On Jun 28, 2005, at 11:58 PM, Ted Mittelstaedt wrote:
But with port 25 your ISP really has it backwards. The block is
supposed
to be for OUTBOUND traffic for a DESTINATION of port 25. This
prevents
your ISP from hosting spammers and viruses. Blocks on INBOUND traffic
with a destination
On Tuesday 28 June 2005 19:24, Casper wrote:
Hi,
I have setup 2 jails in FreeBSD 5.4
when they start, abouth have some error for /dev/log...
like that:
#jail /jail/mail/ mail 127.0.0.2 /bin/sh /etc/rc
Loading configuration files.
mail
Setting hostname: mail.
ln: /dev/log: Operation not
pid 80941 (tcsh), uid 5051 inumber 166876 on /local/jails/jail1:
filesystem full
pid 80941 (tcsh), uid 5051 inumber 166876 on /local/jails/jail1:
filesystem full
pid 80941 (tcsh), uid 5051 inumber 166876 on /local/jails/jail1:
filesystem full
pid 80941 (tcsh), uid 5051 inumber 166876 on
Hi,
First of all sorry for a bit of haste and not having followed this list for too
long before I post here some possibly stupid questions. I suffered a hdd crash
some time ago with my laptop and got finally the impulse to do what I have
planned doing for quite some time; to create a server at
Mike Jeays wrote:
man expr to give the short answer to your first question:
As an example, x=`expr $x + 1`
536 ~ $ x=4
537 ~ $ x=`expr $x + 1`
538 ~ $ echo $
Note the back-quotes to execute a command and return the result, and the
need for spaces between each token in the expr command.
Hello,
I'm trying to get pxeboot running without any success so far.
I get 'BTX halted' after a register dump showing an int 6.
I read almost anything, I could find about that problem.
I tried with/without LOADER_TFTP_SUPPORT, I uncommented
those delay() lines in pxe.c and enlarged the delays.
I
Hello.
I'm trying to get a sub-to-rs232 adaptor running with FreeBSD-5.
The vendor of this adaptor is some chinese company named
High-Edge Tech, but as usbdevs shows, it identifies as
USB_VENDOR_PROLIFIC(0x067b) and USB_PRODUCT_PROLIFIC_PL2303(0x2303).
For testing, I connect the adaptor with
Chad Leigh -- Shire.Net LLC wrote:
[...]
pid 80941 (tcsh), uid 5051 inumber 166876 on /local/jails/jail1:
filesystem full
[...] Is the inumber 166876 an inode inside the filesystem? Or
what does it refer to?
It is an inode number of the filesystem that has been mounted to
On Sun, Jun 26, 2005 at 09:33:19PM +0200, Vittorio De Martino wrote:
uname -a
FreeBSD fbsd.grtn 5.4-RELEASE-p2 FreeBSD 5.4-RELEASE-p2 #0: Sat Jun 25
17:40:47 CEST 2005
I have the following in
in make.conf
CPUTYPE=p4
CFLAGS= -O2 -pipe -funroll-loops
COPTFLAGS= -O2 -pipe
That looks like a firewall message.
Change your /etc/syslog.conf file to not display those messages to the console.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Gerard Seibert
Sent: Tuesday, June 28, 2005 8:17 PM
To: freebsd-questions@freebsd.org
Subject:
Hello,
I think the net.link.ether.inet.log_arp_movements and
net.link.ether.inet.log_arp_wrong_iface sysctls should control the arp
messages in /var/log/messages. I don't want to see this kind of errors,
thus I've set them to 0. Now there mustn't be any arp logs in
/var/log/messages, must
Folks,
I don't want to scare anyone but today QT4 was released and their web page
(http://www.trolltech.com/download/opensource.html)
specifically states several times that if using the free version one is
required to release their own code under GPL. That's effectively a
requirement to
Hello,
I'm running 5.4 on a dual boot machine with winxp. Here's the relevant line
of /etc/fstab:
/dev/ad0s2 /mntntfsrw 0 0
It mounts fine with no errors at boot time, but I seem to have read-only
access.
I've done a bit of googling about this
writing into NTFS it is not officialy supported yet.
on of the solutions - is to create some partition with FAT32 for
example and use it. :-)
On 6/29/05, Ben Paley [EMAIL PROTECTED] wrote:
Hello,
I'm running 5.4 on a dual boot machine with winxp. Here's the relevant line
of /etc/fstab:
I think you'll need to allow stat permission too - say rxs not
just rx.
You may also want to think about what this rule does to /tmp.
David.
Works fine in this way, thanks.
Cheers,
Gábor Kövesdán
___
freebsd-questions@freebsd.org
On Wednesday 29 June 2005 12:30, Danny Pansters wrote:
Folks,
I don't want to scare anyone but today QT4 was released and their web page
(http://www.trolltech.com/download/opensource.html)
specifically states several times that if using the free version one is
required to release their own
On Wednesday 29 June 2005 13:22, Mantas Smelevicius wrote:
writing into NTFS it is not officialy supported yet.
on of the solutions - is to create some partition with FAT32 for
example and use it. :-)
Mantas,
I had thought of that, but hoped there was a more elegant solution!
Oh well,
Hello,
I have just configured a refuse file for my mail server, I was
wondering if the format of my file is ok...
doc/bn_*
doc/da_*
doc/de_*
doc/el_*
doc/es_*
doc/it_*
doc/ja_*
doc/nl_*
doc/no_*
doc/pl_*
doc/pt_*
doc/ru_*
doc/sr_*
doc/tr_*
doc/zh_*
ports/arabic*
ports/astro*
ports/audio*
Am Mittwoch, 29. Juni 2005 10:55 schrieb Norbert Koch:
Hello.
I'm trying to get a sub-to-rs232 adaptor running with FreeBSD-5.
The vendor of this adaptor is some chinese company named
High-Edge Tech, but as usbdevs shows, it identifies as
USB_VENDOR_PROLIFIC(0x067b) and
For one who wants to host email accounts for multiple domains, which is
better? I've started installing and configuring qmail according to the
tutorial on qmailrocks.org but i'm wondering if i should stop and consider
postfix before pressing on.
Thanks.
I prefer postfix as it supports smtp auth, unlike qmail which doesn't.
(Qmail requires a hack to do so)
On 6/29/05, [EMAIL PROTECTED] [EMAIL PROTECTED]
wrote:
For one who wants to host email accounts for multiple domains, which is
better? I've started installing and configuring qmail
Hello,
Does anyone know if there is a way to read mail with unix mail
program?
I've been using this program since couple of years and I am quite
happy with It…
I can't seem to find a shortcut to have It read maildir format…
Thanks.
Dear Sir,
I am working on postfix Mailserver at freebsd.and install the courier Imap
(courier-imap-4.0.2,1) and courier-authlib-0.55 in the system.and also
Configuration the setting of courier-imap with mysql.When i authenticate the
mysql pop user with courier-imap.
And run the following
On 6/29/2005 at 8:48 AM [EMAIL PROTECTED] wrote:
|For one who wants to host email accounts for multiple domains, which
is
|better? I've started installing and configuring qmail according to the
|tutorial on qmailrocks.org but i'm wondering if i should stop and
consider
|postfix before pressing
Dear Sir,
I am working on postfix Mailserver at freebsd.and install the courier Imap
(courier-imap-4.0.2,1) and courier-authlib-0.55 in the system.and also
Configuration the setting of courier-imap with mysql.When i authenticate the
mysql pop user with courier-imap.
And run the following
Dear Sir,
I am working on postfix Mailserver at freebsd.and install the courier Imap
(courier-imap-4.0.2,1) and courier-authlib-0.55 in the system.and also
Configuration the setting of courier-imap with mysql.When i authenticate the
mysql pop user with courier-imap.
And run the following
I don`t know what this script doing... :)
I don`t know what to try reproduce by myself...
ln /dev/log ?
Casper
Bernhard Fischer wrote:
On Tuesday 28 June 2005 19:24, Casper wrote:
Hi,
I have setup 2 jails in FreeBSD 5.4
when they start, abouth have some error for /dev/log...
like that:
if you carefully read this log line.
28/06/2005 15:59:23.743138 vr0 @0:28 b 201.238.78.59,4550 -
192.168.1.1,60271 PR tcp len 20 40 -AF IN
what it is saying, 201.238.78.59 on port 4550 wants to make a connection
INTO my network.
now it is making this connection because one my my LAN users, is
On Wednesday 29 June 2005 14:12, Muhammad Kashif Yaqoob wrote:
I am working on postfix Mailserver at freebsd.and install the courier Imap
(courier-imap-4.0.2,1) and courier-authlib-0.55 in the system.and also
Configuration the setting of courier-imap with mysql.When i authenticate
the mysql
On 29/06/2005 11:13 PM, MikeM wrote:
On 6/29/2005 at 8:48 AM [EMAIL PROTECTED] wrote:
|For one who wants to host email accounts for multiple domains, which
is
|better? I've started installing and configuring qmail according to the
|tutorial on qmailrocks.org but i'm wondering if i should stop
On Wednesday 29 June 2005 14:12, Muhammad Kashif Yaqoob wrote:
I am working on postfix Mailserver at freebsd.and install the courier Imap
(courier-imap-4.0.2,1) and courier-authlib-0.55 in the system.
...
authdaemonrc
=
authmodulelist=authmysql
daemons=5
version=
On Wed, 29 Jun 2005 08:48:11 -0400
[EMAIL PROTECTED] wrote:
For one who wants to host email accounts for multiple domains, which
is better? I've started installing and configuring qmail according to
the tutorial on qmailrocks.org but i'm wondering if i should stop and
consider postfix before
Ben Paley wrote:
On Wednesday 29 June 2005 13:22, Mantas Smelevicius wrote:
writing into NTFS it is not officialy supported yet.
on of the solutions - is to create some partition with FAT32 for
example and use it. :-)
Mantas,
I had thought of that, but hoped there was a more
Hello,
could somebody tell me how to reboot the root filesystem in read-write
mode under single user mode?
Thanks,
Gábor Kövesdán
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On Wed, 29 Jun 2005, [ISO-8859-1] Kövesdán Gábor wrote:
could somebody tell me how to reboot the root filesystem in read-write
mode under single user mode?
# mount -u /
The -u option is actually the update option, which tries to restore the
mount options of the file system to the
# mount -u /
The -u option is actually the update option, which tries to restore
the mount options of the file system to the defaults defined in
/etc/fstab
(which includes rw too).
I've tried it, but when I run fsck it wrtites:
** /dev/as0s1a (NO WRITE)
And if I try to enable MAC
So the answer is still the same.
You have to add rules to your firewall to allow
that new service in and out of your firewall.
Come on guy you are making this much harder that it really is.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Stephan
Weaver
On 6/22/05, Rogue_Spider [EMAIL PROTECTED] wrote:
On 13 Jun 2005 20:08:29 -0400, Lowell Gilbert
[EMAIL PROTECTED] wrote:
Rogue_Spider [EMAIL PROTECTED] writes:
I installed a port acroread from my sysinsall
from freebsd 5.0 iso on my system i than told
kde to use acroread to open all
5.4 has the new uplcom driver which checks the revision maybe you
can apply
the cvs version to your 5.3 (guess).
-Harry
I tested this with RELENG_5 as of last week.
The device seems to be correctly recognized.
I see /dev/ucom0 appearing, when I connect
the adaptor.
Norbert
On Wed, 29 Jun 2005, [ISO-8859-1] Kövesdán Gábor wrote:
# mount -u /
The -u option is actually the update option, which tries to restore the
mount options of the file system to the defaults defined in /etc/fstab
(which includes rw too).
I've tried it, but when I run fsck it wrtites:
On 6/28/2005 10:16 PM Chad Leigh -- Shire.Net LLC wrote:
On Jun 28, 2005, at 9:35 PM, Nikolas Britton wrote:
It looks, i'm not sure, like they're not vaild file names.
They appear like valid filenames to me (and like the names you get
with courier for messages)
The issue is that tar
Danny Pansters wrote:
I don't want to scare anyone but today QT4 was released and their web page
(http://www.trolltech.com/download/opensource.html)
specifically states several times that if using the free version one is
required to release their own code under GPL. That's effectively a
On Wed, 29 Jun 2005, Rogue_Spider wrote:
On 6/22/05, Rogue_Spider [EMAIL PROTECTED] wrote:
On 13 Jun 2005 20:08:29 -0400, Lowell Gilbert
[EMAIL PROTECTED] wrote:
Rogue_Spider [EMAIL PROTECTED] writes:
I installed a port acroread from my sysinsall
from freebsd 5.0 iso on my system i than
* Alex Zbyslaw [2005-06-29 15:07 +0100]
Perhaps you could ask Microsoft to provide support in Windows for
accessing any kind of filesystem other than their own. ;-)
http://ffsdrv.sourceforge.net/
Will let you mount a ffs filesystem on Windows.
Not sure how well tested it is, though
On Wednesday 29 June 2005 16:40, Svein Halvor Halvorsen wrote:
* Alex Zbyslaw [2005-06-29 15:07 +0100]
Perhaps you could ask Microsoft to provide support in Windows for
accessing any kind of filesystem other than their own. ;-)
http://ffsdrv.sourceforge.net/
Will let you mount a ffs
Hello,
I am running FreeBSD 5.3 with linux_base-8 installed.
I have installed the linux version of Matlab 7 (R14) and now when I start
matlab 7 I have this warning message:
/compat/linux/usr/local/Matlab/bin/matlab: line 1: /lib/libc.so.6:
cannot execute binary file
Any idea what does it mean?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ben Paley wrote:
On Wednesday 29 June 2005 16:40, Svein Halvor Halvorsen wrote:
* Alex Zbyslaw [2005-06-29 15:07 +0100]
Perhaps you could ask Microsoft to provide support in Windows for
accessing any kind of filesystem other than their own. ;-)
I am running FreeBSD 5.3 with linux_base-8 installed.
I have installed the linux version of Matlab 7 (R14) and now when I start
matlab 7 I have this warning message:
/compat/linux/usr/local/Matlab/bin/matlab: line 1: /lib/libc.so.6:
cannot execute binary file
Any idea what does it mean?
I have installed it using the matlab install
script : /usr/compat/linux/bin/sh install!
ROd
On Wed, 2005-06-29 at 18:24 +0200, Norbert Koch wrote:
I am running FreeBSD 5.3 with linux_base-8 installed.
I have installed the linux version of Matlab 7 (R14) and now when I start
matlab 7 I have
On Wed, Jun 29, 2005 at 12:29:30PM +0200, Kövesdán Gábor wrote:
Hello,
I think the net.link.ether.inet.log_arp_movements and
net.link.ether.inet.log_arp_wrong_iface sysctls should control the arp
messages in /var/log/messages. I don't want to see this kind of errors,
thus I've set them
I have been trying to find out why my system stops recording in the log files
after few minutes. It will log if restart my syslogd daemon but then stops
recording. I am pasting the commands and all relevant information below. Please
advise, I need the log information!!! Thanks,
VJ
8127 ??
On 6/28/05, John Larson [EMAIL PROTECTED] wrote:
I recently upgraded to perl 5.8.5.. I then issued the
use.perl port command. I then issued the portupgrade
'p5-*' command as root. DBI cannot be found in the
@INC array. what am I missing.
John Larson
South Lake Tahoe CA
Can you tell us a
On 6/28/05, Jonathan Beit-Aharon [EMAIL PROTECTED] wrote:
Is there a way to proceed from here other than to get a binary
distribution and re-start?
I was trying to upgrade the system from 4.11 to 5.4 following the
instructions in the Makefile.
Thanks,
Jonathan
You can't do a fresh
Probably because you have already remounted your root file system as
read-write.
- Giorgos
Okay, thanks. :) You're right, I thought I should remount root in
read-only mode to toggle multilabel since its setting is stored in the
superblock, and when one change it one should write to the
On Sat, Jun 25, 2005 at 08:05:08PM -0700, Bill Schoolcraft wrote:
Hello Family,
Well, now I just had one more question about the FreeBSD-5.4/amd64
system I'm trying to get the mouse working on. I booted in verbose
mode and spotted the following in dmesg:
On Sat, Jun 25, 2005 at 07:32:24PM -0700, Casey Scott wrote:
Has ccd driver support been removed from the 5.4 kernel? Below caused me to
ask the question.
ccdconfig ccd0c 1 0 ad2e ad3e
ccdconfig: Provider not found
or possibly kernel and ccdconfig out of sync
No, but it may not be
On Tue, Jun 28, 2005 at 10:29:43AM -0400, Jonathan Beit-Aharon wrote:
Is there a way to proceed from here other than to get a binary
distribution and re-start?
I was trying to upgrade the system from 4.11 to 5.4 following the
instructions in the Makefile.
I guess you did something out of
That's all very nice, but how about a explanation of
what your are trying to do with logging and what
cron has to do with things.
With no background info what you posted is meaningless.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Dixit,
Viraj
Sent:
Gruss
On Jun 29, 2005, at 3:03 AM, Björn König wrote:
Chad Leigh -- Shire.Net LLC wrote:
[...]
pid 80941 (tcsh), uid 5051 inumber 166876 on /local/jails/jail1:
filesystem full
[...] Is the inumber 166876 an inode inside the filesystem? Or
what does it refer to?
It is an inode
I just installed /usr/ports/java/jdk14 and things *seem* to have gone OK,
however each time I run java I get this:
Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
Is this a problem? If so, how do I correct it?
Thanks,
Michael
On Jun 29, 2005, at 7:25 AM, Casper wrote:
I don`t know what this script doing... :)
I don`t know what to try reproduce by myself...
ln /dev/log ?
I was wondering myself so I did a little research.
It appears that the syslogger does a link (ln -s) from /var/run/log
to /dev/log and that
Well, I will disregard your harsh comments. What I am trying to do is have all
my FTP activity be logged in all.log. If you look at my FTP command it should
be logging whole lot of information and my syslogd command should allow syslogd
to continue writing without any delay. As for cron
On 6/27/05, Bri [EMAIL PROTECTED] wrote:
Howdy,
I'm attempting to use Vinum to concat multiple plexes together to make a
single 4.5TB volume. I've noticed that once I hit the 2TB mark it seems to
fail, it looks like once it hits 2TB the size gets reset to 0. Example below,
[EMAIL
Hello listreaders :-),
maybe this has already be done.
I posted it here, because I couldn't
figure out where to send such little
stuff...
--- 400.passwdless.backup Wed Jun 29 19:21:24 2005
+++ 400.passwdless Wed Jun 29 19:22:10 2005
@@ -45,4 +45,16 @@
*) rc=0;;
esac
+#exit
Go here:
http://unix.derkeiler.com/Mailing-Lists/FreeBSD/newbies/2004-10/0146.html
On 6/29/05, M. Goodell [EMAIL PROTECTED] wrote:
I just installed /usr/ports/java/jdk14 and things *seem* to have gone OK,
however each time I run java I get this:
Java HotSpot(TM) Client VM warning: Can't
Im embarassed to ask but the man's aren't making any sense to me.
I have a group of users that are all in the same group. They like to
share a common directory but find that they're files are rwxr-xr-x.
I'd like to make sure that every file within that directory has
rwxrwxr-x permissions as they
On Jun 29, 2005, at 1:53 PM, Chad Leigh -- Shire.Net LLC wrote:
It appears that the syslogger does a link (ln -s) from /var/run/log
to /dev/log and that inside a jail you cannot do this. However,
you can set it in the base system's version of the jail file
system. I don't know if it
On Jun 29, 2005, at 7:40 AM, Brian Candler wrote:
On Wednesday 29 June 2005 14:12, Muhammad Kashif Yaqoob wrote:
I am working on postfix Mailserver at freebsd.and install the
courier Imap
(courier-imap-4.0.2,1) and courier-authlib-0.55 in the system.and
also
Configuration the setting of
Whoa now. No need for us all to get snappy. Bottom line, what you posted
isn't much help, and without knowing anything about your system/setup, it's
very difficult to offer solutions.
First things first, are you sure that syslogd stops working after only 2
minutes? Syslogd only chews on the
On Jun 29, 2005, at 2:00 PM, motionsiren wrote:
Im embarassed to ask but the man's aren't making any sense to me.
I have a group of users that are all in the same group. They like to
share a common directory but find that they're files are rwxr-xr-x.
I'd like to make sure that every file within
Hello FreeBSD lovers,
In the current FreeBSD ports, squid-2.5STABLE10 has a patch that allows
it to run without dying even though it does not have access to
/dev/ipnat.
This access is important where squid is running in a transparent proxy
setup.
I am running several FreeBSD 5.x boxes with
Ever since running the update to the newest version of perl I've run
into difficulty with my amavis scanning. I think there are some p5*
packages that aren't properly recompiled to run with the latest
PERL...the logs are showing errors like
Clam Antivirus-clamd: Error reading from
On 6/25/05, Gregory Nou [EMAIL PROTECTED] wrote:
Hi !
I'm currently using a 6.0-current :
FreeBSD myhost 6.0-CURRENT FreeBSD 6.0-CURRENT #1: Thu Jun 9 00:12:03
CEST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERNEL i386
When making buildworld, I get this :
(makeinfo), uid0 :
Sorry! Didn't mean to be snappy, I thank you for your level head. Basically,
this is what is happening the syslog.conf file has the line for all.log to be
activated in the directory I chose, which is /usr/log. I know for certain that
if I stop and restart the syslogd daemon, it will start
Svein Halvor Halvorsen wrote:
* Alex Zbyslaw [2005-06-29 15:07 +0100]
Perhaps you could ask Microsoft to provide support in Windows for
accessing any kind of filesystem other than their own. ;-)
http://ffsdrv.sourceforge.net/
Will let you mount a ffs filesystem on Windows.
Not sure
On June 29, 2005 08:48 am, [EMAIL PROTECTED] wrote:
For one who wants to host email accounts for multiple domains, which is
better? I've started installing and configuring qmail according to the
tutorial on qmailrocks.org but i'm wondering if i should stop and consider
postfix before pressing
On June 29, 2005 08:50 am, bsd wrote:
Hello,
Does anyone know if there is a way to read mail with unix mail
program?
The standard mail command only reads mbox formatted mail stores.
I've been using this program since couple of years and I am quite
happy with It…
I can't seem to find a
http://www.teamquest.com/resources/gunther/ldavg1.shtml
http://www.teamquest.com/resources/gunther/ldavg2.shtml
On 6/21/05, Richard Lupton [EMAIL PROTECTED] wrote:
Hello,
Can anyone explain where the CPU usage values in top come from? When
my computer is busy, the CPU states row in the
Hi all,
I've just upgrade my old courier-imap ports with Mysql and Drac
modules support but avec success authentication from pop or imap,
dracd database isn't updated.
I've got no error from Courier-Imap nor Drac, it seems like
Courier-Imap doesn't call drac_update_tcpremoteip() function from
On Wed, Jun 29, 2005, Ean Kingston wrote:
On June 29, 2005 08:50 am, bsd wrote:
Hello,
Does anyone know if there is a way to read mail with unix mail
program?
The standard mail command only reads mbox formatted mail stores.
I've been using this program since couple of years and I am quite
Hello everybody,
I have 2 120 Go Drives installed on my FreeBSD 5.4 Box. I want to create
with these 2 disks a software RAID-1 solution. I wanted to use vinum but
lots of people say that vinum is very unstable on FreeBSD 5.4. So I am
asking you what is the best solution to make RAID-1 on FreeBSD
Am Mittwoch, 29. Juni 2005 16:32 schrieb Norbert Koch:
5.4 has the new uplcom driver which checks the revision maybe you
can apply
the cvs version to your 5.3 (guess).
-Harry
I tested this with RELENG_5 as of last week.
Hmm, then you have the new uplcom driver...
The device seems to
Am Mittwoch, 29. Juni 2005 21:28 schrieb ptitoliv:
Hello everybody,
I have 2 120 Go Drives installed on my FreeBSD 5.4 Box. I want to create
with these 2 disks a software RAID-1 solution. I wanted to use vinum but
lots of people say that vinum is very unstable on FreeBSD 5.4. So I am
I can't
On Wed, 29 Jun 2005 21:28:22 +0200
ptitoliv [EMAIL PROTECTED] wrote:
I have 2 120 Go Drives installed on my FreeBSD 5.4 Box. I want to create
with these 2 disks a software RAID-1 solution. I wanted to use vinum but
lots of people say that vinum is very unstable on FreeBSD 5.4. So I am
asking
First thing I would do I change the syslog.conf file and point the
the log to the correct location. /var/log/all.log See if that
makes any differance.
*.* /var/log/all.log
Then touch /var/log/all.log to allocate it and chmod 600
/var/log/all.log
Hi,
I'm currently running:
FreeBSD chimaera 6.0-CURRENT-SNAP004 FreeBSD 6.0-CURRENT-SNAP004 #0: Thu
Jun 2 06:12:51 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386
(although the problem existed on FreeBSD 5.4-RELEASE, also).
I use rxvt (rxvt-2.6.4_1) when in X, and I am unable
I have had a lot of sucess with ccd. Its pretty simple to configure.
Basically, you just add the kernel device. Label the disks, do a ccdconfig
ccd0 stripe size 0 /dev/drive #1 /dev/drive #2. Then newfs ccd0 and
mount it where you want it.
Casey
Hello everybody,
I have 2 120 Go Drives
Hello again,
Thank you for all your answers ! I am going to look at gmirror and ccd.
But I have a last question. My disks are differents. One is a Maxtor
detected with a 111 GB capacity and the other is a Seagate detected with
a 114 GB capacity. Will I have problems trying to use RAID with this
On Wed, Jun 29, 2005 at 10:49:46AM -0700, M. Goodell wrote:
I just installed /usr/ports/java/jdk14 and things *seem* to have gone OK,
however each time I run java I get this:
Java HotSpot(TM) Client VM warning: Can't detect initial thread stack
location
Is this a problem? If so, how
Hi,
Interesting reading.
BTW, with hyperthreading (or SMP) boxes the top command shows
another column that is not documented in the man page.
What does it mean the C column? I guess it´s the cpu actually
running the job, but why I can see something like this:
STATE C
First let's be sure that syslogd is not logging at all.
Try this:
$ sudo tail -n10 /var/log/messages
Enter your password
$ su
Enter anything (an incorrect password)
$ sudo tail -n10 /var/log/messages
If the somewhere in the last few lines of the messages log you see a message
that there was a
On Jun 29, 2005, at 1:29 PM, fbsd_user wrote:
First thing I would do I change the syslog.conf file and point the
the log to the correct location. /var/log/all.log
There is no correct location. Where the sysadmin wants it is the
correct location.
Chad
See if that
makes any
I am not sure how to go about this. If I do not want to touch the system
CRON, is it possible to create a personal CRON that could run two
programs, both at the super user level
Example:
I want to update the ports tree and then run portmanager to install the
updates. These obviously have to be
On 6/23/05, Csaba Henk [EMAIL PROTECTED] wrote:
Can it be that you have installed mod_python with thread support
enabled, but your python is w/o thread support?
I had mysterious errors with mod_python (the error messages had nothing
to do with threads) until I disabled threads both in python
On Wed, 29 Jun 2005, Gerard Seibert wrote:
I am not sure how to go about this. If I do not want to touch the system
CRON, is it possible to create a personal CRON that could run two
programs, both at the super user level
Example:
I want to update the ports tree and then run portmanager to
On Wednesday 29 June 2005 19:29, Alex Zbyslaw wrote:
...but frankly the very idea terrifies me. Let Winxp loose on my fbsd
partition?
shudders
Well, it's a sourceforge project, so it isn't by Microsoft.
If you're concerned about data integrity, then you could try:
1) Mount only one
Hello,
Just wondering if anyone could direct me to where wine configuration
is done by default under FreeBSD. I need to setup Wine, and I would like
to use a systemwide conf file (/etc/wine.conf in Linux) or the user
config file in ~/.wine/config. The issue is that I don't know what
Hi there,
I've browsing freshports.org for an arp scanner and found only
arpscan, which is marked broken and knowlan, which hasn't been updated
in years. What's the tool of choice to map out IP-Adresses on a subnet
when you know that quite a few hosts are firewalled from ping?
Thanks, Fabian
I am looking for a good HOWTO on configuring Tomcat + Apache2 - I have
successfully installed: jakarta-tomcat-5.0.30 mod_jk-apache2-1.2.6,1 - The
documentation I have been able to find on the web (apache.org / google / yahoo)
seems somewhat sparse.
Would I be better served to purchase a good
Ted Mittelstaedt wrote:
This is nothing more than a series of tcl scripts. And it contains
documentation of all the modules required, which are many. It should
be quite easy to go through the ports directories and install all of
the modules required, then unpack this and do a make install on
1 - 100 of 136 matches
Mail list logo
