On Apr 13, 2012, at 4:58 PM, Mark Felder wrote:
On Fri, 13 Apr 2012 15:53:49 -0500, Chad Leigh Shire.Net LLC c...@shire.net
wrote:
No NAT needed since they share the network stack under Jails v1 they share
the routing tables. It works. Try it.
You're clearly exploiting a bug in
Hi,
I have a system that successfully booted from system/ROOT/default,
but now failed with system/ROOT/nch (other ROOT installation),
it ends with ERROR 2, what does ERROR 2 means?
Its 9.0-RELEASE.
Reagads and thanks in advance,
vermaden
...
I forgot to attach the screenshot from KVM ...
http://ompldr.org/vZGRxeg
Regards,
vermaden
vermaden verma...@interia.pl pisze:
Hi,
I have a system that successfully booted from system/ROOT/default,
but now failed with system/ROOT/nch (other ROOT installation),
it ends with ERROR 2, what
On 15/04/2012 10:23, vermaden wrote:
I have a system that successfully booted from system/ROOT/default,
but now failed with system/ROOT/nch (other ROOT installation),
it ends with ERROR 2, what does ERROR 2 means?
Setting up for use with boot environments? Can you describe how you did
this,
I've just got FreeBSD 9.0-RELEASE on HP Pavillion dv4.
When I found the internal wireless adapter (Broadcom BCM4322) is not
supported, I decided to use the usb wireless adapter (Planex
GW-USMicroN) which is listed on
http://www.freebsd.org/releases/9.0R/hardware.html
then I configed the several
Hi, thanks for fast response, here is the recipe I used ...
Matthew Seaman matt...@freebsd.org pisze:
On 15/04/2012 10:23, vermaden wrote:
I have a system that successfully booted from system/ROOT/default,
but now failed with system/ROOT/nch (other ROOT installation),
it ends with ERROR 2,
On 13 Apr 2012 at 23:51, Frank Staals wrote:
John McDonnell gorgar...@ymail.com writes:
All in all, creating an entry in Site Manager makes more sense if
it's something you connect to from your own hardware. From someone
else's machine, the quick connect is quite handy though.
Don't
Hi,
have you tried to unplug the device and put it back in?
Erich
On Sunday 15 April 2012 18:54:20 fake fake wrote:
I've just got FreeBSD 9.0-RELEASE on HP Pavillion dv4.
When I found the internal wireless adapter (Broadcom BCM4322) is not
supported, I decided to use the usb wireless adapter
Yes, I did.
Here is the result.
when it plugged out,
# ugen2.2: Ralink at usbus2 (disconnected)
run0: uhub2, port2, addr2 (disconnected)
when it plugged in again,
# ugen2.2: Ralink at usbus2
run0: 1.0 on usbus2
run0: MAC/BBP RT3370 (rev 0x0201), RF RT3020 (MINO 1T1R), address
XX:XX:XX:XX:XX:XX
Running 9.0 as a gateway host with pf firewall enabled.
FTP is launched by inetd.
Both active and passive ftp works from lan pc's to the host ftp.
The lan ftp session can be initiated from the host or any lan pc and
things work because there are no rules on the lan interface except
single pass
Chris Whitehouse cwhi...@onetel.com writes:
On 10/04/2012 23:47, Kendall Shaw wrote:
Chris Whitehousecwhi...@onetel.com writes:
On 10/04/2012 18:37, Kendall Shaw wrote:
Do you happen to know of a PCMCIA Type II wireless adapter that is
currently being sold online that supports WPA under
In freebsd-questions Digest, Vol 410, Issue 12, Message: 2
On Sat, 14 Apr 2012 10:51:36 -0500 (CDT)
Robert Bonomi bon...@mail.r-bonomi.com wrote:
| Ron rg.li...@rzweb.com wrote:
OK, I found the problem. It was the hostname not being set correctly.
What threw me was that it was correct in
Kendall Shaw ks...@kendallshaw.com writes:
Chris Whitehouse cwhi...@onetel.com writes:
On 10/04/2012 23:47, Kendall Shaw wrote:
Chris Whitehousecwhi...@onetel.com writes:
On 10/04/2012 18:37, Kendall Shaw wrote:
Do you happen to know of a PCMCIA Type II wireless adapter that is
Hello list!
I have an external HDD connected with usb from dmesg i get this
umass0: Generic External, class 0/0, rev 2.00/2.10, addr 4 on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:7:0:-1: Attached to scbus7
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: Generic External
On Apr 14, 2012, at 2:19 PM, Mark Felder wrote:
On Sat, 14 Apr 2012 14:59:47 -0500, fb...@a1poweruser.com wrote:
I don't see any v2 in the jail environment. Vimage is a separate software
module that is not part of the the system base release. It has to be
compiled into a custom kernel to
Hi,
On Sunday 15 April 2012 21:44:11 fake fake wrote:
Yes, I did.
Here is the result.
when it plugged out,
# ugen2.2: Ralink at usbus2 (disconnected)
run0: uhub2, port2, addr2 (disconnected)
when it plugged in again,
# ugen2.2: Ralink at usbus2
run0: 1.0 on usbus2
run0: MAC/BBP
Fbsd8 wrote:
Running 9.0 as a gateway host with pf firewall enabled.
FTP is launched by inetd.
Both active and passive ftp works from lan pc's to the host ftp.
The lan ftp session can be initiated from the host or any lan pc and
things work because there are no rules on the lan interface except
17 matches
Mail list logo
