On 09/18/2013 7:44 am, RW wrote:
On Tue, 17 Sep 2013 19:22:30 -0400
Andre Goree wrote:
Hey list,
I have a disk that was at one time part of a GPT/GELI configuration
and thus, had a passphrase attached to it.
I've since reformatted that disk and am using it for another purpose,
but the system
)
Sectorsize: 512
Stripesize: 4096
Stripeoffset: 0
Mode: r1w1e2
--
Andre Goree
-=-=-=-=-=-
Email - andre at drenet.net
Website - http://www.drenet.net
PGP key - http://www.drenet.net/0x83ADAAAB.asc
-=-=-=-=-=-
___
freebsd-questions
UHS 00lo0
I can ping 192.168.2.0/24 and ONLY 192.168.1.250.
I need ping 192.168.1.0/24 lan but I can only see 192.168.1.250
any idea?
thanks!
Pol
I'm pretty sure you need a route on server2 to 192.168.1.0/24.
Try:
route add 192.168.1.0/24 192.168.2.250
--
Andre
and '10.0.0.98' is the LAN interface of the openvpn server.
If you don't mind could you post the output of ifconfig from both boxes?
--
Andre Goree
-=-=-=-=-=-
Email - an...@drenet.net
Website - http://blog.drenet.net
PGP key - http://www.drenet.net/0x83ADAAAB.asc
net.inet.ip.forwarding
net.inet.ip.forwarding: 1
root@daemon ~ #
--
Andre Goree
-=-=-=-=-=-
Email - an...@drenet.net
Website - http://blog.drenet.net
PGP key - http://www.drenet.net/0x83ADAAAB.asc
-=-=-=-=-=-
___
freebsd-questions@freebsd.org
for even bringing it up! I've been waiting for this
update. Glad someone was more meticulous at watching freshports than I
was :)
--
Andre Goree
an...@drenet.info
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
On Sat, 30 Mar 2013 08:56:12 -0400, Lowell Gilbert
freebsd-questions-lo...@be-well.ilk.org wrote:
Andre Goree an...@drenet.info writes:
I seem to have to run 'make index' in /usr/ports after I've run 'svn up
/usr/ports' in order to see which ports need to be updated using
'portversion
On Fri, 29 Mar 2013 21:52:41 -0400, Damien Fleuriot m...@my.gd wrote:
On 29 March 2013 22:29, Andre Goree an...@drenet.info wrote:
I seem to have to run 'make index' in /usr/ports after I've run 'svn up
/usr/ports' in order to see which ports need to be updated using
'portversion
sure I've read about the correct way to do so,
but it doesn't appear to be here:
https://wiki.freebsd.org/PortsSubversionPrimer
Thanks in advance for any advice.
--
Andre Goree
an...@drenet.info
___
freebsd-questions@freebsd.org mailing list
http
on
FreeBSD's openjdk. Is it possible to run these two alongside each other?
--
Andre Goree
an...@drenet.info
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd
On Wed, 13 Mar 2013 17:43:40 -0400, Damien Fleuriot m...@my.gd wrote:
On 13 Mar 2013, at 22:26, Andre Goree an...@drenet.info wrote:
I seem to be having trouble building my custom kernel. I've removed
several things that I believe were unnecessary, and added Linux
support, but I don't
Here is my KERNCONF:
http://www.drenet.net/BUILD130313
I've also created a diff of what's missing from my configuration compared
to GENERIC:
http://www.drenet.net/kern_diff.txt
Thanks in advance for any guidance you can provide!
--
Andre Goree
an...@drenet.info
On 02/23/2013 07:04 PM, ill...@gmail.com wrote:
On 22 February 2013 18:56, Andre Goree an...@drenet.info wrote:
cc1: warnings being treated as errors
Need to set NO_WERROR perhaps?
Thanks for the suggestion, though it did not help. This turned out to
be user error (i.e. a failed patch
spot :(
Thanks in advance for any guidance you can provide.
[1]http://www.drenet.net/images/BUILD011313.txt
--
Andre Goree
an...@drenet.info
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
' returns no results, even with
'-s' option, so I'm assuming this is my only recourse to get gpgsm
installed...
--
Andre Goree
an...@drenet.info
signature.asc
Description: OpenPGP digital signature
On 02/03/13 08:06, Schaich Alonso wrote:
On 2013-02-03, 07:51, Andre Goree wrote:
I'm having an issue with tmux on certain ssh connections. When I
connect to my freebsd server's tmux session that has multiple panes in
one window, everything looks fine. However, when I connect to my linux
on how I can fix this? Really just an annoyance rather than a
real issue, but I'm sure someone has come across this before and fixed
it. Googling wasn't much help -- though I did find some solutions, they
did not work for me.
[1]http://www.drenet.net/images/snapshot2.png
--
Andre Goree
On 02/02/13 12:30, Joshua Isom wrote:
On 2/2/2013 11:05 AM, Andre Goree wrote:
Thanks, I'm actually using bash as a shell, probably should've mentioned
that. Anywho:
[agoree@desktop ~]$ grep TERM .*
.bash_history:echo $TERM
.profile:# Setting TERM is normally done through /etc/ttys. Do
All of a sudden today Im having a very weird issue with my keyboards.
1. Pressing the ctrl key nets a single quotation mark
2. Pressing s nets s. (s followed by a period). Pressing period nets that
same s. combination
3. Pressing the quotation key does nothing.
Thats just what Ive come
On Sat, 12 Jan 2013 14:48:01 -0500, Andre Goree an...@drenet.info wrote:
All of a sudden today Im having a very weird issue with my keyboards.
1. Pressing the ctrl key nets a single quotation mark
2. Pressing s nets s. (s followed by a period). Pressing period nets
that same s. combination
file, if that matters.
Thanks for the suggestions, I'll let you know what turns up.
--
Andre Goree
an...@drenet.info
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
On 01/08/13 09:11, Trond Endrestøl wrote:
On Tue, 8 Jan 2013 09:05-0500, Andre Goree wrote:
On Tue, 08 Jan 2013 07:59:51 -0500, Dimitri Yioulos dyiou...@onpointfc.com
wrote:
Hope I'm not offending you if the following are things
you've tried as a matter-of-course:
After booting up
I'm not sure what's going on, as I've never had an issue like this in my
years of using FreeBSD nor Linux. Each time I login, my history file is
empty! I'm not sure what could be causing this, but below [1] is my
.bashrc. I had . ~/.bashrc in ~/.profile, but I removed it while I'm
On Sat, 03-Nov-2012 at 18:46:04 +0100, Mehmet Erol Sanliturk wrote:
On Sat, Nov 3, 2012 at 9:54 AM, Andre Albsmeier
andre.albsme...@siemens.commailto:andre.albsme...@siemens.com wrote:
For various reasons I have to use this disk layout:
One harddisk with MBR and 3 slices on a i386 box
On Sat, 03-Nov-2012 at 23:34:48 +0100, jb wrote:
Andre Albsmeier Andre.Albsmeier at siemens.com writes:
...
However, when pressing F3, the system of slice 2(!) is
loaded. This is due to the fact that boot1 always loads
the first active FreeBSD slice
3 without updating the MBR before?
Thanks,
-Andre
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Hello all. Wondering I can pick your brains regarding a situation I've
run into. I've followed this article on setting up my FreeBSD 9 install
on ZFS w/GELI encyrption -- sans the part about having 'bootdir' on a
mirror, which, sadly, likely would've saved me from my current problem:
On 05/26/2012 05:40 PM, Franci Nabalanci wrote:
I did use portmaster for KDE 4.8 update and it stopped:
The devel/kdebindings4-python port has been deleted: kdebindings ports have
been refactored.
Update aborted.
And I don't know how to save a problem.
Did you heed /usr/ports/UPDATING
On Tue, 08 May 2012 15:55:36 -0400, Jerry je...@seibercom.net wrote:
On Tue, 08 May 2012 15:34:02 +0100
Matthew Seaman articulated:
Sounds almost as if the my.cnf you've been editing is not the my.cnf
that your mysql instance is using. IIRC there was some talk about
moving from the usual
2012/2/7 Коньков Евгений kes-...@yandex.ru
# rm *
/bin/rm: Argument list too long.
in this directory about 25000 files,
but actually there is only one argument to rm it is '*' sign.
Why rm get list of all files in directore instead of deleting one by one?
the error when trying to compile.
[root@desktop kdelibs4]# pkg_info -xI qt3
qt4-qt3support-4.7.4 Qt3 compatibility library
I've also rebuilt a few other ports that I thought my have been the
culprit(devel/py-qt4-core, devel/py-sip), but to no avail. Any other
ideas or hints?
--
Andre Goree
) about it, I just started
using Opera. Figured it might be something to do with my install (I run
8.2-STABLE on a PC-BSD installation). I tried rebuilding the port,
downloading the pre-built package, etc...not sure what could be causing it.
Just wanted to chime in with me too, heh.
--
Andre
://forums.gentoo.org/viewtopic-p-6780342.html)
--
Andre Goree
an...@drenet.info
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
: http://www.mediafire.com/wine_fbsd64
--
Andre Goree
an...@drenet.info
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
appreciate any insight (if this message actually reaches the list,
that is). :)
Andre Goree
an...@drenet.info
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd
sources that I've since corrected,
and now all is working :)
Thanks for your input and to everyone else who helped.
On Fri, 01 Apr 2011 02:31:59 -0500, krad kra...@gmail.com wrote:
On 29 March 2011 10:05, Andre Goree an...@drenet.info wrote:
Thank you for responding.
For two reasons I
to
/boot/kernel.bad (or whatever) and replacing it with the previous kernel.
:(
On Tue, 29 Mar 2011 03:40:17 -0500, krad kra...@gmail.com wrote:
On 28 March 2011 10:37, Andre Goree an...@drenet.info wrote:
Hello,
Ever since I upgraded to 8.2 a few weeks ago, I can't seem to rebuild my
kernel
rebuilt the kernel without rebuilding
world, however the same thing happens even after getting up-to-date
sources and rebuilding world. Anyone else having this problem?
Thanks in advance.
Andre Goree
an...@drenet.info
___
freebsd-questions@freebsd.org
I was looking at encrypting my data on a headless server I have, and found a
good tutorial using ZFS+geli. Easy enough to setup, but one thing I just
realized is that I wouldn't be able to enter the passphrase on the server
since I keep it headless.
I wonder if there is some type of encryption I
63
-Andre
We are going to use FreeBSD 8.0 and Bacula, but first we obviously need to
create a working RAID.
My questions are:
- Are HighPoint RocketRaid controllers a good alternative to 3ware
controllers? Are RocketRaid controllers true hardware RAID?
- What should we look
On Fri, 04-Sep-2009 at 20:43:21 +0200, Andre Albsmeier wrote:
On Thu, 16-Apr-2009 at 18:00:26 +, lyd mc wrote:
Hi guys,
Why Freebsd built-in vacation program (/usr/bin/vacation) does not auto
reply?
I am using fresh installed Freebsd7.0 and 7.1. here is my configs.
Did you
[Please do not topquote]
On Tue, 08-Sep-2009 at 05:19:53 +, lyd mc wrote:
Hi Andre,
I haven't solve it yet. I use the one in the ports tree
(/usr/ports/mail/vacation) as my work around.
Now I use sieve script for vacation notice.
Do you have a patch? May be I can use
to a really strange compiler bug...
-Andre
Under the home directory of the user (alydio.mc)
.forward
??? \alydio.mc, |/usr/bin/vacation alydio.mc
.vacation.msg
?? Subject: On vacation message
?? From: alydio...@mydomain.com
?? I'm on vacation and will not be reading my mail
: TOSHIBA CD-ROM XM-6201TA 1400 Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da0s1a
Thanks,
-Andre
On Thu, 21-May-2009 at 08:44:00 -0400, Michael Powell wrote:
Andre Albsmeier wrote:
Hi,
found this old P2B-D board with two 1GHz CPUs and don't want
to throw it away ;-)
Has anyone got it running with ACPI and without the interrupt
storm on irq20? Judging from old mailing list
IMPORTANT INFORMATION!
This is an automated message.
The message you sent (attached below) requires confirmation
before it can be delivered. To confirm that you sent the
message below, just hit the Reply button and send this
message back (you don't need to edit anything). Once this is
done,
IMPORTANT INFORMATION!
This is an automated message.
The message you sent (attached below) requires confirmation
before it can be delivered. To confirm that you sent the
message below, just hit the Reply button and send this
message back (you don't need to edit anything). Once this is
done,
Good morning,
I'm writring, to know information about FreeBSD (as it was your university
that developed it), i'd like to know what is the network's architecture and
the operating system's architecture,know how they communicate between each
layer, and finally to know how the data are transmitted
Good morning,
I'm writring, to know information about FreeBSD (as it was your university
that developed it), i'd like to know what is the network's architecture and
the operating system's architecture,know how they communicate between each
layer, and finally to know how the data are transmitted
I need to monitor traffic from my network to the internet, I then need
to charge each user (preferably username and password authentication)
for the amount of data used.
Can FreeBSD do this?
Hope to hear from you soon
Andre
___
freebsd-questions
in the official
channel, #xen on irc.oftc.net.
Andy
/* Andre Guibert de Bruet * 6f43 6564 7020 656f 2e74 4220 7469 6a20 */
/* Code poet / Sysadmin * 636f 656b 2e79 5320 7379 6461 696d 2e6e */
/* GSM: +1 734 846 8758 * 5520 494e 2058 6c73 7565 6874 002e */
/* WWW
Dear,
Is there any experience successful Install FreeBSD in HP Integrity rx2600, is
there any problem when using FreeBSD ia64?
How to know/check that the system OS or application can running pure in 64bit?
can FreeBSD ia64 running pure 64bit ?
Thanks,
Andre
Dear,
How to make sysinstall menu in xterm have origin color (blue yellow) not black
and white.
I read a termcap and xterm-color but i could't understand (sorry im newbie)
Thank U
Andre
-
Find local movie times and trailers on Yahoo! Movies
a recent fw on your DLT4k? My DLTs
used to behave badly with early fw revisions. Check out
http://www.quantum.com/am/service_support/downloads/software/dlt4000.htm
You can upgrade it by tape or use my software for updating the fw of
SCSI devices on FreeBSD.
-Andre
James Smallacombe
(Abort trap) ---
--- SIGABRT (Abort trap) ---
gruss/regards
Andre
--
And some greetings from the Toaster
Plata Verata Nectu
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
the system posts, will likely
yield a Mhz guestimate much closer to what you were expecting.
Regards,
Andy
| Andre Guibert de Bruet | Enterprise Software Consultant
| Silicon Landmark, LLC. | http://siliconlandmark.com/
___
[EMAIL PROTECTED] mailing list
On Fri, 18 Jun 2004, Andre Rein wrote:
I'm able to ping 10.0.0.1 now from my vpnclient and ping the
vpnclient from 10.0.0.1 without any trouble.
The only problem I get, is to ping the vpnclient from the vpnserver.
It won't work.
So how should I setup the server to ping the client?
Am I
to ping 10.0.0.1 now from my vpnclient and ping the
vpnclient from 10.0.0.1 without any trouble.
The only problem I get, is to ping the vpnclient from the vpnserver.
It won't work.
So how should I setup the server to ping the client?
Am I just blind and don't see my mistake?
gruss/regards
Andre
://www.freebsd.org/cgi/query-pr.cgi?pr=66324
Andre
__
Do you Yahoo!?
Yahoo! Movies - Buy advance tickets for 'Shrek 2'
http://movies.yahoo.com/showtimes/movie?mid=1808405861
___
[EMAIL PROTECTED
predictable, configurable, and debuggableswitch to
ipfilter and ipnat. You'll find yourself very much in control over your
firewall/nat environment.
Andre
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
-post, it's almost always not necessary.
Regards,
Andy
Andre Guibert de Bruet | Enterprise Software Consultant
Silicon Landmark, LLC. | http://siliconlandmark.com/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
Why would a script not run? I have a script in /usr/local/etc/rc.d, I
did chmod +x it, but it still does not run at startup.
Maybe I should re-install! :P
Andre
Lowell Gilbert wrote:
*This message was transferred with a trial version of CommuniGate(tm) Pro*
David Bear [EMAIL PROTECTED] writes
have put it in /usr/local/etc/rc.d/ . But that is minor for now.
What have I done incorrectly and what else do i still need to do?
Thanks
Andre
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
Hi
i accidently deleted the user www and now my apache doesnt start. is there a fast
way to solve this problem?
im learning mysql/php and need to have my apache up and running as soon as possible,
and i dont want to reinstall apache from ports, because if i do so i need to bring my
friends
yet succeeds manually.
Any Ideas?
Multiple mounts for a mountpoint is considered foot-shooting. Either:
a) Mount /home off of NFSD:/home2.
b) Mount NFSD:/home2 somewhere else.
Regards,
Andre Guibert de Bruet | Enterprise Software Consultant
Silicon Landmark, LLC. | http://siliconlandmark.com
Hi there people!
I have setup a FreeBSD box with Mysql,apache+mod_php
for practical purposes, when i want to update the webpages
on the FreeBSD machine i found it very hard to first use FTP
to transfer the pages from my windows machine, and then SSH in to the FreeBSD machine
and move the files
Hi there people!
I have setup a FreeBSD box with Mysql,apache+mod_php
for practical purposes, when i want to update the webpages
on the FreeBSD machine i found it very hard to first use FTP
to transfer the pages from my windows machine, and then SSH in to the FreeBSD machine
and move the files
Hi there people!
I have setup a FreeBSD box with Mysql,apache+mod_php
for practical purposes, when i want to update the webpages
on the FreeBSD machine i found it very hard to first use FTP
to transfer the pages from my windows machine, and then SSH in to the FreeBSD machine
and move the files
Does bind support a native IPv6 root server??
Thanks
_
Instituto Politecnico da Guarda
Stay alive [emcocktl.gif]
Tiago André
_
MSN
Hi there,
Iám trying to configure a dns bind by editing the named.conf like
this:
zone ip6.ipg.pt {
type master;
file ip6.ipg.pt.db;
check-names fail;
allow-update { none; };
allow-transfer { any; };
allow-query { any; };
also-notify { };
};
zone
Hello there,
I was working nice in my freebsd4.7 and make a halt comand, when then
system reboot
the startx cant be lanch and apper this error:
-(EE) R128(0): No DFP detected
-(EE) R128(0): [dri] R128DRIScreenInit failed (depth 8 not supported).
[dri] Disabling DRI.
Hi there,
iam new in the unix world...
I already dowload the mozilla-i386-unknown-freebsd4.7.tar.gz to my
freebsd pc
now what such i do now??? to install it???
This suport ipv6, isnt it??
thanks,
Tiago Camilo
Hello there,
iam not shure this is the place, but i have a problem
I have a freebsd 4.7 Pc where i want to install the blind
i already make the download of bind-9.2.2.tar.gz
to a new directory
and make: gunzip bind-9.2.2.tar.gz | tar xvf -
and make (in the some
hello there
iam trying to configure a router that make a ipv6/ipv4 tunnel.
now i have a freebsd 4.0 pc on ipv4 public ip
what have i do to make my router ipv6/ipv4 to connect my ipv6 network, to
internet?
i alredy have a ipv6 address 3ffe:31ff:0:::83 ,begin, and end point
Hi there
iam trying to establish a tunnnel ip6 on my pc..
but when i try to
#route add -inte6 default -interface gif0
it gave me this
route: writing to routing socket: File exists
add net default: gateway gif0: File exists
What does it means??
And when i try to
ping6 3ffe:31ff:0:::82
that
How do i compile my rc.conf file?
whidout restar the pc
thanks
_
MSN Oscar: tem um palpite de quem vai ganhar?
http://www.msn.com.br/oscar/enquete/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions
needed for TV-Out support on the G400-DH.
-Andre
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
How do i compile my rc.conf
Thanks
Tiago Camilo
_
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
Hi there,
iam trying to configure a tunnel ipv6 over ipv4
i try:
ifconfig gif0 create
ifconfig gif0 tunnel 193.137.232.35 193.136.2.2
ifconfig gif0 inet6 alias 3ffe:31ff:0:::83/127
then i try to see if the tunnel is working and do:
ping6 ff02::1%gif0
and insted of giving me two replies i
to a new file and unlink the
old one. The problem is that I don't have a lot of time
to do this so I am looking for something like ftruncate()
but for the beginning...
Any ideas?
Thanks,
-Andre
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body
On Fri, 13-Dec-2002 at 08:15:22 -0500, Gerald T. Freymann wrote:
On Fri, 13 Dec 2002, Andre Albsmeier wrote:
Are there any special features in FreeBSD that I can use
to truncate a file in the beginning?
Sure.
man split
should do it!
Don't think so... from the split manpage
On Fri, 13-Dec-2002 at 05:41:41 -0800, David Schultz wrote:
Thus spake Andre Albsmeier [EMAIL PROTECTED]:
Are there any special features in FreeBSD that I can use
to truncate a file in the beginning?
Let's assume I have a 50GB file. Only the last 10GB are
interesting for me and I have
Hello there...
I've the last version of freebsd...
But i cant find the file
/etc/resolv.conf
Why?
Tiago Camilo
_
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail
To
Hi..
Whats the meean of the mesage:
ping6:sendmsg:NO route to host
Tiago Camilo
_
The new MSN 8: smart spam protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail
To Unsubscribe: send mail to [EMAIL
Hello there again...
I'am trying to configure a ipv6 router in my hnome net...
I've put a host whid two ethernet card but i'am having trouble whid one of
the interface. I can ping6 from the xl0 but not from xl1, why?
The problem is not from the cards..
And i think that the configuration is
thanks Akifyev Sergey ,
Hello there again...
Hi!
I'am trying to configure a ipv6 router in my hnome net...
Do you _really_ need IPv6 at home? I just wonder why... ;)
its a kind of tests
I've put a host whid two ethernet card but i'am having trouble whid one
of
the interface. I can
to automatically mount every smbfs in there.
However, IMO, the ideal solution would be to teach amd about smbfs
but I don't know enough about amd :-( Maybe one day I will have
time to dig into this...
-Andre
Can you tell me how do you mount your shares at boot time? or at least
can i see your
Hello there...
iam trying to configure my little net ipv6, by
ifconfig xl0 inet6 ::::1
and it work fine (using ping6), but the problem is when i restar my machine,
i have to do all again (ifconfig), i already try to change my rc.conf but it
doesnt work.
Does anyone known what is
I like to know how do i mount my floopy disk i try:
mount /dev/fd0 /mnt
and
mount /dev/fd0c /mnt
but the anwser is incorrect super block
Thanks
Tiago
_
Unlimited Internet access -- and 2 months free! Try MSN.
Hello there again...
iam trying install a program called iptraf, but i have some problems on the
instalation, i dont know if this is the good place but here it is:
when i make the
make install
appears:
install: unknown group root
What's the problem? Iam the root??
Thanks.
Hello there ...
i've configurated my tunnel ip4-ip6 by typing:
$ifconfig gif0 create
$ifconfig gif0 tunnel 193.137.232.35 193.136.2.2
$ifconfig gif0 inet6 alias 2001:690:2024::1
then i check if the tunnel is woeking by :
$ping6 ff02::1%gif0
and the result was a serals of reply's
then i do
Hello there!
Iam a newbie trying to get start is world of Freebsd, but i have a little
problem conserning the mount of cdrom because i dont no where is the nature
path of it. I trye the command:
mount /dev/cdrom /mnt/cdrom -t iso9660
and
mount /dev/cd0c /mnt/cdrom -t iso9660
but it doesint work.
like to mount their /usr
read-only. This might be a reason to put the tmp and log data
into /var (instead of /usr/local/...). Samba, for example, puts
its temporary data in /var. This might especially be true for
servers.
-Andre
Best regards.
Mihai Serban
AV Development Manager
GeCAD
I have a box running FreeBSD 4.6 and for the past months I've been
trying to bring the box current but I'm running into problems. During
the start of the update I'm receiving the following error message:
function.o: file not recognized: File truncated
*** Error code 1
Stop in
Hello folks,
I'm in the process of building up one of my servers from 4.6 to
CURRENT. I'm receiving the following error message during the 'make
builworld' process and I can't seem to figure out why. I'm going as
far as clearing out my /usr/src directory and 'csvup - supfile' and
that
to generate such
device file ?
Since I assume that your DCF receiver is attached to a serial
port on your machine (mine is), I would do a
cd /dev; ln -s cuaax refclock-0
where x corresponds to the number of your serial port and
assuming the cuaax device is already in there.
-Andre
96 matches
Mail list logo