If you disabled Serial Enumeration and Modem Control at Startup, as shown
by screenshots in this document:
https://bit.ly/FTDItip
but the rig still keys when you connect the USB cable or turn on the PC,
then you may need to do it again, especially if the cable was moved to a
different USB port
lf Of Rip R
Sent: Monday, April 18, 2022 18:51
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 auto transmit - W7RIP
Thanks for the help W0VTT, AB7E, & K6MKF. I tried each advice as I received it
and thought I had it fixed until today. I had been switching out antenna feeds
when the ri
Thanks for the help W0VTT, AB7E, & K6MKF. I tried each advice as I received
it and thought I had it fixed until today. I had been switching out
antenna feeds when the rig transmitted as before. I think the changes in
the PC (Win 10 device mgr) that Mike W0VTT suggested may be the ultimate
W0VTT
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Rip R
Sent: Wednesday, 13 April, 2022 13:59
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 auto transmit - W7RIP
My K3 works like a charm and I have never had an issue with it. But recently
after I turn t
I beleive that's your computer establishing serial contact with your
K3. It won't happen if you aren't connected.
73,
Dave AB7E
On 4/13/2022 11:58 AM, Rip R wrote:
My K3 works like a charm and I have never had an issue with it. But
recently after I turn the rig on or shortly after I
My K3 works like a charm and I have never had an issue with it. But
recently after I turn the rig on or shortly after I turn it on, it will
automatically transmit a series of 5 or 6 cw dashes evenly spaced (good
fist) and at about 15 wpm. This will not occur again until the next time
the rig is
6 matches
Mail list logo
