Does anyone on the list ever receive strange error messages from FrameMaker?
I was in the middle of importing PDF files to layout in a structured
FrameMaker document into FrameMaker 10.0.2.419 [or more accurately,
10.0.3.419] and I happened to receive the attached error message Debug
At 08:00 +1200 14/5/13, Alan T Litchfield wrote:
The retail reseller channel does not exist anymore. It was that channel I
referred to when I said that they are too expensive to maintain and why Adobe
has gone direct to the market.
Ah, right - I understand. No, I don't remember anything
Dear Framers:
I wonder if anyone out there has experienced this.
I upgraded windows 7 32 bit to 64 bit.
To do this I had to do a clean reinstall on the C: drive which meant
reinstalling every single bit of software including TC4. No drives were
reassigned or re-named.
Everything went well -- and
You may be able to change the letters assigned to your drives. See
http://pcsupport.about.com/od/windows7/ht/change-drive-letters-windows-7.htm
On 2013-05-14 14:38, Rob Shell wrote:
Dear Framers:
I wonder if anyone out there has experienced this.
I upgraded windows 7 32 bit to 64 bit.
To do
Is this the cause of my nightmare?
When you import by reference with File Import File, the path to the text
or graphic can be either absolute or relative. A relative path begins at a
current folder or one folder up the hierarchy and specifies the file's
location from there. An absolute path
I don't think this will work because Rob already has an H: drive, which is
where his FM files are. You can't assign two drives (or two partitions) to the
same letter.
I think his only option is moving the directories to the drive letter that
FrameMaker is expecting to use. But I'm not sure
I recall that when I've had Frame files (that had been moved) looking for
graphics in a certain directory and couldn't find them, if I pointed the
first one to the correct directory, it found the rest in that same
directory.
Now, caveats being that in my case, the frame files and the graphics
On 2013-05-14 15:36, Fred Ridder wrote:
I don't think this will work because Rob already has an H: drive,
which is where his FM files are. You can't assign two drives (or two
partitions) to the same letter.
I thought he might be able to rename the current H drive to something
else, and
I think my response is far from the mission of this forum but the statement
below just hooked me, it is also a nice diversion from the daily work to
read all the responses, and I bet our thoughts trickle back into Adobe.
A previous post said:
The problem with customers is that they cost money to
Craig,
How do you download the help as a PDF?
-Gillian
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Craig Ede
Sent: Thursday, May 09, 2013 10:25 AM
To: framers@lists.frameusers.com
Subject: FW: FM10 help broken?
Isn't that what MadCap tried to do?
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Syed Zaeem Hosain
(syed.hos...@aeris.net)
Sent: Saturday, May 11, 2013 3:06 PM
To: Writer; craig...@hotmail.com;
I don't think MS's new can't-call-it-Metro UI has gotten any traction
in corporate environments. If they don't want Windows 8 to be a bigger
flop than Vista, compatibility is essential.
On Mon, May 13, 2013 at 10:23 AM, Lea Rush l...@astoria-pacific.com wrote:
I'm one who's stayed with FM8 and
Dear Rick,
please allow one note about the print engine.
FrameMaker is still using the old Distiller engine (at least version
10 does).
I recently had to switch a workflow from Indesign to
FrameMaker and found it annoying that Indesign would produce a valid PDF
right away whereas with
I was contacted by the reseller that my company uses earlier today and it turns
out that only it will be either all or nothing, no picking-and-choosing.
We here use FM, Acrobat Professional and may be getting into InDesign in the
future, but we have no need -- and do not see a need in the
Lea,
I'm using an even older version of Frame; Frame 6.0p405 and have
upgraded to Window 8 ( albeit without a touch screen monitor). Frame 6.0
works fine and I have not seen any interface or other problems. O do,
however, use the compatibility feature of Windows to launch Frame under
Windows
On Mon, May 13, 2013 at 2:08 AM, Harro de Jong
harro.dej...@triviewgroup.com wrote:
The FM9 license states that ' you acknowledge that any obligation Adobe may
have to support the previous version(s) may end upon the availability of the
upgrade or update.' IANAL, but to me that implies they
On Sat, May 11, 2013 at 5:08 PM, Steve Johnson chinask...@gmail.com wrote:
... you can't buy old versions of anything from anybody ever ...
Maybe licensed resellers have to return all old software when a new
version is released, but the FrameMaker 10 license allows you to sell
your rights:
You
Customers value a business based on the goods or services it provides,
not on how much money it makes for its stockholders. Adobe hasn't come
up with anything new I thought was worth paying for since 2002.
On Mon, May 13, 2013 at 1:19 PM, dave.st...@gdc4s.com wrote:
The purpose of business is
Do any Boston-area Framers have experience with GlobalVision International
for translation projects?
We are translating 220pp unstructured FM11 into Japanese.
I am also interested in the view from the trenches on translations from FM
via machine translation vs human-guided translation memory.
Windows XP SP3?
On Mon, May 13, 2013 at 1:46 PM, Kristy Nolan kristy.no...@wnco.com wrote:
Is anyone else running Frame 11 on a MacBook Pro? If so, how did you get it
to install? I am having trouble. I used to run Frame 7 on my old MacBook, so
know it has worked in the past. I was able to
Hi Kristy,
I have been stuck with a MacBook Pro since starting a new job in November.
Until last week, I ran FM11 pretty much without incident within a
VirtualBox Win7 VM.
But the VM was confined to a single screen, and I hated jumping through the
looking-glass from Mac to Windows and back for
You cannot run Frame 11 directly on a Mac. You CAN download VMWare Fusion,
create a Windows VM on the MAC and install Frame 11 on the Windows VM. That's
how my MAC is set up. VMWare Fusion works like a champ!
-Gillian
From: framers-boun...@lists.frameusers.com
Sounds like the file got corrupt during download or maybe did not fully
download. Have you tried re-downloading it yet?
On May 13, 2013, at 4:46 PM, Kristy Nolan kristy.no...@wnco.com wrote:
image001.jpg
Hi, all-
Is anyone else running Frame 11 on a MacBook Pro? If so, how did you get it
Good call Jeff I had just assumed she downloaded it though the virtual machine
but I can def see where this could create a potential issue!
On May 13, 2013, at 5:10 PM, Jeff Coatsworth
jeff.coatswo...@jonassoftware.com wrote:
image002.jpg
What browser are you using to download it? You
Look in the Programs control panel, you surely have one or more
Microsoft Visual C++ 20## Redistributable runtimes installed.
On Tue, May 14, 2013 at 9:03 AM, Simon BUCH simon.b...@m-ais.com wrote:
I don't even have Visual C++ installed on my machine!
That part suggests to me that FrameMaker.exe was compiled with some
debug options on, which seems odd for a GA release.
On Tue, May 14, 2013 at 9:03 AM, Simon BUCH simon.b...@m-ais.com wrote:
F:\dd\vctools\vc7libs\ship\atlmfc\src\atl\atls\atldebugapi.cpp
Wed May 15
10AM Pacific Time
Register at: http://adobe.ly/11D6CTS
(Will be recorded: link sent to registered attendees, even if you miss it)
TWEET:
15May 10AM PDT Ellis Pratt WEBINAR Towards an Agile authoring methodology:
learning from Lean methodology http://adobe.ly/11D6CTS #AdobeTCS
Hi Simon,
Are you ware about any plug in being used in your FrameMaker or deployed by
someone else?
Does any file or this location exists on your disk?
Would it reproduce if you try the same steps again, considering both cases,
if you import it to same structured document or a new one?
Answers
Yes, you should only have to do the remapping once per chapter even if the
graphics files are on a different drive ... if all the graphics are in a single
folder. If they aren't, you have to do it once per chapter per folder. If
you've got lots of graphics folders, that's a right pain. If
ditto!
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335 |m...@mattrsullivan.com@mattrsullivanLinkedInfacebookmattrsullivan.com
On May 13, 2013, at 1:58 PM, Gillian Flato gillian.fl...@nexenta.com wrote:You cannot run Frame 11 directly
Hi, guys!
Thanks for the input! Update is that I have downloaded and installed Service Pack 3 for my Windows XP, deleted all previous attempts at downloading Frame, and re-downloaded the trial using Firefox. I made sure i was strictly on a Windows side (no coherence).
Result is still
Hi Tino,
I get what you are saying. Maybe instead of print engine I should use the
term layout engine. In my opinion, the whole EDD concept for formatting XML
in FrameMaker is very powerful and accessible. I don't think there is anything
quite as good in the XML world, especially if you
Thanks. Those are the corporate resellers I was referring to previously.
The retail reseller channel does not exist anymore. It was that channel
I referred to when I said that they are too expensive to maintain and
why Adobe has gone direct to the market.
The added value is worked out in terms
I run FM10 on a MBP with VirtualBox and Windows 7 installed on Bootcamp.
I boot into Windows using VB. Runs fine.
Of course, I think 10 has different registration procedures to 11.
Alan
On 14/05/13 8:46 AM, Kristy Nolan wrote:
> Hi, all-
>
> Is anyone else running Frame 11 on a MacBook Pro? If
s scrubbed...
Name: Visual C++ Debug Library error.png
Type: image/png
Size: 7725 bytes
Desc: not available
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20130514/86f5ee90/attachment.png>
At 08:00 +1200 14/5/13, Alan T Litchfield wrote:
> The retail reseller channel does not exist anymore. It was that channel I
> referred to when I said that they are too expensive to maintain and why Adobe
> has gone direct to the market.
Ah, right - I understand. No, I don't remember anything
Dear Framers:
I wonder if anyone out there has experienced this.
I upgraded windows 7 32 bit to 64 bit.
To do this I had to do a clean reinstall on the C: drive which meant
reinstalling every single bit of software including TC4. No drives were
reassigned or re-named.
Everything went well -- and
You may be able to change the letters assigned to your drives. See
http://pcsupport.about.com/od/windows7/ht/change-drive-letters-windows-7.htm
On 2013-05-14 14:38, Rob Shell wrote:
> Dear Framers:
> I wonder if anyone out there has experienced this.
> I upgraded windows 7 32 bit to 64 bit.
>
Is this the cause of my nightmare?
When you import by reference with File > Import > File, the path to the text
or graphic can be either absolute or relative. A relative path begins at a
current folder or one folder up the hierarchy and specifies the file's
location from there. An absolute path
gt;
>
> You are currently subscribed to framers as DocuDoc at hotmail.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit
> http://lists.frameusers.com/mailman/options/framers/docudoc%40hotmail.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20130514/8503827a/attachment.html>
ces and info.
>
> ___
>
>
> You are currently subscribed to framers as rentagoodbook at gmail.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit
> http://lists.frameusers.com/mailman/options/framers/rentagoodbook%40gmail.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>
>
--
*Save the earth.* It's the only planet with chocolate.
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20130514/ec82da5d/attachment.html>
ething
else, and then rename the G drive to H. But mabye something on the
system cares whether the Frame files are on H -- I'm not sure.
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20130514/c0f8c9bb/attachment.html>
Look in the Programs control panel, you surely have one or more
Microsoft Visual C++ 20## Redistributable runtimes installed.
On Tue, May 14, 2013 at 9:03 AM, Simon BUCH wrote:
> I don't even have Visual C++ installed on my machine!
That part suggests to me that FrameMaker.exe was compiled with some
debug options on, which seems odd for a GA release.
On Tue, May 14, 2013 at 9:03 AM, Simon BUCH wrote:
> F:\dd\vctools\vc7libs\ship\atlmfc\src\atl\atls\atldebugapi.cpp
ment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20130514/3b9a9c5d/attachment.html>
bed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20130514/d3e7907e/attachment.html>
-- next part --
A non-text attachment was scrubbed...
Name: twitter.png
Type: image/png
Size: 1331 bytes
Desc: not available
URL:
<http://lists.frameusers.com/pi
not get too far.
Rick Quatro
Carmen Publishing Inc.
585-283-5045
rick at frameexpert.com
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20130514/b78eb00f/attachment.html>
_
>>
>>
>> You are currently subscribed to framers as kristy.nolan at wnco.com.
>>
>> Send list messages to framers at lists.frameusers.com.
>>
>> To unsubscribe send a blank email to
>> framers-unsubscribe at lists.frameusers.com
>> or visit
>> http://lists.frameusers.com/mailman/options/framers/kristy.nolan%40wnco.com
>>
>> Send administrative questions to listadmin at frameusers.com. Visit
>> http://www.frameusers.com/ for more resources and info.
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20130514/e73f9ad8/attachment.html>
http://help.adobe.com/en_US/FrameMaker/10.0/Using/framemaker_10_help.pdf
On Mon, May 13, 2013 at 10:07 AM, Gillian Flato
wrote:
> How do you download the help as a PDF?
MadCap's original impetus was to create a successor to RoboHelp, which
at the time looked like it had been abandoned by its then-owner
Macromedia.
On Mon, May 13, 2013 at 10:17 AM, Gillian Flato
wrote:
> Isn't that what MadCap tried to do?
>
> -Original Message-
> From: framers-bounces
50 matches
Mail list logo