I'm running FreeBSD 6.1-RC #0 with a generic kernel and an Asus A8V
motherboard. I have three IDE disks in my system. Two are on a 3ware
7200 RAID card in a RAID1 configuration. This is currently used to
boot.
The third disk is intended to be a DR disk, with a nightly script to
mount, sync,
I just moved my 6.0 Release from one slice to another. The procedure is
similar. You could look at my response to expanding a partition, same
idea. So relocating a copy of 6.0 (at least) works OK for booting.
What happens when you pull the raid card?
I'm guessing that bios is ignored pretty
On Sat, Apr 29, 2006 at 04:08:36AM -0400, Ian Jefferson wrote:
What happens when you pull the raid card?
Same thing.
Choice of boot manager?
Doesn't the -B option just install the standard boot manager?
Joe
___
freebsd-questions@freebsd.org
I am trying to upgrade to the cyrus-imapd 2.2.13 port. I have been
running 2.2.12 successfully for many months. This is on FreeBSD
4.11p16.
The build is failing as below. Does anyone have an idea if this is
fixable?
.
.
.
cc -L/usr/lib -R/usr/lib -L/usr/local/lib -R/usr/local/lib
Hi All,
I am trying to help a friend recover her Wind0ws harddisk. I have a backup of
all files on a UFS2 partition and I have a new and freshly
partitioned/formatted harddisk with a number of NTFS partitions. man
mount_ntfs mentions write support for ntfs partitions with some limitations,
jekillen wrote:
On Apr 28, 2006, at 5:38 PM, Gerard Seibert wrote:
jekillen wrote:
Hello:
I have had a problem with installing MySQL 5.0.18 on a FreeBSD v 6.0
installation
where everything seems to compile and install correctly but the server
crashes
immediately on start up
Ted,
Is that the same with FreeBSD 6.0-RELEASE?
Cheers,
Will
On 28/04/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
No, but you must make sure to turn OFF raid in the BIOS
settings or FreeBSD 6.1 will not recognize the drives.
Ted
-Original Message-
From: [EMAIL PROTECTED]
What is the status of reading/writing to Mac's file system (HFS) or is
it HFS+? Are they supported in FreeBSD 6.0? How about 6.1-RC? Can we
write to that file system or only read at moment? Is it safe? I'm trying
to find something in the /usr/src/sys/i386/conf/NOTES file but nothing
is promising
try using sysutils/ntfsprogs (as standalone utils set or via
sysutils/fusefs-(kmod|libs) if you have 6.0+). ntfs kernel module really
doesn't write anything, ntfsprogs also has limitations (man for details) but
they're better than nothing
--
Regards, Mirya
ICQ #313898202
Anyone have experience with ClamAV? Good, Bad, Ugly?
Should I use something else, or is the only good alternative
pay/expensive (such as avast)?
Am I better at leaving the antivirus stuff to the Windows machine
(which has McAfee Enterprise)?
Background:
System lags occasionally, and has crashed
I don't know about HFS, but you can format your mac drives with UFS when
you do a clean install of MacOS, at least then FreeBSD would be able to
read them.
Yousef Raffah wrote:
What is the status of reading/writing to Mac's file system (HFS) or is
it HFS+? Are they supported in FreeBSD 6.0?
On Saturday 29 April 2006 09:06, Jim Stapleton wrote:
Anyone have experience with ClamAV? Good, Bad, Ugly?
Should I use something else, or is the only good alternative
pay/expensive (such as avast)?
Am I better at leaving the antivirus stuff to the Windows machine
(which has McAfee
Jim Stapleton wrote:
Anyone have experience with ClamAV? Good, Bad, Ugly?
Should I use something else, or is the only good alternative
pay/expensive (such as avast)?
Am I better at leaving the antivirus stuff to the Windows machine
(which has McAfee Enterprise)?
Background:
System lags
Thanks.
I don't use the free AVG on windows: I get McAfee Enterprise for free
through my work.
And the AVG free won't let me turn off the email scanner, which has
~75%-90% crash rates on the machines I've tried it on, requiring me to
reboot before I can attempt to check my email again...
On
Clamav works well but can be slow scanning an entire system.
-Derek
At 08:06 AM 4/29/2006, Jim Stapleton wrote:
Anyone have experience with ClamAV? Good, Bad, Ugly?
Should I use something else, or is the only good alternative
pay/expensive (such as avast)?
Am I better at leaving the
Thanks everyone.
Virii would be the correct spelling we biologists use, but viruses is
standard in normal-people-speak, and gets the meaing across.
I doubt I need to scan my entire machine, just my /winbackup/
directory (about 10-15GB max)
Thanks again!
On Sat, 2006-04-29 at 09:11 -0400, John Cruz wrote:
I don't know about HFS, but you can format your mac drives with UFS when
you do a clean install of MacOS, at least then FreeBSD would be able to
read them.
You are right but this isn't my case here :(, I have an external HD
which has
a) You're not using the kernel.debug, and b) it's not a sensible
backtrace. Perhaps it's a side-effect of a) (i.e. you're not running
kgdb against the same kernel that panicked).
I compiled the kernel using config -g, then rebooted using that kernel. At
some point, the system crashes, the
Any one know of any thing that could be used to monitor a Smart Array
4200 Controller ?
This a COMPAQ PROLIANT DL380 to be precise .
Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
At 09:25 AM 4/29/2006, Jim Stapleton wrote:
Virii would be the correct spelling we biologists use, but viruses
is standard in normal-people-speak, and gets the meaing across.
Actually I was reading up on correct vs. common plurals after a
little debate around the office. It would appear the
Dang it!! Read the Fn HANDBOOK! This belongs under
[EMAIL PROTECTED] ! (yeah, I top-posted. But I edited.)
At 01:52 AM 4/29/2006, you wrote:
Security Update Notification
Dear Valued Customer :
As part of our security measures, we regularly screen activity in
the Bank of
Jim Stapleton wrote:
Anyone have experience with ClamAV? Good, Bad, Ugly?
Should I use something else, or is the only good alternative
pay/expensive (such as avast)?
Am I better at leaving the antivirus stuff to the Windows machine
(which has McAfee Enterprise)?
I've used it for a few years,
On Sat, 29 Apr 2006 10:27:15 -0400
[EMAIL PROTECTED] wrote:
Dang it!! Read the Fn HANDBOOK! This belongs under
[EMAIL PROTECTED] ! (yeah, I top-posted. But I edited.)
Report this to spamcop. That's what I did. Bitching about it on-list
is hardly productive, the FreeBSD postmaster
On 4/29/06, larafa sondes [EMAIL PROTECTED] wrote:
Hello,
I am trying to install kame/SHISA (kame snap:
kame-20060227-freebsd54-snap.tgz) on FreeBSD 5.4 in
order to use Mobile IPv6.
When building the kernel:
- make config performed well
- make got the following error:
ad0: FAILED - READ_DMA
Hi William,
No. Soren added a bunch of error checking code in the ata driver
for 6.1 to reject oddball cases and one of the things it does is ignore
the
disks on this particular server if the RAID functionality is turned
on in the BIOS. However, even though FreeBSD 6.0 sees the disks if the
The little green lights on the front of each disk drive will
change color if the disk dies.
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Terry
Sent: Saturday, April 29, 2006 7:11 AM
To: freebsd-questions@freebsd.org
Subject: Smart Array 4200
Forgive me if this has been addressed, as I'm setting up some FreeBsd
boxes after not having tinkered with things in a while.
I've set up a brand new FreeBsd 6 box, updated the ports and went to
install /usr/ports/www/apache22. This in turn triggered an install
of perm-5.8.8 which failed as
Hi Ted,
Thanks for the information regarding the Ethernet chipset, does the
same thing happen if you configure the interface via rc.conf/ifconfig
once the system is up and running?
If the ethernet chipset support at the moment is flakey then I might
have to look at a different vender, ethernet
Hi,
When the Apache 2.2 shows the forbidden pages and
others, It shows the version of apache, php, ssl, etc.
It's dangerous..
Please, how can I fix it ?
Thanks,
Aguiar
___
Abra sua conta no Yahoo! Mail: 1GB de espaço,
On Sat, Apr 29, 2006 at 10:12:02AM -0400, [EMAIL PROTECTED] wrote:
At 09:25 AM 4/29/2006, Jim Stapleton wrote:
Virii would be the correct spelling we biologists use, but viruses
is standard in normal-people-speak, and gets the meaing across.
Actually I was reading up on correct vs. common
take a look at the ServerTokens section of httpd.conf.
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal |
Aguiar Magalhaes wrote:
Hi,
When the Apache 2.2 shows the forbidden pages and
others, It shows the version of apache, php, ssl, etc.
It's dangerous..
Please, how can I fix it ?
Thanks,
Aguiar
Look for the ServerSignature directive in httpd.conf. Be sure and
restart Apache after
Jonathan Horne wrote:
take a look at the ServerTokens section of httpd.conf.
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS
no KDK, you were not incorrect. in fact, my answer should have included your
information, and your answer should have included mine (ie, we were both a
little short). the fact is, that both items should be considered when taming
down that particular info that apache displays.
ServerTokens
Is it possible to have a wifi card in hostap mode NOT to broadcast its
ssid (like most routers can)?
I have one in one of my hosts and this is not secure (as I understand).
Mimimal security would be not to broadcast and have wep on.
--
dick -- http://nagual.st/ -- PGP/GnuPG key: F86289CE
++
On Apr 29, 2006, at 4:21 AM, Gerard Seibert wrote:
jekillen wrote:
On Apr 28, 2006, at 5:38 PM, Gerard Seibert wrote:
jekillen wrote:
Hello:
I have had a problem with installing MySQL 5.0.18 on a FreeBSD v 6.0
installation
where everything seems to compile and install correctly but the
Hi,
Good thing to have in your pocket:
http://trinityhome.org/trk/
Regards,
Maris Stegenburgs
On Sat, 29 Apr 2006 12:08:09 +0200
Daan Vreeken [PA4DAN] [EMAIL PROTECTED] wrote:
Hi All,
I am trying to help a friend recover her Wind0ws harddisk. I have a backup of
all files on a UFS2
My bad an out of date ports-base was to blame...
Marc
At 09:41 AM 04/29/2006, Marc Hunter wrote:
Forgive me if this has been addressed, as I'm setting up some
FreeBsd boxes after not having tinkered with things in a while.
I've set up a brand new FreeBsd 6 box, updated the ports and
Okay, I finally configured the kernel properly. Here is the backtrace from the
dump. I could use some help deciphering and perhaps some help with things I can
look for that caused this dump.
Thanks,
Steve
(kgdb) backtrace
#0 doadump () at pcpu.h:159
#1 0xc0451f5e in db_fncall (dummy1=0,
Daan Vreeken [PA4DAN] wrote:
Hi All,
I am trying to help a friend recover her Wind0ws harddisk. I have a backup of
all files on a UFS2 partition and I have a new and freshly
partitioned/formatted harddisk with a number of NTFS partitions. man
mount_ntfs mentions write support for ntfs
Jim Stapleton wrote:
Anyone have experience with ClamAV? Good, Bad, Ugly?
Should I use something else, or is the only good alternative
pay/expensive (such as avast)?
Am I better at leaving the antivirus stuff to the Windows machine
(which has McAfee Enterprise)?
Background:
System lags
I'm not really here for windows advice, Just FreeBSD. I'm happy with
my windows AV solution as it is, as I've had too many issues with many
other solutions... And I have verified that it was hardware that was
the problem, not a virus, makes sense, it would be my first virus if
it were a virus
No, what happens if you configure it via rc.conf is the server
stays up for about a minute then panics, rather than panicing
immediately.
Perhaps if you e-mailed the bge maintainer and referenced the
PRs on the Ethernet, they might be willing to fix the driver.
Otherwise I'm going to look at it
jekillen wrote:
On Apr 28, 2006, at 6:10 PM, Duane Whitty wrote:
jekillen wrote:
On Apr 28, 2006, at 5:38 PM, Gerard Seibert wrote:
jekillen wrote:
Hello:
I have had a problem with installing MySQL 5.0.18 on a FreeBSD v 6.0
installation
where everything seems to compile and install
On Sat, Apr 29, 2006 at 03:17:14PM -0400, Steve Douville wrote:
Okay, I finally configured the kernel properly. Here is the backtrace from
the dump. I could use some help deciphering and perhaps some help with things
I can look for that caused this dump.
#8 0xc067ce2a in calltrap () at
Hello,
I've changed my hardware lately and cannot find the driver for sound
card. My motherboard is an Intel D955XBK with on board Sigmatel 9221
audio. On Windows it plays, so, the hardware part is fine.
Also cannot find the driver for my new video card: PCI Express x16
ASUS ATI RADEON X550 GE.
jekillen wrote:
On Apr 29, 2006, at 4:21 AM, Gerard Seibert wrote:
jekillen wrote:
On Apr 28, 2006, at 5:38 PM, Gerard Seibert wrote:
jekillen wrote:
Hello:
I have had a problem with installing MySQL 5.0.18 on a FreeBSD v 6.0
installation
where everything seems to
Duane Whitty wrote:
[snip]
Read the chapters in the MySQL manual regarding post-install
tasks under UNIX and securing the initial MySQL accounts.
Hope this helps,
Duane Whitty
http://dev.mysql.com/doc/refman/5.0/en/index.html
___
On 4/28/06, Gayn Winters [EMAIL PROTECTED] wrote:
The consensus of the group is that FreeBSD should run fine on an Intel
Mac. I'm interested in the time lag between the availability of drivers
on an Intel Mac and on FreeBSD.
Question1: If there is a driver for a device that works on an Intel
dick hoogendijk [EMAIL PROTECTED] wrote:
Is it possible to have a wifi card in hostap mode NOT to broadcast its
ssid (like most routers can)?
I have one in one of my hosts and this is not secure (as I understand).
Mimimal security would be not to broadcast and have wep on.
man ifconfig:
On Apr 29, 2006, at 5:02 PM, Andrew Pantyukhin wrote:
Question1: If there is a driver for a device that works on an
Intel Mac
(under OS X), will that driver work under FreeBSD? For example,
suppose
a very new Intel Mac has a new disk controller, is there some
process by
which we can
On 4/29/06, Yousef Raffah [EMAIL PROTECTED] wrote:
On Sat, 2006-04-29 at 09:11 -0400, John Cruz wrote:
I don't know about HFS, but you can format your mac drives with UFS when
you do a clean install of MacOS, at least then FreeBSD would be able to
read them.
You are right but this isn't my
From: John Nielsen [EMAIL PROTECTED]
On Saturday 29 April 2006 09:06, Jim Stapleton wrote:
Anyone have experience with ClamAV? Good, Bad, Ugly?
Should I use something else, or is the only good alternative
pay/expensive (such as avast)?
Am I better at leaving the antivirus stuff to the Windows
From: Gerard Seibert [EMAIL PROTECTED]
Jim Stapleton wrote:
Anyone have experience with ClamAV? Good, Bad, Ugly?
Should I use something else, or is the only good alternative
pay/expensive (such as avast)?
Am I better at leaving the antivirus stuff to the Windows machine
(which has McAfee
Hmmm
I'm probably making obvious suggestions but... I think I'd be
inclined to do a fresh install of the same OS version on the target
disk. See if that boots OK.
If it does then something in your mirror tools is the issue.
If it doesn't then it's a bootstrap problem.
Re: boot manager
'k, I have to be doing something wrong here ...
Up until recently, I've been using the regular Python Bittorrent port for
doing my torrents, getting *peaks* of 140+kps ... in order to make use of
some features in Azureas (mainly, its plugins for RSS Feeds), I'm trying
to get that running,
On Apr 29, 2006, at 2:07 PM, Gerard Seibert wrote:
jekillen wrote:
On Apr 29, 2006, at 4:21 AM, Gerard Seibert wrote:
jekillen wrote:
On Apr 28, 2006, at 5:38 PM, Gerard Seibert wrote:
jekillen wrote:
Hello:
I have had a problem with installing MySQL 5.0.18 on a FreeBSD v
6.0
my OS version is FreeBSD6.0 p7
my palm is m125
I've installed jpilot,coldsync... from ports.
However,jpilot said cannot find the device /dev/pilot
I have not compiled the kernel with ucom and uvisor.
So I loaded them by 'kldload'.
then put the following lines under 'usbd.conf'.
device Palm
Terry wrote:
Any one know of any thing that could be used to monitor a Smart Array
4200 Controller ?
This a COMPAQ PROLIANT DL380 to be precise .
Not sure if the 4200 uses ida or ciss, this is what I use for ida:
http://lists.freebsd.org/pipermail/freebsd-scsi/2005-September/002024.html
The
Giorgos Keramidas wrote:
On 2006-04-28 05:07, Duane Whitty [EMAIL PROTECTED] wrote:
Duane Whitty wrote:
Duane Whitty wrote:
I'm adding LDAP support to my Sendmail configuration. I couldn't seem
to find the appropriate m4 file in which to declare my APPENDDEF
statements. My
60 matches
Mail list logo
