Dear list,
Has anyone ever succeeded to run a tinderbox in a jail who is willing to
elaborate on the configuration because it's driving me NUTS. Happy to do that
off-list and summarise later on.
Looks like neither NFS nor nullfs mounts would work in a jail which is breaking
tinderbox builds.
Hi there,
I could need a quick hand from someone with apache22 and maybe apache-in-a-jail
experience.
I want to set up locally apache22 on a given IP (it's in a jail here) and use
files for name service. nsswitch.conf does this per default so files take
precedence -- if resolution worked that
Hi Chuck,
Thanks for the response.
Or is it still worthwhile to consider hardware accelerators such as the
ones guys like soekris [1] and others offer? Does anyone have an idea how
much such an accelerator may help on older vs. on newer hardware?
Something like a 1GHz P3 or equivalent can
Hi Matthew,
Thanks for the response.
NAT. Doing serious crypto slows things up somewhat.
I've been pondering this since a while but thought that crypto
engines on modern hardware would make 'extra' hardware accelerators
obsolete?
Yes -- in many use cases this is true. Modern
Hi Matthew,
And a hardware crypto device will level HTTPS to the HTTP volume
without it?
Probably. The usual approach with HTTPS once traffic levels get big
enough is crypto-offload. You use a separate device as the crypto
endpoint: typically built into a load balancer. You can do
Re.
lest I forget.
(...) I now will build
world kernel and hope that it'll come out fine.
And so it did.
kldxref /boot/kernel
The kernel runs now. So back to my ezjails.
Thanks to all,
Rgds.,
Peter.
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter
Hi,
NAT. Doing serious crypto slows things up somewhat.
I've been pondering this since a while but thought that crypto engines on
modern hardware would make 'extra' hardware accelerators obsolete?
Or is it still worthwhile to consider hardware accelerators such as the ones
guys like soekris
Re...
Can you build GENERIC?
Yes.
However.
I just diff'ed against GENERIC, switched any option on/off that was different
to GENERIC, without any change. Finally,
[r...@netserv /usr/src/sys/i386/conf]# mv NETSERV NETSERV.bakk
[r...@netserv /usr/src/sys/i386/conf]# cp -p GENERIC NETSERV
Dear list,
This probably is obvious but I don't seem to be able to figure out where I
should look in order to learn why I can't compile the bloomin' kernel, pse see
below.
Every time I update my KERNCONF, I try to remember to keep a copy of GENERIC so
I can diff against the updated one. This
Estimado Jorge,
do the makebuildworld first.
That's odd - I even *installed* world without any issue?
Will try now anyways, though. Life's a mystery.
Gracias por apoyar,
Saludos cordiales,
Peter.
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter
Re.
do the makebuildworld first.
That's odd - I even *installed* world without any issue?
Will try now anyways, though. Life's a mystery.
Nope, no change.
Any other ideas?
Thanks,
Peter.
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter
Hi,
Are these lock order reversals reported any reason for preoccupation and/or
should I report elsewhere?
The kernel I just built does not boot at all, so I don´t know whether these are
a closed issue already. I´m off for a couple of days and will retry then.
Thanks regards,
Peter.
---
Hi,
So, I've been wondering about something. FreeBSD is a general purpose
operating system, even though it has historically only heavily been used
on
servers. Why is it that FreeBSD doesn't provide a desktop installation,
something similar to say Debian's option of Standard Desktop? For
Hi,
When I am logged in as a non-root user and I try to become root by
entering su and typing the root password, the resulting bash prompt
does not reflect the contents of /root/.bash_profile
Because .bash_profile is only seen on login, not on 'su'. Put
it in .bashrc which is read when
Dear list,
Now, there, we've got setfib(1). Very well. But -- how do I figure out the FIB
associated with a running process?
Thanks,
Peter.
---
[1] setfib(1), cf.
http://www.freebsd.org/cgi/man.cgi?query=setfibsektion=1apropos=0manpath=FreeBSD+8-current
--
Pt! Schon vom neuen GMX
Now, it is my suspicion that the apparent need for promisc at the router
end indeed is an apperent one and not really the router's fault but rather
the other end's. The other end, in this case, is the server below.
If the server, with its single MIB, default-routes its packets through one
Hiya Nikos, re list,
Hm, the promiscuous mode must be needed for the vlan driver.
But you don't have to set it.
It does not work without, at the router end. Suspicions, please see below.
I can't think of any implication in a switched ethernet environment.
It is just that every frame
Hi,
I think that if it is hardware RAID, you should see only one disk.
My Promise controller does have my disks show up as ar0 -- but the disks are
there as individuals (ad*) as well, and accessible (though I only use ar0*, for
hopefully obvious reasons).
At least, that's what I saw last
have another dig into my junk box
but so far I only got PCI out of it (and the G200 has AGP, dunno if that makes
*the* difference though ;-)).
Alright, then,
Thanks a lot, and
All the best,
Peter.
--
Peter Cornelius p...@gmx.net - Karlsruhe DE
Pt! Schon vom neuen GMX MultiMessenger
Re...
Flash disks are no big deal, especially if they will already be inserted
at boot time.
I take it that the atom CPU just works, right?
Regarding the WindPC 2713 (if that's the one you look at), I am not even sure
whether there is a WLAN card in it at all (the Wind U100X netbook
Hiya, re...
The 1.4.9 version of mga may work. I'd give portdowngrade instructions
for it, but the anoncvs server isn't answering.
I did eye that, funny you say so. I found on some X.org repository that
1.4.9 was considerably 'younger' than 1.9.100. I may (might) have a look at
it
Dear all,
While I'm at it, I don't seem to be able to get my head around some networking
items I observed (currently only vlan(4), not ng_vlan(4), if that makes a
difference):
- On my router, why do I have to set the base interface to promiscuous mode in
order to get packets from/to my vlans
Dear all,
I have an odd Xorg error with a Matrox G200 card here. I have googled for it
but only found dual-head installations, plus comments that it allegedly is
fixed with the new FreeBSD Xorg 1.5.3 ports.
However, as I still see the error, I poked about and could not find much of the
Hi Stefan,
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/Latest/xorg.tbz
You may miss a 'All' in there, try something like fetch
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/Latest/All/xorg-7.4.tbz
Regards,
Peter.
---
ftp ls All/*xorg*
229 Entering
Yes, clearly web browsers should be optimized for speed of exiting.
Oh, yes, definitely.
But, honestly, a marginally minor resource footprint would not be bad, either.
But I've got a certain feeling that this thread'll go to advocacy sooner or
later :)
Regards,
Peter.
--
Nur bis 16.03.!
On Tue Sep 2 14:01:06 UTC 2008 Kirk Strauser wrote:
On Sunday 31 August 2008 18:03:53 Lloyd M Caldwell wrote:
I needed to increase the size of my freebsd root (/). I booted,
single
user, attached a large usb freebsd formatted file system to receive
the
backup image.
And you're sure
[follow-ups please to FreeBSD-Multimedia and Cc: to me, for the time being.
- Thanks!]
Hi there,
I have started to fiddle with a program called nvtv which supposedly makes
the tv-out
on my graphics card work (an nVidia Corporation NV20 [GeForce3 Ti200]), and
possibly
some other
# [EMAIL PROTECTED] / 2003-10-19 01:59:45 +0200:
I'm hacking at a piece of code that I want to turn into a port. It's
from
Linux and uses libpci and some other 'strange' functions.
While I think that I've managed to modify the libpci port to install
the
required lib, I'm more or
Hi there,
I'm hacking at a piece of code that I want to turn into a port. It's from
Linux and uses libpci and some other 'strange' functions.
While I think that I've managed to modify the libpci port to install the
required lib, I'm more or less lost at getopt_long() which I
assume is in the
29 matches
Mail list logo