Wojciech Puchar wrote:
I couldn't find the hostname sent by dhcp, but found a way to find the
ip address.
just use hostname command.
I did, but the answer is empty (remember this is before /etc/rc is run).
Where is kept the data received by dhcp_client during pxe boot ?
The only problem i
Wojciech Puchar wrote:
i can see a reading speed difference 4 time slower on client than on
server (time tar -cf - /usr /dev/null).
I will play with jumbo MTU for network performance, but would anybody
know if i can ask system files NFS exports to stay in server memory ?
I have less than
add second echo to /var/log/messages ;)
Hope not to forget one ;-)
But is there a system call or configuration to do that automatically ? I can
see some echo in /etc/rc without any , and their result seems to go to
/var/messages.
I wish to learn to do clean scripting :-)
actually i
Bernard Dugas wrote:
So you din't think that if all files are already in RAM on server, i
will save the drive access time ?
Or do you think the NFS network access is so much slow that the disk
access time is just marginal ?
Do you think i should use something more efficient than NFS ?
On Mon, Dec 29, 2008 at 11:52:57PM +0200, Giorgos Keramidas wrote:
On Mon, 29 Dec 2008 20:27:17 +, Frank Shute fr...@shute.org.uk wrote:
You can keep a local copy of the docs update the sources for the
docs with csup but you have to regenerate them with a make command
after you have
less than 2Go to share and 2GO DDR2 is affordable.
you don't have to.
So you din't think that if all files are already in RAM on server, i will
save the drive access time ?
FreeBSD automatically use all free memory as cache.
___
As to NFS speed, you should experiment with NFS on TCP and run a large
number of nfsd on the server (see nfs_server_flags in rc.conf). For
example -n 6 or -n 8. Maybe also experiment with the readsize and
writesize. Anyways, i don't think you can expect the same throughput
via NFS (say 10 MB/s,
In freebsd-questions Digest, Vol 244, Issue 1, Message 6
On Sun, 28 Dec 2008 17:45:52 +0100 David Scialom dscia...@gmail.com wrote:
Hello,
It seems that it is impossible to modify the sysid with fdisk since FreeBSD
6.2. I am actually using FreeBSD7.0.
When I want to modify my the sysid
Wojciech Puchar wrote:
So you din't think that if all files are already in RAM on server, i
will save the drive access time ?
FreeBSD automatically use all free memory as cache.
OK
there is slowdown because network introduces slight delay,
but few ms at most if network is made properly
Bernard Dugas wrote:
Wojciech Puchar wrote:
So you din't think that if all files are already in RAM on server, i
will save the drive access time ?
FreeBSD automatically use all free memory as cache.
OK
there is slowdown because network introduces slight delay,
but few ms at most if
Peter Boosten wrote:
On 30 dec 2008, at 07:02, per...@pluto.rain.com wrote:
Does anyone know how to run asfiles on windowmaker?
Whereis its executable? (path)
I have no idea what asfiles is, but I would assume
`which asfiles' would tell you where it is located.
... unless it's not in
On Tue, 30 Dec 2008 13:33:45 +, Frank Shute fr...@shute.org.uk wrote:
On Mon, Dec 29, 2008 at 11:52:57PM +0200, Giorgos Keramidas wrote:
On Mon, 29 Dec 2008 20:27:17 +, Frank Shute fr...@shute.org.uk wrote:
You can keep a local copy of the docs update the sources for the
docs with csup
If one wants to set up a DHCP server in such a way that that a host
with a given MAC-address will, at any time it connects, get the same
IP address, one can record that fixed relation in the
/usr/local/etc/dhcpd.conf file.
Now, when someone already registered his laptop, and buys a new
latop
I just ran into something that has me stumped. It's probably a real
newbie question, but I can't figure it out...
I'm trying to add curl support to my PHP installation, but when I run
'make config' in the /usr/ports/lang/php5 directory, curl is not one
of the very small set of options
John Almberg wrote:
I just ran into something that has me stumped. It's probably a real
newbie question, but I can't figure it out...
I'm trying to add curl support to my PHP installation, but when I run
'make config' in the /usr/ports/lang/php5 directory, curl is not one
of the very small
John Almberg wrote:
I just ran into something that has me stumped. It's probably a real
newbie question, but I can't figure it out...
I'm trying to add curl support to my PHP installation, but when I run
'make config' in the /usr/ports/lang/php5 directory, curl is not one
of the very small
On Dec 30, 2008, at 1:26 PM, Michael Powell wrote:
John Almberg wrote:
I just ran into something that has me stumped. It's probably a real
newbie question, but I can't figure it out...
I'm trying to add curl support to my PHP installation, but when I run
'make config' in the
On Tue, Dec 30, 2008 at 1:16 PM, John Almberg jalmb...@identry.com wrote:
I just ran into something that has me stumped. It's probably a real newbie
question, but I can't figure it out...
I'm trying to add curl support to my PHP installation, but when I run 'make
config' in the
On Tue, Dec 30, 2008 at 1:35 PM, Glen Barber glen.j.bar...@gmail.com wrote:
On Tue, Dec 30, 2008 at 1:16 PM, John Almberg jalmb...@identry.com wrote:
I just ran into something that has me stumped. It's probably a real newbie
question, but I can't figure it out...
I'm trying to add curl
On Dec 30, 2008, at 1:36 PM, Glen Barber wrote:
On Tue, Dec 30, 2008 at 1:35 PM, Glen Barber
glen.j.bar...@gmail.com wrote:
On Tue, Dec 30, 2008 at 1:16 PM, John Almberg
jalmb...@identry.com wrote:
I just ran into something that has me stumped. It's probably a
real newbie
question, but I
there is slowdown because network introduces slight delay,
but few ms at most if network is made properly
This is a Gbps network with only 1 switch between nfs server and
client, with less than 0.2ms ping. So bandwidth should not be a
it should work with near-wire speed on 100Mbit clients.
Guys,
Someone send a sed website that i thought i had bookmarked on
firefox3. I don't see it in history; it is not b'marked.
This question may not be do-able in sed, I don't know.
BEen searching around for over an hour and a half; have tried
things
Здравствуйте, Questions.
1 allow all from any to any via rl0
2 allow all from any to any via rl1
109 skipto 110 tcp from any to any 80 in recv $iface #split only http trafic
109 skipto 200 all from any to any #do not split all other trafic
110 check-state
111 prob 0.5 skipto 131 in recv
On Dec 30, 2008, at 11:53 AM, Pieter Donche wrote:
Now, when someone already registered his laptop, and buys a new
latop to replace the old (a different MAC address), can then omshell
be used to record the change in the /usr/local/etc/dhcpd.conf file?
Does omshell edit the
On Tue, Dec 30, 2008 at 11:31:14AM -0800, Gary Kline wrote:
The problem is that there are many, _many_ embedded
A HREF=http://whatever Site/A in my hundreds, or
thousands, or files. I only want to delete the
http://junkfoo.com lines, _not_ the other Href links.
On Fri, Dec 19, 2008 at 10:37:46AM -0500, FreeBSD wrote:
Jerry McAllister a écrit :
On Thu, Dec 18, 2008 at 12:02:06PM -0500, FreeBSD wrote:
Daniel Bye a écrit :
On Thu, Dec 18, 2008 at 10:28:18AM -0600, Kirk Strauser wrote:
On Thursday 18 December 2008 09:16:10 FreeBSD
On Fri, Dec 19, 2008 at 01:04:26PM -0500, FreeBSD wrote:
Tom Worster a écrit :
On 12/19/08 10:37 AM, FreeBSD free...@optiksecurite.com wrote:
Because this server is monitored by Nagios and it emails me every hour a
warning because the swap is not 100% free (I know it's pretty extreme,
Здравствуйте, KES.
Вы писали 30 декабря 2008 г., 21:47:40:
K Здравствуйте, Questions.
K 1 allow all from any to any via rl0
K 2 allow all from any to any via rl1
K 109 skipto 110 tcp from any to any 80 in recv $iface #split only http trafic
K 109 skipto 200 all from any to any #do not
On Tue, Dec 30, 2008 at 09:16:23PM +0100, Roland Smith wrote:
On Tue, Dec 30, 2008 at 11:31:14AM -0800, Gary Kline wrote:
The problem is that there are many, _many_ embedded
A HREF=http://whatever Site/A in my hundreds, or
thousands, or files. I only want to delete the
Vince wrote:
Trying to change mtu, but don't look easy, where can i find the
possible range for ports ?
MTU can be a pain, check what your switch supports, and the manpage for
your network driver should say what MTU the nic supports.
Thank you for the method !
It seems that em and re are
On Tue, Dec 30, 2008 at 12:51:31PM -0800, Gary Kline wrote:
On Tue, Dec 30, 2008 at 09:16:23PM +0100, Roland Smith wrote:
On Tue, Dec 30, 2008 at 11:31:14AM -0800, Gary Kline wrote:
The problem is that there are many, _many_ embedded
A HREF=http://whatever Site/A in my hundreds, or
Здравствуйте, KES.
Вы писали 30 декабря 2008 г., 22:29:50:
K Здравствуйте, KES.
K Вы писали 30 декабря 2008 г., 21:47:40:
K Здравствуйте, Questions.
K 1 allow all from any to any via rl0
K 2 allow all from any to any via rl1
K 109 skipto 110 tcp from any to any 80 in recv $iface #split
On Tue, 30 Dec 2008 12:51:31 -0800, Gary Kline kl...@thought.org wrote:
All right, then is this the right syntax. In other words, do
I need the double quotes to match the http: string?
perl -pi.bak -e 'print unless /m/http:/ || eof; close ARGV if eof' *
Close, but not exactly
Hi Gary,
Am Dienstag, 30. Dez 2008, 11:31:14 -0800 schrieb Gary Kline:
The problem is that there are many, _many_ embedded
A HREF=http://whatever Site/A in my hundreds, or
thousands, or files. I only want to delete the
http://junkfoo.com lines, _not_ the other Href links.
sed or perl?
On Tue, Dec 30, 2008 at 12:51:31PM -0800, Gary Kline wrote:
On Tue, Dec 30, 2008 at 09:16:23PM +0100, Roland Smith wrote:
On Tue, Dec 30, 2008 at 11:31:14AM -0800, Gary Kline wrote:
The problem is that there are many, _many_ embedded
A HREF=http://whatever Site/A in my hundreds, or
Bernard Dugas wrote:
But :
nfsserver# ifconfig re0 -mtu 7422
ifconfig: -mtu: bad value
nfsserver# ifconfig re0 -mtu 7421
ifconfig: -mtu: bad value
Syntax error on the ifconfig command line:
% ifconfig de0
de0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
[...]
Wojciech Puchar wrote:
This is a Gbps network with only 1 switch between nfs server and
client, with less than 0.2ms ping. So bandwidth should not be a
it should work with near-wire speed on 100Mbit clients.
Server and clients are 1Gbps.
But i have a 4 factor of performance for reading only
On Tue, Dec 30, 2008 at 11:07:05PM +0200, Giorgos Keramidas wrote:
On Tue, 30 Dec 2008 12:51:31 -0800, Gary Kline kl...@thought.org wrote:
All right, then is this the right syntax. In other words, do
I need the double quotes to match the http: string?
perl -pi.bak -e 'print
Matthew Seaman wrote:
It's 'mtu ' not '-mtu '
I'm confused, thanks so much !
There was no option without - in my old unix time ;-)
Thanks to you, it seems that my max mtu is 9216 on em :
client9# ifconfig em1 mtu 9216
client9# ifconfig em1 mtu 9217
ifconfig: ioctl (set mtu): Invalid
On Tue, Dec 30, 2008 at 10:16:42PM +0100, Roland Smith wrote:
On Tue, Dec 30, 2008 at 12:51:31PM -0800, Gary Kline wrote:
On Tue, Dec 30, 2008 at 09:16:23PM +0100, Roland Smith wrote:
On Tue, Dec 30, 2008 at 11:31:14AM -0800, Gary Kline wrote:
The problem is that there are many,
Hi all,
Here I am away with the family visiting friends and I REALLY need to get
the iwi if up and running.
It's a recently updated system (7.1RC2). Read the man pages, tried
different variations on legal.intel_iwi.license_ack=1, iwi_load,
firmware_load etc. in /boot/loader.conf but I cannot get
nfsserver# time tar -cf - clientusr-amd64 /dev/null
5.001u 12.147s 1:23.92 20.4%69+1369k 163345+0io 0pf+0w
client9# time tar -cf - /usr /dev/null
tar: Removing leading '/' from member names
3.985u 19.779s 4:32.47 8.7% 74+1457k 0+0io 0pf+0w
Note : clientusr-amd64 is around 1.3GB and is
Peter Harrison wrote:
Tuesday, 30 December 2008 at 23:49:23 +0100, Per olof Ljungmark said:
Hi all,
Here I am away with the family visiting friends and I REALLY need
to get the iwi if up and running.
It's a recently updated system (7.1RC2). Read the man pages, tried
different
On Tue, Dec 30, 2008 at 10:16:33PM +0100, Bertram Scharpf wrote:
Hi Gary,
Am Dienstag, 30. Dez 2008, 11:31:14 -0800 schrieb Gary Kline:
The problem is that there are many, _many_ embedded
A HREF=http://whatever Site/A in my hundreds, or
thousands, or files. I only want to delete the
On 12/30/08, Michel Talon ta...@lpthe.jussieu.fr wrote:
Bernard Dugas wrote:
So you din't think that if all files are already in RAM on server, i
will save the drive access time ?
Or do you think the NFS network access is so much slow that the disk
access time is just marginal ?
Hi Gary,
Am Dienstag, 30. Dez 2008, 17:48:02 -0800 schrieb Gary Kline:
On Tue, Dec 30, 2008 at 10:16:33PM +0100, Bertram Scharpf wrote:
Hi Gary,
Am Dienstag, 30. Dez 2008, 11:31:14 -0800 schrieb Gary Kline:
The problem is that there are many, _many_ embedded
A HREF=http://whatever
Wojciech Puchar wrote:
nfsserver# time tar -cf - clientusr-amd64 /dev/null
5.001u 12.147s 1:23.92 20.4%69+1369k 163345+0io 0pf+0w
client9# time tar -cf - /usr /dev/null
tar: Removing leading '/' from member names
3.985u 19.779s 4:32.47 8.7% 74+1457k 0+0io 0pf+0w
Note :
47 matches
Mail list logo
