* Mike Jeays [EMAIL PROTECTED]:
Now I have /dev/da0, but no /dev/da0s1.
No matter what I try with camcontrol, I don't get da0s1.
By accident I found out that after I mount /dev/da0 (which of course
doesn't give me any files on the stick) and umount it, I get /dev/
da0s1. What's going
Hi
On Sat, 2005-04-23 at 12:39 +0200, Erik Nrgaard wrote:
Hi,
I have had problems recently keeping my 5.3 up, then I upgraded to
5.4-RC2. Things seemed stable, but then I just ran last:
norgaard ttyp1charmSat 23 Apr 12:05 still
logged in
norgaard
Carolina Mallol wrote:
I have a kangaroo usb hard disk that stopped working (skips, makes
strange vibrating clicking noises and the computer does not recognize it.
could you offer any help? suggestions?
Maybe a strange suggestion from recent articles from technical
newspapers published here:
The FreeBSD Diary contains a large number of practical
examples and how-to guides. This message is posted weekly
to freebsd-questions@freebsd.org with the aim of letting people
know what's available on the website. Before you post a question
here it might be a good idea to first search the
I'm curious what clients people use to send data to icecast. I tried
the native client, ices, but it kept bus erroring. I've found
oddcastv3-jack and I'm working on porting it to freebsd.
Also, how well does jack work on FreeBSD. I can't seem to get it to
work. Any tips on using it? Every
my machine use the broadcom 5721 pci express NIC,
but the 5.3 release of freebsd only support 5701 of this band
i have gone to the ftp.freebsd.org
but there are so many , i cannot find the patch or the iso of the
FreeBSD 5.3 CURRENT version ,which kindhearted could thell me how?
i only want the
On Apr 23, 2005, at 3:54 PM, Chris Zumbrunn wrote:
On Apr 23, 2005, at 1:27 PM, [EMAIL PROTECTED] wrote:
Turn off power management in PC bios and try again.
Thanks, I'll try that.
When this happend to me before, I fdisk'ed, disklabel'ed,
atacontrol'ed, sysinstall'ed, dd'ed, newfs'ed, boot0cfg'ed
kylin schrieb:
my machine use the broadcom 5721 pci express NIC,
but the 5.3 release of freebsd only support 5701 of this band
i have gone to the ftp.freebsd.org
but there are so many , i cannot find the patch or the iso of the
FreeBSD 5.3 CURRENT version ,which kindhearted could thell me how?
i
Hello list,
does the non-official support for 5.2.1 still exist?
With regards
Stevan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello people,
When it comes to the Intel platform, I can always find my way around,
but in this one case of AMD, I am purely clueless. I don't even know
what keyword to search for in the handbook, FAQ, google.
Attached you will find the dmesg output of an oldish box on which I
just installed
On Sun, Apr 24, 2005 at 09:44:08AM +0200, Stevan Tiefert wrote:
Hello list,
does the non-official support for 5.2.1 still exist?
I don't know what you're asking.
Kris
pgpR7VaTUBoAX.pgp
Description: PGP signature
On Sun, Apr 24, 2005 at 10:51:32AM +0300, Odhiambo Washington wrote:
Hello people,
When it comes to the Intel platform, I can always find my way around,
but in this one case of AMD, I am purely clueless. I don't even know
what keyword to search for in the handbook, FAQ, google.
Attached
Kris Kennaway schrieb:
On Sun, Apr 24, 2005 at 09:44:08AM +0200, Stevan Tiefert wrote:
Hello list,
does the non-official support for 5.2.1 still exist?
I don't know what you're asking.
Kris
That's bad...
___
freebsd-questions@freebsd.org mailing
On Sun, Apr 24, 2005 at 10:25:16AM +0200, Stevan Tiefert wrote:
Kris Kennaway schrieb:
On Sun, Apr 24, 2005 at 09:44:08AM +0200, Stevan Tiefert wrote:
Hello list,
does the non-official support for 5.2.1 still exist?
I don't know what you're asking.
Kris
That's bad...
Kris Kennaway schrieb:
On Sun, Apr 24, 2005 at 10:25:16AM +0200, Stevan Tiefert wrote:
Kris Kennaway schrieb:
On Sun, Apr 24, 2005 at 09:44:08AM +0200, Stevan Tiefert wrote:
Hello list,
does the non-official support for 5.2.1 still exist?
I don't know what you're asking.
On Sun, Apr 24, 2005 at 09:44:08AM +0200, Stevan Tiefert wrote:
Hello list,
does the non-official support for 5.2.1 still exist?
Feel free to ask your questions on this list. But for a lot of questions
the answer will probably be to update your system.
So if you have trouble, update your
Roland Smith schrieb:
On Sun, Apr 24, 2005 at 09:44:08AM +0200, Stevan Tiefert wrote:
Hello list,
does the non-official support for 5.2.1 still exist?
Feel free to ask your questions on this list. But for a lot of questions
the answer will probably be to update your system.
So if you have
Hi all!
So I got snortsnarf to work but now I'm stuck again..
I installed swatch to monitor the auth.log for those (in-)famous Illegal
user lines and take som actions on them. I have some ideas what I want to
do (firewall the IP-address out for good) but I've started pretty basic.
I am setting
On Sun, 2005-04-24 at 11:11 +0200, Stevan Tiefert wrote:
Hello Kris,
to explain better, what I want (It was my job to specify better what I
want :-)
Does the RELENG_5_2 security branch still exist? And if not, when and
where did they annouced to stop the support for 5.2.1?
With
Andreas Rudisch schrieb:
On Sun, 2005-04-24 at 11:11 +0200, Stevan Tiefert wrote:
Hello Kris,
to explain better, what I want (It was my job to specify better what I
want :-)
Does the RELENG_5_2 security branch still exist? And if not, when and
where did they annouced to stop the support for
On Sun, Apr 24, 2005 at 11:23:33AM +0200, Stevan Tiefert wrote:
I have no problem with my system. I was only wondering about the last
one or two security advisories concerning the patchlevel of the
releases! The 5.2.1-release is not appearing anymore and I think that I
was not announced
Roland Smith schrieb:
On Sun, Apr 24, 2005 at 11:23:33AM +0200, Stevan Tiefert wrote:
I have no problem with my system. I was only wondering about the last
one or two security advisories concerning the patchlevel of the
releases! The 5.2.1-release is not appearing anymore and I think that I
Hi all,
I'm having a hard time installing the Azureus port. I use FreeBSD 5.3
Release on an i386 box, with Xorg 6.0.7_1 and KDE 3.3.0_4. My port tree
have been updated with CVSup.
I have located azureus-2.2.0_6 in the 5-STABLE/i386 section of
http://www.freebsd.org/ports/index.html
During my
Odhiambo Washington schrieb:
* Stevan Tiefert [EMAIL PROTECTED] [20050424 10:44]: wrote:
Hello list,
does the non-official support for 5.2.1 still exist?
No!
Because 5.3 is out and there is even 5.4-RC ;-)
-Wash
http://www.netmeister.org/news/learn2quote.html
What ever happend to the old telnet style bb shells? I would much rather
run one of those ;)
On Wed, 2005-04-20 at 11:08 +0400, Andrew P. wrote:
Graham Bentley wrote:
And has more security problems than Carter has liver pills
If more people are using a project like phpBB surely there
On Sun, Apr 24, 2005 at 11:35:47AM +0200, Stevan Tiefert wrote:
Andreas Rudisch schrieb:
On Sun, 2005-04-24 at 11:11 +0200, Stevan Tiefert wrote:
Hello Kris,
to explain better, what I want (It was my job to specify better what I
want :-)
Does the RELENG_5_2 security branch
i find it difficult to use root account when i telnet to freebsd 5.3
release , anything need to change?
thank you
--
we who r about to die,salute u!
___
freebsd-questions@freebsd.org mailing list
On Sun, 2005-04-24 at 11:49 +0200, Stevan Tiefert wrote:
Hello Wash,
a small question: Why is then 4.11, 4.10 still supported? :-)
With regards
Stevan
4.10 and 4.11 are from the STABLE-branch. As far as I know 5.2.1 was the
CURRENT-branch which let to the 1st STABLE 5 version FreeBSD 5.3
I'm looking for a way getting various handbook's sources via cvsup,
common handbook English/German and some developers handbooks
(developer, porter).
On each nstallation CD I can find various handbook types (PS, PDF,
HTML). My intention is having a local webserver at the department
keeping
On Sun, Apr 24, 2005 at 06:09:38PM +0800, kylin wrote:
i find it difficult to use root account when i telnet to freebsd 5.3
release , anything need to change?
You're not supposed to log in as root over telnet. It would expose the root
password to anybody intercepting your IP traffic.
It would
Is this on one computer or across multiple machines running 5.4? My
first thought is of a dying hard drive. Run low level disk repair tools
from your hard drives' manufacturer.
On Thu, 2005-04-21 at 15:28 +1000, Warren wrote:
im running FreeBSD 5.4 and have /var as well as all the other
thank u for your advise! but now i am in a very save local network
,and the su return sorry in my telnet,
so is that mean i have to go to ssh? or can i chage some file to enable it
thank u and best wishes
On 4/24/05, Roland Smith [EMAIL PROTECTED] wrote:
On Sun, Apr 24, 2005 at 06:09:38PM
I have domain configured so *.domain.tld are A record to same IP. Now
I have apache vhosts so www.domain.tld and domain.tld goes to apache
data dir and webmail.domain.tld goes to webmail data dir.
Problem is howto forward those all others to certain directory. s it
possible to make *.domain.tld
* Loren M. Lang [Sun, 24 Apr 2005 at 09:15 GMT]:
I'm curious what clients people use to send data to icecast. I tried
the native client, ices, but it kept bus erroring. I've found
oddcastv3-jack and I'm working on porting it to freebsd.
Also, how well does jack work on FreeBSD. I can't
* O. Hartmann [Sun, 24 Apr 2005 at 12:21 GMT]:
I'm looking for a way getting various handbook's sources via cvsup,
common handbook English/German and some developers handbooks
(developer, porter).
On each nstallation CD I can find various handbook types (PS, PDF,
HTML). My intention is
* Drew Tomlinson [Tue, 19 Apr 2005 at 18:10 GMT]:
I'm trying to install an unofficial port of MythTV Gallery. It looks
for exif.10 library but doesn't find it even after installing
libexif-0.6.12_1. Does the port makefile need to updated or do I need
to install something else to get
On Sun, 24 Apr 2005 12:21:53 +0200
O. Hartmann [EMAIL PROTECTED] wrote:
I'm looking for a way getting various handbook's sources via cvsup,
common handbook English/German and some developers handbooks
(developer, porter).
On each nstallation CD I can find various handbook types (PS,
u have to log in with your normal account that is not your root account...
add this account to the group wheel and su to root...
- Original Message -
From: kylin [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org; kylin [EMAIL PROTECTED]
Sent: Sunday, April 24, 2005 12:53 PM
Subject:
abbendum: but think about the problem that your data is send unencrypted
over the network if u make no ssh logins
- Original Message -
From: kylin [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org; kylin [EMAIL PROTECTED]
Sent: Sunday, April 24, 2005 12:53 PM
Subject: Re: how to enable
um hi
On Sun, 2005-04-24 at 18:53 +0800, kylin wrote:
thank u for your advise! but now i am in a very save local network
,and the su return sorry in my telnet,
so is that mean i have to go to ssh? or can i chage some file to enable it
thank u and best wishes
On 4/24/05, Roland Smith
http://www.onlamp.com/pub/a/apache/2003/07/24/vhosts.html
- Original Message -
From: Perttu Laine [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Sent: Sunday, April 24, 2005 12:58 PM
Subject: apache vhost help.
I have domain configured so *.domain.tld are A record to same IP. Now
I
Tilman Linneweh wrote:
* O. Hartmann [Sun, 24 Apr 2005 at 12:21 GMT]:
I'm looking for a way getting various handbook's sources via cvsup,
common handbook English/German and some developers handbooks
(developer, porter).
On each nstallation CD I can find various handbook types (PS, PDF,
I have problems with Azureus 2.2.0.2 (from ports). It shutdowns
without any error message on logs or anything. Sometimes it runs for
hour sometimes a day and few times even for a week. But then suddenly
it just dissappears with no warning. Anybody have idea what could be
wrong?
--
kpn @ IRCnet
Perttu Laine wrote:
I have domain configured so *.domain.tld are A record to same IP. Now
I have apache vhosts so www.domain.tld and domain.tld goes to apache
data dir and webmail.domain.tld goes to webmail data dir.
Problem is howto forward those all others to certain directory. s it
possible to
Hi,
I tried to check the root partition with fsck and it found errors and
for my greatest surprise, it answered its questions automatically with
no. It is due to the securelevel 2? I've been thinking whether fsck uses
direct access (which is denied by the securelevel) or not?
Cheers,
Gábor
Where would you all recommend that one can go to find good FreeBSD tech
support that does not cost $150+ an hour?
If there are no places that are less expensive, then what places do you
recommend that are expensive?
I am having a SCSI controller boot problem that no one seems to be able to
On Sun, Apr 24, 2005 at 03:49:27PM +0200, Kövesdán Gábor wrote:
Hi,
I tried to check the root partition with fsck and it found errors and
for my greatest surprise, it answered its questions automatically with
no. It is due to the securelevel 2? I've been thinking whether fsck uses
direct
On Sun, Apr 24, 2005 at 03:49:27PM +0200, K?vesd?n G?bor wrote:
Hi,
I tried to check the root partition with fsck and it found errors and
for my greatest surprise, it answered its questions automatically with
no. It is due to the securelevel 2? I've been thinking whether fsck uses
direct
Hey everyone,
I would like to bock all traffic from one host, the problem is the data
isn't comming from that host anymore, it is redirected from my router, I
am using PF as firewall, this is te ruleset I wanted to use for it:
block in from { example.host.com , example2.secondhost.com } to any
On Sunday 24 April 2005 15:58, ChrisC wrote:
Where would you all recommend that one can go to find good FreeBSD tech
support that does not cost $150+ an hour?
If there are no places that are less expensive, then what places do you
recommend that are expensive?
I am having a SCSI
Fridtjof Busse wrote:
* Mike Jeays [EMAIL PROTECTED]:
Now I have /dev/da0, but no /dev/da0s1.
No matter what I try with camcontrol, I don't get da0s1.
By accident I found out that after I mount /dev/da0 (which of course
doesn't give me any files on the stick) and umount it, I get /dev/
da0s1.
A newbie with installing FreeBSD 5.3...I installed X and got excited to
direcly log on to X (xdm) with the dialog box. I modified the lineto turn
xterm on:
ttyv8 /usr/X11R6/bin/xdm - nodaemon xterm ON secure.
Now I am stuck in a login loop... I would like to configure X and install
KDE, but it
On Sun, Apr 24, 2005 at 02:37:23PM +, Michael Neeff wrote:
A newbie with installing FreeBSD 5.3...I installed X and got excited to
direcly log on to X (xdm) with the dialog box. I modified the lineto turn
xterm on:
ttyv8 /usr/X11R6/bin/xdm - nodaemon xterm ON secure.
Now I am stuck in a
What are the tools that I should use to audit an existing
FreeBSD installation? Without changing anything, I wish
to quickly determine what is installed, i.e., the basic
system, ports and packages, and then to compare what is
installed to the currently available versions.
Jay O'Brien
Rio
On Sun, Apr 24, 2005 at 08:02:39AM -0700, Jay O'Brien wrote:
What are the tools that I should use to audit an existing
FreeBSD installation? Without changing anything, I wish
to quickly determine what is installed, i.e., the basic
system, ports and packages, and then to compare what is
* Dan Olson [EMAIL PROTECTED]:
For me to get da0s1 to appear I use the command:
cat /dev/null /dev/da0
I think there is a timing issue with my device, a Kingston Elite.
Great, thanks, that works for me as well.
I also found out it works if the stick is plugged in at boot time.
After all,
Hello,
I've got a 5.3 box that i've got usermin and webmin running on
perrequest. I want to set this up in such a way that anyone on the local
subnet will be able to access either, but that any external access is
handled by something similar to sshd's AllowGroup directive, anyone in the
group
Basic info: FreeBSD 5.3
I have been trying to use cvsup to sync up my ports, but it seems to
hang everytime, see the following...
rainier# cvsup -L 2 -h cvsup10.FreeBSD.org /root/ports-supfile
Parsing supfile /root/ports-supfile
Connecting to cvsup10.FreeBSD.org
Connected to cvsup10.FreeBSD.org
On Sun, Apr 24, 2005 at 11:11:44AM +0200, Stevan Tiefert wrote:
to explain better, what I want (It was my job to specify better what I
want :-)
Does the RELENG_5_2 security branch still exist? And if not, when and
where did they annouced to stop the support for 5.2.1?
Check
Okay the solution is to disable COM and Parallel ports in the bios.
(Maybe also USB KB, and USB FDD). To access the bios you have to press
ESC while the red TOSHIBA boot screen is displayed, then press F1. (I
explain that becaused it's undocumented).
With the default settings, I even got the 5.x
ChrisC wrote:
Where would you all recommend that one can go to find good FreeBSD tech
support that does not cost $150+ an hour?
This mailing list usually does a pretty good job, considering, and it's
free.
However, someone located on-site or near to where-ever the machine is, is
going to do a
Brian John [EMAIL PROTECTED] writes:
Hello,
k3b stopped working on me when I upgraded my ports. This is what it
says when I try to start it up:
Could not start process Unknown protocol 'file'..
Could not find mime type
application/octet-stream
Any clue what might cause this? I'm
Erik Trulsson wrote:
On Sun, Apr 24, 2005 at 08:02:39AM -0700, Jay O'Brien wrote:
What are the tools that I should use to audit an existing
FreeBSD installation? Without changing anything, I wish
to quickly determine what is installed, i.e., the basic
system, ports and packages, and then to
On Sun, Apr 24, 2005 at 01:08:55PM -0700, Jay O'Brien wrote:
Erik Trulsson wrote:
On Sun, Apr 24, 2005 at 08:02:39AM -0700, Jay O'Brien wrote:
What are the tools that I should use to audit an existing
FreeBSD installation? Without changing anything, I wish
to quickly determine what is
Steven R Howe [EMAIL PROTECTED] writes:
Hello,
In attempting to build firewalk from the ports collection, I received
the following error:
cc -DHAVE_CONFIG_H -I. -I. -I../include -I/usr/local/include -O -pipe
-Wall
-c init.c
init.c: In function `fw_init_net':
init.c:156:
Tuc [EMAIL PROTECTED] writes:
Hi,
I'm planning on deploying a few servers, each of which will be
doing some same things (Web, mail, etc) and some that will have other
tasks (MRTG, IRRPT, etc).
I'm to the point where going to upgrade software or make a config
change on 10
Cezar Fistik [EMAIL PROTECTED] writes:
Hello Kendall,
Friday, April 22, 2005, 8:50:42 PM, you wrote:
Anyhow, my understanding is that the current work-around to this
problem is to turn DMA off for your ata drives. I guess this can be
done manually with the atacontrol command as I've
RW [EMAIL PROTECTED] writes:
I have fstab entries for several devices that aren't mounted at boot, but
when
mounting as an ordinary user, I can only mount a device on a mount-point that
I own.
Is it possible to relax this so that any user in the operator group can make
use of the same
On Sat, Apr 23, 2005 at 12:43:48PM -0400, Louis LeBlanc wrote:
This is OT, I know, but there's gotta be someone on this list that
knows the various HTTP specs better than I do. I do know them better
than your average bear, at least, but apparently not as well as I
thought.
I seem to
Lowell Gilbert wrote:
Tuc [EMAIL PROTECTED] writes:
I'm to the point where going to upgrade software or make a config
change on 10 servers gets really annoying. I was looking to do something
a little different. I know there are other things out there to do this
(cfengine) but wondered if that
Thanks for the reply.
-
I have tried posting the problem in the bsdforums.com as well as on
this mailing list but no one seems to be able to help.
-
In my mind there is always the possibility of a problem being a pebkac
but this problem only occurs with FreeBSD. The SCSI
On Sun, 2005-04-24 at 15:30 +0300, Perttu Laine wrote:
I have problems with Azureus 2.2.0.2 (from ports). It shutdowns
without any error message on logs or anything. Sometimes it runs for
hour sometimes a day and few times even for a week. But then suddenly
it just dissappears with no warning.
Hi there, sorry if this is offtopic, but I'm a bit lost as to where
else to ask.
I have cyrus-sasl2, cyrus-sasl2-saslauthd and Postfix installed
from ports on a FreeBSD 5.3-R system. I'm trying to get SASL2
getpwent auth working with Postfix. Unfortunately, I keep getting
the following error:
Clifton Royston wrote:
On Sun, Apr 24, 2005 at 01:08:55PM -0700, Jay O'Brien wrote:
Erik Trulsson wrote:
On Sun, Apr 24, 2005 at 08:02:39AM -0700, Jay O'Brien wrote:
What are the tools that I should use to audit an existing
FreeBSD installation? Without changing anything, I wish
to quickly
People,
When I try to use CVSUP ... if I use the script with:
tag=. ... what it mean ? It mean 5.4 or 5.3 sources ?
How is possible to put the system in the current version and in the
stable version ?
Thanks a lot
giuliano
___
Am Montag, 25. April 2005 01:59 schrieb Giuliano Cardozo Medalha:
People,
When I try to use CVSUP ... if I use the script with:
tag=. ... what it mean ? It mean 5.4 or 5.3 sources ?
It's HEAD, which is 6-current, the developers code base ;)
You want RELENG_5_4 for 5.4 sources and RELENG_5
hi all, i recently attempted to portupgrade the kde super package and had loads of problems. i first upgraded from FreeBSD 4.10 to FreeBSD 4.11, and then cvsup'd 'ports-all'.
i then did portupgrade -R kde, but ran into several issues. a common error was:
Program X has conflicts with the
On Mon, Apr 25, 2005 at 11:21:47AM +, Iain Dooley wrote:
hi all, i recently attempted to portupgrade the kde super package and had
loads of problems. i first upgraded from FreeBSD 4.10 to FreeBSD 4.11, and
then cvsup'd 'ports-all'.
i then did portupgrade -R kde, but ran into several
I use a Benchmark DLT tape drive to backup data on my DELL PowerEdge 2650
system [...]
The problem I see is that data flow is not steadily streaming; the tape
drive is operating in start-stop-mode.
I use team(1) (/usr/ports/misc/team) to bufferize the acces to a tape
drive, in a command like:
On 4/24/2005 4:08 AM Tilman Linneweh wrote:
* Drew Tomlinson [Tue, 19 Apr 2005 at 18:10 GMT]:
I'm trying to install an unofficial port of MythTV Gallery. It looks
for exif.10 library but doesn't find it even after installing
libexif-0.6.12_1. Does the port makefile need to updated or do I
I have fstab entries for several devices that aren't mounted at boot, but
(B when mounting as an ordinary user, I can only mount a device on a
(B mount-point that I own.
(B
(B Is it possible to relax this so that any user in the operator group can
(B make use of the same fstab
[EMAIL PROTECTED] wrote:
Where would you all recommend that one can go to find good FreeBSD
tech support that does not cost $150+ an hour?
Why are you so hung up on the billing rate?
Problems with Windows take much longer to fix than problems with
FreeBSD, so your going to end up paying the
# cd /usr/ports/print/teTex
# make install
[...snip...]
making all in programs/x11perf...
cc -O -pipe -ansi -pedantic -Wno-system-headers -Dasm=__asm -Wall
-Wpointer-arith -Wundef -I/usr/ports/x11/xorg-clients/work/xc
-I/usr/ports/x11/xorg-clients/work/xc/exports/include
On 4/24/05, Alex Soares de Moura [EMAIL PROTECTED] wrote:
Abu Khaled wrote:
Greetings...
I don't know much about scripting but i tried to write one to scan my
local network using the net/arping port.
here is the script:
sciprt start
#!/bin/sh
IP=1
while [ $IP -le 20 ]
do
echo -e .\c
Abu Khaled wrote:
On 4/24/05, Alex Soares de Moura [EMAIL PROTECTED] wrote:
Abu Khaled wrote:
Greetings...
I don't know much about scripting but i tried to write one to scan my
local network using the net/arping port.
here is the script:
sciprt start
#!/bin/sh
IP=1
while [ $IP -le 20 ]
do
echo -e
85 matches
Mail list logo
