Re: [Elecraft] K4 interface to KPA-1500

2021-04-30 Thread Bob Wilson, N6TV
gt; From: "Bob Wilson, N6TV" > To: "James F. Boehner, MD" > Cc: "Elecraft Reflector" > Sent: 30/04/2021 05:38:24 > Subject: Re: [Elecraft] K4 interface to KPA-1500 > > >Also be sure to set RADIO TYPE to

Re: [Elecraft] K4 interface to KPA-1500

2021-04-30 Thread Alan - G4GNX
Is there an update to the KPA500 firmware that reflects the K4? 73, Alan. G4GNX -- Original Message -- From: "Bob Wilson, N6TV" To: "James F. Boehner, MD" Cc: "Elecraft Reflector" Sent: 30/04/2021 05:38:24 Subject: Re: [Elecraft] K4 interface to KPA-15

Re: [Elecraft] K4 interface to KPA-1500

2021-04-29 Thread Bob Wilson, N6TV
Also be sure to set RADIO TYPE to K4 in the KPA1500 menu. If you don't see it listed, upgrade the KPA1500 firmware. 73, Bob, N6TV On Thu, Apr 29, 2021, 9:16 PM James F. Boehner, MD via Elecraft < elecraft@mailman.qth.net> wrote: > Is there information anywhere on how to interface the K4 to a

Re: [Elecraft] K4 interface to KPA-1500

2021-04-29 Thread Bob Wilson, N6TV
Yes, identical AUX cable (and/or Y-BOX) works fine. TX Sample is not yet implemented (could be a while). I recommend leaving that connector unused until further notice. 73, Bob, N6TV https://bit.ly/Y-BOX On Thu, Apr 29, 2021, 9:16 PM James F. Boehner, MD via Elecraft <

[Elecraft] K4 interface to KPA-1500

2021-04-29 Thread James F. Boehner, MD via Elecraft
Is there information anywhere on how to interface the K4 to a KPA-1500 with the use of a KPAK3AUX cable? Is it straightforward as with the K3? Is there a direct connection between the Tx sample connectors on the two units? Is there a setting in the K4 that must be made to use the Tx sample?