Good morning to all
I recently bought the Ameritron ALS 600 Auto Amp. I can not load it properly
to save my life. As soon as I start to transmit it jumps to Load Fault.
The AMP test well in a dummy load. I know the flex 3000 does not have a ALC
connection and I have read and understand the
I ran an ALS-600 with a 5000 for a very short time but went back to my
AL-572. The problem was NOT with the Flex, my antenna was just not a good
match without a tuner for the solid state amp. The ALS-600 requires a very
low SWR or it will quickly go into fault.
73,
Tim N9RO
-Original
According to the manual, this is likely caused either by high SWR or
overdriving the amp:
*If the reflected power exceeds 50 watts the power level should be reduced
until the reflected power indicated on the internal meter is 50 watts or
less on peaks. At approximately 75 watts of reflected power
Bill, I had this problem twice with my Alpha 8406 amp. The first time was a
bad used Alpha Delta coax switch I had picked up at the Plano Hamcom and the
second time I was in a winter storm and the ice was essentially shorting out my
beam. When the weather breaks you may not have a problem at
I have for sale a very clean Flex 5000A and a FlexControl unit. The radio is
stock, no second receiver or auto tuner. Works as it should. I am the
original owner, purchased in 2010. Non-smoking and no pet environment.
Looking for $1900 plus shipping. If you want, I can include my TI
Bill,
I use my Flex 5000A with an ALS-600 and the only time it ever faults is
when I forget to manually set the amp's bandswitch to the correct
frequency range. The first question I would ask is if you transmit into
a 50 ohm dummy load does the amp behave correctly? Since you are using
the
hi
i have two flex 5000a for sale
one have all option in 2nd rx atu +more
2nd is like new was a back up come with Atu + extra option
for picture and more info on all option please ask please off the list to my
personal e-mail address.
all box non smoking home top condition .will sale in EU
I operate remote better than 50 percent of the time. Since VOX on VAC no longer
works on later versions of SDR, is there a way to make a LARGE MOX button so I
can easily click on it from an IPhone or IPad?
Thanks,
Harry W9BR
Harry
Begin forwarded message:
From: harry.h...@rauland.com
Harry,
Other that zooming in on your iPad, there is no way to make the buttons
larger.
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems™
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web:
Rob,
Interesting your approach to drive balanced audio input. Can you please give
more details to get better ssb punch.
I note average power on my 3k and also my 6500 could use some improvement
especially if we can maintain that cleAn Flex sound in doing so.
73, Carl/K5HK.
Carl Young,
VOX or VAC don't work anymore?
Did I miss something?
Mike va3mw
On Mon, Feb 17, 2014 at 5:51 PM, Tim Ellison, W4TME t...@flex-radio.comwrote:
Harry,
Other that zooming in on your iPad, there is no way to make the buttons
larger.
Tim Ellison, W4TME
Customer Experience Manager
trying to find skins folder to add skins.
In windows 8.1, I'm looking at the path:
This PC / bootcamp (C:) / users / John / AppData / Roaming / FlexRadio Systems
/ PowerSDR v2.7.2
The only folder I see is Backup
I checked Hidden items, and show all folders.
Am I missing something?
Rob:
I too would be interested in more detail. What sort of mic amp and limiter
do you and where did you get them. Are they commercial or home brew?
73,
Bill Tynan, W3XO
--
From: Carl k5h...@gmail.com
Sent: Monday, February 17, 2014 4:58 PM
13 matches
Mail list logo