Looking for a clean 1500 ,with power and usb cable's and bnc. manual and box a
plus. Please get back off line.
73
dale wt4t
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
The FLEX-1500 is currently on sale for Black Friday
http://cart.flexradio.com/FLEX-1500_p_10.html
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems™
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web:
Just purchased a very nice 5K. Learning curve steep. Trying to operate in
dual diversity receive configuration where ANT1=NVIS dipole while ANT2=
elevated dipole. I am unable to make this seclection. Reading and trying
to understand the published reference material, quick question if I
I have recently began to experience sudden crashes of PSDR. It began
happening with the install of ver 2.7.2. I was using an older XP machine
and it was suggested that the OS wasn't robust enough. I have subsequently
got a new computer running Windows 7. I has an I7 processor and 16 GB of
ram.
Hi Jim, I sent you a reply but once again my e-mail continues to
bounce. Will try using a different account. 73
Gedas, W8BYA
Gallery at http://w8bya.com
Light travels faster than sound
This is why some people appear bright until you hear them speak.
On 11/28/2014 2:17 PM, Jim Broaddus
Tried RX1 to ANT2. RX2 to ANT1. No joy on RX2 to ANT1. RX2 does not see
anything but RX1 Tap. In other words, RX2 is apparently sharing the
antenna connected to RX1. I see no explanation as to what RX1 Tap is, but
it could be an interconnect feature allowing both receivers to share the
I have a similar problem, but usually it only happens if I leave the Flex
3000 computer on overnight. I have learned to reboot the computer in the
morning before powering up the radio. This seems to have fixed the problem
... the last time this happened was yesterday. I also have a robust computer
*Reading from Flex documentation from paragraphs which speak to diversity:
This capability exist in the FLEX-5000 only if the HRFIO-34 (or greater)
RF switching matrix board is installed in your radio. This 5K is SN
0811-3147. Preowned, so the Born on Date is unavailable except from Flex
Jim,
Rx2 can only access Ant1, RX2 in, or RX1 Tap, connect your secondary or
reference antenna to Ant1 or preferably RX2in, BNC CONNECTOR. Then start the
diversity RX. You will only hear and see RX1.
Dudley
Sent from my iPad
On Nov 28, 2014, at 2:33 PM, Jim Broaddus
Jim -
You just received an answer from Dudley (Mr. Flex Service to many of us).
Connect your second antenna to the BNC RX2 connector and you are set to go.
I have a early 5K (blue light) and it works well. There were very few of
the early antenna matrix boards, and most were upgraded long ago.
Mike,
An unhandled exception error, is a loss of communications between the radio and
PowerSDR , failure in the FireWire subsystem. Usually HW, FW card, or cable.
Most likely the cable, some FW cables are not up to running at the full
400mbit streaming that the latest driver is sending,
My radio seems to pass all tests but fail the gen/bal test. It comes back with
-28.4 instead of -26.8. From what i can tell the radio seems to fuction OK.
How will this affect the radio if this test is failing. I have performed these
tests with a new database with the recommended settings
Thanks guys for your help. Progress but no cigar. Hwd Config confirms
RFIO-0006 (34C) there as required. Still RX2 does not see anything but RX1
Tap. Pan adaptor supports that no sigs are received on RX2. Time for a
ticket, maybe?
*Jim Broaddus*, *Director*
Bear Creek Feline Center
13 matches
Mail list logo
