I have noticed that with the RX preamps set to OFF, the Signal meter reads a
steady S3 with the antenna disconnected.
With Pre1, Pre2 or Att selected, the meter reads 0
Is this normal? or have I set something incorrctly or misunderstood something?
Roger G0IUW
Mine has the same type of behavior, I can't remember the specifics, but the
Smeter never shows 0, even a dummy load.
73
N4BFD
http://www.qrz.com/db/N4BFD
On Fri, Dec 11, 2009 at 6:48 AM, roger g6...@tiscali.co.uk wrote:
I have noticed that with the RX preamps set
On Fri, Dec 11, 2009 at 3:48 AM, roger g6...@tiscali.co.uk wrote:
I have noticed that with the RX preamps set to OFF, the Signal meter reads a
steady S3 with the antenna disconnected.
With Pre1, Pre2 or Att selected, the meter reads 0
Is this normal? or have I set something incorrctly or
It also depends on the RX bandwidth.. Shrink the bandwidth to 10 hz and
the S-meter will read less. Exactly what it should.
73,
Dudley
WA5QPZ
Brian Lloyd wrote:
On Fri, Dec 11, 2009 at 3:48 AM, roger g6...@tiscali.co.uk wrote:
I have noticed that with the RX preamps set to OFF, the
Brian Lloyd wrote:
On Fri, Dec 11, 2009 at 3:48 AM, roger g6...@tiscali.co.uk wrote:
I have noticed that with the RX preamps set to OFF, the Signal meter reads a
steady S3 with the antenna disconnected.
With Pre1, Pre2 or Att selected, the meter reads 0
Is this normal? or have I set
-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Alfred Green
Sent: Friday, December 11, 2009 3:30 PM
To: Brian Lloyd
Cc: flexradio@flex-radio.biz; roger
Subject: Re: [Flexradio] Flex 3000 Signal meter
Brian Lloyd wrote:
On Fri, Dec 11, 2009 at 3:48 AM, roger g6
Tim Ellison wrote:
You are not using the most current version of PowerSDR. There are in fact two preamp settings (pre1 pre2) along with a preamp ECO change provided by FlexRadio Systems to support the software change for radios manufactured before Sept 2009.
Hey Tim,
You are correct,
7 matches
Mail list logo
