Scott Bennett wrote:
have quite a few windowmaker-related ports installed. Only one of those
related ports appeared in the portmaster output, and windowmaker itself was
absent, so I looked at the numbers next.
I think --list-origins lists only leaf packages and not dependencies.
It is
Hey everyone. I've successfully setup a network bridge in
/etc/rc.conf. However, I am only able to access the network if I dhcp
on bridge0 *after* the bridge is configured. If I try to set a static
IP on the bridge, things don't work. Here's my /etc/rc.conf:
cloned_interfaces=bridge0
On 29/12/2011 07:48, ja...@colannino.org wrote:
bridge0 is configured with the IP 192.168.1.6, but I can't ping out.
However, once I run dhclient in bridge0, things magically work. Does
anyone know why the above won't work? Thanks!
What's the error message you see when you fail to ping out?
2011/12/29 Victor Sudakov v...@mpeks.tomsk.su:
Peter Andreev wrote:
Victor, we researched this topic and learned that response time highly
depends on distance between user and resolver, while cache influence
on this value is lesser.
So I advice you to keep all as is.
Be it so.
Peter Andreev wrote:
Victor, we researched this topic and learned that response time highly
depends on distance between user and resolver, while cache influence
on this value is lesser.
So I advice you to keep all as is.
Be it so. Thank you.
And the reason for the whole
For the first time, a customer is asking me for root access to said
customer's servers.
Obviously, I must comply. At the same time, I cannot continue be
accountable for those servers.
Is this that simple and clear cut?
Assuming that I'll be asked to continue administering said servers, I guess
2011/12/29 Victor Sudakov v...@mpeks.tomsk.su:
Peter Andreev wrote:
Victor, we researched this topic and learned that response time
highly
depends on distance between user and resolver, while cache influence
on this value is lesser.
So I advice you to keep all as is.
Be
On Thu, 29 Dec 2011 04:01:42 -0500, Irk Ed wrote:
For the first time, a customer is asking me for root access to said
customer's servers.
Customer + root@server == !go; :-)
Obviously, I must comply. At the same time, I cannot continue be
accountable for those servers.
Fully correct. Check
On 29/12/2011 09:01, Irk Ed wrote:
For the first time, a customer is asking me for root access to said
customer's servers.
Obviously, I must comply. At the same time, I cannot continue be
accountable for those servers.
Is this that simple and clear cut?
Assuming that I'll be asked to
On Mon, 19 Dec 2011, vijayamurugan.kalyanasunda...@emc.com wrote:
Hi Team,
Kindly let me know on the compatibility of Intel X520 Dual Port 10
Gigabit Ethernet PCIe Adaptor Card with Free BSD 8.2 OS.
I didn't see any answer to this - but we are interested in ANY 10
GB ethernet card for
I really appreciate that you all, Jerry, Polytropon and Chuck,
took your time to answer me. But I think some of you understood
paragraphs like individual-separated statements, that's why you
did not fully understand my question (my horrible English helps
too :-)).
Let's see if I can explain
On Thu, Dec 29, 2011 at 12:53 PM, Walter Alejandro Iglesias
roque...@gmail.com wrote:
So, unless I am missing some portupgrade option-feature, once
the port tree is updated I must compile all from source. The
opposite leads to dependencies issues.
portmaster -P
Yes, this will likely
On Thu, Dec 29, 2011 at 01:03:01PM -0600, Adam Vande More wrote:
That is the price you pay for updated software on FreeBSD.
OK, Adam. That's almost as expected.
--
Adam Vande More
Thanks to all.
Walter
___
Quoting Brian Seklecki (Mobile) r...@probikesllc.com:
Also, what MAC address does the DHCPREQUEST packet appear to be sourced
from (from the view of your DHCP server, or on the wire somewhere
between the two (SPAN PORT)) ~BAS
How do I do that? :)
James
-Original Message-
From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-
questi...@freebsd.org] On Behalf Of ja...@colannino.org
Sent: Thursday, December 29, 2011 9:21 AM
To: freebsd-questions@freebsd.org
Subject: Re: Static IP on a Bridge
Quoting Matthew Seaman
On Thursday 29 December 2011, Damien Fleuriot wrote:
[snip]
sudo su - or sudo sh and the customer gets a native root shell
which does *not* log commands !
[snip]
Say the customer can sudo commands located in
/usr/local/libexec/CUSTOMER/
All he has to do is write a simple link to sh/bash,
-Original Message-
From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-
questi...@freebsd.org] On Behalf Of Polytropon
Sent: Thursday, December 29, 2011 9:58 AM
To: Carl Johnson
Cc: freebsd-questions@freebsd.org
Subject: Re: OT: Root access policy
On Thu, 29 Dec
On Thu, Dec 29, 2011 at 05:16:11PM +0100, Walter Alejandro Iglesias wrote:
Hi,
I am not expert on all this, but can give a couple of impressions.
Hello,
I am giving my firsts steps with FreeBSD.
Welcome to FreeBSD. It is a good system.
I've searched a lot in google, mailing list,
On 12/29/11 10:58 AM, Polytropon wrote:
On Thu, 29 Dec 2011 04:01:42 -0500, Irk Ed wrote:
For the first time, a customer is asking me for root access to said
customer's servers.
Customer + root@server == !go; :-)
Obviously, I must comply. At the same time, I cannot continue be
On Thu, 29 Dec 2011 11:23:31 +0100, Damien Fleuriot wrote:
On 12/29/11 10:58 AM, Polytropon wrote:
On Thu, 29 Dec 2011 04:01:42 -0500, Irk Ed wrote:
Obviously, I must comply. At the same time, I cannot continue be
accountable for those servers.
Fully correct. Check the contract you
On Dec 29, 2011, at 11:16 AM, Walter Alejandro Iglesias wrote:
I am giving my firsts steps with FreeBSD.
Greetings and welcome...
In a RELEASE fresh install, after updating the ports using i.e.
portsnap, the packages downloaded with pkp_add -r are older
versions respect their port
On Thu, Dec 29, 2011 at 5:58 AM, Scott Bennett benn...@cs.niu.edu wrote:
Did I misunderstand something about the --list-origins option? Or have
I run into a bug? Any suggestions of how to proceed would be welcome.
No, not a bug.
portmaster --list-origins | wc -l
58
pkg_info | wc -l
On Thu, Dec 29, 2011 at 10:01 AM, Irk Ed irked7...@gmail.com wrote:
For the first time, a customer is asking me for root access to said
customer's servers.
Are we talking about jail(8)- or server-level root access?
-cpghost.
--
Cordula's Web. http://www.cordula.ws/
On 29 Dec 2011, at 15:45, Daniel Feenberg wrote:
On Mon, 19 Dec 2011, vijayamurugan.kalyanasunda...@emc.com wrote:
Hi Team,
Kindly let me know on the compatibility of Intel X520 Dual Port 10 Gigabit
Ethernet PCIe Adaptor Card with Free BSD 8.2 OS.
I didn't see any answer to
On Thu, 29 Dec 2011 09:15:45 -0800, Carl Johnson wrote:
Damien Fleuriot m...@my.gd writes:
On 12/29/11 10:58 AM, Polytropon wrote:
On Thu, 29 Dec 2011 04:01:42 -0500, Irk Ed wrote:
For the first time, a customer is asking me for root access to said
customer's servers.
snip
Also, what MAC address does the DHCPREQUEST packet appear to be sourced
from (from the view of your DHCP server, or on the wire somewhere
between the two (SPAN PORT)) ~BAS
This sounds familar.
___
freebsd-questions@freebsd.org mailing list
Hello,
I am giving my firsts steps with FreeBSD.
I've searched a lot in google, mailing list, forums, freebsd
handbook and I am still not clear about the following.
In a RELEASE fresh install, after updating the ports using i.e.
portsnap, the packages downloaded with pkp_add -r are older
Damien Fleuriot m...@my.gd writes:
On 12/29/11 10:58 AM, Polytropon wrote:
On Thu, 29 Dec 2011 04:01:42 -0500, Irk Ed wrote:
For the first time, a customer is asking me for root access to said
customer's servers.
snip
Assuming that I'll be asked to continue administering said servers, I
On Thu, 29 Dec 2011 17:16:11 +0100, Walter Alejandro Iglesias wrote:
Hello,
I am giving my firsts steps with FreeBSD.
I've searched a lot in google, mailing list, forums, freebsd
handbook and I am still not clear about the following.
In a RELEASE fresh install, after updating the ports
On Dec 29, 2011, at 4:01 AM, Irk Ed wrote:
For the first time, a customer is asking me for root access to said
customer's servers.
Obviously, I must comply. At the same time, I cannot continue be
accountable for those servers.
Is this that simple and clear cut?
Assuming that I'll be
On Tue, 27 Dec 2011, Mark Felder wrote:
Are you sure that the problem isn't just that the current releases of FreeBSD
don't have GEM/KMS support which the newer Intel drivers require? I'm running
a test build on my Google CR48 and have OpenGL acceleration without any major
hiccups except
Quoting Matthew Seaman m.sea...@infracaninophile.co.uk:
What's the error message you see when you fail to ping out?
ping: cannot resolve google.com: Host name lookup failure
What does the routing table (netstat -r) look like before and after DHCP?
Before DHCP:
Routing tables
Internet:
On Wed, December 28, 2011 12:18, James Edwards wrote:
There are four disks, all in a single storage pool - tank.
Here is the naming convention I planned on following after 9.0 is
released:
tank/9.0
tank/9.0/usr
tank/9.0/var
tank/9.0/tmp
and so on
This way, in theory at least, when 9.1
Hi,
What is the required configuration in a FreeBSD 8.2 release host for it to
publish its name in a dynamic dns supported network?
LINUX: For a Linux host with name x.y.z.com I had to do the following:
=
# echo DHCP_HOSTNAME=x; /etc/sysconfig/network-scripts/ifcfg-eth0
# echo PEERDNS=no
On 29/12/2011 20:11, akshay sreeramoju wrote:
What is the required configuration in a FreeBSD 8.2 release host for it to
publish its name in a dynamic dns supported network?
Something like this in /etc/dhclient.conf:
interface em0 {
send host-name foo.example.com;
}
See
I feel really inferior to the community here, but I have to ask because I
simply don't know:
What do I need to do to create a small (3 PC-BSD) home network? I could do
this in no time in Windows, but I don't know how to find, configure, and
enable the files necessary to make these machines talk
Thanks Matthew. It works.
Akshay
On Thu, Dec 29, 2011 at 1:14 PM, Matthew Seaman
m.sea...@infracaninophile.co.uk wrote:
On 29/12/2011 20:11, akshay sreeramoju wrote:
What is the required configuration in a FreeBSD 8.2 release host for it
to
publish its name in a dynamic dns supported
On Thu, 29 Dec 2011 15:06:17 -0600
Jeffrey McFadden junkrigsai...@gmail.com wrote:
I feel really inferior to the community here, but I have to ask because I
simply don't know:
What do I need to do to create a small (3 PC-BSD) home network? I could do
this in no time in Windows, but I don't
On 29 Dec 2011, at 22:06, Jeffrey McFadden junkrigsai...@gmail.com wrote:
I feel really inferior to the community here, but I have to ask because I
simply don't know:
What do I need to do to create a small (3 PC-BSD) home network? I could do
this in no time in Windows, but I don't know
On 12/30/11 08:06, akshay sreeramoju wrote:
Thanks Matthew. It works.
Akshay
On Thu, Dec 29, 2011 at 1:14 PM, Matthew Seaman
m.sea...@infracaninophile.co.uk wrote:
On 29/12/2011 20:11, akshay sreeramoju wrote:
What is the required configuration in a FreeBSD 8.2 release host for it
to
On 12/29/11 12:45, Kevin Wilcox wrote:
On Dec 28, 2011 9:26 PM, Victor Sudakovv...@mpeks.tomsk.su wrote:
And the reason for the whole thread. One of the customers told me that
8.8.8.8 is faster than our own DNS servers which are located on the
same 100 MBit/s LAN with them. I was shocked but
On Thu, Dec 29, 2011 at 03:06:17PM -0600, Jeffrey McFadden wrote:
I feel really inferior to the community here, but I have to ask because I
simply don't know:
What do I need to do to create a small (3 PC-BSD) home network? I could do
this in no time in Windows, but I don't know how to find,
I have had an interest in studying the FreeBSD kernel and getting to know
its internals better. After all, in Open source projects, they say,
community contributions are important.
However, My finding is that due to poor documentation, the FreeBSD kernel
is nearly impenetrable to an outsider. I
Quoting Devin Teske devin.te...@fisglobal.com:
Add the following line (exactly as it appears) to /etc/rc.conf:
defaultrouter=192.168.1.1
That line's been there the whole time. Hasn't helped :(
James
___
freebsd-questions@freebsd.org mailing
From owner-freebsd-questi...@freebsd.org Thu Dec 29 21:46:36 2011
Date: Thu, 29 Dec 2011 22:43:16 -0500
From: David Jackson djackson...@gmail.com
To: freebsd-questions@freebsd.org
Subject: FreeBSD Kernel Internals Documentation
I have had an interest in studying the FreeBSD kernel and
Quoting Devin Teske devin.te...@fisglobal.com:
Add the following line (exactly as it appears) to /etc/rc.conf:
defaultrouter=192.168.1.1
I should probably re-port my original configuration:
cloned_interfaces=bridge0 tap0 tap1
ifconfig_bridge0=addm re0 addm tap0 addm tap1 up inet 192.168.1.6
On Thu, 29 Dec 2011 22:43:16 -0500, David Jackson wrote:
However, My finding is that due to poor documentation, [...]
That kind of statement doesn't fit well to FreeBSD
which is known for its excellent documentation, often
considered superior to other open source projects.
[...] the FreeBSD
On 12/29/2011 09:21 AM, ja...@colannino.org wrote:
Quoting Matthew Seaman m.sea...@infracaninophile.co.uk:
What's the error message you see when you fail to ping out?
ping: cannot resolve google.com: Host name lookup failure
It seems that you are currently receiving your resolver from DHCP
I have run a lot of different FreeBSD systems off (fileservers, firewalls,
routers, etc.) off of compact flash cards[1] and have never had a CF part fail.
Most of these were read-only mode, but some of them were left mounted 'rw' for
years (with no swapping, of course). The bottom line is,
49 matches
Mail list logo
