Hi there,
Need a word of advice. I use dump to backup my data. All fine. Dump
saves compressed *.bz2 files. Nice. All I need now is a way to copy them
from the server to a remote backup machine. The problem I am facing is
that bz2 files are owned by root:wheel. So if I use scp
[EMAIL
On Mon, May 19, 2008 at 08:45:41AM -0700, Yani Brankov wrote:
I recently updated to FreeBSD 7 and noticed that my box started to perform
as windows does under heavier loads. The mouse starts to be jerky when
compiling, window updates/redraws are slow and bump the CPU usage up to
100%. I
Does anyone know of anyone make an enterprise level router based off of FreeBSD?
define what enterprise level router is
- --
Marc G. FournierHub.Org Hosting Solutions S.A. (http://www.hub.org)
Email . [EMAIL PROTECTED] MSN . [EMAIL PROTECTED]
Yahoo .
Hi,
you may use ipf to drop packets from the attacking host I suppose. Or even
limit the packets to the specified port.
Regards,
Ivailo Tanusheff
Kalpin Erlangga Silaen [EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
28.05.2008 05:01
To
freebsd-questions@freebsd.org
Dear Ivailo,
thank you for your response. I am using ipfw to limit all packets for
all open port in my server. But the packet size was 600 Mbps which could
not filtered by our ISP.
Ivailo Tanusheff wrote:
Hi,
you may use ipf to drop packets from the attacking host I suppose. Or even
limit
On Wed, May 28, 2008 at 9:53 AM, Zbigniew Szalbot [EMAIL PROTECTED]
wrote:
Hi there,
Need a word of advice. I use dump to backup my data. All fine. Dump saves
compressed *.bz2 files. Nice. All I need now is a way to copy them from the
server to a remote backup machine. The problem I am
Wojciech Puchar wrote:
Does anyone know of anyone make an enterprise level router based off
of FreeBSD?
define what enterprise level router is
Something that doesn't say 'Vista capable' on the box?
:)
Steve
___
freebsd-questions@freebsd.org
FreeBSD?
define what enterprise level router is
Something that doesn't say 'Vista capable' on the box?
so get 486, 16MB RAM, needed amount of network cards, install FreeBSD and
configure :)
(pentium may be needed for full 100Mb/s capability)
Bob McConnell writes:
define what enterprise level router is
Something that doesn't say 'Vista capable' on the box?
so get 486, 16MB RAM, needed amount of network cards, install FreeBSD
and
configure :)
(pentium may be needed for full 100Mb/s capability)
Finding
From: Robert Huff
Bob McConnell writes:
define what enterprise level router is
Something that doesn't say 'Vista capable' on the box?
so get 486, 16MB RAM, needed amount of network cards, install
FreeBSD
and
configure :)
(pentium may be needed for full 100Mb/s
On Wed, May 28, 2008 at 09:51:35AM -0400, Bob McConnell wrote:
From: Robert Huff
Bob McConnell writes:
define what enterprise level router is
Something that doesn't say 'Vista capable' on the box?
so get 486, 16MB RAM, needed amount of network cards, install
FreeBSD
Wojciech Puchar
define what enterprise level router is
Something that doesn't say 'Vista capable' on the box?
so get 486, 16MB RAM, needed amount of network cards, install FreeBSD
and
configure :)
(pentium may be needed for full 100Mb/s capability)
Finding a box with that enough PCI
Kalpin Erlangga Silaen wrote:
yesterday, our shell server was attack and server immeditiately reboot.
I checked logs, it likes UDP flood with destination port 53. Is there
any way how to survive from this kind attack?
(i)
Do a grep 53 /etc/services and search for ports 53 on both tcp and udp.
My organisation has successfully used FreeBSD to set up a VPN between
three sites.
Now, in order to facilitate a phone system using VOIP between two of
those sites, I have
attempted to enable multi-cast routing between those sites.
I looked at the mrouted manual, and attempted to configure
Hi,
What I wanted to say was to use pf, not ipf. You may use something like
this:
table sshspammer persist
block log quick from sshspammer
# sshspammer
# more than 6 ssh attempts in 15 seconds will be blocked ;)
pass in quick on $ext_if proto tcp to ($ext_if) port ssh keep state
(max-src-conn
From: Jerry B. Altzman
On Wed, May 28, 2008 at 10:08 AM, Erik Trulsson
[EMAIL PROTECTED] wrote:
(Putting a total of 6 quad-port NICs on a single PCI-bus would
totally swamp
that bus though, so if one were to actually use so many NICs I would
rather
recommend e.g. the Asus P5BP-E/4L
On Wed, May 28, 2008 at 10:31:24AM -0400, Jerry B. Altzman wrote:
On Wed, May 28, 2008 at 10:08 AM, Erik Trulsson [EMAIL PROTECTED] wrote:
(Putting a total of 6 quad-port NICs on a single PCI-bus would totally swamp
that bus though, so if one were to actually use so many NICs I would rather
On Wed, May 28, 2008 at 10:08 AM, Erik Trulsson [EMAIL PROTECTED] wrote:
(Putting a total of 6 quad-port NICs on a single PCI-bus would totally swamp
that bus though, so if one were to actually use so many NICs I would rather
recommend e.g. the Asus P5BP-E/4L motherboard. It has 3 PCI slots and
On Wed, May 28, 2008 at 10:48 AM, Erik Trulsson [EMAIL PROTECTED] wrote:
On Wed, May 28, 2008 at 10:31:24AM -0400, Jerry B. Altzman wrote:
And all this just to *pass packets*; if you're making real *routing*
decisions based upon that (i.e. you're making a router rather than a
switch), which
Dear ladies and gentlemen please allow me to introduce myself. My name is
Fatan Kercagu and I am at first year of my studies at the Economic Faculty
here at Prishtina University. I am unable to continue my studies because of
financial reasons therefore I would ask you hereby for your possible
Bob McConnell wrote:
I don't need that many Ethernet ports, but I do need most of those PCI
slots. I was unable to locate a box with more than four slots and a
warranty that was acceptable to our Production group. I'm still not sure
about the warranty or that we can buy it in a case with power
I think the size and the fact that his ISP could not filter this
indicates that the problem cannot be solved locally. You can do all
the blocking on your end you want, but they can (and did) still
saturate links ahead of you.
Your ISP (or even their uplink, I'm guessing your ISP was also pretty
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Giorgos
Keramidas
Sent: Tuesday, May 27, 2008 7:38 PM
To: Matthew Donovan
Cc: Marc G. Fournier; freebsd-questions@freebsd.org
Subject: Re: FreeBSD based router ...
On Tue, 27 May 2008 22:28:35
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jerry B.
Altzman
Sent: Wednesday, May 28, 2008 7:31 AM
To: Erik Trulsson
Cc: Bob McConnell; freebsd-questions@freebsd.org
Subject: Re: FreeBSD based router ...
On Wed, May 28, 2008 at 10:08 AM,
(pentium may be needed for full 100Mb/s capability)
Finding a box with that enough PCI slots might be problematic.
not true. 5 PCI slots isn't uncommon+ISA slots. ISA slot is OK for video
card (easy to find in scraps ;).
___
Finding a box with that enough PCI slots might be problematic.
Six slots X quad-port network cards = 24 interfaces.
If you need more than that, it's probably worth investing in
specialized hard-/software.
Robert Huff
Where did you find a
And all this just to *pass packets*; if you're making real *routing*
decisions based upon that (i.e. you're making a router rather than a
switch), which requires that packets take a trip to the CPU, you'll
packet headers
find yourself coming to the realization that Cisco and Juniper might
These guys have a 2 or 4 port nic for $100:
http://www.soekris.com/lan16x1.htm
Try Ebay for the Adaptec ANA-6944-TX. It's a 4 port based on the old DEC
chipset (de driver) Usual can be had for = $10.
but prepare for problems connecting this with other devices. usually works
well with
They are very expensive.
A Juniper is not based on FreeBSD. It uses FreeBSD as the
control interface. The actual routing happens in specialized
ASICS that Juniper custom-builds.
good for multiple gigabits traffic or more. for lower speed - not worth
of.
Bought an external USB HD enclosure but it doesn't work under FreeBSD.
Under FreeBSD-6.3-STABLE:
umass0: Super Top USB 2.0 IDE DEVICE, rev 2.00/2.01, addr 2
da2 at umass-sim0 bus 0 target 0 lun 0
da2: MAXTOR 6 L040J2 \\ Fixed Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Mark Ovens wrote:
Bought an external USB HD enclosure but it doesn't work under FreeBSD.
Under FreeBSD-6.3-STABLE:
umass0: Super Top USB 2.0 IDE DEVICE, rev 2.00/2.01, addr 2
da2 at umass-sim0 bus 0 target 0 lun 0
da2: MAXTOR 6 L040J2
Chuck Robey wrote:
I saw a mail yesterday about something nearly like this, from nej, except with
him, the umass device wasn't reporting anything at all, no device when he
plugged it in. I sent him a little piece of usb driver code that resets his usb
buss, just to experiment and see if that
On May 28, 2008, at 11:06 AM, Rob wrote:
These guys have a 2 or 4 port nic for $100:
http://www.soekris.com/lan16x1.htm
For small and medium sized enterprises that really just need firewall,
NAT, static routing and are fine with 100Mb ether on the router, I've
been happy with using
Mark Ovens wrote:
Chuck Robey wrote:
I saw a mail yesterday about something nearly like this, from nej, except with
him, the umass device wasn't reporting anything at all, no device when he
plugged it in. I sent him a little piece of usb driver code that resets his usb
buss, just to experiment
Chuck Robey wrote:
I saw a mail yesterday about something nearly like this, from nej, except
with
him, the umass device wasn't reporting anything at all, no device when he
plugged it in. I sent him a little piece of usb driver code that resets
his usb
buss, just to experiment and
Hi guys
Any clue?
Does FreeBSD supports TCP Offload Engine (TOE) from Broadcom in Dell PE2950?
--
Thanks!
BR / vj
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
On Wed, May 28, 2008 at 07:27:06PM +0100, Mark Ovens wrote:
Bought an external USB HD enclosure but it doesn't work under FreeBSD.
Under FreeBSD-6.3-STABLE:
umass0: Super Top USB 2.0 IDE DEVICE, rev 2.00/2.01, addr 2
da2 at umass-sim0 bus 0 target 0 lun 0
da2: MAXTOR 6 L040J2 \\
Roland Smith wrote:
You could try using the atausb driver instead of umass. Unfortunately it
doesn't have a manpage yet, but you have to unload umass if you want to
use atausb.
Thanks Roland, but I can't find atausb in either 6.3 or 7.0 - is it a
kld module?
Presumably, it would not work
Hello.
I'm interesting when perl 5.10 will be available in freebsd ports?
Always Want to ask same question about qt4.4.
--
Regards, Nickolay D. Hodyunya.
mailto: [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
VeeJay wrote:
Does FreeBSD supports TCP Offload Engine (TOE) from Broadcom in Dell PE2950?
from man bge:
X v1.0 compliant. It supports IP, TCP and UDP checksum offload for both
receive and transmit, multiple RX and TX DMA rings for QoS applications,
rules-based receive filtering,
For small and medium sized enterprises that really just need firewall, NAT,
static routing and are fine with 100Mb ether on the router, I've been happy
with using soekris net48XX boxes using m0n0wall
http://m0n0.ch/wall/
or pfsense
http://www.pfsense.com/
both FreeBSD based.
small but
On Wed, May 28, 2008 at 08:37:55PM +0100, Mark Ovens wrote:
Roland Smith wrote:
You could try using the atausb driver instead of umass. Unfortunately it
doesn't have a manpage yet, but you have to unload umass if you want to
use atausb.
Thanks Roland, but I can't find atausb in either
Roland Smith wrote:
Yes;
$ locate atausb
/usr/src/sys/modules/ata/atausb
/usr/src/sys/modules/ata/atausb/Makefile
(This is on 7-STABLE)
Ah, so it's not built by default!
Presumably, it would not work with other usb mass storage devices like
memory sticks or phones?
It should work with
Jeffrey Goldberg wrote:
On May 28, 2008, at 11:06 AM, Rob wrote:
These guys have a 2 or 4 port nic for $100:
http://www.soekris.com/lan16x1.htm
For small and medium sized enterprises that really just need firewall,
NAT, static routing and are fine with 100Mb ether on the router, I've
been
Wojciech Puchar wrote:
been happy with using soekris net48XX boxes using m0n0wall
small but expensive. used 486-pentium hardware is for free.
No it's not, they consume electricity. Soekris boxes are designed for
low-power. I had a 4501 and now have a 5501.
hi all...
i have dilemma.
i asked a hosting faclity to set up freebsd 7 on new server. and i
mentioned that it should be 64 bit.
now they when i get into the machine i get:
srv391# uname -a
FreeBSD srv391.carpathiahost.com 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun
Feb 24 10:35:36 UTC 2008
kalin m wrote:
hi all...
i have dilemma.
i asked a hosting faclity to set up freebsd 7 on new server. and i
mentioned that it should be 64 bit.
now they when i get into the machine i get:
srv391# uname -a
FreeBSD srv391.carpathiahost.com 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun
Feb 24
On Wed, May 28, 2008 at 04:56:26PM -0400, kalin m wrote:
hi all...
i have dilemma.
i asked a hosting faclity to set up freebsd 7 on new server. and i
mentioned that it should be 64 bit.
now they when i get into the machine i get:
srv391# uname -a
FreeBSD srv391.carpathiahost.com
On Wed, May 28, 2008 at 04:56:26PM -0400, kalin m wrote:
hi all...
i have dilemma.
i asked a hosting faclity to set up freebsd 7 on new server. and i
mentioned that it should be 64 bit.
now they when i get into the machine i get:
srv391# uname -a
FreeBSD srv391.carpathiahost.com
so i'm a bit confused about the the 64 bit and why the machine is identifying
itself as amd64 and not i686?
because this intel CPU is 64-bit AMD compatible (x86-64 standard).
the rules changed and now intel make AMD-compatible CPUs
___
In the last episode (May 28), Rob said:
VeeJay wrote:
Does FreeBSD supports TCP Offload Engine (TOE) from Broadcom in
Dell PE2950?
from man bge:
X v1.0 compliant. It supports IP, TCP and UDP checksum offload
for both receive and transmit, multiple RX and TX DMA rings for
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Mark Ovens wrote:
Chuck Robey wrote:
I saw a mail yesterday about something nearly like this, from nej,
except with
him, the umass device wasn't reporting anything at all, no device when he
plugged it in. I sent him a little piece of usb driver
On May 28, 2008, at 3:08 PM, Wojciech Puchar wrote:
For small and medium sized enterprises that really just need
firewall, NAT, static routing and are fine with 100Mb ether on the
router, I've been happy with using soekris net48XX boxes using
m0n0wall
small but expensive. used
Hello All,
Last week, one half of my dual port Qlogic fibre channel interface
started causing a page fault panic while probing the second port at
boot time.
I was able to get the system back up by disabling the BIOS on the
second port. The system still sees the 2nd port, but politely
I'd really appreciate if someone can shed some light on this for me. I'm
attempting to build a layer2 sniffer using dummynet and ipfw but I'm
having some problems building the new kernel with options BRIDGE. It
errors out with the message below. Any suggestions?
-cp
lois# /usr/sbin/config LOIS
Greg Himes wrote:
Hello All,
Last week, one half of my dual port Qlogic fibre channel interface
started causing a page fault panic while probing the second port at boot
time.
I was able to get the system back up by disabling the BIOS on the
second port. The system still sees the 2nd port,
Kurt Buff wrote:
On Sat, May 24, 2008 at 3:35 PM, Chris Whitehouse [EMAIL PROTECTED] wrote:
Kelly Jones wrote:
I begrudgingly use a Windows SharePoint server at a customer's request.
I'd like to automate (command-line) updating and creating documents,
lists, etc.
Is there a Unix tool that
On Wed, May 28, 2008 at 4:01 PM, Chris Whitehouse [EMAIL PROTECTED] wrote:
Kurt Buff wrote:
On Sat, May 24, 2008 at 3:35 PM, Chris Whitehouse [EMAIL PROTECTED]
wrote:
Kelly Jones wrote:
I begrudgingly use a Windows SharePoint server at a customer's request.
I'd like to automate
Tom Van Looy wrote:
Wojciech Puchar wrote:
been happy with using soekris net48XX boxes using m0n0wall
small but expensive. used 486-pentium hardware is for free.
No it's not, they consume electricity. Soekris boxes are designed for
low-power. I had a 4501 and now have a 5501.
And, other
I think maybe what he was expecting was a FreeBSD IA64 install on the box,
but they installed AMD64 instead
On Thu, May 29, 2008 at 4:48 AM, Wojciech Puchar
[EMAIL PROTECTED] wrote:
so i'm a bit confused about the the 64 bit and why the machine is
identifying itself as amd64 and not i686?
Outback Dingo wrote:
I think maybe what he was expecting was a FreeBSD IA64 install on the box,
but they installed AMD64 instead
*Correctly* installed.
Kris
___
freebsd-questions@freebsd.org mailing list
I have a problem with my newly installed Freebsd6.3. I use USB keyboard and
mouse, when start it all goes well, but after system boot process initalize
usb2 controllers, both my keyboard and mouse disappear. I have to physically
unplug them and plug them in again to use them.
I have
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jon Radel
Sent: Wednesday, May 28, 2008 5:24 PM
To: freebsd-questions@freebsd.org
Subject: Re: FreeBSD based router ...
Tom Van Looy wrote:
Wojciech Puchar wrote:
been happy with using
63 matches
Mail list logo