Olivier Nicole wrote:
Hi,
We are considering to set-up a mirror for FreeBSD in Thailand, how
much disk space should we target for a full irror?
Best regards,
Olivier
___
freebsd-questions@freebsd.org mailing list
Hello. I tried various ways to stop the laptop screen from being
shutting down, as I use this screen to watch debug message of an
application I am working on, I need monitor always on, no screensaver,
no blank, no dpms etc.
I cannot do it. I have tried:
1. set blanktime to NO in /etc/rc.conf
On 1/23/07, Zhang Weiwu [EMAIL PROTECTED] wrote:
Hello. I tried various ways to stop the laptop screen from being
shutting down, as I use this screen to watch debug message of an
application I am working on, I need monitor always on, no screensaver,
no blank, no dpms etc.
I cannot do it. I have
Hello there,
i have a problem configuring dri support for my laptop (a celeron 1.5Ghz,
with i915GM GMCH chipset and 768Mb memory).Does anyone knows firstly if there
is a support for this chipset?If so, can you please check the glxinfo and dmesg
and tell me what's wrong?
Thanks for the
Sorry about the previous message, it was send in error.
After upgrading from 6.2-PRERELEASE to 6.2-STABLE all my servers are
terribly slow, the webservers use only 300Mb memory instead of the
previous 1500Mb. Anything changed between those releases which affects the
memory usage?
FreeBSD
Vidicoms MoBillCash the only billing platform for mobiles
The mobile payment mechanism MoBillCash created by Vidicom has been taken to
another level and released as an easy to setup drag and drop billing mechanism
for webmasters of all abilities.
Anyone can now sign up for MoBillCash at
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Monday, January 22, 2007 12:24 AM
Subject: Re: FreeBSD challenged by Internet
What I don't get is I see guys walking in
dropping $1000 on associated Mac hardware crap
...
On Mon, 22 Jan 2007 17:48:04 +0300, Oleg Palukhin
[EMAIL PROTECTED] wrote:
On Mon, 22 Jan 2007 16:55:56 +0300, Garrett Cooper
[EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Oleg Palukhin wrote:
`make buildworld` fails with this error:
Hello list,
I tried to enable the nice composite features of KDE on my workstation.
It seems they work, but very slow. The KERNEL contains device
agp, /boot/loader.conf contains sis_load=YES and that are some
interesting outputs:
dmesg | grep drm outputs:
drm0: SiS 630 port 0xa000-0xa07f mem
On Tue, 23 Jan 2007 02:18 am, ann kok wrote:
Hi
I am trying to test the clone harddrive to boot up the
system. I got an error
init: can't exec getty '/usr/libexec/getty' for port
/dev/tty..
but I check the clone harddive. the file is there
/usr/libexec/getty and /dev/tty.
i am using
Sorry to bring up an old thread but if others catalog this list for
searching later like I do then at least they will have this updated
information.
As suggested by Ted, I went out and looked for a webcam port and the
cams supported by that port.
PWCBSD
- the author states that it should work
Re: freebsd-questions Digest, Vol 162, Issue 5
Message: 3
Date: Tue, 23 Jan 2007 16:47:02 +0800
From: Zhang Weiwu [EMAIL PROTECTED]
Hello. I tried various ways to stop the laptop screen from being
shutting down, as I use this screen to watch debug message of an
application I am
i have a problem configuring dri support for my laptop (a celeron
1.5Ghz, with i915GM GMCH chipset and 768Mb memory).Does anyone knows
firstly if there is a support for this chipset?If so, can you please
check the glxinfo and dmesg and tell me what's wrong?
Thanks for the time.
I
Stevan Tiefert [EMAIL PROTECTED] wrote:
(II) SIS(0): [drm] drmSetBusid failed (6, pci::01:00.0), Permission
denied
Driver says 'Permission denied'. Try to add the following to your
xorg.conf:
'
Section DRI
Mode 0666
EndSection
'
as written in
Am Dienstag, 23. Januar 2007 14:32 schrieb [EMAIL PROTECTED]:
Stevan Tiefert [EMAIL PROTECTED] wrote:
(II) SIS(0): [drm] drmSetBusid failed (6, pci::01:00.0),
Permission denied
Driver says 'Permission denied'. Try to add the following to your
xorg.conf:
'
Section DRI
Mode 0666
i just set up my first gmirror raid1, and... it was really simple.
too
simple. ok... what did i skip or do wrong?, was my first thought.
i follow the doc from onlamp.com:
http://www.onlamp.com/pub/a/bsd/2005/11/10/FreeBSD_Basics.html?page=1
i did have one giant deviation tho, and im
From http://dri.freedesktop.org/wiki/DriTroubleshooting:
'If it says:
[drm] drmSetBusid failed (7, PCI:1:0:0), Permission denied
people have said that it's because the modules were built with a different
gcc version than the kernel. Make sure they are in sync. Also, dmesg
output should show
Am Dienstag, 23. Januar 2007 15:28 schrieb [EMAIL PROTECTED]:
From http://dri.freedesktop.org/wiki/DriTroubleshooting:
'If it says:
[drm] drmSetBusid failed (7, PCI:1:0:0), Permission denied
people have said that it's because the modules were built with a
different gcc version than the
Hey guys,
I've downloaded multiple copies (from different FTP servers),
6.2-RELEASE-ia64 and it seems like this particular image doesn't want to
boot up in my system. The i386 and amd64 distro's bootup just fine, but
obviously don't work because system architecture is 64bit Intel. I'm out of
My guess would be bad ram. I would do a memory test or swap the ram
out, see if the error happens again.
Jay Chandler wrote:
One of our servers is restarting at random. Not entirely sure what
causes it-- hopefully someone here can help me track it down (I
suspect hardware at some point,
That is, I have a router connecting to the internet through PPP. There are 4
computers (and a DSL modem) connected to the router. The router does not limit
or share internet speed evenly, so if I download via TCP at full speed, others
complain about slow loading web pages. My comp has a FreeBSD
On Tue, Jan 23, 2007 at 01:35:06AM -0600, Damian Wiest wrote:
On Mon, Jan 22, 2007 at 07:16:59PM -0600, Damian Wiest wrote:
[snip]
Real hardware RAID chips/cards tend to be expensive,
proprietary, don't require an OS driver and include a battery backup
system for data in the RAID
On Mon, Jan 22, 2007 at 07:16:59PM -0600, Damian Wiest wrote:
On Tue, Jan 16, 2007 at 11:33:47AM -0700, Steve Franks wrote:
I'm tired of win2k crashing, and we won't even go into my opinion of vista's
strongarm marketing tactics (read: changing my hardware means I have to pay
again? they
On 1/23/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
That is, I have a router connecting to the internet through PPP. There are 4
computers (and a DSL modem) connected to the router. The router does not limit
or share internet speed evenly, so if I download via TCP at full speed, others
Morning everyone :)
I was curious if anyone could reccomend the best supported/stable HBA cards
available. I've poked around a bit and found that there is support for the
Qlogic cards using isp(4), but that dosen't seem to cover most (if not all)
of their newer cards. Anyone have a
Hi,
I'm trying to get a WLAN pcmcia card working on freebsd 6.2. Kernel with
cardbus support compiled fine, but when the card is inserted, i get:
Status is 0x3086
Status is 0x3820
cbb0: card inserted: event=0x, state=3820
cbb0: cbb_power: 3V
cbb0: cbb_power: 0V
Dmesg
Hi,
I'm trying to get a WLAN pcmcia card working on freebsd 6.2. Kernel with
cardbus support compiled fine, but when the card is inserted, i get:
Status is 0x3086
Status is 0x3820
cbb0: card inserted: event=0x, state=3820
cbb0: cbb_power: 3V
cbb0: cbb_power: 0V
Dmesg
Hi
Just a general question:
should all values in rc.conf be in quotes... like:
network_enable=rl0
Thanks
Eoghan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
On 1/23/07, eoghan [EMAIL PROTECTED] wrote:
Hi
Just a general question:
should all values in rc.conf be in quotes... like:
network_enable=rl0
rc.conf is just a bourne shell script, so all sh(1)
rules apply (no one really knows _all_ the rules,
though).
On Tuesday 23 January 2007 14:52, VH-Brody wrote:
Hey guys,
I've downloaded multiple copies (from different FTP servers),
6.2-RELEASE-ia64 and it seems like this particular image doesn't want to
boot up in my system. The i386 and amd64 distro's bootup just fine, but
obviously don't work
In man rc.conf everything is written with double quotes
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Mon, Jan 22, 2007 at 07:16:59PM -0600, Damian Wiest wrote:
Forging ahead, I get ready to start playing the mounting game, but
lo-and-behold, suddenly I have 4 disks whereas in windows I had two. Now I
praise FreeBSD for it's superior intellect here, but now I have a problem.
I want two
[EMAIL PROTECTED] wrote:
i have a problem configuring dri support for my laptop (a celeron
1.5Ghz, with i915GM GMCH chipset and 768Mb memory). Does anyone knows
firstly if there is a support for this chipset? If so, can you please
check the glxinfo and dmesg and tell me what's wrong?
I
On Tuesday 23 January 2007 17:09, Your Name wrote:
amd64 i386 won't install with this system, what I was trying to
explain is that the system hardware works just fine- its the fact that
the 6.2-RELEASE ia64 refuses to boot off of CD..
I've never had this problem with FBSD before, I also
felix.schalck wrote:
Hi,
I'm trying to get a WLAN pcmcia card working on freebsd 6.2. Kernel with
cardbus support compiled fine, but when the card is inserted, i get:
Status is 0x3086
Status is 0x3820
cbb0: card inserted: event=0x, state=3820
cbb0: cbb_power: 3V
cbb0:
dmesg gives me:
atapci1: AcerLabs M5287 SATA150 controller port
0xec00-0xec0f,0xe880-0xe887,0xe800-0xe80f,0xe480-0xe487,0xe400-0xe41f
mem 0xd800-0xdbff irq 21 at device 31.1 on pci0
Two pairs of drives are identical in terms of partitions, and no ar0
devices found, So I'd guess I have
Does anyone have experience using an ath(4) card as a host access
point on a sparc64 machine? Does it work? I'm just asking before I
waste time installing, configuring, etc.
Thanks,
Eric
___
freebsd-questions@freebsd.org mailing list
VH-Brody [EMAIL PROTECTED] wrote:
I've downloaded multiple copies (from different FTP servers),
6.2-RELEASE-ia64 and it seems like this particular image doesn't want to
boot up in my system. The i386 and amd64 distro's bootup just fine, but
obviously don't work because system architecture
On Tue, Jan 23, 2007 at 04:22:44PM +, eoghan wrote:
Hi
Just a general question:
should all values in rc.conf be in quotes... like:
network_enable=rl0
It is a good idea. I think, if there is no white space in the value,
then you can get away without it, but maybe I have my shells
On 23 Jan 2007, at 18:26, Jerry McAllister wrote:
Hi
Just a general question:
should all values in rc.conf be in quotes... like:
network_enable=rl0
It is a good idea. I think, if there is no white space in the value,
then you can get away without it, but maybe I have my shells confused
in
Hi everyone. I'm trying to build a new machine to replace my existing
workstation.
So far with all the motherboard research I've been doing, most of the
available boards that have the configurations I need use nForce5
chipsets (such as 570 or 590). I've searched around and have seen that
nForce5
Hopefully answering one of my own questions will save someone else
some time.
If there is enough KVA now, what kept more PV entries from being
allocated when needed? Used plus free PV entries has been stuck
at 2520365 for days.
The PV ENTRY limit shown with sysctl vm is off by
I have a notebook that has a USB2 controller. In windows I can get a
14MB/s data transfer rate in Windows (write) to my USB drive. However
in BSD, I only get a 630KB/s transfer rate. Whats the best way to
ascertain *why* I'm getting this slow performance? I'm not sure which
diagnostic steps to
Hello All,
I'm trying to install FreeBSD on a system consisting of an Ampro Littleboard
486 with 32 Mb ram, a built-in Adaptec 6360 SCSI controller, an 18.2 Gb
Quantum Atlas III SCSI drive (50 pin narrow), a 256 Mb IDE flash drive
containing MS-DOS, and an IDE CD drive. I want FreeBSD to
On Tuesday 23 January 2007 15:32, John D. Reeve wrote:
I'm trying to install FreeBSD on a system consisting of an Ampro
Littleboard 486 with 32 Mb ram, a built-in Adaptec 6360 SCSI controller, an
18.2 Gb Quantum Atlas III SCSI drive (50 pin narrow), a 256 Mb IDE flash
drive containing MS-DOS,
On Tue, Jan 23, 2007 at 09:24:59AM -0600, Reuben A. Popp wrote:
Morning everyone :)
I was curious if anyone could reccomend the best supported/stable HBA cards
available. I've poked around a bit and found that there is support for the
Qlogic cards using isp(4), but that dosen't seem to
I've gotten a few replies and i've tried almost all of the suggestions
but the problem still resides. I re-installed rsync on both box's and it
still does this.
Peter Pluta wrote:
Anyone?
Peter Pluta wrote:
I have a win2k3 server running as my rsync server. I also have a
freebsd web server
Hi,
I've gotten a few replies and i've tried almost all of the suggestions
but the problem still resides. I re-installed rsync on both box's and it
still does this.
Most likely won't help, but do you have any sort of traffic shaping
between the two boxes (not sure if they are on the same LAN
just to go through what i'd normally check:
1) make sure the source host is up at 100full
2) make sure the port the source host is plugged into is 100full
3) make sure the destination host is up at 100full
4) make sure the port the destination host is plugged into is 100full
given all of that,
You can play with your BIOS settings. In the last part of the installer it
will give a list of found drives. You should be using a generic kernel for
the install.
However in all this, with only 32 MB RAM, it seems a bit pointless. You
would do better spending a few dollars for a more
Gilbert Cao wrote:
On Thu, Jan 18, 2007 at 12:36:04AM +, Vince Hoffman wrote:
I hate to say this but this driver only seems to compile on -CURRENT as
far as i can tell (and as far as the conversation at
Any help will be Greatly appreciated! I currently believe this is a
problem with the snd_t4dwave driver device
Please respond directly as well as to the list. Thanks!
http://www.bsdforums.org/forums/showthread.php?t=45514 [HISTORY]
http://www.bsdforums.org/forums/showthread.php?p=242514
Ok guys,
I got the amd64 cd booted, it goes through the CD Loader, and the splash
screen comes up (I hit enter, selecting the default).
It runs through all the stuff, and the last thing I caught on the screen was
VGA ISA something, then the system reboots. Does this everytime. Any ideas?
I know this is a Unix shell command, and off-topic, but I'm curious. I've been reading a few 'make'
commands at work that end in | and I was wondering if that redirection string is
synonymous to | /dev/stdout.
Thanks,
-Garrett
___
On Tue, 23 Jan 2007, eoghan wrote:
On 23 Jan 2007, at 18:26, Jerry McAllister wrote:
Hi
Just a general question:
should all values in rc.conf be in quotes... like:
network_enable=rl0
It is a good idea. I think, if there is no white space in the value,
then you can get away without it,
Ok, so I disconnected to two Raptor drives in the system, and now the system
does not reboot, rather it sits at this error: Fatal trap 12Cannot dump.
No dump defined.
I researched it and found to disable PNP in the BIOS...i'm off to try that.
Anything else I should look for?
-Original
Guys,
Dunno how dumb this question is to ask, but given the breadth
of knowledge on this list, this is the place; esp'ly since my
question involves web-crawlers. Or spiders[?]
So I'm thinking of setting loose my own crawler to search. Are
On Jan 23, 2007, at 5:00 PM, [EMAIL PROTECTED] wrote:
I know this is a Unix shell command, and off-topic, but I'm
curious. I've been reading a few 'make' commands at work that end
in | and I was wondering if that redirection string is
synonymous to | /dev/stdout.
In csh/tcsh shells, that
[EMAIL PROTECTED] writes:
I know this is a Unix shell command, and off-topic, but I'm
curious. I've been reading a few 'make' commands at work that end
in | and I was wondering if that redirection string is
synonymous to | /dev/stdout.
That's (t)csh-speak for send both stdout
From: Garrett Cooper [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Sent: Monday, January 22, 2007 10:42:15 PM
Subject: Re: trouble mounting Olympus WS-310M voice recorder
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
ajm wrote:
On Mon, Jan 22, 2007 at 12:27:10AM +0100, Tore Lund
On Tue, 23 Jan 2007, Andrew Gould wrote:
From: Garrett Cooper [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Sent: Monday, January 22, 2007 10:42:15 PM
Subject: Re: trouble mounting Olympus WS-310M voice recorder
Interestingly enough I tried out these steps as root to see if I could
On Tue, 23 Jan 2007, Robert Huff wrote:
[EMAIL PROTECTED] writes:
I know this is a Unix shell command, and off-topic, but I'm
curious. I've been reading a few 'make' commands at work that end
in | and I was wondering if that redirection string is
synonymous to | /dev/stdout.
In the last episode (Jan 23), [EMAIL PROTECTED] said:
On Tue, 23 Jan 2007, Robert Huff wrote:
[EMAIL PROTECTED] writes:
I know this is a Unix shell command, and off-topic, but I'm
curious. I've been reading a few 'make' commands at work that end
in | and I was wondering if that redirection
cd /dev; ls -l xpt* pass* da0 says?
You do need pass and da compiled into the kernel with the right permissions
in order to
make stuff work with cameras AFAIK.
-Garrett
Here's the output:
# ls -l xpt* pass* da0
crw-r- 1 root operator0, 139 Jan 23 22:05 da0
crw--- 1 root
On Mon, Jan 22, 2007 at 11:16:54PM -0800, Garrett Cooper wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
ajm wrote:
On Mon, Jan 22, 2007 at 08:42:15PM -0800, Garrett Cooper wrote:
ajm wrote:
On Mon, Jan 22, 2007 at 12:27:10AM +0100, Tore Lund wrote:
Andrew Gould wrote:
[snip]
Thanks a lot for shed me a light :-)
---
EPedas Sdn. Bhd. (http://www.epedas.com.my)
(wholly owned subsidiary of Safeguards Corporation Bhd.)
-+-+-+-+-+-+-+
DISCLAIMER
-+-+-+-+-+-+-+
This message is intended only for the ordinary use by the person to
whom it is addressed and may contain
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
ajm wrote:
On Mon, Jan 22, 2007 at 11:16:54PM -0800, Garrett Cooper wrote:
ajm wrote:
On Mon, Jan 22, 2007 at 08:42:15PM -0800, Garrett Cooper wrote:
ajm wrote:
On Mon, Jan 22, 2007 at 12:27:10AM +0100, Tore Lund wrote:
Andrew Gould wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andrew Gould wrote:
cd /dev; ls -l xpt* pass* da0 says?
You do need pass and da compiled into the kernel with the right permissions
in order to
make stuff work with cameras AFAIK.
-Garrett
Here's the output:
# ls -l xpt* pass* da0
Hi Felix,
On 23/01/07, felix.schalck [EMAIL PROTECTED] wrote:
Hi,
I'm trying to get a WLAN pcmcia card working on freebsd 6.2. Kernel with
cardbus support compiled fine, but when the card is inserted, i get:
Status is 0x3086
Status is 0x3820
cbb0: card inserted: event=0x,
On 1/20/07, Colin Percival [EMAIL PROTECTED] wrote:
Amarendra Godbole wrote:
Fetching metadata index... done.
Fetching 1 metadata patches. done.
Applying metadata patches... done.
Fetching 1 metadata files... failed.
Is this because of a connectivity issue on my end, or some issue with
70 matches
Mail list logo
