Thanks guys. I think Julian gave me the answer I was looking for.
On the other hand I believe that CARP handbook/man pages are inaccurate.
I'm not supposed to look for these kind of things on a mailing list.
Working instructions are the most important information and have to be
there. I also
On 02/11/2011 20:52, AN wrote:
I have a question about how to configure DNS. My local network is 10.x,
and I sometimes need to connect to a remote VPN. My question is how do
I configure BIND to forward queries to a different server only for a
specific domain.
This sounds like a job for a
On 11/3/11 8:51 AM, Matthew Seaman wrote:
On 02/11/2011 20:52, AN wrote:
I have a question about how to configure DNS. My local network is 10.x,
and I sometimes need to connect to a remote VPN. My question is how do
I configure BIND to forward queries to a different server only for a
iperf
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.2 sec 6.22 GBytes 887 Mbits/sec
transfers in via ssh are nice and nifty too.
Vince
On 02/11/2011 23:55, Gary Gatten wrote:
Is the interface really at 1Gb? Have you tested with iperf, ftp, or anything
other than nfs?
I'll give it a try when i get a moment, These servers are all on gigabit
LAN (sadly 1500 mtu until I can get the network guy to schedule an
outage to reboot the switches and enable jumbo frames,) same subnet so i
would expect UDP to have similar or better performance.
Vince
On 02/11/2011 23:53,
What software, base or ports, is used to burn a CD or DVD on a SATA drive,
/dev/cd0 ?
Would burncd be appropriate, or do I need cdrtools? Or cdrkit?
This is on FreeBSD 9.0-RC1 amd64.
I built and installed sysutils/cdrtools when there was a thread on burncd and
SATA, but cdrecord can't see
On 03/11/2011 10:00, Damien Fleuriot wrote:
You can simply create a forward zone.
Actually, yes, that's a good idea too. Should have much the same effect
and it's been available in BIND approximately forever. There's
difference in the niggling details of how it all works, so worth
Hi,
Reference:
From: Snoop sn...@email.it
Date: Thu, 03 Nov 2011 08:18:30 +0100
Message-id: 1320304710.17303.11.ca...@blackfriar.inhio.eu
Snoop wrote:
Thanks guys. I think Julian gave me the answer I was looking for.
On the other hand I believe that CARP handbook/man
On Thu, 3 Nov 2011 10:32:16 + (GMT), Thomas Mueller wrote:
What software, base or ports, is used to burn a CD or DVD on
a SATA drive, /dev/cd0 ?
Would burncd be appropriate, or do I need cdrtools? Or cdrkit?
This is on FreeBSD 9.0-RC1 amd64.
I can imagine that in 9.0 where acd is
On 11/3/11 11:35 AM, Matthew Seaman wrote:
On 03/11/2011 10:00, Damien Fleuriot wrote:
Actually, using a view that matches only the VPN's IP range would do the
trick easily and efficiently.
Views are a way of giving a different answer depending on who is asking
the question -- how does
Is there a program to check physical memory usage in FreeBSD(using 8.2
RELEASE)?
In vain of 'free' in Linux.
I know you can check the values with sysctl, I was just checking if anyone
has a cleaner option.
I was always curious.
Thanks
Jon
___
Original Message
Subject:i386/162270: I need to install freebsd 7.4 manual
Resent-Date:Thu, 3 Nov 2011 12:50:05 GMT
Resent-From:freebsd-gnats-sub...@freebsd.org (GNATS Filer)
Resent-To: freebsd-i...@freebsd.org
Date: Thu, 3 Nov 2011 12:47:53 GMT
From:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/11/11 00:22, Rares Aioanei wrote:
Original Message
Subject: i386/162270: I need to install freebsd 7.4 manual
Resent-Date: Thu, 3 Nov 2011 12:50:05 GMT
Resent-From: freebsd-gnats-sub...@freebsd.org (GNATS
On 11/3/11 9:18 PM, Jon Schipp wrote:
Is there a program to check physical memory usage in FreeBSD(using 8.2
RELEASE)?
Hi Jon,
Check out the port /usr/ports/sysutils/sysinfo .
HTH
___
freebsd-questions@freebsd.org mailing list
On 11/3/11 2:22 PM, Rares Aioanei wrote:
Original Message
Subject: i386/162270: I need to install freebsd 7.4 manual
Resent-Date: Thu, 3 Nov 2011 12:50:05 GMT
Resent-From: freebsd-gnats-sub...@freebsd.org (GNATS Filer)
Resent-To: freebsd-i...@freebsd.org
On Thu, Nov 3, 2011 at 9:25 AM, Rares Aioanei bsdlis...@gmail.com wrote:
On 11/03/2011 03:18 PM, Jon Schipp wrote:
Is there a program to check physical memory usage in FreeBSD(using 8.2
RELEASE)?
In vain of 'free' in Linux.
I know you can check the values with sysctl, I was just checking
On Thu, 3 Nov 2011 10:06:19 -0400
Jon Schipp jonsch...@gmail.com wrote:
On Thu, Nov 3, 2011 at 9:25 AM, Rares Aioanei bsdlis...@gmail.com wrote:
On 11/03/2011 03:18 PM, Jon Schipp wrote:
Is there a program to check physical memory usage in FreeBSD(using 8.2
RELEASE)?
In vain of
Could you comment on the pros and cons of using INST_BASE=on in postfix
on a production server?
--
Janos Dohanics
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
On Thu, Nov 3, 2011 at 10:47 AM, Janos Dohanics w...@3dresearch.com wrote:
Could you comment on the pros and cons of using INST_BASE=on in postfix
on a production server?
Great question! I know there has been some discussion to be able to
choose your base MTA upon install but I don't know how
Hello Jon,
Perhaps the port sysutils/freecolor.
Cheers ...
Mark
Is there a program to check physical memory usage in FreeBSD(using 8.2
RELEASE)?
In vain of 'free' in Linux.
I know you can check the values with sysctl, I was just checking if
anyone
has a cleaner option.
I was always curious.
I've been working with FreeBSD 9.0-RC1, and it's good but still has
a few rough edges. I understand that since RC1, llvm and Clang have
been updated and can now successfully compile the world (an
un-GNUed toolchain at last!) and that some disk bugs have been
fixed. Is there an ETA for RC2?
Jon Schipp jonsch...@gmail.com writes:
On Thu, Nov 3, 2011 at 9:25 AM, Rares Aioanei bsdlis...@gmail.com wrote:
On 11/03/2011 03:18 PM, Jon Schipp wrote:
Is there a program to check physical memory usage in FreeBSD(using 8.2
RELEASE)?
In vain of 'free' in Linux.
I know you can check the
I would like to know about freebsd-update command.
It is rumoured that freebsd-update command does not work well with custom
kernel.
First question is the following :
su -
#freebsd-update fetch
#freebsd-update install
Does this command work well?
The answer is .
[A].Always work, [B]Depend
On Thu, Nov 3, 2011 at 11:35 AM, Robert Bonomi bon...@mail.r-bonomi.comwrote:
From owner-freebsd-questi...@freebsd.org Thu Nov 3 08:17:46 2011
Date: Thu, 3 Nov 2011 09:18:06 -0400
From: Jon Schipp jonsch...@gmail.com
To: freebsd-questions@freebsd.org
Subject: Check Memory Usage,
It will work fine - it won't attempt to update the kernel.
On Thu, Nov 3, 2011 at 8:49 AM, masayoshi rocksta...@y7mail.com wrote:
I would like to know about freebsd-update command.
It is rumoured that freebsd-update command does not work well with custom
kernel.
First question is the
On Thu, Nov 3, 2011 at 9:13 AM, Jason Helfman jhelf...@e-e.com wrote:
I does work fine with a custom kernel, as long as you are running and
maintaining the actual update server that distributes.
I don't think that's relevant. It works fine with the public servers.
On Thu, Nov 3, 2011 at 11:55 AM, Lowell Gilbert
freebsd-questions-lo...@be-well.ilk.org wrote:
Jon Schipp jonsch...@gmail.com writes:
On Thu, Nov 3, 2011 at 9:25 AM, Rares Aioanei bsdlis...@gmail.com
wrote:
On 11/03/2011 03:18 PM, Jon Schipp wrote:
Is there a program to check
On Thu, Nov 3, 2011 at 11:12 AM, Jon Schipp jonsch...@gmail.com wrote:
I'm under the impression that virtual memory and physical memory usage are
very different.
e.g. vmstat and top report very different memory values.
If I assume this is an XY problem, and your true goal is find out what
On Thu, Nov 03, 2011 at 08:49:16AM -0700, masayoshi thus spake:
I would like to know about freebsd-update command.
It is rumoured that freebsd-update command does not work well with custom
kernel.
First question is the following :
su -
#freebsd-update fetch
#freebsd-update install
Does this
On Thu, Nov 03, 2011 at 09:19:29AM -0700, Michael Sierchio thus spake:
On Thu, Nov 3, 2011 at 9:13 AM, Jason Helfman jhelf...@e-e.com wrote:
I does work fine with a custom kernel, as long as you are running and
maintaining the actual update server that distributes.
I don't think that's
This is simply not the case. freebsd-update works on the basis of
cryptographic hashes on the binaries. It is, after all, a binary
update program. If it detects a custom kernel, it will not update the
kernel, but updates userland programs. It doesn't *care* what your
kernel config name is, it
I beg to differ. If you run a kernel called CUSTOM, it won't work. And if
you run a custom kernel called GENERIC, the moment you upgrade, you custom
kernel is no longer custom.
All of this aside, I would be interested in hearing how you are able to
avoid non-custom updates to your custom
On Thu, Nov 03, 2011 at 04:38:00AM +0100, Polytropon wrote:
Date: Thu, 3 Nov 2011 04:38:00 +0100
From: Polytropon free...@edvax.de
Subject: Re: Anything like mkmf for foo linux?
To: Gary Kline kl...@thought.org
Cc: FreeBSD Mailing List freebsd-questions@freebsd.org
X-Mailer: Sylpheed 3.1.1
Jon Schipp jonsch...@gmail.com writes:
You wouldn't want to know when your machine has reached periods of high
memory utilization?
No, I want to know when my machine would perform better if it had more
memory. Keeping memory in use when it otherwise would be free means I
get *better*
On Thu, Nov 03, 2011 at 09:42:12AM -0700, Michael Sierchio thus spake:
This is simply not the case. freebsd-update works on the basis of
cryptographic hashes on the binaries. It is, after all, a binary
update program. If it detects a custom kernel, it will not update the
kernel, but updates
On Thu, Nov 3, 2011 at 4:23 PM, Alejandro Imass a...@p2ee.org wrote:
On Thu, Nov 3, 2011 at 10:47 AM, Janos Dohanics w...@3dresearch.com wrote:
Could you comment on the pros and cons of using INST_BASE=on in postfix
on a production server?
Great question! I know there has been some
Sometimes, while building process of some port or system kernel are in
progress, you suddenly remember that you did something wrong and have to stop,
solve your mistake and start one more time.
Is it clear to interrupt the building process just by pressing Ctrl + C?
If it's so, do I need to
From owner-freebsd-questi...@freebsd.org Thu Nov 3 12:10:08 2011
From: =?koi8-r?B?4c7Uz84g68zF09M=?= rc5h...@yandex.ru
To: freebsd-questions@freebsd.org
Date: Thu, 03 Nov 2011 21:10:19 +0400
Subject: Is it safe to interrupt (Ctrl + C) while building a port or kernel?
Sometimes, while
---
Inexperienced FreeBSD user: Level 1
pow 1, spd 1, vit 1,int 1,luck 1
--- On Fri, 4/11/11, Alexandre axel...@ymail.com wrote:
From: Alexandre axel...@ymail.com
Subject: Re: freebsd-update (custom kernel)
To: Jason Helfman jhelf...@e-e.com, Michael Sierchio
ku...@tenebras.com, masayoshi
On 11/3/11 6:20 PM, Robert Bonomi wrote:
From owner-freebsd-questi...@freebsd.org Thu Nov 3 12:10:08 2011
From: =?koi8-r?B?4c7Uz84g68zF09M=?= rc5h...@yandex.ru
To: freebsd-questions@freebsd.org
Date: Thu, 03 Nov 2011 21:10:19 +0400
Subject: Is it safe to interrupt (Ctrl + C) while
Christer Solskogen christer.solsko...@gmail.com writes:
Hi,
You can do this a lot easier with just:
sendmail_enable=NONE
From rc.sendmail(8) :
RC.CONF VARIABLES
The following variables affect the behavior of rc.sendmail. They are
defined in /etc/defaults/rc.conf and can be changed in
Sorry,all.
I will email same message.
I am not familiar with this webmail.
Thank you very much for the understandable explanations.
I appreciate it very much.
___
freebsd-questions@freebsd.org mailing list
I running 8.2-RELEASE-p4.
I have just run freebsd-update and it dave done something I dont't understand:
# freebsd-update fetch
Looking up update.FreeBSD.org mirrors... 4 mirrors found.
Fetching metadata signature for 8.2-RELEASE from update5.FreeBSD.org... done.
Fetching metadata index... done.
02.11.2011, 14:01, Conrad J. Sabatier conr...@cox.net:
I just noticed, looking back at your previous mail, that you don't seem
to have a device smbios line in your kernel config. Try adding that
and see if the smbios facility shows up at boot time.
You're actually right!
Now, with this
03.11.2011, 21:20, Robert Bonomi bon...@mail.r-bonomi.com:
If it's so, do I need to run make clean before I start make one more
time?
Authoritative answer: It depends.
On what you 'did wrong, and what it takes to fix it.
e.g., if you're building a kernel the 'classial' way, that is
On Thu, 03 Nov 2011 18:29:06 +0100, Damien Fleuriot m...@my.gd) wrote:
On 11/3/11 6:20 PM, Robert Bonomi wrote:
From owner-freebsd-questi...@freebsd.org Thu Nov 3 12:10:08 2011
From: =?koi8-r?B?4c7Uz84g68zF09M=?= rc5h...@yandex.ru
To: freebsd-questions@freebsd.org
Date: Thu, 03 Nov
02.11.2011, 14:01, Conrad J. Sabatier conr...@cox.net:
I just noticed, looking back at your previous mail, that you don't seem
to have a device smbios line in your kernel config. Try adding that
and see if the smbios facility shows up at boot time.
You're actually right!
Now, with
Hi all,
I created a ZFS filesystem on a freebsd-zfs partition. So far so good.
Now the problem comes when exporting and importing it.
I have two boxes with 9.0-RC1. On one of them zfs import says the
filesystem is corrupt, whereas in the other box zfs import works
fine. How so?
Any ideas
On Thu, 3 Nov 2011, ? ? wrote:
Is it clear to interrupt the building process just by pressing Ctrl + C?
If it's so, do I need to run make clean before I start make one more time?
With ports, a make clean before rebuilding is a good idea. The build
might not be able to continue
On Thu, Nov 03, 2011 at 01:48:47PM -0500, Robert Bonomi wrote:
On Thu, 03 Nov 2011 18:29:06 +0100, Damien Fleuriot m...@my.gd) wrote:
On 11/3/11 6:20 PM, Robert Bonomi wrote:
From owner-freebsd-questi...@freebsd.org Thu Nov 3 12:10:08 2011
From: =?koi8-r?B?4c7Uz84g68zF09M=?=
On Thu, Nov 3, 2011 at 6:19 PM, Eric Masson e...@free.fr wrote:
From rc.sendmail(8) :
snip
See, know I also learned something today :-)
--
chs,
___
freebsd-questions@freebsd.org mailing list
On Thu, 03 Nov 2011 22:48:26 +0400
Антон Клесс rc5h...@yandex.ru wrote:
03.11.2011, 21:20, Robert Bonomi bon...@mail.r-bonomi.com:
If it's so, do I need to run make clean before I start make
one more time?
Authoritative answer: It depends.
On what you 'did wrong, and what it
On Thu, 3 Nov 2011 12:20:46 -0500 (CDT)
Robert Bonomi wrote:
From owner-freebsd-questi...@freebsd.org Thu Nov 3 12:10:08 2011
From: =?koi8-r?B?4c7Uz84g68zF09M=?= rc5h...@yandex.ru
To: freebsd-questions@freebsd.org
Date: Thu, 03 Nov 2011 21:10:19 +0400
Subject: Is it safe to interrupt
Hello.
I realised something weird in FreeBSD 10.-CURRENT/amd64 (CLANG
compiled), build as from today (buildworld).
Working the whole day coding some pyhton scripts and committing the code
to my subversion server (most recent subversion from the ports
collection, the server is a FreeBSD
On Thu, 3 Nov 2011 13:48:47 -0500 (CDT)
Robert Bonomi bon...@mail.r-bonomi.com wrote:
[snip]
I am likely _not_ the typical user -- I run a monolithic kernel, with
everything I need 'compiled in'; *no* loadable modules. Yeah, it can
be a nuisance if I need something that isn't compiled in,
Janos Dohanics w...@3dresearch.com writes:
Could you comment on the pros and cons of using INST_BASE=on in postfix
on a production server?
I wouldn't describe either the pros or the cons as particularly strong.
If you're not going to use sendmail, you might want to remove it. If
you do
On Thu, Nov 03, 2011 at 11:17:08PM +0100, O. Hartmann wrote:
Hello.
I realised something weird in FreeBSD 10.-CURRENT/amd64 (CLANG
compiled), build as from today (buildworld).
Working the whole day coding some pyhton scripts and committing the code
to my subversion server (most recent
Hi!
Today I installed smartmontools on FreeBSD 8.2-RELEASE-p3. In the
smartd.conf I changed just DEVICESCAN -a and I have in /var/log/messages:
acd0: FAILURE - ATA_IDENTIFY status=51READY,DSC,ERROR error=4ABORTED
Do I need to setup something else in the smartd.conf or is something wrong
with
On Thu, Nov 3, 2011 at 6:39 PM, ajtiM lum...@gmail.com wrote:
Hi!
Today I installed smartmontools on FreeBSD 8.2-RELEASE-p3. In the
smartd.conf I changed just DEVICESCAN -a and I have in /var/log/messages:
acd0: FAILURE - ATA_IDENTIFY status=51READY,DSC,ERROR error=4ABORTED
Do I need to
I have been attempting to install breeBSD 8.2 on my 160GB apple tv 1 hard
drive. I made it so there was a blank space to partition 100GB. In the
installer I clicked make slice on that empty space, used the auto partition
sequence, then clicked all for files to install. After this happened I got
On Thu, 3 Nov 2011 11:23:46 -0400
Alejandro Imass a...@p2ee.org wrote:
On Thu, Nov 3, 2011 at 10:47 AM, Janos Dohanics w...@3dresearch.com
wrote:
Could you comment on the pros and cons of using INST_BASE=on in
postfix on a production server?
Great question! I know there has been some
61 matches
Mail list logo