Have you found a solution to this? I am having the same problems on a
machine very recently updated (cvsupped + buildworld on 4/14/2005):
kernel.log:Feb 25 13:46:40 trinity kernel: rl0: discard oversize frame
(ether type 3db4 flags 3 len 8381 max 1514)
kernel.log:Apr 10 14:27:37 trinity
I'm being told by my ISP that I need an IGMP proxy to get my FreeBSD
firwall to handle multicast info from their network (actually BBC radio
content) - I can't find such a proxy for FreeBSD - is there one?
___
freebsd-questions@freebsd.org mailing list
On the machine i am running squid, it runs the program fine, but as soon as
anything goes to use the proxy server the program dies.
How can i run squid so that im able to see why its crashing/closing when
something goes to use it?
im running FreeBSD 5.4-Stable CVSUPED and updated
Well i recently installed my first natd server on
freebsd 5.3, but its not working ?
here is wat i did ..
1. compiles kernal with the following options
options IPFIREWALL
options IPV6FIREWALL
options IPDIVERT
2. made the following entries in rc.conf
defaultrouter=10.0.0.1
gateway_enable=YES
The ports support policy is right there on www.freebsd.org/ports for
all to read.
It's not reasonable, IMHO. If a release hasn't been EOLed, ports should
work on it.
May I recommend openbsd as a cure for what ails ye?
--
Joel Rees
___
dear list,
i just installed smartmonutils from ports on a 4.11-release box.
when i run
# /usr/local/sbin/smartctl -a ad0
I get the error message
smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen
[snip]
Smartctl open device: ad0 failed: Inappropriate ioctl for device
the same with the second
FreeBSD Daemon wrote on Tuesday 19 April 2005 10:34 in the group
list.freebsd.questions:
dear list,
i just installed smartmonutils from ports on a 4.11-release box.
when i run
# /usr/local/sbin/smartctl -a ad0
I get the error message
smartctl version 5.30 Copyright (C) 2002-4
On Tue, Apr 19, 2005 at 11:26:24AM +0200, Kees Plonsz wrote:
FreeBSD Daemon wrote on Tuesday 19 April 2005 10:34 in the group
list.freebsd.questions:
dear list,
i just installed smartmonutils from ports on a 4.11-release box.
when i run
# /usr/local/sbin/smartctl -a ad0
faisal gillani wrote on Tuesday 19 April 2005 10:08 in the group
list.freebsd.questions:
Well i recently installed my first natd server on
freebsd 5.3, but its not working ?
here is wat i did ..
1. compiles kernal with the following options
options IPFIREWALL
options IPV6FIREWALL
Danny Howard wrote:
I'm not entirely sure on this one ... you have RTFM?
Obviously. I started with the tutorial at
http://people.freebsd.org/~rse/mirror/, but I read the whole manual
before setting it up.
There's gmirror
configure -a ... but that is about synchronization.
Yes, and
dima wrote:
and moreover, it must be supported by ATAng which presented only in 5.x branch
Would it work with SCSI on 4.11?
bye Thanks
av.
___
freebsd-questions@freebsd.org mailing list
Saying it's not working is way to vague.
You need to post more details about what is not working.
Like can the 5.3 server ping the public internet?
Can it ping PCs on the LAN?
Can a win LAN PC ping the server?
What does the firewall log contain?
Have you tested with firewall out of the way by
Andrea Venturoli wrote on Tuesday 19 April 2005 14:39 in the group
list.freebsd.questions:
dima wrote:
and moreover, it must be supported by ATAng which presented only in 5.x
branch
Would it work with SCSI on 4.11?
I heard there are troubles with several scsi disk-drives,
even on
Andrea Venturoli wrote:
dima wrote:
and moreover, it must be supported by ATAng which presented only in
5.x branch
Would it work with SCSI on 4.11?
bye Thanks
av.
___
freebsd-questions@freebsd.org mailing list
Plug a USB mass-storage-type still camera, mount it, unplug it, and
try to forcibly unmount it using 'umount -f'. The whole system hangs
right away.
Is it a known bug ?
--
There are 10 types of people in the world:
Those who understand binary and those who don't
I have a dual processor server Will freebsd use them both is so When I install
it how do I get it to use it ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Hi, everyone.
There are some excellen bbs software, e.g vbb, phpbb,
FUDforum, but do I have another choice?
I just want to install a BBS software on my personal
web, build on php and mysql database, and it should be
a free software (GPL lisence?), and should support
mulity lanuage. What about
Hello all,
I have installed ports/cvsup-mirror at defaults settings and it
downloads over 3GB files on my hard drive (I guess it dowloads all
releases and all ports collections). Does anyone knows how to
reduce traffic if I need only fresh ports and RELENG_5_3 cvs tag
available for cvsup ???
I would just use phpbb...it's a snap to setup, and doesn't take much to manage.
--Brian
On 4/19/05, liu jiachang [EMAIL PROTECTED] wrote:
Hi, everyone.
There are some excellen bbs software, e.g vbb, phpbb,
FUDforum, but do I have another choice?
I just want to install a BBS software on
By default, no...I don't think it will use both processors. You have
to make a custom kernel and enable SMP. Look here
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-building.html
for how to do it. In 5.x, I believe all you need is options SMP,
but I could be wrong. If
How can I fix it, please ?
Info / log:
uname -a
FreeBSD dexter.lab 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Fri Nov 5
04:19:18 UTC 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386
cc --version
cc (GCC) 3.4.2 [FreeBSD] 20040728
sudo portinstall handbrake
--- Installing
On Sun, 17 Apr 2005 05:37:42 -0700, Loren M. Lang wrote:
On Wed, Apr 13, 2005 at 01:28:27PM -0400, Steven Friedrich wrote:
I got this error on one of two 4.11 boxes.
is linux.ko loaded? That's the module responsible for reconizing elf
type 3 if I'm not mistaken.
That was it.
I shot myself
Plug a USB mass-storage-type still camera, mount it, unplug it, and
try to forcibly unmount it using 'umount -f'. The whole system hangs
right away.
Is it a known bug ?
I can confirm this. FreeBSD-5.3-RELEASE-p9.
Mark
--
PGP: http://www.darklogik.org/pub/pgp/pgp.txt
B776 43DC 8A5D EAF9
Hi all. I'm having problems with my ports collection on a 4.10
server. I need to keep the versions of the ports the same on these
two boxes (for dev reasons), so I rsync'd /usr/ports...and on the
target machine, I get the following error when I try to build
something:
Makefile error: There is a
Hi,
Unfortunately vmware workstation 4.5.x (linux version) is not supported in
the ports tree. I was wondering if there are any alternatives to vmware,
commercial or freeware. I'm talking about a host version (I'm not talking
about guest OSes).
Or may be someone has a tutorial about how to
-Original Message-
From: [EMAIL PROTECTED] [mailto:owner-freebsd-
[EMAIL PROTECTED] On Behalf Of Didier Wiroth
Sent: 19 April 2005 14:35
To: freebsd-questions@freebsd.org
Subject: vmware alternative for freebsd?
the ports tree. I was wondering if there are any alternatives to
Hey,
Thank you for your answer!
I will have a look a qemu. But I don't think it is as professional as I need
it.
Actually I'm working witn xp and windows vmware. I use it for testing
unattended installation CDs, service packs etc..., new windows netware
client testing, software testing etc...
I have read about this some months ago on the list, but I can not find
it now. Can someone explain how to make a Geom mirror with one local
and one remote component ? (so basicly syncronize two volumes between
machines automagically)
Thanks
___
Trying to install cvsup via ports, I cd into /usr/ports/net/cvsup and it
wants to install ezm3, which is fine, but during the ezm3 install, this
happens:
Any ideas on how to fix it?
missing version stamps - compiling ../src/C/FreeBSD4/Csignal.i3
missing version stamps - compiling
Never mind, found results on google, I was trying to compile with -O2,
using just -O works. :-)
Mark
M. Parsons wrote:
Trying to install cvsup via ports, I cd into /usr/ports/net/cvsup and
it wants to install ezm3, which is fine, but during the ezm3 install,
this happens:
Any ideas on how to
Brian McCann [EMAIL PROTECTED] writes:
Hi all. I'm having problems with my ports collection on a 4.10
server. I need to keep the versions of the ports the same on these
two boxes (for dev reasons), so I rsync'd /usr/ports...and on the
target machine, I get the following error when I try to
Hello freebsd-questions,
I have a problem to scan all http proxy traffic for a viruses. Does
exist some open source antivirus plugin for squid? I have been
checked the ports collection and I can't find any solution.
With best regards, [MCP, MCSD]
Vyacheslav
Thanks!
On 19 Apr 2005 10:41:16 -0400, Lowell Gilbert
[EMAIL PROTECTED] wrote:
Brian McCann [EMAIL PROTECTED] writes:
Hi all. I'm having problems with my ports collection on a 4.10
server. I need to keep the versions of the ports the same on these
two boxes (for dev reasons), so I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 19 Apr 2005, Vyacheslav Druzhinin wrote:
Hello freebsd-questions,
I have a problem to scan all http proxy traffic for a viruses. Does
exist some open source antivirus plugin for squid? I have been
checked the ports collection and I can't
On Mon, Apr 18, 2005 at 09:09:36AM -0400, Lowell Gilbert wrote:
Florian Hengstberger [EMAIL PROTECTED] writes:
Hi!
I really worry about that it seems (man mountd, man rpcbind)
impossible to specifiy the interface these daemons bind to.
I've had exactly the same problem a while ago! The
--On Monday, April 18, 2005 08:05:37 PM -0700 Joshua Lewis
[EMAIL PROTECTED] wrote:
How do startup scripts work?
I added:
mysql_enable=²YES²
But I don¹t think it is working. I had rebooted my system the other day
and my mail server stopped working (postfix reading from mysql tables)
and I tried
--On Monday, April 18, 2005 10:22:13 PM -0600 Brett Glass
[EMAIL PROTECTED] wrote:
At 10:16 PM 4/18/2005, Kris Kennaway wrote:
The ports support policy is right there on www.freebsd.org/ports for
all to read.
It's not reasonable, IMHO. If a release hasn't been EOLed, ports should
work on it.
--On Tuesday, April 19, 2005 08:39:46 AM -0400 Brian McCann
[EMAIL PROTECTED] wrote:
I would just use phpbb...it's a snap to setup, and doesn't take much to
manage.
And has more security problems than Carter has liver pills
Paul Schmehl ([EMAIL PROTECTED])
Adjunct Information Security
On Tue, 19 Apr 2005 14:38:33 +0200, Andrea Venturoli
[EMAIL PROTECTED] wrote:
Danny Howard wrote:
I'm not entirely sure on this one ... you have RTFM?
Obviously. I started with the tutorial at
http://people.freebsd.org/~rse/mirror/, but I read the whole manual
before setting it up.
hi !
i have fbsd 5.3 router with gateway_enable=YES /etc/rc.conf
and 3 interfaces:
1. xl0 (mynet)
2. rl0
3. tun0 (internet) cuaa0
i need to get work router from mynet to rl0 net and internet . i want
to do that without natd but net.inet.ip.forwarding=1 work only on one
psihical interface :) i
I'm trying to install an unofficial port of MythTV Gallery. It looks
for exif.10 library but doesn't find it even after installing
libexif-0.6.12_1. Does the port makefile need to updated or do I need
to install something else to get exif.10?
Thanks,
Drew
--
Visit The Alchemist's Warehouse
Alex wrote:
hi !
i have fbsd 5.3 router with gateway_enable=YES /etc/rc.conf
and 3 interfaces:
1. xl0 (mynet)
2. rl0
3. tun0 (internet) cuaa0
i need to get work router from mynet to rl0 net and internet . i want
to do that without natd but net.inet.ip.forwarding=1 work only on one
psihical
Hi:
I've recompiled sysinstall b/c i want it to automatically get
install.cfg ( for an autoinstall ) from the cd its on instead of a
floppy. Now, I cant find out where sysinstall is on the 5.3 cd so I can
replace and reburn it. Can someone help me or let me know where
sysinstall is hidden on
Hi people
I do df -h on my machine and got this RARE ouput
%df -h
Filesystem SizeUsed Avail Capacity Mounted on
/dev/ad0s1a7.7G2.2G4.9G31%/
devfs 1.0K1.0K 0B 100%/dev
/dev/ad0s1d 65G9.5G 50G16%/usr/home
%df
Filesystem
On Tue, Apr 19, 2005 at 04:38:10PM +0400, Vyacheslav Druzhinin wrote:
Hello all,
I have installed ports/cvsup-mirror at defaults settings and it
downloads over 3GB files on my hard drive (I guess it dowloads all
releases and all ports collections). Does anyone knows how to
reduce traffic if
Hi people
I do df -h on my machine and got this RARE ouput
%df -h
Filesystem SizeUsed Avail Capacity Mounted on
/dev/ad0s1a7.7G2.2G4.9G31%/
devfs 1.0K1.0K 0B 100%/dev
/dev/ad0s1d 65G9.5G 50G16%/usr/home
%df
Filesystem
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Osmany Guirola
Cruz
Sent: Tuesday, April 19, 2005 5:37 AM
To: freebsd-questions@freebsd.org
Subject: df question
Hi people
I do df -h on my machine and got this RARE ouput
%df -h
Filesystem Size
On Tuesday, April 19, 2005, at 08:36AM, Osmany Guirola Cruz [EMAIL PROTECTED]
wrote:
50G+9.5G=60.5G but the partition size is 65G ... where are my ~5G,?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/disks.html#MANUFACTURER-DISK-SIZE
___
Paul Schmehl wrote:
--On Tuesday, April 19, 2005 08:39:46 AM -0400 Brian McCann
[EMAIL PROTECTED] wrote:
I would just use phpbb...it's a snap to setup, and doesn't take much to
manage.
And has more security problems than Carter has liver pills
Hmm, what would a FreeBSDer advise as a
forum
Lowell Gilbert wrote:
On the (syscons(4)) console, you can enable screen blanking as a
screensaver in its own right. You would load either the green or
apm screen saver (available as kernel modules) and enable it with
vidcontrol(1). I don't think you can trigger it by hand.
I tried both (before
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Osmany Guirola
Cruz
Sent: Tuesday, April 19, 2005 5:37 AM
To: freebsd-questions@freebsd.org
Subject: df question
Hi people
I do df -h on my machine and got this RARE ouput
%df -h
Filesystem
Ivan Voras wrote:
Lowell Gilbert wrote:
On the (syscons(4)) console, you can enable screen blanking as a
screensaver in its own right. You would load either the green or
apm screen saver (available as kernel modules) and enable it with
vidcontrol(1). I don't think you can trigger it by hand.
I
Ash wrote:
Alex wrote:
hi !
i have fbsd 5.3 router with gateway_enable=YES /etc/rc.conf
and 3 interfaces:
1. xl0 (mynet)
2. rl0
3. tun0 (internet) cuaa0
i need to get work router from mynet to rl0 net and internet .
i want to do that without natd but net.inet.ip.forwarding=1 work
only on one
Is there anyone using this device with FreeBSD 4.x or 5.x? I'm new to the
world of auto-loaders and am curious if FreeBSD's tar / dump utilities can
support it properly for backing up of 3tb of data from various partitions.
If so, are there any specifics that I should be aware of when using this
Hi Michael!
Is there anyone using this device with FreeBSD 4.x or 5.x? I'm new to the
world of auto-loaders and am curious if FreeBSD's tar / dump utilities can
support it properly for backing up of 3tb of data from various partitions.
If so, are there any specifics that I should be aware of
On Tue, Apr 19, 2005 at 10:41:16AM -0400, Lowell Gilbert wrote:
Brian McCann [EMAIL PROTECTED] writes:
Hi all. I'm having problems with my ports collection on a 4.10
server. I need to keep the versions of the ports the same on these
two boxes (for dev reasons), so I rsync'd
Andrea, I have no idea, sorry, but I do notice that your gmirror list
looks somewhat different from mine, so I'll include that output, in case
we might learn something. I wish you all the best in cracking this nut
... :/
On Tue, Apr 19, 2005 at 02:38:33PM +0200, Andrea Venturoli wrote:
Geom
Feczak Szabolcs wrote:
I have read about this some months ago on the list, but I can not find
it now. Can someone explain how to make a Geom mirror with one local
and one remote component ? (so basicly syncronize two volumes between
machines automagically)
Feczak,
I saw that too ... my searching
Hey,
I downloaded opera 8.00, extracted the .tar.gz and ran the install.sh
script, all the files were copied to the right places. When I tried to
run opera I first had to symlink 2 libs ( libm.so.2 and libc_r.so.4 )
that wasn't much of a problem but when I try to run it now I get this
error:
On Tue, 19 Apr 2005 17:35:56 +0200,
[EMAIL PROTECTED] said:
On Mon, Apr 18, 2005 at 09:09:36AM -0400, Lowell Gilbert wrote:
Florian Hengstberger [EMAIL PROTECTED] writes:
Hi!
I really worry about that it seems (man mountd, man rpcbind)
impossible to specifiy the interface these
I'm having cvsup update issues right now. When I try to update I get:
Cannot connect to cvsupxx.us.freebsd.org: Connection refused
Will retry at xx:xx:xx
No matter which server I try.
Also when I try to run fastest_cvsup -c us I get timeouts on
everyserver. Any ideas?
Cody
On Tue, Apr 19, 2005 at 02:03:46PM -0500, Cody Holland wrote:
I'm having cvsup update issues right now. When I try to update I get:
Cannot connect to cvsupxx.us.freebsd.org: Connection refused
Will retry at xx:xx:xx
No matter which server I try.
Also when I try to run fastest_cvsup -c us I
So, after getting some pointers from folks (thanks!) I started from
scratch this morning twiddling one BIOS setting at a time.
Turns out that it's *NOT* the USB controller. Well, maybe it is, I don't
really know I guess. By turning off Power Management in the BIOS, I can
access all three
Hi,
I would like to migrate my main workstation from windowsxp to freebsd
5.4-stable (I run a few free- and openbsd machines on a few servers and a
laptop)
I use a matrox parhelia 128mb (dual DVI) agp card which is connected to 2 LCD
screens.
I also run a Hauppauge PVR350 TV card to watch TV
Hi,
I'm planning to buy a new graphic adapter, which should fulfill a few
conditions.
a) dual-dvi output
b) no fan (well yes, it needs to be silent)
c) fast 3d acceleration NOT required
d) tv-out not required
e) cheap ;-))
f) tending to a NVIDIA adapter because of their freebsd support
Is
Kevin Kinsey wrote:
Option DPMS
Ok, this works! Also, with command xset dpms force off I can turn it
off at will.
Now only to find something for the (text) console...
___
freebsd-questions@freebsd.org mailing list
On 4/18/2005 4:31 PM Drew Tomlinson wrote:
I'm trying to get my Audigy sound card working. I've followed the
instructions in the Handbook and used 'kldload snd_emu10k1'. My card
is detected but something isn't right:
pcm0: Creative Audigy (EMU10K2) irq 9 at device 9.0 on pci0
pcm0: 0x20 bytes
Hello,
Is there an upper limit to the size of a FAT32 file system in the
FreeBSD msdosfs code?
I put in an 80GB drive recently and there have been problems. There is
no problem with small FAT32 file systems on floppies or flash memory
cards. Any useful comments before I go back to the (working)
Hey!
I'm on a FreeBSD 4.11-RELEASE jail.
I've setup ftpd on port 21 from /etc/inetd.conf.
Its portrange according to the firewall is in the clear.
People can connect, but they cannot FXP using FlashFXP in Windows.
Does anyone know why they can't? I'm all out of ideas.
Thank you,
Fafa
--
Hi all,
Been playing around with FreeBSD for a couple of months. Just configured my
.muttrc, and I'm able to send messages but not to receive. I read the man pages
and followed the instructions but still it's not working. Am I missing
something here?
Any help will be greatly appreciated.
On Tue, 19 Apr 2005 16:07:29 +0200, Feczak Szabolcs [EMAIL PROTECTED]
wrote:
I have read about this some months ago on the list, but I can not find
it now. Can someone explain how to make a Geom mirror with one local
and one remote component ? (so basicly syncronize two volumes between
Brian M. Kincaid wrote:
Hello,
Is there an upper limit to the size of a FAT32 file system in the
FreeBSD msdosfs code?
I put in an 80GB drive recently and there have been problems. There is
no problem with small FAT32 file systems on floppies or flash memory
cards. Any useful comments before I
Hi,
On Tue, 2005-04-19 at 19:01 +0400, Vyacheslav Druzhinin wrote:
Hello freebsd-questions,
I have a problem to scan all http proxy traffic for a viruses. Does
exist some open source antivirus plugin for squid? I have been
checked the ports collection and I can't find any solution.
And I would like to add these questions to
On Tue, 2005-04-19 at 07:44 -0400, [EMAIL PROTECTED] wrote:
Saying it's not working is way to vague.
You need to post more details about what is not working.
Like can the 5.3 server ping the public internet?
Can it ping PCs on the LAN?
Can a win LAN
Yeah, I already had MSDOSFS_LARGE turned on, and I realize that it's
supposed to be an issue if you have bigger than 128GB drives.
I'm running 6.0-CURRENT.
I'll keep looking...
Brian
Kevin Kinsey wrote:
Brian M. Kincaid wrote:
Hello,
Is there an upper limit to the size of a FAT32 file system in
Maybe I should turn MSDOSFS_LARGE **OFF** ? I'll keep you posted.
Brian
Kevin Kinsey wrote:
Brian M. Kincaid wrote:
Hello,
Is there an upper limit to the size of a FAT32 file system in the
FreeBSD msdosfs code?
I put in an 80GB drive recently and there have been problems. There is
no problem
Paul Mather wrote:
Do you have swap on your geom_mirror?
Yes.
In earlier versions of
geom_mirror, even a clean shutdown would cause a mirror to be marked
degraded if swap was still active. The fix at the time was to amend the
stop_cmd in /etc/rc.d/swap1 to do an explicit swapoff -a (or
I am having a problem building from ports, which is a fairly rare
experience for me.
When I try to make the current port of the MySQL 4.1 server under
FreeBSD 4.10, I get a huge stream of undefined reference errors at
the link step for mysqld. It would seem it can't find any
thread-related
- restart and pressed 4 at boot menu: single user
mount -aw
chpass and changed both shells to /usr/local/bin/bash
bash-3.00$ would not read .bashrc, so i switched root to /bin/csh and my
User to /bin/tcsh. seems to be okay.
Darrel
___
At 10:33 PM 4/18/2005, Kris Kennaway wrote:
OK, but I don't care about your HO on this matter.
You may not, but users of FreeBSD do. At the very least,
ports should be tagged as to the versions of the OS
with which they will work, and it should be possible
to retrieve the most recent version of
On Tue, Apr 19, 2005 at 08:37:43PM -0600, Brett Glass wrote:
At 10:33 PM 4/18/2005, Kris Kennaway wrote:
OK, but I don't care about your HO on this matter.
You may not, but users of FreeBSD do.
Those users of FreeBSD who care about supporting the ports collection
in a given configuration,
So my IT department won't open port 5999 so I can't access the servers
with cvsup.
Is there some manual method to synchronize my installation? Can I just
ftp a recent
copy of ports.tar.gz and replace my installed /usr/ports directory? In
particular, I just
installed 5.3-Release from cdrom,
At 08:58 PM 4/19/2005, Kris Kennaway wrote:
Those users of FreeBSD who care about supporting the ports collection
in a given configuration, do so. They don't just send mails
complaining that someone else should do it for them.
What are you talking about? The maintainer of each port DOES
OK, but I don't care about your HO on this matter.
(B
(B You may not, but users of FreeBSD do.
(B
(Bmmm . . .
(B
(B At the very least,
(B ports should be tagged as to the versions of the OS
(B with which they will work, and it should be possible
(B to retrieve the most recent version of
On Tue, Apr 19, 2005 at 02:02:39PM -1000, Clifton Royston wrote:
When I try to make the current port of the MySQL 4.1 server under
FreeBSD 4.10, I get a huge stream of undefined reference errors at
the link step for mysqld.
More factoids - the same error continues to happen:
* After
On Tue, Apr 19, 2005 at 05:22:29PM -1000, Clifton Royston wrote:
... so I can see that gcc 2.95 and gcc 3.3 would be handled quite
differently by these conditional defines. I am starting to think this
might be a toolchain issue, where the ports have gotten out of sync
with what the default
Dear All,
I've noticed that transferring files (using the scp command) between a
laptop and a desktop is very slow when using FreeBSD. The laptop is
running Linux (Debian). The desktop is dual-boot (Debian and FreeBSD).
When I boot FreeBSD and scp files to the laptop, transfer times are very
On Wed, Apr 20, 2005 at 11:46:12AM +0800, Robert Storey wrote:
Dear All,
I've noticed that transferring files (using the scp command) between a
laptop and a desktop is very slow when using FreeBSD. The laptop is
running Linux (Debian). The desktop is dual-boot (Debian and FreeBSD).
When I
88 matches
Mail list logo
