Re: [Flexradio] small, dedicated computer for F5Ka

I completely agree with {and I added my comments} and I double braced {{key concepts}}: 1. The machine has to be able to run PowerSDR with two receivers sampling at 192KHz, VAC, com0com, ddutil, HRD, DM780, fldigi ... at least. Anything less is not enough. BTW, {{I consider VAC, com0com,

Re: [Flexradio] 5000 shutting down on X-mitt

Can you describe how you are transmitting and in what mode? Unless there is a problem with the fan, it is really difficult to get the radio to shut down due to excessive heat. I would suspect RFI getting into the Firewire cable. You can monitor the PA temperature by typing SHIFT+CRTL+I

[Flexradio] typo in my subject 3676.00 is a SSB frequency

I meant to say 3676.00 is a SSB frequency. I searched the pwsdr.mdb file and it appears to correctly denote such a frequency as SSB. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

Re: [Flexradio] typo in my subject 3676.00 is a SSB frequency

Set up Portmon to look at the CAT messages being sent from the packet cluster software to PowerSDR. If you see a change mode Kenwood CAT command (MD), you have found the culprit. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]

[Flexradio] New UTC time for the Flex net on 20m - no local time change

FYI, Due to the time change in the US tomorrow AM, the UTC time for the FlexRadio net on 20m has changed to 1800 UTC. The time of the net has NOT changed from your previous local time. If the net was on at 2:00 PM last week, it will be on at 2:00 PM tomorrow. -Tim - W4TME

Re: [Flexradio] New UTC time for the Flex net on 20m - no local time change

Tim Ellison wrote: FYI, Due to the time change in the US tomorrow AM, the UTC time for the FlexRadio net on 20m has changed to 1800 UTC. The time of the net has NOT changed from your previous local time. If the net was on at 2:00 PM last week, it will be on at 2:00 PM tomorrow.

Re: [Flexradio] 5000 shutting down on X-mitt

Jim, Make sure the powersupply is not dropping out on you or maybe a poor power connection from the supply.I once had a fuse develop a dislike for high current, but would not blow. 73, Dudley WA5QPZ Jim Menefee wrote: My 5000 has started shutting down during transmission. When I

[Flexradio] Sunday Flex Net - Daylight Savings time Still 1 PM Central, 2 PM Eastern

Folks, For those that get on 20 meters, 14.329 mhz for the Flex Net, I still plan to be there local time at 1 PM Central, (1800 UTC) also on CQ100 via QSLnet.com (14.329) and EchoLink, (WA5QPZ or node 79336) 73, Dudley WA5QPZ ___