Sorry, my point wasn't so much about the specific SDR-1k output, but that I
had wanted to verify that the chain driving it was working properly. I had
expected the PowerSDR Sound Card Output Voltage Test to put out a full-scale
wave for calibration, but it doesn't appear to generate any audio at
Bruce, I think that, with the sensor on the 100 Watt
power amplifier the power is measured. Without the
PA sensor, it is a relative power.
Mike - AA8K
Bruce Walker wrote:
I have an SDR-1000 from which I recently removed the 100WPA, so it's now a
barefoot 1W version. I am currently using an
Bruce Walker wrote:
I have an SDR-1000 from which I recently removed the 100WPA, so it's now a
barefoot 1W version. I am currently using an FA-66 with it. I've noticed
that since I've removed the 100WPA, the displayed power is about 3dB higher
than what I read on my QRP power meter (WM-1);
I have an SDR-1000 from which I recently removed the 100WPA, so it's now a
barefoot 1W version. I am currently using an FA-66 with it. I've noticed
that since I've removed the 100WPA, the displayed power is about 3dB higher
than what I read on my QRP power meter (WM-1); when PowerSDR says 1W
4 matches
Mail list logo
