Am Samstag, 28. September 2002 02:02 schrieb Vox:
rpm --rebuilddb
hi,
first at all thanks for your mail and help !
was running now rpm --rebuilddb and got this here :
Fehler: rpmdb: damaged header instance #615 retrieved, skipping.
does anyone know, what this stand for ?
thanks one time
On Fri, Sep 27, 2002 at 19:38 -0400, Dave Seff wrote:
I right click on the gkrellm that shows up in the taskbar, then go to -
To Desktop - all Desktops
Yes, that's what I thought it should do. But it doesn't. When I
rightclick on the gkrellm-placeholder in the taskbar I only get the
options
I want to convert my filesystems from ext2 to ext3. However, currently,
kernel support for ext3 is built in as module support. I'm running
kernel 2.4.19 which I built from the source.
My question is, does ext3 support need to be built directly into the
kernel itself rather than as a module?
I have just got a PCMCIA ieee1394 card which I am trying to get to
work with Mandrake 8.1 and a self-compiled kernel 2.4.19. That made
me discover the hotplug functionality from the hotplug package. So
far I have been naïve enough to believe that the cardbus hotplugging
was controlled just by
Hi Everyone,
Have been successfully been using software RAID with Mandrake.. but
there is a error message on startup, that i would like to get rid of..
request_module[md-personality-2]: Root fs not mounted
md: personality 2 is not loaded!
I actually get this error for each raid device, it
HI Everyone,
Just trying to workout why I have a Raid 0 that is slower that a Raid 1
device..
Now I have here a /dev/md0 which is a Raid1 and /dev/md4 which is Raid0
now using hdparm to test the speed..
# hdparm -Tt /dev/md0
/dev/md0:
Timing buffer-cache reads: 128 MB in 0.52 seconds
On Sat, 28 Sep 2002 13:10:43 +0200
Wolfgang Bornath [EMAIL PROTECTED] wrote:
nybody seen ncurses-devel for 9.0? I only see ncurses 5.2-27 on the
CDs and on the Mandrake server, no ncurses-devel.
libncurses5-devel-5.2-27mdk
It is included in the cds.
Mandrake uses librrafication for all apps
On Sat, Sep 28, 2002 at 07:24 -0400, Charles A Edwards wrote:
On Sat, 28 Sep 2002 13:10:43 +0200
Wolfgang Bornath [EMAIL PROTECTED] wrote:
nybody seen ncurses-devel for 9.0? I only see ncurses 5.2-27 on the
CDs and on the Mandrake server, no ncurses-devel.
libncurses5-devel-5.2-27mdk
On Saturday 28 September 2002 03:34 am, you wrote:
I want to convert my filesystems from ext2 to ext3. However, currently,
kernel support for ext3 is built in as module support. I'm running
kernel 2.4.19 which I built from the source.
My question is, does ext3 support need to be built
Hey,
next day, next problem:
Anybody seen ncurses-devel for 9.0? I only see ncurses 5.2-27 on the
CDs and on the Mandrake server, no ncurses-devel.
RPMFind shows only ncurses-devel 5.2-12mdk as src rpm for cooker.
It is needed for compiling the AVM driver for FritzCard DSL.
wobo
--
If you
damnit!
whatever I do with rpm it gives me:
rpmdb: region error detected; run recovery.
error: db4 error(-30981) from dbenv-open: DB_RUNRECOVERY: Fatal error, run database
recovery
error: cannot open Packages index using db3 - (-30981)
rpm --rebuilddb gives the same result OF COURSE.
it
On Thu, 2002-09-26 at 20:59, s wrote:
Hi gang,
I have a little mystery going on here that isn't really distro or
version specific as I've had it happen to me for many many mandrake
releases and in Slackware. But something somewhere somehow for some
reason is creating an empty .xinitrc
rtfm.
I solved it.
'remove /var/lib/rpm/__db*'
http://www.rpm.org/hintskinks/repairdb/
- Original Message -
From: Marco Romeny [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, September 28, 2002 15:45
Subject: [expert] rpm db4?
damnit!
whatever I do with rpm it gives
I installed Mandrake 9 yesterday, no apparent problems. I tried using my HP
5p SCSI scanner today and xsane can't see it. If I do cat /proc/scsi/scsi
both my SCSI devices are recognized. I have a CD burner set up as IDE-SCSI
that had been working fine along with the scanner. Now neither work. I
__
Do you Yahoo!?
New DSL Internet Access from SBC Yahoo!
http://sbc.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Alastair Scott wrote:
On 26 Sep 2002 20:30:26 -0700 James Sparenberg [EMAIL PROTECTED] wrote:
Is anyone else been receiving blank e-mails from people they don't
know. I get 2 or 3 a week always blank no attachment just the header..
never from the same address...
I think this is the
On Fri, 2002-09-27 at 18:10, Todd Lyons wrote:
However, it doesn't want to eject: the eject button is ignored until I log
out of KDE, only then I get my disk back. It seems the unmounting part is not
working?
This is a KDE issue. There's nothing you can do about it because that's
the
just got one of them through the list... from a Jimmie
Kesterquestion is ... was it only blank for me? (except for the MDK
added footer that is
James
On Sat, 2002-09-28 at 08:45, Mark Weaver wrote:
Alastair Scott wrote:
On 26 Sep 2002 20:30:26 -0700 James Sparenberg [EMAIL
Hi all,
I just got MDK 9.0 last night. I remember that I used to be able to just
boot with 2nd cd and do a network install from ftp with all versions of
8, but 9.0 is not letting me do it. Did I miss something somewhere?
TIA
Robin
Want to buy your Pack or Services from MandrakeSoft?
Go
Hi, just installed 9.0, rpmdrake takes at least 25 secs to open, before
it was 2 secs then 5 secs loading the rpm db etc.
Anyone else experienced this? got a solution
JG
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi,
I have tried GCombust, ERoaster, K3B... all of them seem to work but
at the end my CD is not burnt.
I do not have strange messages, I have logs as to which each MB is
written but at the end..
I wouldn't like to reboot to Windows just for burining the new MDK 9.0 CDs.
Anyone has an
On 28 Sep 2002 at 10:37, James Sparenberg wrote:
was it only blank for me? (except for the MDK
added footer that is
It was blank for me also.
Ray Warren
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Saturday 28 September 2002 01:28 pm, Stefano Pogliani wrote:
Hi,
I have tried GCombust, ERoaster, K3B... all of them seem to
work but at the end my CD is not burnt.
I do not have strange messages, I have logs as to which each MB is
written but at the end..
I wouldn't like to
On Saturday 28 September 2002 02:28 pm, you wrote:
Hi,
I have tried GCombust, ERoaster, K3B... all of them seem to work but
at the end my CD is not burnt.
I do not have strange messages, I have logs as to which each MB is
written but at the end..
I wouldn't like to reboot to
FWIW: I noticed my cdrom acting flakey under KDE (it would eject when I
pressed the button, but then immediately retract...) and the 'Eject' option
on the icon didn't work. Since this is an upgraded system (MDK 8.2 - MDK
9.0), I deleted the icon and re-created it--and it seems to work just
I need to configure Postfix so I can use mutt and slrn. Postfix seems pretty
simple but I'm a little gunshy because the only other time I configured it,
it worked fine but I ended having my root mail go directly to the
administrator at mail provider. He got pretty upset after a while..
Here
I think you get around this by using an initrd. Check out man
mkinitrd.
BillK
On Sat, 2002-09-28 at 19:53, et wrote:
On Saturday 28 September 2002 03:34 am, you wrote:
I want to convert my filesystems from ext2 to ext3. However, currently,
kernel support for ext3 is built in as module
On Saturday 28 September 2002 02:12 am, you wrote:
DL,
I know we've been over this before, you and I, but have you tried
checking out supermount under LM90 yet?
Nope, not yet - was gonna wait for the full release version (I have more luck
with those)
I thought I'd give it a whirl since
Hi.
On Sat 2002-09-28 at 20:20:37 +1000, Mark Williamson wrote:
Just trying to workout why I have a Raid 0 that is slower that a
Raid 1 device..
Why do you think that this shouldn't be the case? AFAIK, usually
RAID0 is at most comparable to RAID1 on reading speed, but may be
slower
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi:
I am contemplating building a new system. The two motherboards that I am
looking at are, one a MSI KT3 Ultra2 w/o raid, lan, and video, and two a MSI
KT4 Ultra w/o raid, lan, and video. This will be my primary workstation. I am
wondering will
na, I think old Jimmie is learning and just subscribed to both the newbie and
the expert list and sent a blank mail to each by mistake, my guess
On Saturday 28 September 2002 01:37 pm, you wrote:
just got one of them through the list... from a Jimmie
Kesterquestion is ... was it only
Well, as it turns out, I decided to recompile th kernel. Of course, this
time, I made sure that ext3 support was built in. :)
Rick
On Sat, 2002-09-28 at 15:18, William Kenworthy wrote:
I think you get around this by using an initrd. Check out man
mkinitrd.
BillK
On Sat, 2002-09-28 at
K3B and ERoaster were used without the dummy. So they should have been
able to do the job
/stefano
s wrote:
On Saturday 28 September 2002 01:28 pm, Stefano Pogliani wrote:
Hi,
I have tried GCombust, ERoaster, K3B... all of them seem to
work but at the end my CD is not burnt.
I do not
Anybody else having trouble installing the Nvidia chipset 440 128MB of ram?
It absolutely will not install for me. ? This card is an MSI card and it is
supposed to be fully supported I thought. ?? I keep getting a (EE) No devices
detected error message.
It surely looks serious and bad and
cdrecord -scanbus gives me the following:
Cdrecord 1.11a31 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) 'SEAGATE ' 'ST318203LW ' '0001' Disk
0,1,0 1) 'QUANTUM '
020928 Lorne wrote:
Anybody else having trouble installing the Nvidia chipset 440 128MB of ram?
--- big snip ---
(--) Assigning device section with no busID to primary device
(EE) No devices detected.
Fatal server error:
no screens found
IIRC i had that when i tried a screen size my
Hi Benjamin,
Thanks for your insight into the reasons why this may be the case, and I
agree with your assumptions, I really only added the RAID0 at the end
drives with some left over space just to see what RAID0 was like.. One
thing I know is that Mandrake makes setting up RAID a joy..
Cheers
On Saturday 28 September 2002 18:57, Lorne wrote:
Anybody else having trouble installing the Nvidia chipset 440 128MB of ram?
It absolutely will not install for me. ? This card is an MSI card and it is
supposed to be fully supported I thought. ?? I keep getting a (EE) No
devices detected
On Saturday 28 September 2002 07:27 pm, you wrote:
cdrecord -scanbus gives me the following:
Cdrecord 1.11a31 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) 'SEAGATE '
On Saturday 28 September 2002 12:28 pm, Stefano Pogliani wrote:
Hi,
I have tried GCombust, ERoaster, K3B... all of them seem to work but
at the end my CD is not burnt.
I do not have strange messages, I have logs as to which each MB is
written but at the end..
I wouldn't like to
Is there any suggestions left?
Joe
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, September 26, 2002 4:03 PM
Subject: Re: [expert] Mandrake 8.2/9.0 bad cmos checksum error
On Thu, 26 Sep 2002, Joseph Stegner wrote:
Here's the
Em Sab 28 Set 2002 15:28, Stefano Pogliani escreveu:
I could only burn my mdk90 set with a **very slow** speed (2) with cdrecord
and high quality cd's!
It as long, long really long ... but it the job was done!
[]s Ricardo Castanho
Hi,
I have tried GCombust, ERoaster, K3B... all of
Well, I'd bypass the frontends and go straight for cdrecord next.
Something like:
cdrecord -v dev=2,0,0 speed=4 Mandrake9.0-cd1-inst.i586.iso
and maybe even try -dao too as I've read of many having to use that
for the larger isos.
maybe try that and see.
-s
On Saturday 28 September 2002
020928 various people wrote:
the eject button is ignored until I log out of KDE:
only then I get my disk back. It seems the unmounting part is not working?
---
This is a KDE issue.
---
I've installed winblows replacement systems for friends using KDE
and seen the mount problems. Esp with
Ricardo Castanho de Oliveira Freitas wrote:
Em Sab 28 Set 2002 15:28, Stefano Pogliani escreveu:
I could only burn my mdk90 set with a **very slow** speed (2) with cdrecord
and high quality cd's!
It as long, long really long ... but it the job was done!
[]s Ricardo Castanho
Hi,
I
Hi guys!
Recently converted another M$ user to LM8.2 and have a problem...
The printer is a Canon C5500 multifunction printer which works fine under
W9x. Under LM8.2, everything *appears* to work -- file seems to be sent
to printer, long files stay queued/active for longer time vs short files,
Hi you guys: first, let me tell you, this is the first
install that went ZERO trouble for me... it always
crashed when i tried to do a boot disk, NICE WORK!!!.
Anyway, i thougt i could work with the new 9.0 but my
happiness ended when i tried to load KDE. After log
in, and before the loading
On Saturday 28 September 2002 09:59 pm, you wrote:
Is there any suggestions left?
have you tried to boot with an alternate kernel inage from the 2.2.x series
kernels?
Joe
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, September 26,
Which printing system are you using? I've only used CUPS without any
problems. If you're using CUPS, direct your browser to
http://localhost:631 You can manage your printer from there.
Cheers,
Randy
On Sat, 2002-09-28 at 22:24, Pierre Fortin wrote:
Hi guys!
Recently converted another
Well i've tried some things that i found on the
internet. I'm sending the files that have the messages
that i've recieved when i used dcopserver --nosid
(file: log.txt) and startkde (logs2.txt). About the
nspluginscan, i modified the /usr/bin/startkde ,
commenting the line that has the
Hi,
I shot myself in the foot once and got this exact same behavior. I
had messed up my DNS and MY postfix couldn't resolve MY host name.
I had accidently deleted the host name that resolves to postfix's
$myhostname.
Hope this helps,
Bill Shirley
-Original Message-
From: [EMAIL
I have tried all the Nvidia drivers that mandrake had built in. There were
like 6 of them. Did you mean nvidia linux drivers? I haven't found those yet.
On Saturday 28 September 2002 06:47 pm, you wrote:
On Saturday 28 September 2002 18:57, Lorne wrote:
Anybody else having trouble installing
Don't 8.2/9.0 use different kernel images?
- Original Message -
From: et [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, September 28, 2002 11:08 PM
Subject: Re: [expert] Mandrake 8.2/9.0 bad cmos checksum error
On Saturday 28 September 2002 09:59 pm, you wrote:
Is there any
Please try these:
http://download.nvidia.com/XFree86_40/1.0-3123/NVIDIA_GLX-1.0-3123.tar.gz
http://download.nvidia.com/XFree86_40/1.0-3123/NVIDIA_kernel-1.0-3123.tar.gz
ppl have soo much trouble with the rpms. just untar these and type:
'make' as root without single quotes in each resulting
54 matches
Mail list logo