I uninstalled the PSDRDT utility and ran the entire PowerSDR 2.7.2 setup again.
Made sure to update the PSDRDT utility first and then exited the program and
ran it again, everything worked fine this time around.
All settings seem to have been carried over (although the log shows some error
Hello, after changing my SDR version to the latest, I've noticed that my
Automatic Notch Filter is just
stuttering rather than notching on my Flex 5000.
Jim Reed, W3RYJ...
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
I have noticed this same effect in previous releases but it is
significantly worse in the latest.
Jim
W4YXU
On Tue, Dec 17, 2013 at 5:43 AM, J. Reed jhr...@frontier.com wrote:
Hello, after changing my SDR version to the latest, I've noticed that my
Automatic Notch Filter is just
stuttering
What is your sampling rate and DSP buffer sizes? If you are using a high
sampling rate and large DSP buffer, try a lower sampling rate and/or smaller RX
DSP buffer size and see if it makes a difference.
-Tim
---
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems
(Sent from my
Hi Dave,
Since I was able to do a transfer, once, I am going to sit this one out and
play with the new 2.7.2. I
didn't see anything for satellite operators in the official list, but maybe I
will find something. I
figure the guys in Austin and Terre Haute will have a proper fix worked out
soon,
FWIW I'm getting all the same errors and I haven't been able to do the
transfer even once (from 2.6.4 to 2.7.2)
Phil
G3UGK
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Alan
Sent: 17 December 2013 12:56
To: 'David W0DHB';
OK, following the lead of ON4AMG. I am not a beta tester so I had only
one copy of PSDR2.7.2 and PSDR-DT. However, I uinstalled and reinstalled
both. This time I ran PSDR-DT before doing anything else and selected
Options. One difference I noticed immediately was that the Setup Data
URL box
Thanks.
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web: www.flexradio.com http://www.flexradio.com
logo
On 12/16/2013 4:25 PM, Alan wrote:
That's it :-) Worked for me too. Thanks Rich
Phil
G3UGK
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Rich
- W3ZJ
Sent: 17 December 2013 13:41
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available
OK,
Rich: This process worked for me as well. Up and running as always. Thanks
to all!
73, Tom
K1FR
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Rich
- W3ZJ
Sent: Tuesday, December 17, 2013 8:41 AM
To: flexradio@flex-radio.biz
Subject: Re:
So (he enquired meekly) is it safe for us mere humans to upgrade to the new
PSDR release yet or should we wait for the wailing siren signal to proclaim
the ALL CLEAR pattern?
Anything besides blind obedience to the instructions required?
Thanks for any assistance as I am NOT a PC guru.
Patrick, NJ5G
I would say go for it. Not everyone is having the problems that
has been listed here.
Good Luck and enjoy.
73
Don, kd6hq
-Original Message-
From: Patrick Greenlee
Sent: Tuesday, December 17, 2013 6:38 AM
To: t...@flexradio.com ; flexradio@flex-radio.biz
Subject: Re:
I read the instructions before installing and don't recall seeing
anything about updating the PowerSDR-DataTrnasfer Setup Data but that's
probably what did the trick. Now it seems to be working fine. That URL
that It's giving you a big warning not to change should be
Just swallowing a huge serving of Humble Pie
I fixed up 2.6.4 so it would work with the new FireWire driver and loaded PSDR
2.6.4 on both Flex-1500 and Flex –3000. I could have sworn that I had adjusted
the EQ on the 1500 (in fact I’m sure I did) but now the EQ on 2.6.4 on the 1500
on my
The choice of ANT 1 for RX2 seems to have been eliminated in this version.
This is bad for my install:
I have ANT 2 going to an amp and then a SteppIR vertical, and ANT1 going
directly to a dipole. Previously, I could use PSDR's antenna switching to
direct the dipole either to RX2 for
To recreate:
1)Go to 20 meters and set Preamp to Pre2'
2)Go to 40 meters and set Preamp to Pre1
3)Go back to 20 meters, Preamp shows Pre1 (but is is not really)
4)Set Preamp to Pre2 notice the lack of difference (because it
really is still on Pre2)
5)Set Preamp to Pre1 and
Jim,
See my comments in-line below.
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web: www.flexradio.com http://www.flexradio.com
logo
On
Please see my comments below
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web: www.flexradio.com http://www.flexradio.com
logo
On 12/17/2013
Gosh, I would hope that this data transfer thing doesn't prevent anyone from
enjoying 2.7.2 ! Gerald is giving us something really wonderful and I can
tell you I am most pleased! This release is a really super advancement of
PowerSDR !
73
Lee K9WRU
- Original Message -
From:
Travis :
I am using the Bose Companion 2 speakers with my Flex-1500 and I really like
them.
The pair cost me less than $100.
Michael VE3WMB
P.S. Lots of audio out of the headphone jack on the speakers to drive my Yahama
CM-500 headset.
P.P.S. A couple of nice features, they run on 12V so
Here is what I found. If you make the mistake of attempting to start
PSDR-DT while PSDR is running it pops up a message telling you that you
must close PSDR first. If you then click cancel, close PSDR and attempt
to start PSDR-DT again it will open but the Setup Data is wiped out and
the Setup
While someone is looking at pre amp issues, in the existing 2.6.4, on
7mhz ssb, the preamp selection for the flex 3000 does not work properly.
It acts as an attenuator when pre 1 is selected.
Thanks
--
If you forward or copy this message, please delete any reference to my
email address. Thanks
I don't think I'm going to upgrade right now. My Flex 1500 is running just
fine with 2.6.3558 ( Had problems with 2.6.4)
Think I will wait for all the bugs to get ironed out.
Rick Kd4jrx
--
From: Rich - W3ZJ r...@w3zj.com
Sent: Tuesday, December
Think I will wait for all the bugs to get ironed out.
Rick Kd4jrx
I thought those were features :-)
Paul, W8AEF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Wise move
On Tuesday, December 17, 2013 4:29 PM, Paul Playford w8...@q.com wrote:
Think I will wait for all the bugs to get ironed out.
Rick Kd4jrx
I thought those were features :-)
Paul, W8AEF
___
FlexRadio Systems Mailing List
You know this is the first problem I have had on install since 2010
But trying to transfer database settings from 2.6.4 to 2.7.2 I get the above
error with a generic .net error messga e Object reference not set to an
instance of an object
Any quick cures?
Cheers
Steve
Only 3 Days Left !
Dear SDR-1000 users,
Let me present a new solution for you.
It is called USB2SDR, is ready-made and whereas so far it was used in
homebrew rigs, now by including the top notch ADC AK5394A ADC having 123dB
dynamic range and additionally a dedicated controller specifically
I just did the upgrade, all went smoothly including DT.
I'm getting some pretty bad flickering on the waterfall and
panafall displays, changing frame rates has no effect.
Flex 5k, Win7 32 bit. HD6870 video.
Ron
K0IDT
___
FlexRadio Systems Mailing
28 matches
Mail list logo
