigi requires two steps to
turn it off. Not bad once you've done it a few times.
A CQ/RSID macro should work well. There would be no need to turn it on or
off then.
Tony -K2MO
- Original Message -
From: Rick W
All,
I've been using Mixw to send / receive MFSK16 pictures for some time now and
recently found that Multipsk, DM780 and Fldigi are capable of receiving pics.
Not sure if they are capable of sending though. Can anyone shed some light on
this?
Tony -K2MO
Scott,
Take a look here. Question #3015
http://www.winlink.org/faq
73,
Gary N7XOO
--- In digitalradio@yahoogroups.com, Scott firebug...@... wrote:
OK, got a question here - and hopefully someone can point me in the
right direction.
I am using the AGW Packet Engine and Winpack for
--- In digitalradio@yahoogroups.com, Tony d...@... wrote:
All,
I've been using Mixw to send / receive MFSK16 pictures for some time now and
recently found that Multipsk, DM780 and Fldigi are capable of receiving pics.
Not sure if they are capable of sending though. Can anyone shed some
Hello Tony,
With Multipsk, you can RX/TX MFSK16 pictures (which are SSTV pictures in fact
(and not digital pictures), they are simply compatible with the MFSK16
bandwidth). But dimensions of the picture are free.
Here is shown how to use this mode:
Patrick,
Thanks for taking the time to send the MFSK picture docs. I happened to have
your program running with Mixw and was surprised when the picture window popped
open! Didn't know Multipsk had that feature.
Thanks,
Tony -K2MO
- Original Message -
From: Patrick Lindecker
Andy,
I haven't found the way to send MFSK16 images with Fldigi or DM780. I'm sure
both programs are capable, it's just a matter of finding the right buttons ; )
Tony -K2MO
- Original Message -
From: Andrew O'Brien k3uka...@gmail.com
To: digitalradio@yahoogroups.com
Sent: Friday,
In Fldigi, right-click in the text window and select send image.
-Joe, N8FQ
On Fri, 08 May 2009 23:30:42 -0400
Tony d...@optonline.net wrote:
Andy,
I haven't found the way to send MFSK16 images with Fldigi or DM780. I'm sure
both programs are capable, it's just a matter of finding the
18 matches
Mail list logo