In DM780 you can press F1 (I think).
FWIW I'm working on a new logbook which oddly enough will allow me to create
a half-way decent contest interface in DM780.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Tony d...@optonline.net
Anyone know if there's a
I must say that I agree with Bonnie - this is either a poor radio design or
more likely you've got a 'duff' radio.
I don't think the SignaLink is the problem.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: expeditionradio expeditionra...@yahoo.com
It is not
You are overloading the input to the SignaLink - try dropping the audio
output from the radio.
Or - it could actually be the other station :-)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: n4hra lew_j...@att.net
I am having a problem with a new Signalink
MT-63 requires a very accurate soundcard calibration.
1% out of calibration (or even less) and MT-63 struggles.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Leslie Elliott denalid...@gmail.com
Thanks, I kind of figured it out myself. There was a QSO I was
Looks like you and I studied engineering at the same university :-)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andy obrien k3uka...@gmail.com
I gave a BIG wiggle on the
video cable at the PC connector and after about a minute of wiggling,
akin to just
Forget the very small dongles - in the UK why not a Edirol UA-1EX from
http://www.imuso.co.uk/ProductDetail.asp?StockCode=ST00605 ? Just check
driver availability for your operating system.
I use a USInterface.com Navigator and EDIROL FA-66 but that's an expensive
option albeit excellent!
Free inside Switzerland - works great with XP, just surplus to my requirements
now.
http://www.m-audio.com/products/en_us/Delta44.html
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
Nice try :-)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Graham g0...@hotmail.com
If I look closely I can just see the top of snaefell .. if thats worth any
points ?
FLDIGI and the new Thor mode?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andy obrien [EMAIL PROTECTED]
It is that time again, time to think about nominees for the 5th Annual
Digitalradio Awards. Please email your suggestions, I will publish
the winners
Vojtech,
If you can improve this with Pawel's code base many developers would be most
grateful :-)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Vojtech Bubnik [EMAIL PROTECTED]
I believe Pawel's code may be improved to decrease time lag in case
the
Been watching the Muppet show today Andy :-) ?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien
Just ran in to someone that uses a RF Space SDR-IQ RX , looks very useful.
Anyone in this group using one for ham digital mode monitoring ?
The lag is in the software - it's part of the design for the error
correction. Where error correction is part of the design then *in general*
with Ham modes you have to wait a while before text is decoding is the error
correction is applied. The lag is not caused by CPU load.
To really
MIPS shouldn't have any effect as long as the CPU doesn't run at 100%.
Olivia likes a calibrated soundcard.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: captcurt2000 [EMAIL PROTECTED]
How are you going to make sense of the variety of MIPS performance
Nope - the code is almost the same - it'll be soundcard calibration issues.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Cortland [EMAIL PROTECTED]
Just this morning I came across a net running in Olivia 8-tone/1000Hz.
It decoded poorly in one SW package,
This is a windows-only question.
It a SDR application were to make data available for use in digital mode
programs using something other than a virtual soundcard, what options would be
feasible?
TCP/IP server?
Mailslots?
I want to be sure that I haven't missed the obvious here.
Simon Brown,
It means that the drivers are better - the internal clock runs at 48kHz,
other rates are created by either the driver or (very often) Windows.
Windows XP does not do a good job of this, VISTA however is excellent at
converting the sample rates.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
A significant difference between TX and RX can result in an offset. During
my holidays in Oct / Nov I will add full soundcard calibration for all modes
in DM780.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Dave [EMAIL PROTECTED]
What impact, if any, does
Dave,
IMO any data program will be talking to the soundcard with a nice big FIFO so
CPU shouldn't be an issue. From memory I use a 10 second FIFO on receive and 2
second on transmit.
I can't think of any problems that could arise as long as there are some free
CPU cycles. What am I missing?
DM780 samples at 8kHz and has a lot of encoder / decoder code in common with
fldigi. MT63 / Olivia having being taken from Pavel's original code.
I'll try to find the Microsoft Blog entries which explain why some rates such
as 11,025Hz are so poor with W2K / XP but not with VISTA.
It's not a
I'm sure fldigi uses 8kHz in general and 11,025 when needed for some Thor /
DominoEx modes.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
The sample rates were 11025 Hz for Mixw and IZ8BLY MT63 terminal. Looks
like
8000 Hz for DM780 and Multipsk. Not sure
- Original Message -
From: Dave [EMAIL PROTECTED]
When I got my current sound card, the first thing I did was to run
the various calibration routines from MMTTY, DM780, and MultiPSK.
These calibration routines showed the card was off by 181 parts-per-
million. I set up the various
I think you get a soundcard on the PC - just like with the SignaLink USB,
Navigator etc.
Also I'm sure the sound is available via the rear connectors.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Rein Couperus [EMAIL PROTECTED]
This means flexibility is
I agree with Skip. My guess is a driver issue.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: kh6ty [EMAIL PROTECTED]
I seriously doubt that your problems are caused by the SoundBlaster or
fldigi, but most likely by something we do not know about your
OMG, should have been: 'Only members of that group...' !
I tried to join some years ago - got blacklisted!
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Simon Brown (KNS) [EMAIL PROTECTED]
Only member so the that group can read the messages - could you post
Andy,
You *cannot* use CAT for PTT with the TS-2000 and provide audio via the rear
connector. You must toggle a ACC pin for PTT - see the DM780 PTT page.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien [EMAIL PROTECTED]
So much for emergency
Andy, Please explain how to disable a group from Grouply please.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien [EMAIL PROTECTED]
Bonnie alerted me to this today, FYI this Yahoogroup has been disabled
from Grouply, so all should be ok
Thanks.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien [EMAIL PROTECTED]
Go to http://www.grouply.com/owner_controls.php, see bottom of page,
click on link a bottom of page , then at next page enter in your owner
email address for the group,
To be honest, no - I will look into this tomorrow as I have a feeling I can
stop it inside the HRD code but it's something you've got on your system
which causes this :-(
I think I stopped it with the IE browsers inside DM780. I assume it's HRD
causing the problem, not DM780?
Simon Brown,
I really hope the code or at least a DLL is made available. Anything to get
rid of PACTOR III has my vote (I do not like the licencing issues involved).
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Bob Donnell [EMAIL PROTECTED]
Looks interesting. I wonder
I have one here - I think it's excellent. Currently driving a TS-2000, also
use it with the K3.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: wb4lzq [EMAIL PROTECTED]
Is anyone using one? If so your comments would be appreciated.
Yes, I've been using and recommending Neil's products since almost the day
he started, he was a close friend of Peter PH1PH (SK).
A real good egg is Neil.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien [EMAIL PROTECTED]
Anyone familiar with
Quote from Neil's website:
This new product will ship on Monday 25th August 2008
Shirley Monday's a bank holiday :-)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien [EMAIL PROTECTED]
http://www.g4zlp.co.uk/unified/DM_AudioPRO_complete.shtml
It's a brand-new shiny product.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: [EMAIL PROTECTED]
idle curiosity but is this a reverse engineered or just a rebranded
Tigertronics SL/USB???
Put back a few days, I forgot something :-(
Some pics anyway -
http://www.ham-radio-deluxe.com/Programs/HRDSatelliteTracking/tabid/97/Default.aspx
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien [EMAIL PROTECTED]
This may be released to the
34 matches
Mail list logo