On Wednesday 25 February 2009 15:58:53 Mel wrote:
I looked for status on this project, can't seem to find it atm.
Found it:
http://forums.freebsd.org/showthread.php?t=306
Looks like it's even gonna be MFC'd \o/
--
Mel
Problem with today's modular software: they start with the modules
and
The named.conf is used only if you need to set up your owm DNS server and
you do not use someone other then the default.
To resolve external hosts you need to enter the dns server IP in the
/etc/resolv.conf file. It is not resolvE.conf.
Hope this will help you.
Regards,
Ivailo Tanusheff
I have Linux box sitting next to FreeBSD box that has a very cheap
Airlink 101 card but has no problems connecting to my WiFi network.
Every time when Linux box says that quality of connection drops below
10/100 FreeBSD box shows status: no carrier.
Linux connections still function ok.
I
Hey guys,
I'm currently running on FreeBSD 7.1 AMD64 using a ZFS filesystem, but
my /boot folder is linked to a UFS filesytem (/bootdir). I set it
up following the instructions here:
http://www.ish.com.au/solutions/articles/freebsdzfs
In a nut shell: Install a minimal FreeBSd 7.1
Date: Thu, 26 Feb 2009 14:19:14 -0500
From: st...@ibctech.ca
To: faiz...@hotmail.com
CC: li...@jnielsen.net; freebsd-questions@freebsd.org
Subject: Re: ping stucks/hangs on PCI 3com NIC sk0 interface but works on
builtin NIC
Faizan ul haq Muhammad wrote:
It depends. Are you
Hello all.
I`m using only one pf rule to fool routing table.
All was good, but after upgrade from 6.3 to 7.1 i`ve discovered that it
is not working anymore.
I`ve added: no state flags any to get it working again.
Now my list of rules is:
scrub in all
pass out on $if1 route-to ($if0 $if0gw) from
or maybe since you installed from an image (not over a network) the
resolv.conf was never created.
heres how i create it, never tried this freebsd though:
seq --format=nameserver 4.2.2.%g 1 5 /etc/resolv.conf
alternatively just adding this line:
nameserver 4.2.2.1
or whatever your dns server
Em Sex, 2009-02-27 às 14:45 +0300, z...@zaa.pp.ru escreveu:
On Fri, Feb 27, 2009 at 03:04:09PM +0530, Nataraj S Narayan wrote:
Hi
I hear that Mac OS X and later ones are based on FreeBSD. My wife is
planning to get a Macbook , which I don't quite approve. Mainly
because we need to pay
Hello,
I've a machine with an integrated Intel RAID controller (U320) which
uses the iir driver. I have two arrays, one RAID 1 with two disks and
one RAID 5 with 8 disks. The disks are all Seagate 320MB/s. The system
is running FreeBSD 7.0-RELEASE with 8 processors (2,40 Ghz) and 4GB or
RAM.
I
Faizan ul haq Muhammad wrote:
After the ping is done (whether it works or not), stop the tcpdump and
email the output to the list if you can. If you can't email it, at least
type out the IP addresses captured, and the direction the data is
attempting to flow eg:
208.70.104.210.22
Hi,
I hope someone will be able to help with this. I've already checked all
resources I could google but still can't get it to work. Basically my
terminal can show more than 16 colors but emacs doesn't want to use
these colors.
I run FreeBSD (7.1-RELEASE) as a virtual machine and use it without
Date: Fri, 27 Feb 2009 08:24:26 -0500
From: st...@ibctech.ca
To: faiz...@hotmail.com
CC: li...@jnielsen.net; freebsd-questions@freebsd.org
Subject: Re: ping stucks/hangs on PCI 3com NIC sk0 interface but works on
builtin NIC
Faizan ul haq Muhammad wrote:
After the ping is done
Faizan ul haq Muhammad wrote:
Provide the output to ifconfig bridge0, and kldstat.
ifconfig bridge0
bridge0: flags=8843UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST metric 0
mtu 1500
ther 0e:04:7b:09:e7:b0
inet 192.168.0.1 network 0xff00 broadcast 192.168.0.255
id 00:00:00:00:00:00
Hello!
I've a very strange problem connecting via ssh to a maschine running
7.1-RELEASE-p3 with OpenSSH_5.1p1 from very different ssh clients
including the client on the system itself.
I tried a lot of things; the problem DOES *NOT* APPEAR when doing *ONE* of
the following things:
*
I've a machine with an integrated Intel RAID controller (U320) which
uses the iir driver. I have two arrays, one RAID 1 with two disks and
one RAID 5 with 8 disks. The disks are all Seagate 320MB/s. The system
is running FreeBSD 7.0-RELEASE with 8 processors (2,40 Ghz) and 4GB or
RAM.
I have
Date: Fri, 27 Feb 2009 09:08:56 -0500
From: st...@ibctech.ca
To: faiz...@hotmail.com
CC: li...@jnielsen.net; freebsd-questions@freebsd.org
Subject: Re: ping stucks/hangs on PCI 3com NIC sk0 interface but works on
builtin NIC
Faizan ul haq Muhammad wrote:
Provide the output to
Not sure, I admit that the card is quite old (4 years), but 50 MB/s
seems really slow to me (especially for U320 SCSI) ..
U320 means interface speed, not disk speed.
___
freebsd-questions@freebsd.org mailing list
On Fri, 2009-02-27 at 16:07 +0100, Wojciech Puchar wrote:
Not sure, I admit that the card is quite old (4 years), but 50 MB/s
seems really slow to me (especially for U320 SCSI) ..
U320 means interface speed, not disk speed.
yes, but the disks are 10k RPM U320 too .. for the price they
On Fri, 2009-02-27 at 15:37 +0100, Wojciech Puchar wrote:
I've a machine with an integrated Intel RAID controller (U320) which
uses the iir driver. I have two arrays, one RAID 1 with two disks and
one RAID 5 with 8 disks. The disks are all Seagate 320MB/s. The system
is running FreeBSD
I only want sendmail in a jail to do one thing: forward nightly reports from
r...@localhost to a real account on another
machine. What's the proper way to configure this? By default,
sendmail_enable=NO in /etc/rc.conf still gives a
running sendmail that accepts mail from other hosts:
On 2/27/09, Grzegorz Junka c...@gjunka.com wrote:
Hi,
I hope someone will be able to help with this. I've already checked all
resources I could google but still can't get it to work. Basically my
terminal can show more than 16 colors but emacs doesn't want to use
these colors.
I run FreeBSD
On Friday 27 February 2009 10:49:22 am Kirk Strauser wrote:
I only want sendmail in a jail to do one thing: forward nightly reports
from r...@localhost to a real account on another machine. What's the
proper way to configure this? By default, sendmail_enable=NO in
/etc/rc.conf still gives a
i just bought a store-brand one at Best Buy at the local shop, internal 3.5
USB dongle that plugs into the motherboard header. I think it's a 7-in-1
(or is it up to 14-in-1???)
Works well, but the devfs has a little trick that if you slip in a USB drive
after bootup, you have to write 0
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Can I run sysinstall on a live system, booted say from ad0 and use it to
install a new OS onto a second drive, say ad1? I'm trying to do something like
this:
sysinstall configFile=install.cfg loadConfig
where I have the target drive identified in the sysinstall script, but it
doesn't seem
On Fri, Feb 27, 2009 at 09:43:54AM -0800, Peter Steele wrote:
Can I run sysinstall on a live system, booted say from ad0 and use it to
install a new OS onto a second drive, say ad1? I'm trying to do something
like this:
sysinstall configFile=install.cfg loadConfig
where I have the
On Fri, Feb 27, 2009 at 02:06:04PM -0300, SERGIO RODRIGO DE CAMARGO PAULI wrote:
man cdcontrol
HTH,
Yuri
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
On Friday 27 February 2009 04:14:49 Julien Cigar wrote:
Hello,
I've a machine with an integrated Intel RAID controller (U320) which
uses the iir driver. I have two arrays, one RAID 1 with two disks and
one RAID 5 with 8 disks. The disks are all Seagate 320MB/s. The system
is running FreeBSD
On Friday 27 February 2009 08:48:39 Jerry McAllister wrote:
On Fri, Feb 27, 2009 at 09:43:54AM -0800, Peter Steele wrote:
Can I run sysinstall on a live system, booted say from ad0 and use it to
install a new OS onto a second drive, say ad1? I'm trying to do something
like this:
On Friday 27 February 2009 08:06:04 SERGIO RODRIGO DE CAMARGO PAULI wrote:
How can i open the CD-ROM with line command in FreeBSD?
cdcontrol eject if atapicd(4)
camcontrol eject cd# if atapicam(4)
--
Mel
Problem with today's modular software: they start with the modules
and never get to
Kirk Strauser wrote:
I only want sendmail in a jail to do one thing: forward nightly reports from r...@localhost to a real account on another
machine. What's the proper way to configure this? By default, sendmail_enable=NO in /etc/rc.conf still gives a
running sendmail that accepts mail from
Kirk Strauser wrote:
I only want sendmail in a jail to do one thing: forward nightly reports from
r...@localhost to a real account on another
machine. What's the proper way to configure this?
Edit /etc/mail/aliases. All reports are pointed to root. But you can
point it anywhere you want:
My server is currently running on FreeBSD 5.4-RELEASE #0.
I installed the port software, P5-Mail-ClamAV with sendmail along with
others: Spamassassin and Milter etc. Everything was compiled fine, and
sendmail is working with Spamassin too. However, when I
execute clamav-clamd.sh,
Paul B. Mahol wrote:
On 2/27/09, Grzegorz Junka c...@gjunka.com wrote:
Hi,
I hope someone will be able to help with this. I've already checked all
resources I could google but still can't get it to work. Basically my
terminal can show more than 16 colors but emacs doesn't want to use
these
Yes for sure. You can partition secondary drives on a running system as long
as the drive isn't mounted and your kern.securelevel 2.
It's -1, so I assume that's okay.
You will need to define doesn't seem to like what I'm trying to do to get a
more constructive answer.
Yeah, that wasn't
Ihave the src for openoffice-3.0.1 but lack the space to build it.
Before I d/loaded the tarballs I did check for a pre-built version-3
package. Couldn't find any. So, nutshell: is there any prefab package
anywhere? I don't know much about the p2p distribution
In response to mtan...@comcast.net:
My server is currently running on FreeBSD 5.4-RELEASE #0.
I installed the port software, P5-Mail-ClamAV with sendmail along with
others: Spamassassin and Milter etc. Everything was compiled fine, and
sendmail is working with Spamassin too.
On Fri, Feb 27, 2009 at 10:23:33PM +0200, Ghirai wrote:
On Fri, 27 Feb 2009 11:51:05 -0800
Gary Kline kl...@thought.org wrote:
Ihave the src for openoffice-3.0.1 but lack the space to
build it. Before I d/loaded the tarballs I did check for a pre-built
version-3 package. Couldn't
On Fri, 27 Feb 2009 11:51:05 -0800
Gary Kline kl...@thought.org wrote:
Ihave the src for openoffice-3.0.1 but lack the space to
build it. Before I d/loaded the tarballs I did check for a pre-built
version-3 package. Couldn't find any. So, nutshell: is there any
prefab package
On Friday 27 February 2009 08:06:04 SERGIO RODRIGO DE CAMARGO PAULI wrote:
How can i open the CD-ROM with line command in FreeBSD?
/usr/ports/sysutils/eject/ ?
Chris
___
freebsd-questions@freebsd.org mailing list
Hi
I would like to mount from same NFS server the same partition in many point
for using jail. For example I would
mount NFS_SERVER:/home /jail/smtp-server
mount NFS_SERVER:/home /jail/apache_server
I've just check it's working, but I would like to known if they are some
hej mel, thanx for the information. so it's fixed (ufs, msdosfs) on
CURRENT. finally after years of pain, i cannot wait to test that :D
best regards marco
Mel wrote:
On Wednesday 25 February 2009 15:58:53 Mel wrote:
I looked for status on this project, can't seem to find it atm.
On Fri, 27 Feb 2009, Steve Franks wrote:
I have personally found very few card readers that reliably detect a
card, then allow you to mount and use it on 7.1 without a freeze, or a
crash on mount or *after* or *during* unmount (I'm not a reformed
ubuntu user, I don't just rip the card out and
That's my problem in a nutshell ultimately--how do I tell sysinstall where my
target root is? It impacts the whole
session, including packageAdd commands.
I did a bit of snooping around the distribution and I see that each directory
has a simple install script to install base, the kernel,
Hello,
I've got a Netra t1 105 running 7.1-RELEASE/sparc64. The box has a
pair of 9GB SCSI drives that I've configured into a geom mirror.
Recently, I saw in my log:
Feb 20 03:40:25 host kernel: sym0: unexpected disconnect
Feb 20 03:40:43 host kernel: (da1:sym0:0:1:0): READ(10). CDB: 28 0 0
3b
Le 27/02/2009 à 20:13:44-0200, Rodrigo Gonzalez a écrit
Not sure if there is any problem with that, but why not mounting in one
place and using symbolic links?
mount NFS_SERVER:/home/jail/mnt
ln -s /jail/mnt /jail/smtp-server
ln -s /jail/mnt /jail/apache_server
Because in a
Not sure if there is any problem with that, but why not mounting in one
place and using symbolic links?
mount NFS_SERVER:/home /jail/mnt
ln -s /jail/mnt /jail/smtp-server
ln -s /jail/mnt /jail/apache_server
Albert Shih wrote:
Hi
I would like to mount from same NFS server the same
Rodrigo Gonzalez rjgonz...@gmail.com wrote:
Not sure if there is any problem with that, but why not mounting in one
place and using symbolic links?
Symlinks don't work consistently within jails.
But we have several places where we do multiple mounts and have never
seen any problems.
mount
On Friday 27 February 2009 12:29:55 Albert Shih wrote:
Hi
I would like to mount from same NFS server the same partition in many point
for using jail. For example I would
mount NFS_SERVER:/home /jail/smtp-server
mount NFS_SERVER:/home /jail/apache_server
I've just check it's
On 2/27/09, Grzegorz Junka x...@poczta.onet.pl wrote:
Paul B. Mahol wrote:
On 2/27/09, Grzegorz Junka c...@gjunka.com wrote:
Hi,
I hope someone will be able to help with this. I've already checked all
resources I could google but still can't get it to work. Basically my
terminal can show
On Thu, 26 Feb 2009, ?? ?? wrote:
Nice to meet you.
I'm japanese ,Katsurou Takahash.
I started to use FreeBSD to constitute my file server and I want to use
FreeBSD as Desktop OS.
I would like to know how to setting FreeBSD as Desktop OS by Xorg on VMware
Fusion act 2.
Or I want to know how
On Fri, 27 Feb 2009 19:31:55 +, Grzegorz Junka c...@gjunka.com wrote:
FreeBSD port doesn't allow to configure Emacs in any way, neither from
the original port, nor from the nox11 version. I don't think there is
any special option for emacs to show 256 colors. Wherever I could find
some
Paul B. Mahol wrote:
On 2/27/09, Grzegorz Junka x...@poczta.onet.pl wrote:
Paul B. Mahol wrote:
On 2/27/09, Grzegorz Junka c...@gjunka.com wrote:
Hi,
I hope someone will be able to help with this. I've already checked all
resources I could google but still can't get it to
Giorgos Keramidas wrote:
On Fri, 27 Feb 2009 19:31:55 +, Grzegorz Junka c...@gjunka.com wrote:
FreeBSD port doesn't allow to configure Emacs in any way, neither from
the original port, nor from the nox11 version. I don't think there is
any special option for emacs to show 256 colors.
Paul B. Mahol wrote:
Not really.
You can try changing Co cap from 8 to 256 inside termcap file, dont
forget to use cap_mkdb after that, and dont make stupid mistakes.
Perhaps emacs should like vim enable changing Co cap inside itself.
Related to tput command, you should use tput Co
tput colors
On Thu, 26 Feb 2009 22:53:01 -0800 (PST), devindg dgarcia.t...@gmail.com
wrote:
I went ahead and tried your
suggestion, but the problem persists. However -- and I should have given
this more thought earlier -- I looked at the Xorg log, and it may provide
more useful information.
This is
Mel wrote:
On Thursday 26 February 2009 08:48:35 Tim Judd wrote:
Building WITHOUT_KERBEROS and installing MIT-port, is best option to use that
implementation. You may need to remove libraries by hand, not sure if make
delete-old-libs covers it.
Using WITHOUT_KERBEROS to build world IIRC
I have upgraded my 7.0-RELEASE system to RELENG_7 as of 02/19/2009. I
had Firefox 2.0.0.12 installed before the upgrade. Then, I installed
Adobe Flash 9 following the instructions here
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=51075+0+archive/2008/freebsd-emulation/20081102.freebsd-emulation
At this present time, I don't have the option of using a different keyboard.
I did, however, run the various commands that you suggested. Here are the
results:
ls -l /dev/ukbd0 - crw--- 1 root wheel0, 95 Feb 18 23:57
/dev/ukbd0
dmesg | grep ^ukbd - ukbd0: Logitech Logitech USB
Hi,
recently we've had a Mac notebook of some sort on our LAN, that likes to
make these DNS queries from time to time, to no avail, as noticed on a
filtering bridge between the LAN and the router+DNS at 192.168.0.1:
16:13:05.020397 192.168.0.59.53207 192.168.0.1.53: 63162+ PTR?
When is the the X-Org mega package going to be recreated so it contains
all the fixes caused by 7.1 release as detailed in /usr/ports/UPDATEING?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
61 matches
Mail list logo
