This just popped up.
Page 1 C 2012 FlexRadio Systems
PowerSDRT v2.4.4 Release Notes
September 5, 2012
Looks like if fell through a time warp. :)
Alan
WA4SCA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Tom,
The JT65-HF implementation is a good one for HF.
Alan
WA4SCA
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of TM
Sent: Wednesday, August 22, 2012 4:39 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] JT65
It works on my VISTA-32 bit machine as well. I think I recall reading that
it does not work with VISTA-64 bit, but that may well be in error.
73s,
Alan
WA4SCA
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tony Estep
HRD, MixW, WSPR, JT-65, etc all work fine. It just takes VAC and some
virtual ports to glue them together.
73s,
Alan
WA4SCA
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of kc9...@aol.com
Sent: Wednesday, May 16, 2012
Neal,
Based on some rumors from a consistently unreliable source, here are my
guesses:
It will have a touch screen which can be skinned to emulate any rig ever
made. The default will be the KWM-2A, with the SB-101 next choice. (A K3
skin has been developed, but is tied up in court.)
By
Paul,
I use separate antennas, but have found that setting the AGC-T properly is
essential. If set too high, it will amplify the noise, and it wipes out the
downlink. By backing off, per the instructions in the manual, RX works very
well.
If I found the correct antenna on the Gulf Alpha site,
Hi,
A non-ham friend has been having issues with his computer's Firewire,
similar to those which can happen to the Flex. He does video and audio
editing for some of the churches and schools here. Applying the techniques
and software discussed here, we have found, after updating the drivers,
-Original Message-
From: br...@lloyd.com [mailto:br...@lloyd.com] On Behalf Of Brian Lloyd
Sent: Friday, April 13, 2012 9:59 AM
To: apbid...@mailaps.org
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Low DPC PCIe NIC?
On Fri, Apr 13, 2012 at 7:35 AM, Alan P. Biddle apbid...@united.net
Nick,
In the FM mode, the tail of the packet gets truncated. Go into the MixW
Mode Settings menu, Parameters, and set the TX Tail to 200 ms. That should
get you going. Once you are, you can experiment with smaller values.
Depending on sample rate and buffer sizes, you may be able to cut that
Tim,
Shortly after 2.3.5 came out, there were list discussions about taking
advantage of the higher VAC sampling rates, and changing the default cable
SR to 192 kHz from the 48 kHz in the KB article. There are 16 and 24 bit
Studio Quality selections. Is there an official Flex do/don't on going
A question about RX-only and transverters.
I have my VU-5K set up with an S-band converter, 10 meter IF, which I only
use for RX. In setting it up, I ticked the XVTR Setup RX Only box though it
is connected to the XVRX connector and effectively does nothing.
While trying to figure out how the
Paul,
No. It does not supply 12 volts DC up the line. I have always powered my
preamps, except for the RX-only S-band, with separate cables, so the
transition was easy.
73,
Alan
WA4SCA
-Original Message-
From: flexradio-boun...@flex-radio.biz
One culprit is Carbonite. Whenever it decides to do an update, it trashes
the TX and RX audio as described. I always pause it before Flexing.
Alan
WA4SCA
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Guy Harris
Sent:
Hi,
I am trying to get my VU-5K working on 1200 baud packet for satellite data
transmission. The local APRS traffic makes a good signal source. The Flex
equipment is:
VU-5K
PowerSDR V 2.2.3
WIN7 Pro 32 bit
VAC 4.09
Packet software
MixW 2.20
MixW works fine in the Flex with all the usual SSB
://www.flexradio.com
logo
On 12/9/2011 12:21 PM, Alan P. Biddle wrote:
Hi,
I am trying to get my VU-5K working on 1200 baud packet for satellite data
transmission. The local APRS traffic makes a good signal source. The
Flex
equipment is:
VU-5K
PowerSDR V 2.2.3
WIN7 Pro 32 bit
VAC 4.09
Packet software
.
Alan
WA4SCA
-Original Message-
From: Tim Ellison, W4TME [mailto:t...@flex-radio.com]
Sent: Friday, December 09, 2011 3:22 PM
To: apbid...@mailaps.org
Cc: Alan P. Biddle; t...@flexradio.com; flexradio@flex-radio.biz
Subject: Re: [Flexradio] 2 meter packet with VU-5K problem
Make sure you
Tim,
Found the problem, and as expected, operator error. It turns out that if
you have Noise Reduction on, it does a great job of removing the packet
noise. I have a bad ambient noise situation, and have just gotten used to
leaving it on. It has always been a nearly magical solution rather
The VU-5K is proving to be an amazing satellite rig. There are several
TS-2000 CAT commands, needed for programs such as SATPC32, which are not
fully implemented. For best processing, should I submit a single request
giving all the commands and issues which are somewhat interrelated, or a
A question about setting TX deviation using digital modes. In the FM mode,
you can manually enable VAC, but the usual gain sliders are absent. Does
one use the ones on the VAC setup tab, or is there another way to set the
deviation? At one time there was a slider tab, perhaps on the transmit
Mike,
Take a look at this mode-J filter:
http://www.amsat.org/amsat-new/articles/Mode-J/
However, you will almost certainly need a low noise preamp on 70 cm. A few,
N8MH and myself included, have does this experiment. The preamp should
provide enough selection to protect the FCD, but you may
I will add a similar recommendation for Acronis, but with a warning about
the current 2011 version. It is extremely buggy, and the user interface was
improved to the point that even simple tasks are hard to do. From
personal experience, even their tech support people are confused.
I am a
John,
WSPR either transmits or listens on one band, frequency hops to another
band, etc, which allows you to contribute to propagation data on multiple
bands.
Alan
WA4SCA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
on any
location other than the C drive/
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394
On Tue, Dec 21, 2010 at 10:18 PM, Alan P. Biddle apbid...@united.net
wrote:
Justin,
I am very new at this, but my understanding is that the latest
] On Behalf Of Alan P. Biddle
Sent: Tuesday, December 21, 2010 10:18 PM
To: 'Justin M. Mayrand'
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Problem installing XP Firewire patch
Justin,
I am very new at this, but my understanding is that the latest SDR installs
checks whether it is needed
Here is what I did. In researching the issue, I checked the earlier hot fix
for SP2 on the same issue:
http://support.microsoft.com/kb/885222
It requires you to go into the registry and add in the SidSpeed parameter.
Since it was missing from both my cards, after the usual registry backup, I
I received a call that my VU5K was on the way, so I decided to experiment
installing the software. During the process, I got a message suggesting
that I install the MS Firewire patch. I am running XP Pro, SP3, so that was
not unexpected. I was able to download the patch and unzip it. However,
is there.
On Dec 21, 2010, at 5:44 PM, Alan P. Biddle wrote:
I received a call that my VU5K was on the way, so I decided to experiment
installing the software. During the process, I got a message suggesting
that I install the MS Firewire patch. I am running XP Pro
gave up and tried without it, there have
been no issues.
On Dec 21, 2010, at 8:41 PM, Alan P. Biddle wrote:
Justin,
I was able to download the patch and unzip it.
Thanks, but the problem occurs AFTER it is unzipped, using the included
password
NV8A,
I ordered one at the AMSAT Symposium. The fact that I also won the discount
certificate kindly provided by Flex was just gravy!
(the other) Alan
WA4SCA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
I noticed the remark that PowerSDR 2.1 would have satellite locked tuning
supported? Is that AFC tuning to track the downlink, such as Icom satellite
rigs and the old DSP-2232 provided?
Alan
WA4SCA
___
FlexRadio Systems Mailing List
Gerald,
Great news about the transverters. Any info on the frequency coverage range
for 70 cm?
Alan
WA4SCA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Hi,
I have been contemplating using a FLEX-5000 as a satellite rig. (Thanks,
Bob!) One obvious question is the support of transverters. Above 2 meters,
using an IF of 28-30 MHz requires a lot of crystal switching to get both
satellite and terrestrial coverage, which may not be available in the
32 matches
Mail list logo